-
An established power solutions company is seeking an experienced UPS Engineer to join its technical team.
This field based role involves installation, commissioning, maintenance, and repair of Uninterruptible Power Supply or UPS systems and related power equipment across the UK and Europe.
Requirements
Experience as a UPS, Power Systems, or Electrical Engineer.
Strong knowledge of single and three phase UPS systems.
Qualified to City and Guilds or NVQ Level 3 in Electrical Engineering.
Full UK driving licence and passport (for European travel).
Responsibilities
Install, service, and maintain UPS systems and associated power equipment.
Diagnose faults, perform repairs, and carry out preventative maintenance.
Provide technical support and ensure high quality customer service.
Complete accurate service reports and maintain compliance with safety standards.
If you???re a skilled engineer looking for a varied, hands on role with travel and responsibility, we???d like to hear from you. ....Read more...
Type: Permanent Location: Wrexham, Wales
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £48000 Per Annum None
Posted: 2026-01-23 11:48:11
-
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development.
You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry. ....Read more...
Type: Permanent Location: Brackley, England
Start: ASAP
Duration: Permanent
Salary / Rate: £62000 - £75000 Per Annum None
Posted: 2026-01-23 11:23:55
-
We are looking for an experienced Senior Digital Design Lead to drive the development, implementation, and maintenance of CAD and BIM standards across multi-disciplinary engineering projects in the Energy and Resources sector.
You will lead the strategy and governance of digital design, ensuring consistency and quality across platforms like Revit, Civil 3D, and Inventor, while coordinating with UK teams and an offshore design centre.
This hands-on role includes overseeing a team of BIM modellers and supporting complex projects
Key Responsibilities
Degree in Engineering, Architecture, or related field
Proven BIM leadership experience across large-scale, multi-sector projects
Skilled in Autodesk
Strong understanding of CDEs
Knowledge of ISO 19650 standards
Confident communicator with mentoring experience ....Read more...
Type: Permanent Location: Edinburgh, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum None
Posted: 2026-01-23 11:20:46
-
Vehicle Technician - Harlow - Vehicle Technician
Location - Harlow
Salary - £30000 - £38000 - OTE £40000
We are working with a franchised main service centre dealership in the Harlow area who are looking for an experienced Vehicle Technician to join their busy Service Department
The Vehicle Technician role comes with a basic salary of between £30000 - £38000 OTE £40000 with fantastic benefits and opportunities for progression.
- 25 days holiday rising with length of service - plus bank holidays
- Access to our online rewards platform giving you cash back and discounts for multiple retailers
- Preferential Service Rates
- Colleague Purchase Scheme
- Share Incentive Scheme
- Tool Insurance
- Pension
- Enhanced Maternity and Paternity
Key Vehicle Technician Roles and Responsibilities:
- Undertake maintenance, service, and repair activities on motor vehicles to the highest standard
- Carry out all work completely and effectively whilst adhering to manufacturers scheduled times to maintain efficiency
- Effectively record details of diagnosis, work completed, and components utilised in line with group and manufacturer standards
Minimum Vehicle Technician Requirements:
- Qualified to NVQ level 3 (or equivalent)
- Have at least 2 years experience after a qualifying period, of working in a Dealership as a Technician (or similar)
- Good technical knowledge
- Must have a Driving License
If you want to hear more about the Vehicle Technician role, please send us your CV by clicking apply now or by contacting Rachael on 07885881841 or rachael.mortimer@holtrecruitment.com to discuss further.
Vehicle Technician - £24000 - £41000 OTE Main volume brand dealership - Harlow
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
....Read more...
Type: Permanent Location: Harlow,England
Start: 23/01/2026
Salary / Rate: £30000 - £38000 per annum, Benefits: bonus
Posted: 2026-01-23 08:21:04
-
Senior Software Engineer - Aerospace - Ulm (Remote)(C#, SQL Server, TypeScript, JavaScript, Python, Angular)
We are seeking an experienced Senior Software Engineer to join a leading company in the field of aerospace technology and engineering.
As a Senior Software Engineer, you will play a crucial role in designing, maintaining, and developing cutting-edge aerospace applications.
Our client is responsible for the technologies in pilot cockpits for some of the biggest airlines inculding Boeing, American Airlines and Ryanair.
Requirements:
Experience with programming languages such as C#, TypeScript/JavaScript, and Python
Familiarity with libraries and frameworks such as Angular
Knowledge of interfaces such as Graph, REST, Protocol Buffers, and gRPC
Experience with databases such as PostgreSQL, SQL Server, and Timescale DB
Experience with Agile development methodologies and version control systems such as Git
Fluency in German (C1 level or above).
Leadership experience welcome
Responsibilities:
Design, develop, test, and maintain software applications using various programming languages and frameworks.
Develop and implement algorithms and data structures to optimize system performance and efficiency.
Participate in the design and development of new software features and applications.
Coding with C#, SQL Server, TypeScript, JavaScript, Python, Angular
Benefits:
Competitive salary: €60,000 - €90,000 + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Ulm (Remote)
Salary: €60.000 - €90.000 + Bonus Benefits
Applicants for the Senior Software Engineer position must be based in Germany.
NOIRGERMANYREC
NOIREUROPEREC
NOIREURNET
NC/TC/ULM6090 ....Read more...
Type: Permanent Location: Ulm, Germany
Start: ASAP
Salary / Rate: €60000 - €90000 per annum
Posted: 2026-01-23 01:10:45
-
DevOps Engineer - Global Engineering Company - Berlin (Remote)(Tech Stack: Kubernetes, AWS, Azure DevOps, GCP, Jenkins, Docker, GIT, CI/CD Pipelines, Linux)
Client:Our client, a well-known international renewable energy engineering company is seeking a talented DevOps Engineer to join its team in Berlin.
Our Client has over 10,000 employees worldwide and it leads the field in developing innovative solutions that harness the power of the sun, wind, and water.
Due to a recent round of funding, they need three DevOps engineers to help design, deploy, and maintain its cloud infrastructure and DevOps processes.
If you are seeking exciting projects contributing to a sustainable future and an opportunity to work with the latest technologies this is the job for you!
Benefits:
Competitive salary: €70,000 - €95,000 + Bonus Benefits
Opportunity to work on exciting projects that drive positive change
Remote work options with flexible working hours
Comprehensive benefits package, including health insurance, retirement plan, and more
30 Days Annual Leave
Responsibilities:
Collaborate with development and quality assurance teams to develop, modify, and maintain our cloud infrastructure and DevOps processes
Implement and maintain automated CI/CD pipelines to ensure smooth deployment of microservices in test and production environments
Use Infrastructure-as-Code and GitOps technologies to maintain our Kubernetes clusters and infrastructure
Support the team in maintaining legacy applications hosted in Azure
(Familiarity with most of the following technologies: CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Requirements:
Strong knowledge of CI/CD tools (GitHub Actions, Jenkins, Bitbucket Pipelines, Azure DevOps, etc.) and version management tools (git)
Experience with public cloud environments (Azure, AWS, or GCP)
Knowledge of container technologies (Docker, Kubernetes, etc.) and Linux systems
Understanding of Infrastructure-as-Code (Terraform/OpenTofu, Ansible, etc.) and GitOps (e.g.
Flux) technologies
(CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Fluent in English & German
Location: Berlin (Remote)
NOIRGERMANYRECNOIREUROPERECNOIREURNET
NC/TC/CLOBER7095 ....Read more...
Type: Permanent Location: Berlin, Germany
Start: ASAP
Salary / Rate: €70000 - €95000 per annum
Posted: 2026-01-23 01:10:45
-
An exciting opportunity has arisen for a Water Treatment Engineer to join a well-established company providing air and water treatment, maintenance, and commissioning services for HVAC and water systems across commercial, healthcare, and leisure sectors.
As a Water Treatment Engineer, you will be responsible for ensuring water systems are clean, compliant, and fully operational.
This full-time permanent role offers a salary range of £120 - £250 per day and benefits.
You will be responsible for
* Planning and executing pre-commissioning cleaning and flushing programmes for new and refurbished pipework, heating, and chilled water systems.
* Performing high-velocity flushing to meet industry cleanliness standards.
* Applying water treatment chemicals, including biocides, corrosion inhibitors, and scale inhibitors, and adjusting dosages as required.
* Conducting on-site water sampling, testing, and interpreting laboratory results.
* Supporting commissioning teams during system start-up, including maintaining dosing pots, filtration units, and related equipment.
* Maintaining comprehensive site records, logbooks, and final commissioning reports in line with regulatory requirements.
* Acting as the technical point of contact for clients and project teams, troubleshooting water system issues as they arise.
What we are looking for
* Previously worked as a Water Treatment Engineer, Commissioning Engineer, Water Commissioning Engineer, Water Treatment Technician, Water Systems Engineer or in a similar role.
* Proven experience of 3 years in water treatment, commissioning, or flushing engineering.
* Strong knowledge of industry standards and guidelines, such as BSRIA, for pre-commission cleaning and water quality management.
* Valid CSCS card and Full UK driving licence.
* Practical experience in chemical testing and water quality analysis for various systems (e.g., LTHW, chilled water, domestic).
* Ability to calculate system volumes and chemical dosing accurately.
This is a fantastic opportunity for an experienced Water Commissioning and Flushing Engineer to progress their career with a specialist organisation.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Croydon, England
Start:
Duration:
Salary / Rate: £120 - £150 Per Day
Posted: 2026-01-22 16:38:12
-
Health & Safety Advisor - Manufacturing
Are you a proactive Health & Safety professional with a NEBOSH qualification and experience in the manufacturing sector? Our client, a leader in advanced power control systems, is seeking a Health & Safety Advisor to support operational compliance, drive safety initiatives, and embed best practice across the business.
Responsibilities of the Health & Safety Advisor role in Stamford, Lincolnshire include:
Support the business in maintaining compliance with statutory health and safety legislation and company policies.
Conduct risk assessments, audits, and inspections across manufacturing and office environments.
Work closely with production, engineering, and project teams to implement safety procedures and ensure safe working practices.
Investigate incidents, near misses, and accidents, producing reports with recommendations for corrective actions.
Key requirements for the Health & Safety Advisor role in Stamford, Lincolnshire are:
NEBOSH qualification is essential.
Around 2+ years' experience in a health & safety role, ideally within the manufacturing industry.
Solid knowledge of relevant legislation and health & safety best practice.
Strong interpersonal skills with the ability to influence teams and communicate effectively at all levels.
Proactive, organised, and able to manage competing priorities in a dynamic, project-driven environment.
To apply for this Health & Safety Advisor role in Stamford, Lincolnshire, please email ndrain@redlinegroup.Com ....Read more...
Type: Permanent Location: Stamford, England
Start: ASAP
Salary / Rate: £30000 - £35000 per annum
Posted: 2026-01-22 16:04:24
-
Mechanical Engineer - Programme Manager - Drug Delivery Devices
A period of significant growth has created an opportunity for a Programme Manager with a strong Mechanical Engineering background and deep, hands‑on experience in drug delivery device development.
Based in Cambridge, you will lead multiple programmes focused on advancing next‑generation delivery platforms.
Some projects will see you mentoring and guiding junior engineers, while others will require you to take ownership of core mechanical design activities yourself.
We are seeking someone who is currently working at the forefront of drug delivery technologies—such as autoinjectors, inhalers, infusion systems, wearable delivery devices, or other combination products—and who is confident translating complex user, clinical, and regulatory requirements into robust mechanical solutions.
Experience with electro‑mechanical medical devices is highly advantageous, as many of the programmes you will lead involve integrated systems and multidisciplinary collaboration.
To succeed in this role, you will need to be commercially minded, able to balance technical innovation with real‑world product viability.
You should have experience successfully taking medical or drug delivery products through development and into market launch, understanding the commercial, regulatory, and manufacturing considerations that shape decision‑making.
This is a highly collaborative environment, so you must be comfortable working closely with internal teams, external partners, clients, and suppliers to drive programmes forward efficiently and strategically.
A strong academic foundation in Mechanical Engineering or a related discipline is expected.
A master's degree or PhD would be beneficial, but industry experience in developing regulated drug delivery systems is the key requirement.
Familiarity with EN60601 is useful, and a solid working knowledge of ISO 13485 and design controls for combination products is essential.
The technologies you will help shape are genuinely life‑changing—innovative drug delivery systems that improve therapeutic outcomes, enhance patient adherence, and ultimately transform lives on a global scale.
This position involves extensive communication with internal teams, external partners, and clients, so experience in roles requiring regular project updates, stakeholder management, and cross‑functional coordination will be valuable.
Many individuals who excel in this environment have a naturally technical mindset and enjoy hands‑on problem solving—whether that's building drones, programming, tinkering with engines, or similar hobbies.
If this sounds like you, make sure it's visible on your CV.
In return, you'll join a world‑class organisation offering a clear career development pathway, continuous technical training, an excellent salary, bonus scheme, enhanced pension, medical insurance, free meals, and the full suite of benefits expected from a global blue‑chip company.
Interest in this role will be high, so early applications are encouraged.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240.
Alternatively, submit your application and a member of our team will be in touch.
Please note that without a CV, we can only provide limited information. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Pension, bonus, medical etc.
Posted: 2026-01-22 15:23:20
-
Multi-Skilled Maintenance Engineer (Days only)
Location: Northampton
Salary: £50,000
Shift: 4 on 4 off days only
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets.
We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543.
Alternatively, you can send your CV ....Read more...
Type: Permanent Location: Northamptonshire, England
Start: ASAP
Salary / Rate: £49000 - £50000 per annum
Posted: 2026-01-22 14:49:35
-
Multi-Skilled Maintenance Engineer (Nights)
Location: Northampton, Northamptonshire
Salary: £50,000
Shift: Sunday - Thursday,
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets.
We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Fixed Sunday - Thursday night shift
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543.
Alternatively, you can send your CV ....Read more...
Type: Permanent Location: Northamptonshire, England
Start: ASAP
Salary / Rate: £49000 - £50000 per annum
Posted: 2026-01-22 14:40:49
-
A leading upper-tier COMAH chemical manufacturer is seeking an EC&I Engineer to join their Manchester site on a permanent basis.
This role offers a salary of £65,000-£70,000 per annum along with a competitive benefits package including a double-figure employer pension contribution, free on-site parking, company part-subsidised private healthcare, and excellent holiday allowance.
This is a site-based role, working standard days, five days a week.As an EC&I Engineer, you will provide expert Electrical, Control, and Instrumentation engineering support across plant operations, maintenance, and projects.
You will be responsible for improving reliability, safety, and compliance of EC&I systems, delivering minor projects, troubleshooting complex systems, and supporting regulatory requirements on site.Key Responsibilities:
Act as the site's SME for EC&I matters, ensuring safe, reliable, and compliant operation of plant equipment.
Develop and maintain site standards (ATEX, DSEAR, SIL, functional safety) and technical documentation.
Lead or support projects from concept to commissioning, coordinating internal teams and contractors.
Provide guidance to maintenance teams on preventive, predictive, and corrective maintenance.
Troubleshoot and resolve issues across PLCs, DCS, SIS, and field instrumentation.
Participate in COMAH audits, HAZOP/LOPA studies, and regulatory inspections.
Manage minor modifications and plant upgrades, ensuring long-term sustainability of site assets.
Requirements:
Bachelor's degree in Electrical, Control & Instrumentation Engineering or a related discipline.
5-10 years of experience in chemical, petrochemical, or similar high-hazard environments.
Strong knowledge of PLCs, DCS, functional safety (IEC 61508/61511), and electrical distribution systems.
Familiarity with COMAH, ATEX, DSEAR, and hazard assessment methodologies.
Benefits:
Salary: £65,000-£70,000 per annum
Double-figure employer pension contribution
Company part-subsidised private healthcare
Free on-site parking
Excellent holiday allowance
Please apply directly for further information regarding this EC&I Engineer position. ....Read more...
Type: Permanent Location: Manchester, England
Start: ASAP
Salary / Rate: £60000.00 - £70000.00 per annum + DOE - Plus Numerous Benefits
Posted: 2026-01-22 13:55:28
-
Laser Operator
Location: Poole
Salary: Up to £18 per hour
This is an excellent opportunity for a Laser Operator to join a busy sheet metal environment in Poole, working with modern equipment and producing high-quality components to exacting standards.
As a Laser Operator, youll be responsible for setting up, running, and optimising a Bystronic Bysprint 6kW fibre laser, working directly from engineering drawings and job orders.
This Laser Operator role suits someone who is detail-focused, technically confident, and comfortable taking ownership of machine performance and output.
Key responsibilities of the Laser Operator include:
- Setting up and operating a Bystronic Bysprint 6kW fibre laser
- Loading and unloading materials manually or using the ByTrans loader
- Reading and interpreting engineering drawings and work orders
- Programming, adjusting, and optimising laser cutting parameters
- Monitoring machine performance and making real-time adjustments
- Carrying out first-off and in-process quality inspections
- Completing routine maintenance and basic fault-finding
- Maintaining a clean, safe, and organised working area
Essential skills and experience for a Laser Operator:
- Experience operating Bystronic laser machines
- Ability to read technical drawings and use measuring equipment
- Basic CNC and computer skills
- Strong attention to detail and quality standards
- Background in sheet metal fabrication
- Knowledge of laser cutting mild steel, stainless steel, and aluminium
Desirable experience and benefits:
- Forklift licence
- Familiarity with Bysoft nesting software
- Ability to work independently and as part of a team
- Pay up to £18 per hour
- Overtime opportunities and long-term stability
If youre an experienced Laser Operator who wants to be part of a business that values precision, people, and progress, get in touch.
Call Rio at Holt Engineering on 07483025038. ....Read more...
Type: Permanent Location: Waterloo,England
Start: 22/01/2026
Salary / Rate: £18 per hour
Posted: 2026-01-22 12:51:07
-
Are you an experienced Quality Inspector with a strong background in welding and fabrication? Do you enjoy problem-solving, working closely with production teams, and ensuring products meet the highest standards?
We are currently recruiting a Quality Inspector to play a vital role within our manufacturing operation.
You will be responsible for monitoring quality throughout the entire production process, from goods inwards through to final inspection, helping to drive continuous improvement and compliance.
This is an excellent opportunity for a proactive quality professional who thrives in a hands-on manufacturing environment.
Location: Worksop Hours: 40 hours per week | Monday-Thursday between 06:00-16:30 Pay Rate: Up to £17.90 per hour (DOE) circa £37kpa
Key Responsibilities of the Quality Inspector
Inspect product quality at all stages: goods inwards, in-process, and final inspection
Conduct in-process quality audits to ensure build and manufacturing standards are met
Inspect welded, fabricated, and assembled components
Support final vehicle inspections, ensuring compliance with relevant standards and legislation
Accurately record, analyse, and report quality data to identify trends and improvements
Work closely with production and engineering teams to improve processes, consistency, and efficiency
Support continuous improvement and right-first-time manufacturing
Skills & Experience Required Essential:
Proven experience in quality inspection within a manufacturing environment
Strong knowledge of welding and fabrication
Experience with goods inwards inspection, in-process checks, and final inspection
Ability to read and interpret engineering drawings
Strong problem-solving skills with a structured and methodical approach
Desirable:
Familiarity with quality standards and compliance requirements
Experience in vehicle or heavy manufacturing environments
Personal Attributes
Clear and confident communicator at all levels
Highly organised with strong attention to detail
Proactive, positive mindset with a continuous improvement focus
Comfortable using IT systems including Outlook, Word, and Excel
What's on Offer for the Quality Inspector
Competitive hourly rate up to £17.90 DOE (circa £37k)
Stable Monday-Thursday working pattern (early finish!)
Opportunity to play a key role in a quality-focused manufacturing business
Supportive team environment with scope for development
If you would like more information about the Quality Inspector position, please contact Sophie Ranson at E3 Recruitment for a friendly, confidential chat. ....Read more...
Type: Permanent Location: Worksop, England
Start: ASAP
Salary / Rate: £34000 - £40000.00 per annum
Posted: 2026-01-22 12:46:42
-
The Job
The Company: FULLY REMOTE (National Role)
Leading medical devices supplier.
Business is exceeding targets.
Opportunities for career advancement.
Supportive culture, a fun place to work.
Invest in their staff.
The Role of the Territory Manager
Great opportunity for a territory manager in a newly created division for a portfolio of patient-lifting products.
Selling into the Ambulance & Post-Acute Care market (ambulance services - 13 of these across the UK, Community Equipment Stores, Community, Care Homes, District nurses.)
Will have the support of 5 x Telesales people to generate leads for you (You will be expected to generate your own leads as well)
Very strong pipeline, supported by telesales to generate qualified leads.
The plan will be to increase the number of reps as this business unit grows
For now a national role
Benefits of the Territory Manager
£35k-£50k Basic
£24k OTE
24 days holidays + public holidays
5% EE & ER pension contributions
4 x life assurance
Company vehicle - Will be Electric!!
15 paid company sick pay per 12 month rolling period
Company enhanced maternity pay
Birthday leave after 5 years
Permanent Health Insurance
The Ideal Person for the Territory Manager
Background - experience selling to Ambulance Services and/or Post-Acute Services (Care Homes) would be an advantage
Proven sales track record showing suitable over achievement of targets from within the Falls Management market segment in the UK, or related industries
Knowledge and understanding of acute, community, and Falls Management services
Looking for someone who is a good team fit, independent and motivated, drive and energy
Professional skills- sales and Territory Analysis, Budget Management, Presentation skills
Ability to meet frequently with customers and other decision makers
Ability to travel frequently throughout assigned territory
Highly developed interpersonal, networking and influencing skills
Ability to work effectively and cooperatively with others
Proven experience in managing pressure, deadlines and setbacks efficiently while maintaining commitment despite opposition
Excellent written, communication, presentation and interpersonal skills
Good working knowledge of Microsoft® Office
Excellent organisational skills
Strong personal drive
Full clean Driver's licence
If you think the role of Territory Manager is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no.
0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: Birmingham, London, Manchester, Newcastle, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £35000 - £50000 Per Annum Excellent Benefits
Posted: 2026-01-22 08:47:38
-
An Electronics Test Engineer is sought to join an innovative engineering team in Cambridgeshire, contributing to the development and implementation of test solutions for complex electronic products and PCB assemblies.
The Electronics Test Engineer, Cambridgeshire, will be expected to develop your understanding in the field, learning from senior engineers and peers in technical areas and industry best practices.
This may include reading and interpreting customer test specifications, developing Design for Test (DFT) solutions, and supporting production test processes.
Responsibilities include:
Read and interpret customer test specifications and schematics to understand product requirements.
Develop and implement effective DFT and test plans to ensure high product yield and performance.
Serve as a technical point of contact with customer design and technical teams, discussing test requirements, solutions, product design, and improvements.
Investigate and research new testing methods, tools, and procedures to improve test coverage, fault diagnosis, and process efficiency.
Support Operations Test team on equipment specification, operation, product testing, and fault analysis.
Analyse defects and failures in collaboration with Quality, Engineering, and Production teams to implement corrective actions and continuous improvements.
Develop and maintain high-quality documentation, including test reports, SOPs, and customer-facing technical communication.
Work independently or as part of a team across multiple projects, ensuring timely delivery of test solutions.
Key skills & experience:
Minimum degree or equivalent academic qualifications; HNC level acceptable with extensive relevant experience.
Experience in electronic PCB/component testing environments with strong knowledge of electronic hardware.
Proficiency with lab software engineering tools such as LabVIEW and Gerber View; exposure to Embedded C, Python, or similar programming languages advantageous.
Strong analytical and problem-solving skills with high attention to detail.
Competent with Microsoft Office applications, particularly Excel, and capable of producing clear technical reports.
Ability to manage own projects with minimal supervision and work across multiple projects in parallel.
Effective communication skills, both verbal and written, with experience liaising with customers.
How to apply:
Apply now for the Electronics Test Engineer role in Cambridgeshire.
Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821. ....Read more...
Type: Permanent Location: Cambridgeshire, England
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2026-01-22 00:00:04
-
A Production Test Technician is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and verification of high-quality electronic products.
The Production Test Technician, Essex, will play a key role within Pickering's production test team, ensuring the reliability and performance of electronic systems through precise testing, continuous process improvement, and fault analysis.
Responsibilities include:
Working to implemented electronic test plans and procedures.
Performing tests on systems, including both hardware and software components.
Ensuring the reliability and accuracy of test results through continuous improvement initiatives.
Developing a thorough understanding of Pickering's products and systems.
Producing detailed reports of faults found to support ongoing product enhancement.
Assisting in the development of ATE test programs for new products.
Fault finding down to component level and carrying out clean, accurate repairs.
Adapting to new test methods and associated test fixtures/cables.
The Production Test Technician, Essex, will have the following key skills:
A higher-level qualification in Electrical or Electronic Engineering, such as HNC or BTEC Level 3.
Some experience in electronic test, ideally within a manufacturing or R&D environment.
Strong knowledge of electronic test methodologies, tools, and equipment.
Ability to fault-find and test down to component level.
Awareness of industry standards such as ISO 9001 and IPC.
Excellent problem-solving skills, attention to detail, and effective communication.
APPLY NOW - the Production Test Technician job in Essex could be of interest, send your CV to ADighton@RedlineGroup.Com
Or call Adam Dighton on 01582 878821 / 07961 158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £28000 - £31000 per annum
Posted: 2026-01-22 00:00:04
-
A Senior Hardware Design Engineer is sought to join an innovative engineering team in Essex, responsible or leading projects designing, developing, and testing hardware solutions that contribute to our range of high-performance products.
The Senior Hardware Design Engineer, Essex, will lead technical excellence in the field, guiding design and validation practices and mentoring junior engineers, collaborating with senior engineers across hardware, software, mechanical and test domains.
You'll draw on deep engineering expertise, production methodologies, and supplier processes to ensure robust, high-performance product development.
Responsibilities include:
Work with Product Management to define product and design specifications.
Lead in the design and development of digital, analogue, and RF hardware products, providing support to junior engineers.
Create detailed schematics and PCB layouts using Altium Designer.
Perform component selection, simulation, and analysis to ensure optimal performance.
Develop and execute test plans for prototypes and final products.
Conduct debugging and validation using test equipment such as oscilloscopes, logic analysers, and spectrum analysers.
Collaborate with mechanical, software, test, and manufacturing teams to ensure efficient hardware/software integration and delivery.
The Senior Hardware Design Engineer, Essex, will have the following key skills:
Bachelor's or Master's degree in Electronic Engineering, or equivalent industry experience.
Proven experience in hardware design and development with proficiency in Altium Designer.
Expertise in high-speed signal design, RF, power management, and EMI/EMC considerations.
Strong debugging skills with hands-on experience using lab equipment.
Knowledge of FPGA design (VHDL/Verilog) or microcontroller-based systems, with an understanding of embedded software development.
APPLY NOW - Senior Hardware Design Engineer job in Essex could be of interest, send your CV to adighton@redlinegroup.Com or call Adam on 01582878821/ 07961158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £55000 - £63000 per annum
Posted: 2026-01-22 00:00:02
-
An opportunity has arisen for a Maintenance Engineer (CNC Machines) to join a well-established company specialising in precision manufacturing and advanced machinery maintenance solutions.
You will be responsible for providing expert mechanical maintenance and repair support with a wide range of CNC and specialist machinery.
This full-time permanent role offers a salary range of £35,000 and benefits.
You will be responsible for:
* Delivering mechanical maintenance across CNC and precision engineering equipment
* Carrying out repairs to mechanical components such as gearboxes, shafts, pumps, drive chains and bearings
* Diagnosing and resolving breakdowns efficiently to minimise production downtime
* Undertaking planned preventative maintenance activities and machinery refurbishments
* Performing mechanical fault finding, including PLC interrogation where required
* Ensuring all work complies with current health, safety and legal standards
* Supporting maintenance operations across multiple company sites in the Leicester area
What We Are Looking For
* Previously worked as a Maintenance Engineer, Maintenance Technician, Mechanical Maintenance Engineer, Mechanical Engineer, CNC Service Engineer, Mechanical Fitter, or in a similar role
* Possess hands-on experience maintaining CNC machinery
* Skilled in fault finding and repair of multi-axis CNC machines
* Working knowledge of Fanuc and Siemens control systems
* A recognised qualification such as HNC or equivalent in Mechanical Engineering
* Up-to-date understanding of current and emerging maintenance technologies
Shift:
* Timings: 6am - 2pm
* Hours: 37.5 hours per week
This is a fantastic opportunity to join a respected engineering business and further your career within mechanical maintenance
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Leicester, England
Start:
Duration:
Salary / Rate: £35000 - £35000 Per Annum
Posted: 2026-01-21 17:02:47
-
An opportunity has arisen for a Service Engineer (CNC Machines) to join a well-established company specialising in precision manufacturing and advanced machinery maintenance solutions.
You will be responsible for providing expert mechanical maintenance and repair support with a wide range of CNC and specialist machinery.
This full-time permanent role offers a salary range of £35,000 and benefits.
You will be responsible for:
* Delivering mechanical maintenance across CNC and precision engineering equipment
* Carrying out repairs to mechanical components such as gearboxes, shafts, pumps, drive chains and bearings
* Diagnosing and resolving breakdowns efficiently to minimise production downtime
* Undertaking planned preventative maintenance activities and machinery refurbishments
* Performing mechanical fault finding, including PLC interrogation where required
* Ensuring all work complies with current health, safety and legal standards
* Supporting maintenance operations across multiple company sites in the Leicester area
What We Are Looking For
* Previously worked as a Maintenance Engineer, Maintenance Technician, Mechanical Maintenance Engineer, Mechanical Engineer, CNC Service Engineer, Mechanical Fitter, or in a similar role
* Possess hands-on experience maintaining CNC machinery
* Skilled in fault finding and repair of multi-axis CNC machines
* Working knowledge of Fanuc and Siemens control systems
* A recognised qualification such as HNC or equivalent in Mechanical Engineering
* Up-to-date understanding of current and emerging maintenance technologies
Shift:
* Timings: 6am - 2pm
* Hours: 37.5 hours per week
This is a fantastic opportunity to join a respected engineering business and further your career within mechanical maintenance
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Leicester, England
Start:
Duration:
Salary / Rate: £35000 - £35000 Per Annum
Posted: 2026-01-21 16:56:38
-
A Business Development Manager is sought to join an innovative rail technology business in a remote role, contributing to the growth, sales, and deployment of advanced rail vision, analytics, and digital solutions across the UK and international rail markets.
The Business Development Manager, remote, will be expected to develop a deep understanding of the rail sector, customer challenges, and the company's technology portfolio, working closely with senior management and technical teams to drive new business opportunities.
This may include market analysis, stakeholder engagement, solution development, and complex solution-based sales.
Responsibilities include:
Work with senior management and technical teams to identify, develop, and pursue new business opportunities within the UK and global rail sector.
Create and present tailored commercial and technical solutions aligned to customer needs, industry challenges, and digital transformation initiatives.
Develop and execute sales strategies to meet or exceed targets for revenue and profitability.
Identify customer challenges and define short-, medium-, and long-term solutions leveraging existing and next-generation rail technologies.
Collaborate with internal delivery and engineering teams to ensure solutions are viable, competitive, and successfully deployed.
Manage and grow key accounts, building long-term trusted relationships with train operators, owners, manufacturers, and industry stakeholders.
Lead major bids and complex solution-based sales, including opportunities valued in excess of £2M.
Analyse, forecast, and report on new business pipelines and revenue to support in-year and long-term financial objectives.
Oversee the appropriate use of sales processes and tools, ensuring effective project launch and deployment following contract award.
Key skills & experience:
Degree educated or equivalent commercial or engineering industry experience.
Proven experience in business development or solution-based sales within the UK engineering or rail sector.
Strong knowledge of UK rail infrastructure programmes and stakeholder landscape, including Network Rail, ROSCOs, TOCs, and train builders.
Demonstrable experience winning and managing complex, high-value sales opportunities and key accounts.
Ability to translate business needs into end-to-end technical and commercial solutions.
Strong commercial acumen, including financial estimation, forecasting, quotation preparation, and contract negotiation.
Excellent communication, presentation, and stakeholder management skills, with credibility at senior leadership level.
Self-motivated, autonomous, and proactive, with a flexible, “can-do” approach to achieving demanding targets.
How to apply:
Apply now for the Business Development Manager role.
Send your CV to adighton@redlinegroup.Com or call Adam on 01582 878821 ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Salary / Rate: Commission
Posted: 2026-01-21 16:51:47
-
A Project Engineer is sought to join an innovative engineering team in Tyne and Wear, contributing to the delivery of Rail and Defence projects on time, on budget, and to specification.
The Project Engineer, Tyne and Wear, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include multi-disciplined engineering projects, product design, development, build, testing, and verification processes.
Responsibilities include:
Work with multi-disciplined engineering teams and stakeholders to define project requirements and technical specifications.
Create and maintain project schedules, milestone tracking, and technical documentation in line with customer and organisational requirements.
Develop and execute design, development, build, testing, and verification activities for products and equipment across the organisation.
Debug and validate engineering solutions and project deliverables, ensuring alignment with quality standards and safety regulations.
Collaborate with external stakeholders, suppliers, and internal teams to ensure seamless project delivery and resolution of technical issues.
Mentor junior engineers and apprentices, peer review engineering work, and contribute to continuous improvement initiatives.
Maintain comprehensive project-related technical documentation to support audits, compliance, and knowledge sharing.
Key skills & experience:
Degree or equivalent qualification in Engineering or a related discipline.
Experience working on Rail, Defence, or complex technical engineering projects within a multi-disciplined team.
Proficiency with project management tools, engineering documentation, and testing equipment.
Strong problem-solving, analytical, and organisational skills.
Effective communication skills and the ability to work collaboratively with internal teams and external partners.
How to apply:
Apply now for the Project Engineer role in Tyne and Wear.
Send your CV to adighton@redlinegroup.Com or call Adam on 01582 878821 ....Read more...
Type: Permanent Location: Newcastle upon Tyne, England
Start: ASAP
Posted: 2026-01-21 16:16:57
-
JOB DESCRIPTION
DAP is looking to hire R&D Intern for Summer 2026.
Responsibilities:
The summer intern would work under mentorship of a senior scientist to perform collaborative research. The research work would focus on understanding structure-property relationships of raw materials and formulated products through use of analytical testing capabilities such as thermal, rheological, mechanical, surface analysis, etc.
This work will also require test method development for correlation of material properties to real-world applications and performance attributes. Additionally, the summer research project(s) will also focus on developing general lab research skills and provide exposure to new product development.
Pay
$17 / hour.
Requirements
Major: Chemical Engineering, Polymer Engineering, Chemistry. Sophomore, Junior, or Senior. General lab skills (handling chemicals, weighing materials, transferring solids and liquids from one container to another, adherence to lab safety rules) Adept with hands-on work. Some knowledge of organic chemistry, documentation of ideas and experimental details in lab notebook Good time management. Data analysis.
Organized. Good communication skill and time management. Attention to details, inquisitive, good notes taker, desire to learn and grow.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-01-21 14:07:23
-
JOB DESCRIPTION
DAP is looking to hire R&D Intern for Summer 2026.
Responsibilities:
The summer intern would work under mentorship of a senior scientist to perform collaborative research. The research work would focus on understanding structure-property relationships of raw materials and formulated products through use of analytical testing capabilities such as thermal, rheological, mechanical, surface analysis, etc.
This work will also require test method development for correlation of material properties to real-world applications and performance attributes. Additionally, the summer research project(s) will also focus on developing general lab research skills and provide exposure to new product development.
Pay
$17 / hour.
Requirements
Major: Chemical Engineering, Polymer Engineering, Chemistry. Sophomore, Junior, or Senior. General lab skills (handling chemicals, weighing materials, transferring solids and liquids from one container to another, adherence to lab safety rules) Adept with hands-on work. Some knowledge of organic chemistry, documentation of ideas and experimental details in lab notebook Good time management. Data analysis.
Organized. Good communication skill and time management. Attention to details, inquisitive, good notes taker, desire to learn and grow.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-01-21 14:07:20
-
Business Development Manager
Location: UK Remote - Based Midlands or above (regular travel to customer sites across the UK)
An exciting opportunity has arisen for a Business Development Manager to join a well-established UK specialist distributor and manufacturer of high-reliability electronic components.
This full-time, permanent role offers a remote working arrangement (Midlands or further north) with regular UK-wide travel and will suit a commercially driven sales professional with a strong background in B2B technical sales.
This role is ideal for a proactive and ambitious Business Development Manager who enjoys developing new customer relationships, identifying growth opportunities, and representing a technically credible organisation within demanding, high-reliability markets.
Main Responsibilities of the Business Development Manager (UK Remote - Midlands or above):
Identify, develop, and secure new business opportunities with OEMs, CEMs, and Tier 1 contractors across the UK.
Research and target new markets, applications, and sectors aligned with distribution and manufacturing capabilities.
Proactively generate and qualify leads through cold outreach, networking, and industry events.
Arrange and attend customer meetings, product presentations, and technical discussions.
Manage and maintain an accurate sales pipeline, forecasting opportunities and tracking progress.
Work closely with internal sales, product management, and engineering teams to deliver tailored customer solutions.
Provide regular sales activity updates, KPIs, and performance reports to senior management.
Requirements of the Business Development Manager (UK Remote - Midlands or above):
Proven experience in B2B business development or technical sales, ideally within electronics or high-reliability sectors.
Strong communication and presentation skills, with the ability to engage technical and commercial stakeholders.
Ability to work independently and manage a regional sales territory effectively.
Strong commercial awareness with experience negotiating and closing complex sales opportunities.
Full UK driving licence and willingness to travel regularly, including visits to the Mid Wales headquarters.
Knowledge of electronic components (passive, power, or electromechanical) is advantageous.
Experience selling into defence, aerospace, rail, or industrial markets is desirable.
Technical background in electronics, electrical engineering, or a related discipline is beneficial.
Working Pattern & Benefits:
Full-time, permanent role.
UK remote working (Midlands or above) with regular travel to customer sites.
Competitive base salary with performance-related commission.
Pension scheme and additional benefits.
Opportunity to join a respected UK organisation with long-term customer relationships and a strong technical reputation.
To apply for this Business Development Manager role, please send your CV to Kishan Chandarana: kchandarana@redlinegroup.Com or call 01582 878 830 ....Read more...
Type: Permanent Location: England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2026-01-21 14:04:02
