-
JOB DESCRIPTION
Title: Production Supervisor
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
You will be responsible for manufacturing at acceptably efficient levels, meeting production schedules, maintaining a clean and safe work environment, maintaining employee morale, and any employee relation issues.
Essential Functions:
Enforce safety regulations, investigate accidents, complete accident reports as required and eliminate potential and actual safety hazards. Maintain a complete understanding of emergency response plans in the event of spills or other similar disasters. Must adhere to the specific facilities safety process and procedures and follow all PPE requirements.
Report all safety injuries and incidents to your supervisor and EH&S department immediately. Ensure production quality expectations are met. Responsible for understanding all aspects of production schedule. Understand shift production requirements and hold daily meetings to share information with direct reports. Assign employees to specific work stations and tasks. Advise management of equipment and staffing requirements. Maintain housekeeping standards. Interface with other supervisors on all operations, staffing, and miscellaneous issues. Run daily cycle counts.
Input inventory transactions and monitor LN for accuracy.
Responsible for physical inventory, directs cycle counting, and full physical inventories when required. Assure the following shift is properly stocked with supplies and that materials are in sufficient quantities on the production floor to assure a smooth start-up. Responsible for ensuring ISO standards and procedures are followed. Review and approve time card hours in the timekeeping system by 8:30am every Monday morning. Communicate improper equipment operation or downtime to maintenance and coordinate required repairs. Perform annual evaluations and administer training for production employees. Monitor employee performance, coach, council, motivate, and discipline as necessary. Secure and lock facility when applicable. Enforce all company policies and regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner as required by procedure. May be required to train and certify employees on proper use of forklifts. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent. 2 years Supervisory or leadership experience in a manufacturing environment.
May have to occasionally travel to other facilities or training events.
Manage 2nd shift from 2pm-10pm with possible weekends when production schedules demand additional output.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and trainings.
Desired Qualification:
Strong Excel and Microsoft skill set. Lean Manufacturing- Six Sigma- Green Belt. 2-year college degree. Union background a plus.
Physical Requirements:
Occasionally lifts, carries, and moves raw materials or company products weighing up to 100+ pounds..
Exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
(Personal protective equipment would be utilized.) Standing/kneeling/walking/sitting on concrete for approximately 75% of workday.
May be required to operate fork-lift.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
This position will also have the option to work from home 1 day per week after 6 months.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-11-25 14:09:32
-
Production Manager required for a Global leading manufacturer of furniture, representing 13 brands sold across 80 countries.This company employs over 1900 staff globally and are actively searching for a Production Manager for their West Yorkshire manufacturing facility.The successful Production Manager will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Wakefield, Halifax, Brighouse, Barnsley, Dewsbury and Leeds.Key Responsibilities of the Production Manager will include:
Provide leadership and management guidance to the Production function of the business, which includes sixteen direct reports
Ensure the manufacturing process is operating as efficiently as possible, implementing Continuous Improvement, Lean manufacturing and Right first time principles
Develop new Standard Operating Procedures and reduce non-conformance reports and warranty claims
Cultivate and promote a positive workplace culture around Continuous Improvement and quality
Work collaboratively with department leaders to ensure process optimisation
Develop and implement KPI's to drive operational reporting and efficiency
Promote policy and process changes across multiple levels of stakeholders
For the Production Manager , we are keen to receive CV's from candidates who possess:
Experience as a Production Manager or similar, within a Manufacturing environment
Experience leading a multi-discipline manufacturing process
Experience with Lean Manufacturing principles such as Lean Six, 5S and Kaizen.
The ability to implement change management in an established business
Confidence to challenge current processes and justify changes
Salary & Benefits:
£45,000 to £50,000 per annum depending on experience
8% Combined pension (5% Employee and 3% Employer)
Enhanced maternity and Paternity pay
Cycle to work scheme
7am - 4pm Monday to Friday (40 hours per week)
To apply for this position, please click “Apply Now” and attach a copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £45000.00 - £50000.00 per annum
Posted: 2025-11-24 17:03:50
-
JOB DESCRIPTION
Position Summary:
Responsible for processing outbound / inbound warehouse materials, including paperwork, scanning, skid wrapping, and forklift operation to move materials, the loading and unloading of trucks and general warehouse duties.
Essential Functions:
Participates in cycle counting raw materials, in-process, and finished goods as outlined by ISO 9001 SOP
Processes and maintains receiving and shipping documents in accordance with ISO 9001 SOP
Performs the complete set of functions as outlined in ISO 9001 SOP's necessary to receive and store raw materials and finished goods
Identifies, pulls, counts, stages and ships orders.
Process pick-sheets, skid labels, bills of lading documents.
Loads and unloads trucks.
Receives, identifies, generally inspects and counts material as it is received by the Company, and distributes material quickly and efficiently.
Maintains orderliness and cleanliness in receiving and storage areas.
Maintains all pertinent paperwork and distributes it to the appropriate person/departments after receiving process is complete.
Immediately cleans and reports any spills, leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and materials shortages to the Warehouse Supervisor.
Assist in hazardous waste handling when needed under the guidance from production management / supervisors or RCRA certified employees.
Minimum Requirements:
High School Diploma or GED
One year minimum warehouse experience.
Six (6) months previous shipping/receiving or one-year prior general warehouse experience
Forklift operations experience
Preferred Requirements:
Hazmat materials training
Forklift experience in sit-down, Picker, and Bendi lift equipment.
Physical Requirements:
Must pass standard eye examination (corrected or uncorrected)
Bending, squatting, kneeling, lifting - frequent
Must be able to pick up 50# bags
80% - Loading/unloading utilizing forklift
20% - Scanning and Paperwork
Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $16.00/hour and $19.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2025-11-22 22:08:51
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Manufacturing Engineering Intern
Location: Dayton, Nevada
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Step into the action! As a Manufacturing Engineering Intern, you'll collaborate side-by-side with experienced engineers on real-world projects that drive production forward.
This is your chance to get hands-on with cutting-edge processes, immerse yourself in a fast-paced manufacturing environment, and build a powerful professional network that can launch your career.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Dayton, NV for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Carson City, Nevada
Posted: 2025-11-22 22:08:10
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: CI Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Ready to make an impact this summer? As a Continuous Improvement (CI) Intern, you'll dive into real-world manufacturing challenges and help drive smarter, faster, and more efficient production processes.
You'll work side-by-side with experienced engineers, learn Lean Manufacturing principles, and contribute to projects that reduce waste, improve quality, and boost performance.
This is your chance to turn ideas into action and gain hands-on experience in a fast-paced, innovation-driven environment.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering, Chemistry, or a related field.
Available to work 30-40 hours per week from May to August.
Comfortable using Microsoft Office and eager to learn new tools.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude, willingness to learn, and initiative.
Strong excel skills.
Preferred: Passion for process improvement and manufacturing operations and basic understanding of Lean or Six Sigma.
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Gather and analyze production data to uncover trends, inefficiencies, and opportunities for improvement.
Support ongoing process improvement projects using Lean and Six Sigma methodologies.
Create and update clear, user-friendly procedures and training materials.
Participate in/lead team meetings to brainstorm ideas and evaluate process enhancements.
Shadow engineers and quality professionals to gain hands-on insight into manufacturing systems.
Assist with safety and environmental initiatives to promote a responsible and compliant workplace.
Take on additional tasks and projects that support team goals and help build your professional skills.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-11-22 22:08:05
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: CI Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Ready to make an impact this summer? As a Continuous Improvement (CI) Intern, you'll dive into real-world manufacturing challenges and help drive smarter, faster, and more efficient production processes.
You'll work side-by-side with experienced engineers, learn Lean Manufacturing principles, and contribute to projects that reduce waste, improve quality, and boost performance.
This is your chance to turn ideas into action and gain hands-on experience in a fast-paced, innovation-driven environment.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering, Chemistry, or a related field.
Available to work 30-40 hours per week from May to August.
Comfortable using Microsoft Office and eager to learn new tools.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude, willingness to learn, and initiative.
Strong excel skills.
Preferred: Passion for process improvement and manufacturing operations and basic understanding of Lean or Six Sigma.
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Gather and analyze production data to uncover trends, inefficiencies, and opportunities for improvement.
Support ongoing process improvement projects using Lean and Six Sigma methodologies.
Create and update clear, user-friendly procedures and training materials.
Participate in/lead team meetings to brainstorm ideas and evaluate process enhancements.
Shadow engineers and quality professionals to gain hands-on insight into manufacturing systems.
Assist with safety and environmental initiatives to promote a responsible and compliant workplace.
Take on additional tasks and projects that support team goals and help build your professional skills.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-11-22 14:11:30
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Manufacturing Engineering Intern
Location: Dayton, Nevada
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Step into the action! As a Manufacturing Engineering Intern, you'll collaborate side-by-side with experienced engineers on real-world projects that drive production forward.
This is your chance to get hands-on with cutting-edge processes, immerse yourself in a fast-paced manufacturing environment, and build a powerful professional network that can launch your career.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Dayton, NV for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Carson City, Nevada
Posted: 2025-11-22 14:11:27
-
JOB DESCRIPTION
Position Summary:
Responsible for processing outbound / inbound warehouse materials, including paperwork, scanning, skid wrapping, and forklift operation to move materials, the loading and unloading of trucks and general warehouse duties.
Essential Functions:
Participates in cycle counting raw materials, in-process, and finished goods as outlined by ISO 9001 SOP
Processes and maintains receiving and shipping documents in accordance with ISO 9001 SOP
Performs the complete set of functions as outlined in ISO 9001 SOP's necessary to receive and store raw materials and finished goods
Identifies, pulls, counts, stages and ships orders.
Process pick-sheets, skid labels, bills of lading documents.
Loads and unloads trucks.
Receives, identifies, generally inspects and counts material as it is received by the Company, and distributes material quickly and efficiently.
Maintains orderliness and cleanliness in receiving and storage areas.
Maintains all pertinent paperwork and distributes it to the appropriate person/departments after receiving process is complete.
Immediately cleans and reports any spills, leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and materials shortages to the Warehouse Supervisor.
Assist in hazardous waste handling when needed under the guidance from production management / supervisors or RCRA certified employees.
Minimum Requirements:
High School Diploma or GED
One year minimum warehouse experience.
Six (6) months previous shipping/receiving or one-year prior general warehouse experience
Forklift operations experience
Preferred Requirements:
Hazmat materials training
Forklift experience in sit-down, Picker, and Bendi lift equipment.
Physical Requirements:
Must pass standard eye examination (corrected or uncorrected)
Bending, squatting, kneeling, lifting - frequent
Must be able to pick up 50# bags
80% - Loading/unloading utilizing forklift
20% - Scanning and Paperwork
Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $16.00/hour and $19.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2025-11-22 06:09:29
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Install, repair, and maintain commercial roofing systems (flat, metal, TPO, EPDM, etc.). Apply waterproofing sealants and coatings to roofs, flashings, and other surfaces. Apply painting of roofing components, trim, or other structural elements as required. Identify and repair leaks or damaged areas on commercial roofs. Maintain a clean and organized work area. Effective communication with foremen, supervisors, and other WTI and Tremco employees.
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $23.00 and $29.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: San Antonio, Texas
Posted: 2025-11-20 06:09:28
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Install, repair, and maintain commercial roofing systems (flat, metal, TPO, EPDM, etc.). Apply waterproofing sealants and coatings to roofs, flashings, and other surfaces. Apply painting of roofing components, trim, or other structural elements as required. Identify and repair leaks or damaged areas on commercial roofs. Maintain a clean and organized work area. Effective communication with foremen, supervisors, and other WTI and Tremco employees.
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $23.00 and $29.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: San Antonio, Texas
Posted: 2025-11-20 06:09:18
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to:
Lead small projects for improvement of a process or equipment
Collect data for process waste reduction
Edit or create P&IDs
Work alongside Process Engineers on Capital Expense Projects
Conduct meetings to communicate information or collaborate on projects
Serve as a back-up for the Quality Lab Safety
EDUCATION AND EXPERIENCE:
High School diploma required.
Must be a sophomore, junior, or senior in good academic standing, pursing a bachelor's degree in Engineering (Chemical, Mechanical, or Electrical focus preferred)
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-18 14:10:35
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Manager will oversee day to day activities of target manufacturing activities to meet daily, monthly, quarterly, and yearly deadlines and provide leadership for the shift supervisors and associates within the value stream.
Drives the lean process to maximize profitable growth, provides premier customer service, develops a technically qualified workforce, reduce operating cost and inventories through incremental and quantum continuous improvements.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Promotes and ensures a safe and environmentally compliant work environment.
Drives Lean Management - including Tier Meetings, Supervisor Standard Work, Accountability Boards, and overall process discipline.
Responsible for hiring and developing associates, budget planning, employment decisions and performance assessment of shop floor associates.
Operates as part of a Leadership Team responsible for running the factory to specific KPI's and improvement activities.
Utilizes Root Cause Investigation skills and data-driven decision making to implement systematic corrective actions.
Directly manages the departmental cell and works cooperatively with other functional teams.
Leads and guides Lean initiatives within the designated work cell.
Works closely with plant level management on Lean process projects using lean tools and metrics.
Helps develop a Lean Strategy to be implemented plant wide.
Participates in FIT and continuous improvement initiatives using tools such as Lean manufacturing, Six Sigma, and other process improvement techniques.
Leads the production department in meeting or exceeding production goals, including throughput, yield, cost, downtime, scrap, and quality.
managers/supervisor/leaders to optimize the entire value stream.
The Production Manager is relentless about implementing MS168 and continuous improvement.
Works with the Divisional Black Belt to regularly update the Plan's Lean implementation plan.
Makes implementation and results a top priority.
Empowers every employee in the plant through positive reinforcement of Lean.
Responsible for understanding the current culture by reviewing existing policies and procedures.
Performs other duties as assigned or necessary.
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
Education/Experience:
HS Diploma with 8+ years' experience, Engineering Degree with 4 years' experience, OR Non-Engineering Degree with 6 years' experience.
All experience must include time managing people in a manufacturing environment.
Other Skills and Abilities:
Direction of Supervisors and development of workforce.
Install structure and discipline relative to start/stop times and break times, as well as other fixed non-productive (example: vacuum) times.
Define standard work for Kettle and Varnish Operators.
Upgrade Supervision floor presence.
Implement Lean Management.
Tier Meetings, Accountability Board, Follow up on key constraint reductions.
Learn and implement Lean principles.
Evaluate gaps of Actual and Expected Lean performance and address the gaps with the Leadership Team, utilizing the Division Black Belt and other internal resources as required.
Benefits and Compensation:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-18 14:10:35
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to:
Lead small projects for improvement of a process or equipment
Collect data for process waste reduction
Edit or create P&IDs
Work alongside Process Engineers on Capital Expense Projects
Conduct meetings to communicate information or collaborate on projects
Serve as a back-up for the Quality Lab Safety
EDUCATION AND EXPERIENCE:
High School diploma required.
Must be a sophomore, junior, or senior in good academic standing, pursing a bachelor's degree in Engineering (Chemical, Mechanical, or Electrical focus preferred)
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-18 14:10:23
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
The resident expert regarding process technology.
Responsible for investigating and implementing new process technology at the plant.
The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
GENERAL PURPOSE OF THE JOB:
The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training.
Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university.
Relevant experience from internship is acceptable for experience.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-18 14:10:17
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Manager will oversee day to day activities of target manufacturing activities to meet daily, monthly, quarterly, and yearly deadlines and provide leadership for the shift supervisors and associates within the value stream.
Drives the lean process to maximize profitable growth, provides premier customer service, develops a technically qualified workforce, reduce operating cost and inventories through incremental and quantum continuous improvements.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Promotes and ensures a safe and environmentally compliant work environment.
Drives Lean Management - including Tier Meetings, Supervisor Standard Work, Accountability Boards, and overall process discipline.
Responsible for hiring and developing associates, budget planning, employment decisions and performance assessment of shop floor associates.
Operates as part of a Leadership Team responsible for running the factory to specific KPI's and improvement activities.
Utilizes Root Cause Investigation skills and data-driven decision making to implement systematic corrective actions.
Directly manages the departmental cell and works cooperatively with other functional teams.
Leads and guides Lean initiatives within the designated work cell.
Works closely with plant level management on Lean process projects using lean tools and metrics.
Helps develop a Lean Strategy to be implemented plant wide.
Participates in FIT and continuous improvement initiatives using tools such as Lean manufacturing, Six Sigma, and other process improvement techniques.
Leads the production department in meeting or exceeding production goals, including throughput, yield, cost, downtime, scrap, and quality.
managers/supervisor/leaders to optimize the entire value stream.
The Production Manager is relentless about implementing MS168 and continuous improvement.
Works with the Divisional Black Belt to regularly update the Plan's Lean implementation plan.
Makes implementation and results a top priority.
Empowers every employee in the plant through positive reinforcement of Lean.
Responsible for understanding the current culture by reviewing existing policies and procedures.
Performs other duties as assigned or necessary.
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
Education/Experience:
HS Diploma with 8+ years' experience, Engineering Degree with 4 years' experience, OR Non-Engineering Degree with 6 years' experience.
All experience must include time managing people in a manufacturing environment.
Other Skills and Abilities:
Direction of Supervisors and development of workforce.
Install structure and discipline relative to start/stop times and break times, as well as other fixed non-productive (example: vacuum) times.
Define standard work for Kettle and Varnish Operators.
Upgrade Supervision floor presence.
Implement Lean Management.
Tier Meetings, Accountability Board, Follow up on key constraint reductions.
Learn and implement Lean principles.
Evaluate gaps of Actual and Expected Lean performance and address the gaps with the Leadership Team, utilizing the Division Black Belt and other internal resources as required.
Benefits and Compensation:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-18 14:09:58
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
The resident expert regarding process technology.
Responsible for investigating and implementing new process technology at the plant.
The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
GENERAL PURPOSE OF THE JOB:
The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training.
Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university.
Relevant experience from internship is acceptable for experience.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-18 14:09:45
-
Manufacturing Engineer.
Up to £53K DOE, 28 days holiday, 42.5 hours, full-time (flexible with start and finish times ie 7am - 4.30pm/8am - 5.30pm, Permanent
A growing business is looking for a Manufacturing Engineer to support improvements across production, engineering, and after-sales.
You'll focus on optimising workflow, reducing waste, strengthening build quality, and supporting warranty analysis.
This is a hands-on, influential role ideal for someone who enjoys problem-solving and driving process excellence.
Key duties of the Manufacturing Engineer:
, Improve workflow using Lean, Kaizen, and Six Sigma tools , Deliver improvement projects across the business , Review build methods, drawings, and specifications for accuracy , Support warranty investigations and identify root causes , Develop and maintain SOPs and process documents , Analyse data on output, downtime, and product performance , Work across Engineering, Production, and After-Sales teams , Identify trends and introduce corrective or preventive actions , Support compliance, quality standards, and type-approval work
The ideal candidate with have experience in the following:
, Experience applying Lean Manufacturing and Continuous Improvement , Ability to interpret technical drawings and compliance documentation , Strong problem-solving skills and root-cause analysis capability , Confident working with data, KPIs, and performance metrics , Ability to create SOPs, work instructions, and process standards , Excellent communication and ability to work across multiple teamsDesirable:
, Degree or HND in Mechanical, Automotive, or Manufacturing Engineering , Lean Six Sigma Green Belt (or similar) , Experience in HGV manufacturing, vehicle conversions.
, Knowledge of SolidWorks or production analysis toolsIf you would like a private chat about the role before applying - Please contact Rodger Morley at E3 Recruitment. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £48000.00 - £53000.00 per annum
Posted: 2025-11-17 15:13:03
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Lean Manufacturing Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Join our dynamic team at the Green Bay Plant as a Lean Manufacturing Intern, where you'll work directly under the guidance of the Plant Manager to drive impactful change across our operations.
This internship offers hands-on experience in lean principles, data-driven problem solving, and process optimization.
You'll be part of a fast-paced environment focused on eliminating waste, improving efficiency, and supporting key improvement initiatives that make a real difference on the production floor.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Industrial Engineering or a related field.
Preferred: completed of 30 credit hours.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Spot inefficiencies and gather data to guide smarter resource allocation.
Join in on daily improvement huddles and contribute fresh ideas.
Support Focused Improvement Team (FIT) events - including Level 3 Kaizen initiatives.
Help with event prep and follow-up, ensuring momentum and results.
Track cost savings from your improvement efforts and celebrate the wins.
Brainstorm and implement performance-boosting ideas that enhance productivity, communication, and execution.
Apply Lean Six Sigma problem solving tools to help analyze and mitigate a wide range of issues of varying complexity.
Take on special projects and jump into new challenges as they arise.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-11-14 22:09:36
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:10:09
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:10:00
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Process Engineering Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools.
You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies.
This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-11-14 14:09:38
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Lean Manufacturing Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Join our dynamic team at the Green Bay Plant as a Lean Manufacturing Intern, where you'll work directly under the guidance of the Plant Manager to drive impactful change across our operations.
This internship offers hands-on experience in lean principles, data-driven problem solving, and process optimization.
You'll be part of a fast-paced environment focused on eliminating waste, improving efficiency, and supporting key improvement initiatives that make a real difference on the production floor.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Industrial Engineering or a related field.
Preferred: completed of 30 credit hours.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Spot inefficiencies and gather data to guide smarter resource allocation.
Join in on daily improvement huddles and contribute fresh ideas.
Support Focused Improvement Team (FIT) events - including Level 3 Kaizen initiatives.
Help with event prep and follow-up, ensuring momentum and results.
Track cost savings from your improvement efforts and celebrate the wins.
Brainstorm and implement performance-boosting ideas that enhance productivity, communication, and execution.
Apply Lean Six Sigma problem solving tools to help analyze and mitigate a wide range of issues of varying complexity.
Take on special projects and jump into new challenges as they arise.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-11-14 14:09:38
-
JOB DESCRIPTION
Summer 2026 Internship Opportunity!
Title: Process Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 18, 2026 - August 7, 2026), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools.
You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies.
This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-11-14 14:09:32
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:09:32
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Production Supervisor will oversee the day-to-day manufacturing activities of their respective shift to meet daily, monthly, quarterly, and yearly productivity goals.
The position will provide leadership for the hourly associates, driving the lean process to maximize growth, throughput, customer service, and cleanliness.
Other responsibilities include improving workforce flexibility, reducing operating costs, supporting Lean Six Sigma initiatives, including Small K and process improvements, and holding their employees accountable.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Leads the activities of the team members in the production of quality products in accordance with work instructions and company policy, to ensure a quality product delivered on time.
Responsible for implementing and maintaining safety standards, as required by law and company policy.
Implements Skill Sets and job-related training for all employees on the shift.
Coaches and provides technical and Supervisory expertise to resolve processing issues and creates and ensures corrective actions are implemented.
Manages the execution of the Production Schedule.
Supervisory responsibilities include management of employee performance, hiring, discipline, development, and resource planning.
Implements and reviews SOPs and drives compliance standards.
Utilizes problem-solving techniques and teamwork-building strategies to meet or exceed the facility's key operating statistics.
Facilitates workflow management, workforce scheduling, and team members' placement to ensure the facility and company goals are successfully met or exceeded.
Conducts leads or implements the appropriate lean process audits.
Maintains adherence to company policies, standard work, safety standards, and good housekeeping practices.
Learns and performs training on the SAP production modules.
Participates in scheduled Gemba walks and drives resolution to identified wastes and issues.
Uses DAKOTA software as a compliance tool for environmental health and safety.
Leads Daily Tier meetings with Production Associates.
Posts constraints and drives resolution in a timely manner.
Enforces plant housekeeping standards.
Performs other job duties, as assigned.
EDUCATION:
Bachelor's degree from a four-year college or university.
EXPERIENCE:
Four to ten years' related experience and/or training.
Demonstrated experience working hands-on in a manufacturing production environment.
Minimum of three years of direct supervisory experience.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Excellent verbal and written communication.
Proficient in Microsoft Suites and Statistical Analysis.
SAP applications and other Enterprise Resource Planning (ERP) utilization.
Proven facility and leadership.
Labor relations and negotiation.
Interact with all levels of the organization.
Knowledge of arithmetic, "Lean" concepts, Lean Six Sigma, ISO procedures, and their applications.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:09:25
