-
JOB DESCRIPTION
GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and communicates variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects in D365.
Expedites and follows up changes to allow for prescribed quality standards.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check production batches by comparison to standards Advise batchmaker of any necessary adjustments to apply to product batch Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples Record results of comparison in D365 Consult with QC manager on products more than 10% out of product specifications Upon approval of product record data in D365 Check bulk raw materials against standard product specifications upon receipt Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials Calibrate QC/QA equipment as required Other duties as assigned by supervisor/manager QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma Proficient math and written communication skills Good computer skills - knowledge of Excel required Up to three years in industry related QC field helpful Prior batchmaking experience helpful
Specific Knowledge, Skills, and Abilities Required
Successful completion of Munsel Color test, helpful Familiarity with products used in batchmaking processes Familiarity with standard analytical tools
Reasoning Ability
Employee must work with limited supervision following written and verbal instructions.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
Occasional lifting and/or carrying of up to 40 lbs.
Is required.
Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping.
WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory.
Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present.
The company provides any required personal protective equipment.
KEY PERFORMANCE INDICATORS (KPI)
Turnover of correct production batches QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-07-24 15:12:14
-
JOB DESCRIPTION
DAP is seeking a dynamic Quality Technician to join our team at the Baltimore Manufacturing Plant!
Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes:
Pension Plan
401k with Company Match
Health/Dental/Vision Insurance
Paid Parental Leave
Stock Purchase Plan
...and much more!
Under the direction of the Quality Manager and Supervisor, this position will perform various tests and audits of materials/products including raw materials, packaging, and finished goods to ensure compliance with established specifications.
Responsibilities:
Inspection and testing of incoming raw materials
Test, inspect, and approve batch samples
Perform and document equipment calibrations
Execute line and mixer audits throughout the shift to ensure product and process compliance
Ensure all DAP Quality Management System processes are followed
Maintain various reports and computer databases to record activities
Completes all required paperwork accurately and timely
Abides by plant safety policies and maintain appropriate housekeeping in the lab
Skills/Requirements:
1-2 years of experience in quality control
Familiarity with computer software (SAP, WinSPC)
Ability to lift 40 pounds regularly and ability to stand for periods of up to 3 hours
Acute attention to detail
Excellent communication skills within and outside of the Quality department
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-07-24 15:12:14
-
JOB DESCRIPTION
GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and communicates variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects in D365.
Expedites and follows up changes to allow for prescribed quality standards.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check production batches by comparison to standards Advise batchmaker of any necessary adjustments to apply to product batch Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples Record results of comparison in D365 Consult with QC manager on products more than 10% out of product specifications Upon approval of product record data in D365 Check bulk raw materials against standard product specifications upon receipt Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials Calibrate QC/QA equipment as required Other duties as assigned by supervisor/manager QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma Proficient math and written communication skills Good computer skills - knowledge of Excel required Up to three years in industry related QC field helpful Prior batchmaking experience helpful
Specific Knowledge, Skills, and Abilities Required
Successful completion of Munsel Color test, helpful Familiarity with products used in batchmaking processes Familiarity with standard analytical tools
Reasoning Ability
Employee must work with limited supervision following written and verbal instructions.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
Occasional lifting and/or carrying of up to 40 lbs.
Is required.
Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping.
WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory.
Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present.
The company provides any required personal protective equipment.
KEY PERFORMANCE INDICATORS (KPI)
Turnover of correct production batches QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-07-24 15:12:06
-
JOB DESCRIPTION
Title: Technician
Location: St.
Louis, MO
Summary:
Carboline is seeking a Technician to play a key role in bringing Carboline's products to life by expertly applying our industry-leading coatings to panels used by customers, Sales, and R&D.
This hands-on role supports testing, product evaluations, and the creation of impactful sales aids that represent the quality of the Carboline brand.
Minimum Requirements:
High School Diploma or equivalent.
Minimum of 1 year of painting or coating application experience.
Must successfully pass a Jaeger Eye Test.
Physical Requirements:
Ability to lift up to 50 pounds approximately 10% of the time.
Regular exposure to chemicals such as Amines, Polyamides, Isocyanates, Epoxies, Alkyds, and Acrylics.
Must complete an annual respirator medical evaluation and pulmonary function test as required by OSHA (respirator worn ~20% of the time).
Able to operate, maintain, and repair equipment-requiring handling, movement, and strong hand/eye coordination (~35% of the time).
Equipment includes, but is not limited to, airless pumps, blasting equipment, welding tools, and power hand tools.
Essential Functions:
Prepare panels for coating using a variety of tools-including hand tools, power tools, abrasive blast cabinets, and pin welders-and perform routine maintenance to keep equipment running smoothly.
Operate and maintain mixing equipment, airless sprayers, and conventional spray systems to apply Carboline products with consistency and precision.
Accurately document all panel production and, once certified, complete nuclear testing spray orders.
Maintain a well-organized inventory of standard panel systems to support internal and external requests.
Apply a working knowledge of coating technologies to ensure proper application, curing, troubleshooting, and issue resolution.
Partner with the R&D team on product evaluations, new formulations, and equipment trials.
Support Sales and Training teams by assisting with product and equipment demonstrations for customer schools, internal sessions, and hands-on training events.
Help maintain a clean, safe, and organized work environment through daily housekeeping efforts.
Take an active role in hazard recognition and injury prevention by following all safety rules and reporting any incidents immediately.
Use basic computer skills-including Microsoft Office and email-to complete documentation and communication tasks.
Follow all environmental regulations and procedures to ensure hazardous materials and waste are managed responsibly.
Complete required annual training, including RCRA Hazardous Waste and Carboline's Contingency Plan, and apply this knowledge on the job.
Champion all safety and quality standards.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-07-24 15:12:06
-
JOB DESCRIPTION
Title: Technician
Location: St.
Louis, MO
Summary:
Carboline is seeking a Technician to play a key role in bringing Carboline's products to life by expertly applying our industry-leading coatings to panels used by customers, Sales, and R&D.
This hands-on role supports testing, product evaluations, and the creation of impactful sales aids that represent the quality of the Carboline brand.
Minimum Requirements:
High School Diploma or equivalent.
Minimum of 1 year of painting or coating application experience.
Must successfully pass a Jaeger Eye Test.
Physical Requirements:
Ability to lift up to 50 pounds approximately 10% of the time.
Regular exposure to chemicals such as Amines, Polyamides, Isocyanates, Epoxies, Alkyds, and Acrylics.
Must complete an annual respirator medical evaluation and pulmonary function test as required by OSHA (respirator worn ~20% of the time).
Able to operate, maintain, and repair equipment-requiring handling, movement, and strong hand/eye coordination (~35% of the time).
Equipment includes, but is not limited to, airless pumps, blasting equipment, welding tools, and power hand tools.
Essential Functions:
Prepare panels for coating using a variety of tools-including hand tools, power tools, abrasive blast cabinets, and pin welders-and perform routine maintenance to keep equipment running smoothly.
Operate and maintain mixing equipment, airless sprayers, and conventional spray systems to apply Carboline products with consistency and precision.
Accurately document all panel production and, once certified, complete nuclear testing spray orders.
Maintain a well-organized inventory of standard panel systems to support internal and external requests.
Apply a working knowledge of coating technologies to ensure proper application, curing, troubleshooting, and issue resolution.
Partner with the R&D team on product evaluations, new formulations, and equipment trials.
Support Sales and Training teams by assisting with product and equipment demonstrations for customer schools, internal sessions, and hands-on training events.
Help maintain a clean, safe, and organized work environment through daily housekeeping efforts.
Take an active role in hazard recognition and injury prevention by following all safety rules and reporting any incidents immediately.
Use basic computer skills-including Microsoft Office and email-to complete documentation and communication tasks.
Follow all environmental regulations and procedures to ensure hazardous materials and waste are managed responsibly.
Complete required annual training, including RCRA Hazardous Waste and Carboline's Contingency Plan, and apply this knowledge on the job.
Champion all safety and quality standards.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-07-24 15:11:59
-
JOB DESCRIPTION
GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and communicates variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects in D365.
Expedites and follows up changes to allow for prescribed quality standards.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check production batches by comparison to standards Advise batchmaker of any necessary adjustments to apply to product batch Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples Record results of comparison in D365 Consult with QC manager on products more than 10% out of product specifications Upon approval of product record data in D365 Check bulk raw materials against standard product specifications upon receipt Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials Calibrate QC/QA equipment as required Other duties as assigned by supervisor/manager QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma Proficient math and written communication skills Good computer skills - knowledge of Excel required Up to three years in industry related QC field helpful Prior batchmaking experience helpful
Specific Knowledge, Skills, and Abilities Required
Successful completion of Munsel Color test, helpful Familiarity with products used in batchmaking processes Familiarity with standard analytical tools
Reasoning Ability
Employee must work with limited supervision following written and verbal instructions.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
Occasional lifting and/or carrying of up to 40 lbs.
Is required.
Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping.
WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory.
Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present.
The company provides any required personal protective equipment.
KEY PERFORMANCE INDICATORS (KPI)
Turnover of correct production batches QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-07-24 15:11:44
-
JOB DESCRIPTION
DAP is seeking a dynamic Quality Technician to join our team at the Baltimore Manufacturing Plant!
Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes:
Pension Plan
401k with Company Match
Health/Dental/Vision Insurance
Paid Parental Leave
Stock Purchase Plan
...and much more!
Under the direction of the Quality Manager and Supervisor, this position will perform various tests and audits of materials/products including raw materials, packaging, and finished goods to ensure compliance with established specifications.
Responsibilities:
Inspection and testing of incoming raw materials
Test, inspect, and approve batch samples
Perform and document equipment calibrations
Execute line and mixer audits throughout the shift to ensure product and process compliance
Ensure all DAP Quality Management System processes are followed
Maintain various reports and computer databases to record activities
Completes all required paperwork accurately and timely
Abides by plant safety policies and maintain appropriate housekeeping in the lab
Skills/Requirements:
1-2 years of experience in quality control
Familiarity with computer software (SAP, WinSPC)
Ability to lift 40 pounds regularly and ability to stand for periods of up to 3 hours
Acute attention to detail
Excellent communication skills within and outside of the Quality department
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-07-24 15:11:31
-
JOB DESCRIPTION
Title: Technician
Location: St.
Louis, MO
Summary:
Carboline is seeking a Technician to play a key role in bringing Carboline's products to life by expertly applying our industry-leading coatings to panels used by customers, Sales, and R&D.
This hands-on role supports testing, product evaluations, and the creation of impactful sales aids that represent the quality of the Carboline brand.
Minimum Requirements:
High School Diploma or equivalent.
Minimum of 1 year of painting or coating application experience.
Must successfully pass a Jaeger Eye Test.
Physical Requirements:
Ability to lift up to 50 pounds approximately 10% of the time.
Regular exposure to chemicals such as Amines, Polyamides, Isocyanates, Epoxies, Alkyds, and Acrylics.
Must complete an annual respirator medical evaluation and pulmonary function test as required by OSHA (respirator worn ~20% of the time).
Able to operate, maintain, and repair equipment-requiring handling, movement, and strong hand/eye coordination (~35% of the time).
Equipment includes, but is not limited to, airless pumps, blasting equipment, welding tools, and power hand tools.
Essential Functions:
Prepare panels for coating using a variety of tools-including hand tools, power tools, abrasive blast cabinets, and pin welders-and perform routine maintenance to keep equipment running smoothly.
Operate and maintain mixing equipment, airless sprayers, and conventional spray systems to apply Carboline products with consistency and precision.
Accurately document all panel production and, once certified, complete nuclear testing spray orders.
Maintain a well-organized inventory of standard panel systems to support internal and external requests.
Apply a working knowledge of coating technologies to ensure proper application, curing, troubleshooting, and issue resolution.
Partner with the R&D team on product evaluations, new formulations, and equipment trials.
Support Sales and Training teams by assisting with product and equipment demonstrations for customer schools, internal sessions, and hands-on training events.
Help maintain a clean, safe, and organized work environment through daily housekeeping efforts.
Take an active role in hazard recognition and injury prevention by following all safety rules and reporting any incidents immediately.
Use basic computer skills-including Microsoft Office and email-to complete documentation and communication tasks.
Follow all environmental regulations and procedures to ensure hazardous materials and waste are managed responsibly.
Complete required annual training, including RCRA Hazardous Waste and Carboline's Contingency Plan, and apply this knowledge on the job.
Champion all safety and quality standards.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-07-24 15:11:26
-
JOB DESCRIPTION
DAP is seeking a dynamic Quality Technician to join our team at the Baltimore Manufacturing Plant!
Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes:
Pension Plan
401k with Company Match
Health/Dental/Vision Insurance
Paid Parental Leave
Stock Purchase Plan
...and much more!
Under the direction of the Quality Manager and Supervisor, this position will perform various tests and audits of materials/products including raw materials, packaging, and finished goods to ensure compliance with established specifications.
Responsibilities:
Inspection and testing of incoming raw materials
Test, inspect, and approve batch samples
Perform and document equipment calibrations
Execute line and mixer audits throughout the shift to ensure product and process compliance
Ensure all DAP Quality Management System processes are followed
Maintain various reports and computer databases to record activities
Completes all required paperwork accurately and timely
Abides by plant safety policies and maintain appropriate housekeeping in the lab
Skills/Requirements:
1-2 years of experience in quality control
Familiarity with computer software (SAP, WinSPC)
Ability to lift 40 pounds regularly and ability to stand for periods of up to 3 hours
Acute attention to detail
Excellent communication skills within and outside of the Quality department
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-07-24 15:11:23
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication.
All required job information should be completed promptly via the required tools and resources.
Must be familiar with all forms of low slope roofing systems.
Must be knowledgeable with Tremco line of products and proper applications
Daily responsibilities include, but are not limited to:
Review and confirm all work orders scheduled.
Completion of all safety related activities using the designated tools mandated by Tremco
Take photos to document phases of work performed on the job
Job Site Inspection specific:
Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific
Check materials for specification compliance, material type and proper storage
Walk the roof with the Foreman.
Address proper drainage, staging, application and details
Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Des Moines, Iowa
Posted: 2026-07-24 15:11:16
-
An opportunity has arisen for a Warehouse Operative / Counterbalance Forklift Driver to join a well-established company offering warehousing, pick-and-pack, and distribution services for ecommerce and retail businesses.
As a Warehouse Operative / Counterbalance Forklift Driver, you will be responsible for the safe handling, storage and movement of goods while supporting efficient warehouse operations.
This role offers a salary of £27,180 and benefits.
Internal training will be provided for VNA (Very Narrow Aisle) licence.
You will be responsible for:
* Operating warehouse equipment safely and in line with company procedures.
* Loading, unloading and moving stock within the warehouse.
* Using forklift trucks, pallet trucks and other material handling equipment to transport goods.
* Picking, packing and preparing customer orders for dispatch where required.
* Carrying out goods receipt checks, load inspections and stock counts.
* Using RF scanners and warehouse systems to manage inventory accurately.
* Ensuring inbound and outbound goods are accurate and reporting any damaged or incorrect items.
* Completing routine equipment inspections and reporting any faults.
* Maintaining a clean, organised and safe working environment.
* Following health and safety, quality and hygiene procedures at all times.
What we are looking for:
* Previously worked as a Warehouse Operative, Forklift Driver, Warehouse Assistant, Warehouse Operator, Warehouse Technician, FLT Driver, Counterbalance Forklift Driver, Forklift Truck Driver, Warehouse FLT Operative, Forklift Operative, Materials Handler, Goods In Operative, Goods Out Operative, Warehouse Worker, Warehouse Picker, Forklift Operator or in a similar role.
* A valid Counterbalance (CB) Forklift Licence is essential.
* Confidence operating material handling equipment safely.
* Ability to carry out stock control, order picking and goods handling duties.
* Reliable, flexible and able to work effectively as part of a team.
Shift:
* Monday to Friday: 9:00am - 6:00pm.
This is an excellent opportunity for a Warehouse Operative / Counterbalance Forklift Driver to join a respected organisation and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Slough, England
Start:
Duration:
Salary / Rate: £27180 - £27180 Per Annum
Posted: 2026-07-24 10:14:18
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication.
All required job information should be completed promptly via the required tools and resources.
Must be familiar with all forms of low slope roofing systems.
Must be knowledgeable with Tremco line of products and proper applications
Daily responsibilities include, but are not limited to:
Review and confirm all work orders scheduled.
Completion of all safety related activities using the designated tools mandated by Tremco
Take photos to document phases of work performed on the job
Job Site Inspection specific:
Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific
Check materials for specification compliance, material type and proper storage
Walk the roof with the Foreman.
Address proper drainage, staging, application and details
Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Saint Paul, Minnesota
Posted: 2026-07-24 07:12:05
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication.
All required job information should be completed promptly via the required tools and resources.
Must be familiar with all forms of low slope roofing systems.
Must be knowledgeable with Tremco line of products and proper applications
Daily responsibilities include, but are not limited to:
Review and confirm all work orders scheduled.
Completion of all safety related activities using the designated tools mandated by Tremco
Take photos to document phases of work performed on the job
Job Site Inspection specific:
Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific
Check materials for specification compliance, material type and proper storage
Walk the roof with the Foreman.
Address proper drainage, staging, application and details
Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Des Moines, Iowa
Posted: 2026-07-24 07:12:04
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofing Inspectors to join our team.
$20-33/hour (not including prevailing wage)
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication.
All required job information should be completed promptly via the required tools and resources.
Must be familiar with all forms of low slope roofing systems.
Must be knowledgeable with Tremco line of products and proper applications
Daily responsibilities include, but are not limited to:
Review and confirm all work orders scheduled.
Completion of all safety related activities using the designated tools mandated by Tremco
Take photos to document phases of work performed on the job
Job Site Inspection specific:
Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific
Check materials for specification compliance, material type and proper storage
Walk the roof with the Foreman.
Address proper drainage, staging, application and details
Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Saint Paul, Minnesota
Posted: 2026-07-24 07:12:03
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
Foreman also ensures that all technicians complete Daily Hazard Analysis.
Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with:
WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule.
Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
OTHER SKILLS AND ABILITIES:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
30-hour OSHA certification
Registered Roof Observer (RRO) preferred but not required.
Minimum of five years of experience in the roofing industry.
Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tulsa, Oklahoma
Posted: 2026-07-22 23:12:46
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
Foreman also ensures that all technicians complete Daily Hazard Analysis.
Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with:
WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule.
Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
OTHER SKILLS AND ABILITIES:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
30-hour OSHA certification
Registered Roof Observer (RRO) preferred but not required.
Minimum of five years of experience in the roofing industry.
Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tulsa, Oklahoma
Posted: 2026-07-22 15:25:14
-
Plant Instrument Technician required to work as part of an industrial chemical plant support and improvement team.
Requirements
Instrumented Systems experience in a refinery, chemical or allied industry.
Apprenticeship or traineeship scheme.
City and Guilds, ONC, HNC or other qualifications in relevant subject.
Hazardous area equipment training CompEx or equivalent.
Responsibilities
Instrument maintenance and repair.
Production critical inspection and repairs.
Installation and commissioning, equipment review.
Order and manage spares and equipment from suppliers maintaining adequate economic stores of materials, equipment and tools.
Liaise with instrument, electrical and other specialist engineers. ....Read more...
Type: Permanent Location: Southampton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £36000 - £52000 Per Annum None
Posted: 2026-07-22 11:12:57
-
Chemical Process Instrument Technician required to work as part of an maintenance, repair and commissioning team who look after sensors, electrical and electronic chemical process equipment and instruments.
Requirements
Instrumented Systems experience in a refinery, chemical or allied industry.
Apprenticeship or traineeship scheme.
City and Guilds, ONC, HNC or other qualifications in relevant subject.
Hazardous area equipment training CompEx or equivalent.
Responsibilities
Instrument maintenance and repair.
Production critical inspection and repairs.
Installation and commissioning, equipment review.
Order and manage spares and equipment from suppliers maintaining adequate economic stores of materials, equipment and tools.
Liaise with instrument, electrical and other specialist engineers. ....Read more...
Type: Permanent Location: Southampton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £42000 Per Annum None
Posted: 2026-07-22 11:12:53
-
Join a global technology company driving energy innovation and sustainability.
This role involves working in a chemical manufacturing environment.
Key Responsibilities:
Perform planned and breakdown instrument maintenance.
Support project installations, commissioning, and drawings review.
Assist or supervise contractors and service personnel.
Execute critical repairs and inspections safely and efficiently.
Procure and maintain materials, equipment, and tools.
Liaise with instrument, electrical, and other specialist engineers.
Participate in audits, safety initiatives, and develop safe working practices.
Key Skills
Recognised apprenticeship or technical qualification (ONC, HNC)
Minimum Five years of experience in refinery, chemical, or related industries.
Approved to work on hazardous area equipment
Strong communication and teamwork skills, proactive attitude. ....Read more...
Type: Permanent Location: Southampton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £45000 Per Annum None
Posted: 2026-07-22 11:10:46
-
We are looking for motivated and hands-on Manufacturing Technician to join a team based in Batley.
This Manufacturing Technician role is ideal for someone at an early stage of their career who is keen to gain practical experience in a manufacturing and R&D environment, or who can bring experience from a similar setting.
As a Manufacturing Technician, you will support production activities, assist with equipment preparation, and help maintain organised and safe workspace.
This is role is a temporary contract, with the potential to become permanent dependent on performance! Roles & Responsibilities of Manufacturing Technician:
Assemble robotic systems and sub-assemblies.
Complete mechanical assembly, wiring, soldering, and PCB component installation.
Support prototype builds, testing, and production activities.
Prepare parts, tools, and materials for assembly.
Follow assembly instructions and maintain build records.
Maintain a safe, clean, and organised workshop.
Contribute to continuous improvement of production processes.
Follow health and safety procedures, including PPE requirements
Qualifications & Experience Required from Manufacturing Technician:
An interest or some exposure to manufacturing, production, or workshop environments and be keen to learn and follow instructions accurately.
Be practical, reliable, and well organised, with good attention to detail and a positive attitude toward hands-on work.
Experience with hand tools, workshop equipment, mechanical or electrical systems, or site-based work is beneficial but not essential, as full training will be provided.
Soldering experience is desirable but not essential.
If you are ready to take the next step in your career and have the right attitude and willingness to learn, we would like to hear from you.
This is a great opportunity to build hands-on experience as a Manufacturing Technician in a growing and innovative environment, so apply now to join the team. ....Read more...
Type: Contract Location: Batley, England
Start: ASAP
Salary / Rate: Up to £12.71 per hour
Posted: 2026-07-22 09:20:57
-
JOB DESCRIPTION
Line Technician
Fulltime position Air-Condition Work Environment
Monday- Thursday 4:00pm-2:30amFull benefit package on day 30 including:
Medical- Major medical coverage including prescription drug and infertility benefits.Dental- Coverage for various dental needs including orthodontia.Vision- Coverage for routine eyecare including an allowance for frames or contacts.Long-Term Disability- 100% company paid coverage for employees unable to work due to disability.
Coverage provides for a portion of pre-disability earnings to be paid to the employee.
* Short-Term Disability- 100% company paid coverage for employees unable to work due to disability.
Coverage provides for a portion of pre-disability earnings to be paid to the employee.
*Life Insurance- 100% company paid coverage of two times earnings.
Employees may purchase additional coverage at group rates.Dependent Life Insurance- Employees may purchase additional coverage at group rates.Accidental Death & Dismemberment Insurance- 100% company paid coverage of two times.
Employees may purchase additional coverage at group rates.Health Care and Day Care Reimbursement- Allows employees to set aside pre-tax dollars to reimburse themselves for certain health care and day care expenses.Employee Stock Purchase PlanDefined Benefit Pension Plan401(K)- Company matches 100% of the first 3% contributed and 50% of 4th and 5th % contributed.11 Paid HolidaysPTO- Starts on hire date, accrue 80 hours first calendar year.Parental Leave- Up to 80 hours of paid parental leave.DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.
As a Maintenance Technician at DAP's Pacific Plant, you will be a member of the plant Maintenance team responsible for monitoring aerosol filling operations to ensure standards for quality and productivity are met.
Responsibilities:
• Start-up, monitor, perform major adjustments and shut down fill line equipment.
Open and close building, making sure building is secure.
Work without supervisor or lead tech.
Start up equipment, air compressor, pumps, line, labeler.
Run production line after set up and make any major or minor repairs necessary.
Unloading material from trucks, mix a batch of material if needed- Building maintenance.
• Assist aerosol machine associates and temporary personnel involved in the operation of aerosol equipment.
Assist in training of new technicians, installing new equipment, work with aerosol machine associates and answer any questions concerning adjustments on equipment.
• Perform and record results of inspections of label applications, capping and pressure seals, can weights.
• Stage consumable supplies such as labels, glue, straws, cans and caps to ensure continuous flow of filling operations.
• Perform line conversions to prepare new products for filling operations.
• Ensure proper use of raw materials, finished goods, scrap and rejects.
Complete and submit requisitions to request or return materials to stock.
Check in all materials according to the work order.
• Dispose of scrap cans, spills or ruptured cans, spraying out contents of scrap cans and cleaning leaked product from machinery, floors, walls, etc.
• Maintain cleanliness and safety of machines and work area.
• Diagnose, troubleshoot, repair and rebuild equipment (PM).
Diagnose problems, work with engineers, supervisors, co-workers to get the problem solved.
Maintains PM's, rebuild gas pumps, material pumps, boosters, gas boosters, etc.
Operate milling machines, drill presses, tools and measuring tools.
• Develop ways to increase the effectiveness of machines and equipment.
Install new piping, improve designs of machines and equipment.
Requirements:
• Education: Equivalent to a basic high school education and formal training in a technical field with certificate of completion.
• Experience: One year of experience in a similar or related position.
DAP is an Equal Opportunity EmployerRelated keywords: mechanic, diesel mechanic, maintenance
Job Type: Full-time
Benefits:
401(k)401(k) matchingDental insuranceEmployee assistance programEmployee discountFlexible spending accountHealth insuranceLife insurancePaid time offParental leaveProfessional development assistanceReferral programRetirement planTuition reimbursementVision insurancePeople with a criminal record are encouraged to apply
Experience:
Programmable Logic Controllers: 1 year (Preferred)Maintenance: 3 years (Required)Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Jefferson City, Missouri
Posted: 2026-07-21 15:28:26
-
JOB DESCRIPTION
Line Technician
Fulltime position Air-Condition Work Environment
Monday- Thursday 4:00pm-2:30amFull benefit package on day 30 including:
Medical- Major medical coverage including prescription drug and infertility benefits.Dental- Coverage for various dental needs including orthodontia.Vision- Coverage for routine eyecare including an allowance for frames or contacts.Long-Term Disability- 100% company paid coverage for employees unable to work due to disability.
Coverage provides for a portion of pre-disability earnings to be paid to the employee.
* Short-Term Disability- 100% company paid coverage for employees unable to work due to disability.
Coverage provides for a portion of pre-disability earnings to be paid to the employee.
*Life Insurance- 100% company paid coverage of two times earnings.
Employees may purchase additional coverage at group rates.Dependent Life Insurance- Employees may purchase additional coverage at group rates.Accidental Death & Dismemberment Insurance- 100% company paid coverage of two times.
Employees may purchase additional coverage at group rates.Health Care and Day Care Reimbursement- Allows employees to set aside pre-tax dollars to reimburse themselves for certain health care and day care expenses.Employee Stock Purchase PlanDefined Benefit Pension Plan401(K)- Company matches 100% of the first 3% contributed and 50% of 4th and 5th % contributed.11 Paid HolidaysPTO- Starts on hire date, accrue 80 hours first calendar year.Parental Leave- Up to 80 hours of paid parental leave.DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.
As a Maintenance Technician at DAP's Pacific Plant, you will be a member of the plant Maintenance team responsible for monitoring aerosol filling operations to ensure standards for quality and productivity are met.
Responsibilities:
• Start-up, monitor, perform major adjustments and shut down fill line equipment.
Open and close building, making sure building is secure.
Work without supervisor or lead tech.
Start up equipment, air compressor, pumps, line, labeler.
Run production line after set up and make any major or minor repairs necessary.
Unloading material from trucks, mix a batch of material if needed- Building maintenance.
• Assist aerosol machine associates and temporary personnel involved in the operation of aerosol equipment.
Assist in training of new technicians, installing new equipment, work with aerosol machine associates and answer any questions concerning adjustments on equipment.
• Perform and record results of inspections of label applications, capping and pressure seals, can weights.
• Stage consumable supplies such as labels, glue, straws, cans and caps to ensure continuous flow of filling operations.
• Perform line conversions to prepare new products for filling operations.
• Ensure proper use of raw materials, finished goods, scrap and rejects.
Complete and submit requisitions to request or return materials to stock.
Check in all materials according to the work order.
• Dispose of scrap cans, spills or ruptured cans, spraying out contents of scrap cans and cleaning leaked product from machinery, floors, walls, etc.
• Maintain cleanliness and safety of machines and work area.
• Diagnose, troubleshoot, repair and rebuild equipment (PM).
Diagnose problems, work with engineers, supervisors, co-workers to get the problem solved.
Maintains PM's, rebuild gas pumps, material pumps, boosters, gas boosters, etc.
Operate milling machines, drill presses, tools and measuring tools.
• Develop ways to increase the effectiveness of machines and equipment.
Install new piping, improve designs of machines and equipment.
Requirements:
• Education: Equivalent to a basic high school education and formal training in a technical field with certificate of completion.
• Experience: One year of experience in a similar or related position.
DAP is an Equal Opportunity EmployerRelated keywords: mechanic, diesel mechanic, maintenance
Job Type: Full-time
Benefits:
401(k)401(k) matchingDental insuranceEmployee assistance programEmployee discountFlexible spending accountHealth insuranceLife insurancePaid time offParental leaveProfessional development assistanceReferral programRetirement planTuition reimbursementVision insurancePeople with a criminal record are encouraged to apply
Experience:
Programmable Logic Controllers: 1 year (Preferred)Maintenance: 3 years (Required)Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Jefferson City, Missouri
Posted: 2026-07-21 15:28:07
-
JOB DESCRIPTION
Essential Functions
Participates in cycle counting raw materials, in-process, and finished goods as outlined by ISO 9001 SOP
Processes and maintains receiving and shipping documents in accordance with ISO 9001 SOP
Performs the complete set of functions as outlined in ISO 9001 SOP's necessary to receive and store raw materials and finished goods
Identifies, pulls, counts, stages and ships orders.
Process pick-sheets, skid labels, bills of lading documents.
Loads and unloads trucks.
Receives, identifies, generally inspects and counts material as it is received by the Company, and distributes material quickly and efficiently.
Maintains orderliness and cleanliness in receiving and storage areas.
Maintains all pertinent paperwork and distributes it to the appropriate person/departments after receiving process is complete.
Immediately cleans and reports any spills, leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and materials shortages to the Warehouse Supervisor.
Assist in hazardous waste handling when needed under the guidance from production management / supervisors or RCRA certified employees.
Minimum Requirements
High school diploma or GED in lieu of a diploma, a combination of experience and education may be considered.
One year minimum warehouse experience.
Six (6) months previous shipping/receiving or one-year prior general warehouse experience
Forklift operations experience
Preferred Requirements
Hazmat materials training
Forklift experience in sit-down, Picker, and Bendi lift equipment.
Physical Requirements
Must pass standard eye examination (corrected or uncorrected)
Bending, squatting, kneeling, lifting - frequent
Must be able to pick up 50# bags
80% - Loading/unloading utilizing forklift
20% - Scanning and Paperwork
Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $18.00/hour and $20.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2026-07-21 15:19:55
-
JOB DESCRIPTION
Line Technician
Fulltime position Air-Condition Work Environment
Monday- Thursday 4:00pm-2:30amFull benefit package on day 30 including:
Medical- Major medical coverage including prescription drug and infertility benefits.Dental- Coverage for various dental needs including orthodontia.Vision- Coverage for routine eyecare including an allowance for frames or contacts.Long-Term Disability- 100% company paid coverage for employees unable to work due to disability.
Coverage provides for a portion of pre-disability earnings to be paid to the employee.
* Short-Term Disability- 100% company paid coverage for employees unable to work due to disability.
Coverage provides for a portion of pre-disability earnings to be paid to the employee.
*Life Insurance- 100% company paid coverage of two times earnings.
Employees may purchase additional coverage at group rates.Dependent Life Insurance- Employees may purchase additional coverage at group rates.Accidental Death & Dismemberment Insurance- 100% company paid coverage of two times.
Employees may purchase additional coverage at group rates.Health Care and Day Care Reimbursement- Allows employees to set aside pre-tax dollars to reimburse themselves for certain health care and day care expenses.Employee Stock Purchase PlanDefined Benefit Pension Plan401(K)- Company matches 100% of the first 3% contributed and 50% of 4th and 5th % contributed.11 Paid HolidaysPTO- Starts on hire date, accrue 80 hours first calendar year.Parental Leave- Up to 80 hours of paid parental leave.DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.
As a Maintenance Technician at DAP's Pacific Plant, you will be a member of the plant Maintenance team responsible for monitoring aerosol filling operations to ensure standards for quality and productivity are met.
Responsibilities:
• Start-up, monitor, perform major adjustments and shut down fill line equipment.
Open and close building, making sure building is secure.
Work without supervisor or lead tech.
Start up equipment, air compressor, pumps, line, labeler.
Run production line after set up and make any major or minor repairs necessary.
Unloading material from trucks, mix a batch of material if needed- Building maintenance.
• Assist aerosol machine associates and temporary personnel involved in the operation of aerosol equipment.
Assist in training of new technicians, installing new equipment, work with aerosol machine associates and answer any questions concerning adjustments on equipment.
• Perform and record results of inspections of label applications, capping and pressure seals, can weights.
• Stage consumable supplies such as labels, glue, straws, cans and caps to ensure continuous flow of filling operations.
• Perform line conversions to prepare new products for filling operations.
• Ensure proper use of raw materials, finished goods, scrap and rejects.
Complete and submit requisitions to request or return materials to stock.
Check in all materials according to the work order.
• Dispose of scrap cans, spills or ruptured cans, spraying out contents of scrap cans and cleaning leaked product from machinery, floors, walls, etc.
• Maintain cleanliness and safety of machines and work area.
• Diagnose, troubleshoot, repair and rebuild equipment (PM).
Diagnose problems, work with engineers, supervisors, co-workers to get the problem solved.
Maintains PM's, rebuild gas pumps, material pumps, boosters, gas boosters, etc.
Operate milling machines, drill presses, tools and measuring tools.
• Develop ways to increase the effectiveness of machines and equipment.
Install new piping, improve designs of machines and equipment.
Requirements:
• Education: Equivalent to a basic high school education and formal training in a technical field with certificate of completion.
• Experience: One year of experience in a similar or related position.
DAP is an Equal Opportunity EmployerRelated keywords: mechanic, diesel mechanic, maintenance
Job Type: Full-time
Benefits:
401(k)401(k) matchingDental insuranceEmployee assistance programEmployee discountFlexible spending accountHealth insuranceLife insurancePaid time offParental leaveProfessional development assistanceReferral programRetirement planTuition reimbursementVision insurancePeople with a criminal record are encouraged to apply
Experience:
Programmable Logic Controllers: 1 year (Preferred)Maintenance: 3 years (Required)Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Jefferson City, Missouri
Posted: 2026-07-21 15:17:58
-
JOB DESCRIPTION
Essential Functions
Participates in cycle counting raw materials, in-process, and finished goods as outlined by ISO 9001 SOP
Processes and maintains receiving and shipping documents in accordance with ISO 9001 SOP
Performs the complete set of functions as outlined in ISO 9001 SOP's necessary to receive and store raw materials and finished goods
Identifies, pulls, counts, stages and ships orders.
Process pick-sheets, skid labels, bills of lading documents.
Loads and unloads trucks.
Receives, identifies, generally inspects and counts material as it is received by the Company, and distributes material quickly and efficiently.
Maintains orderliness and cleanliness in receiving and storage areas.
Maintains all pertinent paperwork and distributes it to the appropriate person/departments after receiving process is complete.
Immediately cleans and reports any spills, leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and materials shortages to the Warehouse Supervisor.
Assist in hazardous waste handling when needed under the guidance from production management / supervisors or RCRA certified employees.
Minimum Requirements
High school diploma or GED in lieu of a diploma, a combination of experience and education may be considered.
One year minimum warehouse experience.
Six (6) months previous shipping/receiving or one-year prior general warehouse experience
Forklift operations experience
Preferred Requirements
Hazmat materials training
Forklift experience in sit-down, Picker, and Bendi lift equipment.
Physical Requirements
Must pass standard eye examination (corrected or uncorrected)
Bending, squatting, kneeling, lifting - frequent
Must be able to pick up 50# bags
80% - Loading/unloading utilizing forklift
20% - Scanning and Paperwork
Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $18.00/hour and $20.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2026-07-21 15:14:04
