-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2025-03-20 06:24:49
-
JOB DESCRIPTION
Job Title: Content and Community Lead
Location: Vernon Hills, IL
Department: Rust-Oleum US Marketing
Reports To: Digital & Social Media Strategist
Direct Reports/Manages others: No At the crossroads of consumer, brand, and product, we are looking for a highly motivated and passionate Social Media Marketing enthusiast to join our dynamic team.
This is an exciting opportunity to not only be the voice of our brand but also to create and curate engaging content that resonates with our community.
If you thrive in an ever-evolving digital landscape, love connecting with audiences, and have a creative spark for crafting impactful content and social media strategies, we want you! As our Social Media Community Manager, you'll play a key role in building and nurturing relationships, creating compelling content, and driving brand growth through authentic, engaging social media interactions
Key Responsibilities:
Responsible for proactive community management, monitoring and engaging with our communities and influencers across social media platforms, promoting an authentic, positive conversation Monitors and moderates inbound messages, comments, and responds to consumers with on-brand language and escalating issues internally to the appropriate team members to ensure they are acted upon and addressed in a timely manner Social media enthusiast - up to date on trending content, macro trends, consumer communities, influencers, and channel strategy Embedded member of the brand team regularly attending and actively participating in key meetings; actively executing and reporting on tactics to support brand priorities Collaborates with creative teams to create engaging social media content supporting key growth objectives for the brand Owns the copywriting and content publishing process for branded social and digital channels including but not limited to Facebook, Instagram, Youtube, TikTok, Web, and eCommerce Works with internal teams to source owned photography and videos; networks with consumers and influencers to source earned videography, photography and user generated content Schedules and publishes social posts as well as digital content and maintains an organized social/digital content calendar capturing activity across channels Assists Digital and Social Media Strategist with conducting social listening exercises, analyzing content performance and preparing reports on trends, insights and opportunities
Qualifications:
Bachelor's Degree in communications, journalism, marketing, or related field 1 -3 years of professional experience writing for social or digital channels in a content creation role (consumer goods experience preferred) Social media savvy - in-depth knowledge of social media platforms and trends Excellent writing skills Excellent research and outreach skills Self-starter with the ability to work independently Active listener, a critical thinker and a problem solver Pays extreme attention to detail Strong people skills -must possess the ability to build effective working relationships Strong communication and time-management skills Sprinklr or other social media management system experience preferred Basic analytical skills preferred Knowledge of social media best practices for brands a plus Salary Range: $60,000 - $65,000
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2025-03-20 06:24:11
-
JOB DESCRIPTION
Essential Duties and Responsibilities:
Duties Description Assisting Sales Assisting the Sales Representative with sales process from prospecting to closing; developing business in assigned markets, providing solid market presence including serving customers.
Assisting the Sales Representative in making sales.
This work may include, but is not limited to: preparing and/or distributing marketing materials; inspection and evaluation of the property; preparing roof drawings and sketches; preparing scope of work documents; preparing proposals; attending sales calls; pricing patch and repair jobs; providing technical expertise; and attending meetings with the architect, contractor and/or owner.
Inspections
This work may include, but is not limited to: identifying; analyzing; and resolving any problems; and preparing reports to owners regarding the condition of roofs.
When and where necessary or required, may perform QA/ QA+ inspections, Tremcare Gold Service (periodic visual inspection with minor repairs being addressed where detected on Tremco warranted roofs only).
Monitoring Installation Visits to project sites to monitor installation of Tremco roofing products for the purpose of determining whether to issue a Tremco warranty.
This work may include, but is not limited to: monitoring progress of the installation; identifying any aspect of installation that does not comply with specifications; reviewing and resolving concerns of architects, contractors and owners regarding Tremco's installation instructions; coordinating visits with contractors; and preparing reports on progress and problems for the Sales Representative.
Troubleshooting Identifying problems arising during installation and the lifecycle of the roof.
This work may include but is not limited to: identifying source(s) of leaks; analyzing problems to determine the best solution; monitoring implementation of the solution; and preparing written action plans.
This work will represent less than 45% of the SA's time Manual Labor Performing patch and repair work for small leaks that can be performed quickly after identifying the leak and other infrequent, limited physical labor.
Performing minor maintenance (caulking, flashing touch up, applying small amounts of mastic, removing debris, etc.) to prevent potential leaks.
Other Work This work may include but is not limited to: conducting diagnostic infra-red scans of roofs; taking photographs; preparing CADD drawings; and delivering or picking up samples, documents or small products from/to architects, owners and contractors.
Education and/or Experience:
Minimum: Associates degree or equivalent from two-year college or technical school; or combination of education and experience.
Must have a minimum of two to three years of related hands-on experience and/or training in a similar role.
Prior sales and/or customer related experience in roofing industry required.
Qualifications:
Thorough understanding and application of roofing and waterproofing contracting standards. Experience with MS Word, Excel and familiarity with CADD Excellent written and verbal communication skills. Excellent interpersonal and organizational skills. Ability to build relationships and deliver exceptional customer service. Good analytical, troubleshooting, and problem-solving skills.
Language Skills: Ability to read, analyze and interpret general business and technical information, e.g.
professional journals and periodicals, technical procedures, or governmental regulations.
Ability to draft reports, business correspondence and similar documents. Ability to effectively present information and respond to questions from customers, contractors, and architects. Ability to communicate business and technical information (e.g.
information relating to status of projects, remediation plans, and customer concerns) to Sales Representative.
Mathematical Skills: Intermediate skills: ability to calculate figures and amounts such as discounts, interest, commissions, proportions, area, circumference and volume.
Reasoning Ability: High skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
Physical Demands: Ability to climb interior/exterior ladders to access roofs and carry equipment up to approximately fifty pounds over short distances. Ability to walk along roof top edges (i.e., no fear of heights, good balance). Tolerance to exposure to outside weather conditions (heat, cold, etc.).
Apply for this ad Online! ....Read more...
Type: Permanent Location: Minneapolis, Minnesota
Posted: 2025-03-20 06:24:08
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: We are seeking a Dispenser Service Technician (DST) responsible for managing and maintaining dispenser equipment in the field.
This position will involve travel to various customer locations to provide installation, and ongoing maintenance of equipment.
The successful candidate will be detail-oriented, able to work independently, and possess a variety of technical skills in plumbing, electrical work, and fabrication.
Why join our team? Euclid Chemical offers an attractive package for full time personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time
SALARY: $68,640 - $75,500 annually plus annual company bonus program
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for all dispenser equipment in the field. Ability to visit and evaluate a plant to order the proper dispenser equipment needed to do the job right (such as conduit for electrical, hose lengths, position of dispenser, etc.) Install the dispenser equipment and help assist the customer in matching our dispenser to their plant (such as counts, added products, etc.).
When the install is complete tech is responsible to clean up any mess that was created during the visit. Will be responsible to pick up any equipment in the field that needs to be removed, and returned to a Euclid facility.
Responsible to wash out any tanks immediately upon being returned at the Euclid Chemical plant with the guidance of the plant manager on the waste product. Willingness and ability to restore any used equipment that can be reused. Will be required to do paperwork (such as DOT Certifications, Expense Reports, Daily or Weekly Reports, etc.) The DOT Certifications will be done professionally on Euclid Letterhead and handed to the customer. May be asked to transfer safe amounts of material from location to location (such as raw materials for concrete testing, admixture, fiber, etc.). Required to order equipment and install that equipment at the designated customer location and maintain that equipment after installation. Perform preventative maintenance on the equipment when needed. Assist in state inspections where necessary. Respond to customer issues with those dispensers when needed. Assure that their truck is properly equipped with the necessary parts to fix or repair the equipment.
SKILLS AND REQUIREMENTS:
Travel: Ability to travel up to 50% of the time, including overnight stays when required.
Flexibility: A flexible schedule, including early mornings, late nights, and weekends, depending on customer needs.
Work Ethic: Ability to work independently as well as part of a team.
Skills: Strong organizational, problem-solving, and time-management skills.
Basic knowledge of plumbing, electrical work, fabrication, and mathematical concepts is essential.
Physical Requirements: Ability to perform tasks in various environmental conditions and handle equipment safely.
ADDITIONAL REQUIREMENTS:
Valid driver's license and clean driving record. Willingness to complete necessary certifications and safety training as required by the company.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Sacramento, California
Posted: 2025-03-20 06:24:04
-
JOB DESCRIPTION
Position Summary:
Responsible for blending and mixing of various pigments, resins, hardeners, and other raw material additives to produce acceptable in-process batches per approved batch instruction sheets with a minimal number of corrections.
Essential Functions:
Stages and prepares all raw materials associated with production batches Maintains orderliness and cleanliness in batch making area and proper storage of batch area inventories Communicates low levels of raw materials to the Plant Supervisor Develops a thorough knowledge of raw material storage tanks, valving and piping, their contents, actuation, and directions of flow Maintains a good working relationship with Quality Control Must be capable of logical structuring of the batch making process, particularly optimization of mixer usage and efficiency Reports on all spills and leaks, equipment malfunction, safety hazards, accidents, near-miss accidents, and material shortages immediately to the production supervisor Acknowledges and understands the hazards and safety precautions required for working with inorganic metal-based powdered pigments and modifies work and hygiene practices accordingly.
Preferred Requirements:
Some college level chemistry Sector-specific batching/manufacturing experience
Minimum Requirements:
High school diploma or GED Minimum 2 years prior related experience or 1 years' experience as a production batchmaker. Ability to take initiative in completing assigned work and projects. Excellent organizational and multi-tasking abilities. Ability to be resourceful and proactive when issues arise. Strong communication skills.
Physical Requirements:
Must pass standard eye exam (corrected or uncorrected) and must pass standard color-tone testing Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency Lifting up to 50 lbs. Stooping, bending, squatting up to 50% of the time Standing and walking up to 90% of the time. This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances. Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2025-03-20 06:23:44
-
JOB DESCRIPTION
DAP is seeking a Human Resources Manager to lead the HR & Safety department and make a difference at one of DAP's largest manufacturing sites, located near Sparrows Point in Baltimore, MD.
This role is a member of the leadership team, reports to the Plant Manager and has three direct reports.
Responsibilities
Recruitment
• Screens, interviews, and onboards new hires.• Manages external recruiting agencies for temporary workers.
Employee Relations
• Engages all shifts and fosters a positive, safe, and productive work environment.• Investigates and resolves employee issues.• Plans creative celebrations and recognition programs.• Represents Company in unemployment hearings, mediations, etc.
Leadership
• Manages the goals, performance and development of the plant HR Assistant and HR Generalist.• Serve as a valued and active member of the Plant Leadership Team.
Health and Safety
• Assist the Safety Coordinator to develop and implement safety training programs to meet company, state, and federal safety requirements.
Policy Management
• Develops, interprets, and enforces plant policies and procedures.• Update policies, as needed.
Requirements
• Bachelor's degree in human resources, Communications, or related disciplines• 5+ years of relevant experience at a manufacturing facility• Ability to identify and implement innovative programs to support the plant's business objectives.• Excellent conflict-resolution, problem-solving and team-building skills• Excellent communication skills• Leadership skills• Knowledge of employment laws.• Knowledge of Payroll preferred.• High proficiency of Microsoft Office.
Benefits:
Medical, Dental and Vision Insurance Company Provided Life Insurance Paid Time Off (PTO) Company-paid short-term and long-term disability 401(k) plans Employer-funded pension plan Tuition Reimbursement
Pay Range
90,000 to 120,000 per year.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-03-20 06:23:43
-
JOB DESCRIPTION
Position Summary:
Responsible for processing outbound / inbound warehouse materials, including paperwork, scanning, skid wrapping, and forklift operation to move materials, the loading and unloading of trucks and general warehouse duties.
Essential Functions:
Participates in cycle counting raw materials, in-process, and finished goods as outlined by ISO 9001 SOP Processes and maintains receiving and shipping documents in accordance with ISO 9001 SOP Performs the complete set of functions as outlined in ISO 9001 SOP's necessary to receive and store raw materials and finished goods Identifies, pulls, counts, stages and ships orders. Process pick-sheets, skid labels, bills of lading documents. Loads and unloads trucks. Receives, identifies, generally inspects and counts material as it is received by the Company, and distributes material quickly and efficiently. Maintains orderliness and cleanliness in receiving and storage areas. Maintains all pertinent paperwork and distributes it to the appropriate person/departments after receiving process is complete. Immediately cleans and reports any spills, leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and materials shortages to the Warehouse Supervisor. Assist in hazardous waste handling when needed under the guidance from production management / supervisors or RCRA certified employees.
Minimum Requirements:
High School Diploma or GED One year minimum warehouse experience. Six (6) months previous shipping/receiving or one-year prior general warehouse experience Forklift operations experience
Preferred Requirements:
Hazmat materials training Forklift experience in sit-down, Picker, and Bendi lift equipment.
Physical Requirements:
Must pass standard eye examination (corrected or uncorrected) Bending, squatting, kneeling, lifting - frequent Must be able to pick up 50# bags 80% - Loading/unloading utilizing forklift 20% - Scanning and Paperwork Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency. This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances. Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2025-03-20 06:23:32
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Field Operations Manager (FOM) will report directly to the Regional Business Manager (RBM).
In this role, the FOM will oversee $30 Million+ in annual self-performed revenue.
The FOM will also review and approve proposals, expense reports, specifications (SOW), PTO requests, etc., for all WTI field operations personnel within the specified region.
The FOM will be responsible for the safety, quality, and overall productivity and profitability of self-performing teams.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
All Field Supervisors, General Field Superintendents, and Project Managers will report directly to the FOM.
Through leadership and actions, contribute to the development of a Safety-Oriented Culture that will result in 100% compliance with Toolbox Talk attendance, DTA reporting, and truck audits; and have work habits that will lead to ZERO safety-related incidents on ALL projects within the region.
Provide training, supervision, direction, and support for all Supervisors, General Field Superintendents, and Project Managers within the regions in areas as follows: Estimating Pre-job planning Project Management to expedite projects safely, under budget, and with the highest attainable quality and customer satisfaction.
Leadership and coaching of their respective Foremen/teams.
Coordination and collaboration with Construction Managers and GC Superintendents on GC-related work.
Sales communication and coordination. Workforce planning, recruiting and retention strategy to maintain optimum performance of the region. Approve proposals for PR, CONPR, and Safety Solutions related work up to $50K.
Travel within the Region as needed to attend customer, sales, or business meetings.
Communicate on a regular basis with RBM regarding: Safety compliance results Project approvals, progress, and results Personnel updates Forecast, analyze, and report on sales and establish financial performance metrics.
Establish criteria for success and provide leadership for the regional team's goal achievement. Provide training and QA/QC inspections at all levels at all levels of work to ensure the highest standards or Tremco/WTI roofing/facade practices to include: Field Applications - existing and new materials, systems, application parameters, etc. Customer Service Reporting compliance
EXPERIENCE REQUIRED:
10+ years prior experience in a results-oriented leadership role for a regional, cross-functional team within the building construction industry. Experience taking on strategic initiatives where previous experience may not have been present and engaging to grow the initiative within the business. Prior experience leading a large staff in remote multi-state locations. Experience in an influential role where extraordinary results were achieved through accountability and leading others to achieve and maintain a high standard of performance. Prior experience clearly defining expectations, articulating ideas, thoughts, and views, and providing continual, timely, frank, and direct feedback to others. Proven experience with setting strategy and establishing plans for business growth. Prior experience working between multiple departments that support regional compliance and profitability. Must have prior hands-on experience with handling business transactions, procedures, and practices, including but not limited to pricing, company vehicles, safety, order entry, estimating, general contracting procedures, designation, and duties of employees, warranties, quality assurance practices, service offerings, etc.
OTHER SKILLS AND ABILITIES:
Can service customers in a compliant and financially solvent manner Intermediate skills with financial data and mathematics (understanding of statistics, business metrics, gross margin, operating income, cost management, etc.) Excellent written and verbal communication skills, including the ability to make professional presentations to others Must have excellent organizational skills to multitask in a fast-paced environment Strong problem-resolution skills with the ability to effectively communicate with all personality types Strong computer skills, including Outlook, Word, Excel, PowerPoint, Adobe, etc.
Must be able to use technology to perform company tasks (expense management, timekeeping systems, intranet, etc.) The salary range for applicants in this position generally ranges between $88,000 and $110,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Orlando, Florida
Posted: 2025-03-20 06:23:26
-
JOB DESCRIPTION
DAP is seeking a Human Resources Manager to lead the HR & Safety department and make a difference at one of DAP's largest manufacturing sites, located in Dallas Texas This role is a member of the leadership team, reports to the Director of Human Resources for Operations and has two direct reports.
The position supports the DAP Dallas Plant and oversees HR duties for the Garland Distribution Center
Responsibilities
Recruitment
• Screens, interviews, and onboards new hires.• Manages external recruiting agencies for temporary workers.
Employee Relations
• Engages all shifts and fosters a positive, safe, and productive work environment.• Investigates and resolves employee issues.• Plans creative celebrations and recognition programs.• Represents Company in unemployment hearings, mediations, etc.
Leadership
• Manages the goals, performance and development of the plant HR Assistant and HR Generalist.• Serve as a valued and active member of the Plant Leadership Team and works closely with the Operations team to provide leadership and support.
Health and Safety
• Assist the Safety Coordinator to develop and implement safety training programs to meet company, state, and federal safety requirements for the Plant and Distribution Center.
Policy Management
• Develops, interprets, and enforces plant policies and procedures.• Update policies, as needed.
Requirements
• Bachelor's degree in human resources, Communications, or related disciplines• 5+ years of relevant experience at a manufacturing facility• Ability to identify and implement innovative programs to support the plant's business objectives.• Excellent conflict-resolution, problem-solving and team-building skills• Excellent communication skills• Leadership skills• Knowledge of employment laws.• Knowledge of Payroll preferred.• High proficiency of Microsoft Office.• Must be bilingual in Spanish.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture, and benefits at www.dap.com/careers/.
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Dallas, Texas
Posted: 2025-03-20 06:23:20
-
JOB DESCRIPTION
Title: Chemist II
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
Apply and interpret standard scientific or engineering theories, concepts and techniques in a scientific or engineering specialty requiring a working knowledge of related disciplines.
Work on a wide range of problems where causal relationships are progressively difficult to establish and the use of creative thinking is required.
Extends the responsibilities of Development Chemist.
Report to Lab Manager, or more senior R&D personnel.
Essential Functions:
Prepare project requests or research proposals on assigned projects.
Create ideas for new products or approaches and conduct individual investigations.
Apply creative approach to problem solving and formulation. Test various technologies for use in coatings.
Analyze results, report findings, and provide guidance on viability.
Execute laboratory projects independently or as part of a team and continuously assess effectiveness.
Develop research findings, draw conclusions, and make recommendations.
Prepare and present written or oral reports. Contribute to research programs of others through communications and participation in technical work groups and design teams. Responsible for meeting project goals within time, quality and budget constraints.
Utilize initiative to keep projects on track. Coordinate work of others, anticipate, and resolve priority conflicts. Supervise efforts of technicians. Acquire and maintain technical expertise in the coatings industry and its technologies. Understand and follow safety, technical, and quality procedures using Carboline or industry standards.
Train others as required.
Ensure subordinates are trained and utilize appropriate procedures. Communicate and verify technical information directly to various departments, suppliers, customers, and other RPM companies. Work with hazardous materials.
Capable of understanding and using appropriate information and personal protective equipment.
Train subordinates or others and ensure their compliance. Maintain clean, safe working areas.
Assess working condition of equipment. Alerts others to deviation, hazards or quality issues. Take an active role in hazard recognition and injury prevention by following all safety rules & regulations and immediately report all injuries and incidents to your supervisor. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Receives annual training in RCRA Hazardous Waste and Carboline's Contingency Plan and will adhere to this training while performing their job. Perform additional duties as assigned Commit to the Company's safety and quality programs
Requirements:
4-year Chemistry or related science degree 3+ years chemistry experience, or more advanced chemistry or related science degree with no required experience.
Physical Requirements:
Lifting up to 50 pounds; exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
Personal protective equipment would be utilized.
Must pass annual respirator medical evaluation and pulmonary function test as required by OSHA.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2025-03-20 06:23:16
-
JOB DESCRIPTION
Title: Administrative Assistant- Color
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for nine years, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
This position will communicate directly with sales reps, customers, distributors, customer service and RTS warehouses concerning all color questions and orders.
Essential Functions:
Receive color related orders, and maintain work schedule. Make a folder with all relevant color matching information for the color technician. Use the color computer to measure colors and search out the closest color. Assign new color numbers, and keep color cross reference up to date. Make working color standards for new orders and make final master color standards for production. Make color chips for marketing requests.
Maintain marketing color chip file. Prepare and maintain charts, such as Federal Colors, base densities and other cross references. Must be friendly, organized, detail oriented, flexible and dependable. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Take an active role in hazard recognition and injury prevention by following all safety rules & regulations and immediately report all injuries and incidents to your supervisor. Commit to the Company's safety and quality programs. Perform additional duties as assigned.
Requirements:
Bachelor's in Business or a Technical degree or equivalent experience, preferred High School Diploma or equivalent, required Microsoft Office experience
Physical Requirements:
This position requires minimal physical activity but does require computer usage for an extended period of time - up to 8 hours in a day.
No unusual environmental, lifting or exertion requirements are associated with this position.
Must be able to pass a color blindness and math test.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2025-03-20 06:23:07
-
JOB DESCRIPTION
DAP is seeking a dynamic and experienced Public Relations Manager to join our team.
The successful candidate will be responsible for developing and executing strategic PR initiatives that enhance DAP's brand reputation and product visibility.
This role involves managing media relations, creating compelling content, and analyzing media coverage to optimize our communication strategies.
Responsibilities:
Develop and implement effective PR strategies aligned with DAP's business goals. Create and execute communication plans for product launches and internal communications. Manage media inquiries, schedule interviews, and maintain strong relationships with media personnel. Craft press releases, listicles, how-to articles, and other relevant content for media distribution. Analyze media coverage and monitor industry trends to inform strategic decision-making. Plan and coordinate media events to enhance brand presence. Collaborate with marketing teams to develop integrated marketing communication plans.
Skills and qualifications
Strong writing and editing skills; experience with social media platforms. Bachelor's degree in media and communications, English, Journalism, Marketing, or a related field. 3 to 5 years' experience in public relations, with a track record of successful PR campaigns. Proficient in Microsoft Office and relative project management software. Excellent oral and written communication skills. Superior customer relationship management skills. Strong project management skills with excellent attention to detail. Experience with the construction industry and B2C consumer products, a plus
Leadership Traits
Technical Understanding & Business Acumen: Knows the business and the mission-critical technical and functional skills to perform the job at a high level.
Understands various types of business propositions and how the business operates.
Learn new methods and technologies easily.
Learning Agility: Learns quickly when facing new problems.
Is a relentless and versatile learner and is open to change.
Enjoys the challenge of unfamiliar tasks and can quickly discern the underlying structure of anything.
Strategic Agility: See ahead clearly and can anticipate future consequences and trends.
Is future oriented and offers broad knowledge and perspective.
Can scenario plan possibilities and outcomes.
Leadership: Provides the essential critical thinking to determine the necessary approaches to get things done.
Offers good judgement about which creative ideas and suggestions will work; can facilitate effective brainstorming, can project how potential ideas could play out in the marketplace.
Create New & Different: Ability to recognize the next great breakthrough.
Is creative, a visionary, and can create and bring exciting ideas to market. Action Oriented: Enjoys working hard and is full of energy, steadfastly pushing self and other for results.
Can be counted on to exceed goals successfully and is consistently a top performer.
Effective project management skills Excellent communication skills to all levels of the organization.
Strong interpersonal, verbal and written communication skills.
Is clear, concise and persuasive.
Experience creating and presenting business proposals, handling objections and overcoming obstacles Strong attention to detail; strong multi-tasking ability as well as ability to manage deadlines in a dynamic, fast-paced work environment. Self-motivated and proactive individual who strives for excellence and continuous improvement. Cross functional leadership and teamwork.
Self-confident, verbalizes problem solving skills, demonstrates initiative, manages and motivates team.
Integrity and Trust: Is widely trusted, is seen as direct, truthful and can make a case in an appropriate and helpful manner.
Must have a can-do attitude and the desire to go above and beyond in all you do!
Benefits:
Medical, Dental and Vision Insurance Company Provided Life Insurance Paid Time Off (PTO) Company-paid short-term and long-term disability 401(k) plans Employer-funded pension plan Tuition Reimbursement
Pay Range
85,000 to 100,000 per year.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-03-20 06:23:03
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: We are seeking a Dispenser Service Technician (DST) responsible for managing and maintaining dispenser equipment in the field.
This position will involve travel to various customer locations to provide installation, and ongoing maintenance of equipment.
The successful candidate will be detail-oriented, able to work independently, and possess a variety of technical skills in plumbing, electrical work, and fabrication.
Why join our team? Euclid Chemical offers an attractive package for full time personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time
SALARY: $68,640 - $75,500 annually plus annual company bonus program
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for all dispenser equipment in the field. Ability to visit and evaluate a plant to order the proper dispenser equipment needed to do the job right (such as conduit for electrical, hose lengths, position of dispenser, etc.) Install the dispenser equipment and help assist the customer in matching our dispenser to their plant (such as counts, added products, etc.).
When the install is complete tech is responsible to clean up any mess that was created during the visit. Will be responsible to pick up any equipment in the field that needs to be removed, and returned to a Euclid facility.
Responsible to wash out any tanks immediately upon being returned at the Euclid Chemical plant with the guidance of the plant manager on the waste product. Willingness and ability to restore any used equipment that can be reused. Will be required to do paperwork (such as DOT Certifications, Expense Reports, Daily or Weekly Reports, etc.) The DOT Certifications will be done professionally on Euclid Letterhead and handed to the customer. May be asked to transfer safe amounts of material from location to location (such as raw materials for concrete testing, admixture, fiber, etc.). Required to order equipment and install that equipment at the designated customer location and maintain that equipment after installation. Perform preventative maintenance on the equipment when needed. Assist in state inspections where necessary. Respond to customer issues with those dispensers when needed. Assure that their truck is properly equipped with the necessary parts to fix or repair the equipment.
SKILLS AND REQUIREMENTS:
Travel: Ability to travel up to 50% of the time, including overnight stays when required.
Flexibility: A flexible schedule, including early mornings, late nights, and weekends, depending on customer needs.
Work Ethic: Ability to work independently as well as part of a team.
Skills: Strong organizational, problem-solving, and time-management skills.
Basic knowledge of plumbing, electrical work, fabrication, and mathematical concepts is essential.
Physical Requirements: Ability to perform tasks in various environmental conditions and handle equipment safely.
ADDITIONAL REQUIREMENTS:
Valid driver's license and clean driving record. Willingness to complete necessary certifications and safety training as required by the company.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Sacramento, California
Posted: 2025-03-20 06:23:01
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration. Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Job Description:
Legend Brands has an immediate opening for Machine Builder.
This is a full-time position on the day shift, 5:00 am - 3:30 pm Monday - Thursday.
Some overtime may be required.
Use and understanding of torque methods to ensure the proper alignment of parts.
Job Requirements:
Methodically construct industrial engine components (engine, blower, water box, water pump and control panel) into an array of different finished products Responsible for diagnosing and resolving engine and associated assembly tolerance issues to ensure proper fit and alignment Use and understanding of torque methods to ensure the proper alignment of parts.
Qualifications:
Mechanical aptitude Manual dexterity, and experience with power and hand-tools Automotive or heavy equipment repair and service experience preferred, even as a hobby Ability to communicate information clearly Attention to detail and quality Ability to read and understand blueprints or schematics a plus Ability to see all colors accurately is an essential function of this job
Hiring Range:
Between $18.00 - $18.00/hour
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays per year, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through May 1, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2025-03-20 06:21:47
-
JOB DESCRIPTION
Job Title - Material Technician (Warehouse)
Job Purpose
The Material Technician is responsible for processing inbound returns from the field of warehouse materials, including cutting back products, paperwork, scanning, skid wrapping, and forklift operation to move materials.
You will also be responsible for processing outbound / inbound warehouse materials, including paperwork, scanning, skid wrapping, and forklift operations to move materials, the loading and unloading of trucks and general warehouse duties.
Principal Accountabilities
Identifies, pulls, counts, stages and ships orders. Process pick-sheets, skid labels, bills of lading documents. Loads and unloads trucks. Receives, identifies, generally inspects and counts material as it is received by the Company, and distributes material quickly and efficiently. Process returns from sales field installations. Cut back materials for re-work or waste stream. Move materials via forklift to designated warehouse areas. Maintains orderliness and cleanliness in receiving and storage areas. Maintains all pertinent paperwork and distributes it to the appropriate person/departments after the receiving process is complete. Immediately cleans and reports any spills, leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and materials shortages to the Warehouse Supervisor. Assist in hazardous waste handling when needed under the guidance from production management / supervisors or RCRA certified employees.
Immediately cleans and reports any spills, leaks, equipment malfunctions, safety hazards, accidents, near-miss accidents and materials shortages to floor supervisor/management. Assists in hazardous waste handling when needed under the guidance of floor management / supervisors or RCRA certified employees.
Additional tasks may be performed as required, and do not significantly alter this description.
Experience |Education | Certifications
High School Diploma or GED Valid Driver's License One year minimum warehouse experience. Forklift operations experience
Physical Requirements
Must pass standard eye examination (corrected or uncorrected) Bending, squatting, kneeling, lifting - frequent Must be able to pick up 50# bags 80% - Loading/unloading utilizing forklift 20% - Scanning and Paperwork Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency. This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The salary range for applicants in this position generally ranges between $18.00-$20.00 p/h.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law. In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
ABOUT US
YOUR CAREER.
OUR ORGANIZATION.
THINK WE'RE A FIT? Be a part of Stonhard and be a part of something big.
We are a world-leading manufacturer and installer of seamless floors, walls and lining systems and we offer diverse and challenging careers throughout the world.
We are also part of RPM Performance Coatings, an organization that generates more than $1.6 billion in annual revenue, employs over 4,600 people and maintains sales operations in more than 65 countries.
We are growing and we love what we do.
Does this sound like your kind of place?
BENEFITS
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent insurance and financial benefits program.
Stonhard, being part of RPM Performance Coatings, is able to combine its resources to offer a substantial and comprehensive benefits package.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2025-03-20 06:21:16
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
This is a remote position - - typical travel schedule is 2 weeks per month.
Responsible for the NY and New England markets.
Job Description:
Drive all phases of the MRO sales process for assigned account(s) and with a strong focus on end users of the Legend Brands products, including Dri-Eaz and other industry leading brands.
Responsible for field sales contributing to business building via end user engagement including contact generation, needs identification, sales calls/presentations, as overall account management.
Will also be required to work with distribution partners in the field, as well as handling inquiries regarding orders, shipments, and products. Responsible for executing business strategies that will continue to expand our end user client base and increase the company's market share.
Also, create and implement objectives that will delight our customers and end users to ensure a sustained partnership is built.
Job Requirements:
Excellent communication skills with particular emphasis on listening to end user and customer needs. Ability to gather and assess information/data to build the best solution for end users and customers. Excellent interpersonal and presentation skills Proven ability to meet or exceed sales goals Persuasive, yet unobtrusive manner. Must be willing and comfortable with hybrid working - traveling/meeting end users on site, face to face and ability to use remote application such as video conferencing, as needed. High-level skills with MS Office (especially PowerPoint and Excel) and CRM systems (i.e.
HubSpot, Salesforce.com etc.). Preference given to candidates who have experience selling to end users and partnering with regional and national distributors (i.e.
Grainger, HD Supply)
Qualifications:
Bachelor's Degree and 5+ years in Sales meeting with and presenting to end users directly while working with regional or national distributors. Travel requirement of 30-45% Prior MRO, Facilities channel experience a plus, but not required
Hiring Range:
Between $81,000 - $95,000/annually - position is commission eligible
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through May 1, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Hartford, Connecticut
Posted: 2025-03-20 06:21:15
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-03-20 06:21:01
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
The Program Manger manages new product development programs including strategic market initiatives involving internal and external development partners.
Supervision Responsibility
None
Essential Duties To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Set product development timelines, program deliverables and prioritize development team activities to maintain the schedule. Ensure work is accurate, on time while meeting company goals. Conduct regular cost analysis review while product is being developed to maintain program goals. Work with Product Management, Sales and Marketing to create the products position in the marketplace. Identify program risks and recommend mitigation plans with lowest possible risk and financial exposure. Create and circulate weekly status reports to management team. Manage the entire product portfolio, time-integrated plans for product introduction and product life cycles from strategic planning to tactical activities. Manage the Product Development process through the various stage gates and receive approvals from key stakeholders. Key contributor to multidisciplinary teams as it relates to new product development. Key leader for managing product development programs within the program management software and defining key pillars for the Product Development team. Manage and develop strategic partnerships with the highest degree of teamwork. Maintain current, annual, and new product forecast. Lead program planning efforts to maintain production schedules. Manage transition planning with Operations, Supply Chain, Sales, and Marketing. Develop and manage strategic plans, operational plans and activities, product and applications planning for the new products. Develop and track annual product growth plans. Facilitate introduction of product into new markets. Coordinate with all groups/departments to ensure that the needs of the marketplace, distribution channel, and Legend Brands associates are met.
Minimum Qualifications and Education Requirements:
In order to perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Bachelor's Degree required and 1-3 years of program management experience. Program Management Skills. Multi-task with a high sense of urgency. Excellent customer service. Understanding of business/profit models. Strong attention to detail. Strong organization skills.
Hiring Range:
Between $78,250 - $90,000/Annually
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting application through May 1, 2025.
Applications will be reviewed as received and ongoing interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-03-20 06:21:00
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Director of Procurement is responsible for developing and executing purchasing strategies, leading the team in managing vendor relationships, negotiating contracts, and ensuring the company acquires necessary goods and services at the best possible price by analyzing market trends, mitigating risks, and collaborating with stakeholders, requiring strong leadership, negotiation, and analytical skills.
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Management
Assist in targeting and establishing departmental goals, utilizing a philosophy of a continuous improvement Identify, and where appropriate, develop alternative sourcing strategies including off-shore and on-shore sources of supply. Lead cost reduction and transition activities. Develop and maintain strategic relationships with key suppliers, maintaining high levels of personal contact with these organizations. Assist in the development and implementation of policy and procedures for the department . Assist in the selection and training of departmental staff, including regular performance reviews. Plan and assist in the departmental budgeting process including operational expenses, headcount, and capital expenses. Build a collaborative culture within the company and Purchasing Department. Strategic planning and execution of procuring materials and all other related components for Legend Brands' companies. Supervise purchasing staff. Performs other related duties as assigned.
Purchasing
When needed, negotiate and monitor formal supplier agreements and other purchase and supply contracts. Leverage corporate wide spending to support "lowest cost of ownership and highest value" by reviewing and analyzing company procurement practices, developing suppliers, and working collaboratively with other departments in the company. Train and coach purchasing department in new systems, practices, and approaches to procurement. Work in cooperation with the Engineering, Product Development, Manufacturing and QA Departments to develop a robust supply chain for new and existing products. Conduct formal requests for quote, tabulate, review and compare bids with specifications to verify conformance; consider the quality of items, services and abilities of the supplier in terms of company needs. Evaluate, monitor, select and revise the supplier base based on price, quality, service/support, warranty, and reliability. Develop monthly reports and measures on purchasing activities.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered. Education and Experience
Bachelor's Degree required. Bachelor's Degree in Supply Chain Management, Business Management, Engineering or related field preferred. 10 years of procurement, supply chain or related experience required. Previous experience in overseas procurement supply chain management preferred.
Prior experience with vendor negotiation and managing complex supplier relationships in a regulated environment, strongly preferred.
Knowledge of contract management and legal compliance (e.g pricing agreements, terms of service), preferred. Experience with ERP systems required. Certifications
Certified Professional in Supply Management (CPSM) preferred.
Hiring Range
Between $110K - $125K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through April 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary.
ABOUT US
Legend Brands group is the leading provider of equipment, chemicals and expert training for professional cleaning, facility maintenance, portable environmental control, smoke and fire remediation and water damage restoration.Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-03-20 06:20:58
-
JOB DESCRIPTION
Essential Functions & Responsibilities
Executes tasks of quality control testing, including analyzing, recording and reporting accurate results in a timely fashion. Communicates results with the Process Chemist and if directed, Plant Operators/Supervisor.
Participates in R&D & technical services projects to include gathering necessary raw materials / intermediates.
Assists when requested in testing of materials being worked on related to R&D or Process Improvement • Collects and prepares high quality, accurate samples for customers and prepares for shipment. Maintains clean and organized lab work area. As directed, manages lab chemical inventory and stock /storage room re-organization.
Participates in all environmental and safety training as required by Federal, State, County, and Local regulations as well as company policies.
Suggests improvements for safety and compliance.
Promptly reports any safety incidents and participates in incident investigations as requested. Additional duties may be added or removed as management requires.
Placement Criteria:
Minimum education and practical work experience: bachelor's degree in chemistry, biology or related field and 1-5 years' experience working in an analytical lab or similar position, or a suitable combination of education and relevant experience. Specialized technical/aptitude experience: minimum of 1-5 years' experience and demonstrated knowledge and proficiency with gravimetric and analytic techniques. Extensive knowledge of commonly-used concepts, practices, and procedures within the chemical manufacturing industry; previous work and/or substantial knowledge of, including commonlyused concepts, practices, and procedures, within in the thermoset polymer industry is a strongly considered asset.
Demonstrated ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively and problem solve without supervision and within established time limits and ongoing deadlines. Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally. Relevant computer skills for this position include knowledge and experience with Microsoft Office applications and instrumental software.
Experience with SAGE Platinum for Windows is preferred. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management. Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-03-20 06:20:42
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Support lead management campaigns to assist our sales team and help identify potential customers.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Identifying potential leads through online research, business directories, industry reports, and social media platforms (LinkedIn, for example). Gathering information on companies or individuals that fit the organization's target market. Assisting with campaign management from intake to metrics upon close. Entering and maintaining lead information in a customer relationship management (CRM) system. Reviewing gathered information and ensuring data is clean and organized. Keeping track of lead status, communications, and sales pipeline progress. Assisting in creating or curating marketing materials such as email templates, brochures, or presentations for outreach. Sharing relevant content (e.g., case studies, blog posts, or white papers) to nurture leads. Analyzing competitor activities or market trends to identify new potential leads or gaps in the market. Providing insights or feedback to the sales and marketing teams based on findings. Engaging with leads through regular follow-ups via email, phone calls, or social media to build relationships. Working closely with sales representatives and marketing teams to refine lead generation strategies. Participating in team meetings to discuss lead quality and conversion rates. Tracking lead generation metrics such as response rates, conversion rates, and outreach success. Preparing reports or summaries for managers and other team members to assess the effectiveness of lead generation efforts. Engaging on professional social platforms like LinkedIn to connect with prospects and gather more qualified leads. Managing company pages or assisting in paid social campaigns targeting potential clients.
EDUCATION REQUIREMENT:
College or university student with completed coursework in business or marketing would be a plus.
EXPERIENCE REQUIREMENT:
Experience working as a member of a team in a fast-paced environment with shifting priorities. Project management experience is a plus.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proven ability working with Excel, Smartsheet, Monday.com, and CRM platforms like Salesforce. Dependable and reliable. Attention to detail with strong organizational and time management skills.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 10 lbs.
BENEFITS AND COMPENSATION:
This internship will run for approximately 8-10 weeks during the summer, beginning in June and concluding in August.
The hourly rate for applicants in this position generally ranges between $17 and $21.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-03-20 06:20:42
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Quality Technician I is responsible for inspection of purchased and manufactured hardware, maintenance of equipment calibration system, generation of Quality metrics and management of discrepant materials dispositioned through the Material Review Board.
Supervision Responsibility:
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Performs first article and other inspections of Legend Brands manufactured products, as well as components purchased from its suppliers. Initial point-of-contact for Operations for part and materials quality issues that impact manufacturing; assists in defining problems and helping to develop solutions.
Performs receiving inspection (when required) of incoming hardware on a random basis using AQL sampling plans. Performs random inspection of finished goods for compliance to specification, reports findings to Quality and Manufacturing managers. Assists in performing manufacturing process audits and report findings to the Quality Assurance and Manufacturing managers. Helps conduct trend analysis and other studies as appropriate to assist Quality Engineering in evaluating potential corrective action of quality issues. Facilitates the Legend Brands equipment calibration system including identification and tracking of all calibrated equipment, maintenance of the calibration data base, and coordination with the company's calibration services provider. Works with other Quality personnel to produce periodic reports on first pass yield/cost of quality, inspection results, MRB dispositions and other quality metrics as appropriate. Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
High School Diploma or GED required. Previous experience in a manufacturing environment preferred.
Hiring Range:
Between $20/hr.
- $23/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through April 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-03-20 06:20:26
-
JOB DESCRIPTION
DAP is looking to hire social media intern for Summer 2025.
Responsibilities
Social Media Content Planning
Description: Draft and schedule weekly social media content in social media management platform, including written copy and corresponding media file.
Content planning will require research to align with seasonal and industry trends.
Maintain content archive on a monthly basis.
Goal: Create and schedule approved content for each content pillar from September 1, 2025 - May 31, 2026 (9 months), with one piece of content scheduled for each pillar per week.
Earned Content Management
Description: Work with the Social Media Coordinator to track all content earned through UGC and IGC before FY25.
Goal: Identify gaps in earned content use and create a content calendar for Instagram and Tik Tok by August 2025
Short Form Video Creation
Description: Use identified product and topic priority list to storyboard, film, and edit short-form video content for social media scheduling.
Goal: Create and schedule 15 pieces of approved content by August 2025.
Keyword Identification for Social Media Use
Description: Work with the brand team to identify a list of key words for each product category that can be leveraged in content creation.
Goal: Incorporate keywords into AI platform to ensure use in social media copy by August 2025.
Requirements
Major: Marketing, Communications, Business, or a related field. Rising Junior or Senior (completed Sophomore year) Extensive experience with Instagram and Tik Tok, Facebook and Youtube a plus Preferred: experience with content creation and editing (short-form vertical video) Preferred: experience managing accounts for a business or campus organization. Impeccable written and oral communication skills. History of effective social media writing. Excellent written and verbal communication skills. An eye for video and content creation opportunities. Extremely detail oriented. Organized and able to manage multiple projects simultaneously. Ability to work independently as well as in a team. Self-motivated and quick learner
Pay
$17 / hour
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-03-20 06:20:25
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Vice President of Product Development is responsible for leading a team of designers and engineers and overseeing the entire product development lifecycle from ideation to launch.
Working closely with cross functional teams ensuring successful delivery of innovative products that meet customer needs and align with the company's goals.
Supervision Responsibility:
Mobile App Developer, Mechanical Engineer, Mfg.
Component Designer/Fabricator, Industrial Design Supervisor, Project Engineer, and Sr.
Mechanical Engineer.
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Develop and deliver innovative products that meet customers' needs, market demand and align with companies' business goals. Effectively lead, mentor, and coach a team of product development professionals, providing guidance, support, and development opportunities to ensure team success. Collaborate with cross-functional teams including quality, sales, marketing, product management and operations, to ensure alignment with overall business objectives. Own and maintain the Product Development Process ensuring thorough yet quick product development launches while following the process including stage gate approvals. Manage outside resources in the development process to maximize speed to market and leverage expertise in areas lacking in the department. Manage Product Development budget effectively, allocating resources to maximize ROI and achieve business objectives. Manage the cost development process early in the development process to track and address any deviations from the initial cost targets.
Utilize D365 to develop costed BOMs that are accurate and up to date. Report on and achieve Metrics for the Product Development department. Lead the PDC team meetings providing timely and accurate updates on a regular schedule including cost updates, Gantt charts and stage gate steps. Identify potential product development risks and create a strategy to mitigate them while maintaining project timelines and quality. Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's degree in engineering required. Five years of directly applicable experience required.
Certifications/Licenses
Valid driver's license required.
Hiring Range
Between $131K - $150K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through April 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-03-20 06:20:12
-
JOB DESCRIPTION
$20.00-$33.00/hour (sin incluir el salario prevaleciente)
Buscamos techadores comerciales con experiencia para unirse a nuestro equipo.
Los techadores comerciales capacitados serán responsables del mantenimiento, reparación e instalación de sistemas de techos comerciales.
BENEFICIOS:
401K Seguro de salud Tiempo libre remunerado Reembolso de kilometraje Educación continua
DEBERES Y RESPONSABILIDADES DEL PUESTO:
Instalación de diferentes tipos de sistemas de techado como BUR, EPDM, revestimientos de una sola capa y otras formas de sistemas de techado de baja pendiente. Manejo seguro de herramientas profesionales (herramientas manuales, herramientas eléctricas, etc.) Siga las regulaciones de OSHA y otras agencias reguladoras relacionadas con la seguridad en el lugar de trabajo y demuestra prácticas laborales seguras. Trabaje al aire libre en una amplia variedad de condiciones climáticas y para satisfacer las demandas físicas del puesto, incluida la movilidad necesaria para completar las tareas. Subir y operar en escaleras, capaz de soportar al menos 50 libras. Comunicación efectiva con capataces, supervisores y otros empleados de WTI y Tremco.
REQUISITOS DE TRABAJO:
Techos comerciales: todos los niveles; al menos 1 año preferido Forma de transporte confiable Verificación de antecedentes aceptable según los estándares de la empresa. Capacidad para pasar una prueba de detección de drogas y un examen físico previos al empleo.
SALARIO: $20.00-$33.00/hora El sueldo por hora para los solicitantes en este puesto generalmente oscila entre $20.00 y $33.
00 Este rango es una estimación, basada en las calificaciones, operaciones, necesidades y otras consideraciones permitidas por la ley de los empleados potenciales. Los solicitantes calificados recibirán consideración para el empleo sin importar su raza, color, religión, origen nacional, sexo, orientación sexual, identidad de género, condición de veterano protegido o discapacidad.
SOBRE NOSOTROS:
Tremco Construction Products Group (CPG) reúne las divisiones operativas de Selladores comerciales e impermeabilización y Mantenimiento de techos y edificios de Tremco Incorporated; Sistemas Dryvit, Inc.; Nudura Inc.; Sello de voluntad; Weatherproofing Technologies, Inc.
y Weatherproofing Technologies Canada, Inc. Las estructuras con sistemas Tremco CPG son más fáciles de construir y mantener, prácticamente impermeables a los elementos y pueden brindar cualquier apariencia deseada.
Las soluciones de seis lados de las empresas CPG de Tremco ofrecen un rendimiento demostrable al menor costo de ciclo de vida posible y detienen las fugas antes de que ocurran mediante programas de mantenimiento continuos.
Los propietarios de edificios obtienen la tranquilidad que ofrecen las garantías de sistemas líderes en la industria, todo desde una única plataforma.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Ohio
Posted: 2025-03-20 06:20:10
