-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-04-20 22:11:44
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-04-20 14:09:49
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura, and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Supervisor has the direct responsibility for leadership of the maintenance department, as well as maintaining and upgrading the site facilities and production equipment.
In addition, this position is responsible for the management of the Preventive Maintenance Program.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate and direct maintenance projects, making detailed plans to accomplish goals and direct the integration and implementation of technical activities.
Support the HS&E, Quality and Service, and Productivity/Cost sections of the facility plan as defined by scorecard activities.
Plan and direct the installation, testing, operation, maintenance, and repair of facilities and equipment.
Manage the Preventive Maintenance Program to ensure it reduces downtime and improves the overall reliability of production and production-supporting machinery.
Support capital project requirements for review and submission to management, including costs, schedule, and procedures.
Direct, review, and approve product design and changes consistent with Management of Change (MOC) procedures.
Analyze annual utility expenditures and develop a plan to optimize efficiency and reduce costs.
Perform administrative functions such as reviewing and writing reports, approving expenditures, and making decisions about the purchase of materials or services.
Investigate equipment failures and difficulties to diagnose faulty operation and work with the maintenance crew to implement the needed preventative measures.
Recommend design modifications to eliminate machine or system malfunctions.
Demonstrate a commitment to diversity in hiring and promotion decisions.
Effectively and efficiently onboard new employees.
Conduct annual performance evaluations and provide ongoing performance feedback, maintaining clear and timely documentation.
Coach and manage employees using CS&W philosophy and tools to ensure talent is developed and retained.
Apply Tremco policies and adhere to processes to ensure compliance and organizational best practices.
EDUCATION REQUIREMENT:
High school diploma or general education degree (GED).
EXPERIENCE REQUIREMENT:
A minimum of 5 years of maintenance experience in a manufacturing environment.
Familiarity with plant safety practices, chemical processes, equipment maintenance, statistical applications, and equipment operations is also required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Knowledge of the practical application of sound engineering and chemical plant practices.
This includes applying engineering principles and techniques to process design for the production of products and intermediates.
Knowledge of arithmetic, statistical methods, "Lean" concepts, ISO procedures, and their applications.
Ability to apply Excel, Word, and SAP applications to daily job responsibilities with an emphasis on system-driven solutions.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-04-19 22:10:57
-
JOB DESCRIPTION
The primary result expected from the R&D Technical Director will be to oversee an entire R&D group and manage discovery, innovation, scale up, and commercialization of existing and new cost effective quality technology by planning, directing, coordinating, and/or budgeting activities concerned with the design and completion of research and development projects, managing staff activities and results to quickly respond to market opportunities, and defending the corporation against competitive threats.
Plan laboratory experiments to confirm feasibility of processes and techniques used in the production of materials having unique characteristics.
Confer with customers to determine how to tailor materials to their needs.
Conduct research on the structures and properties of materials, such as adhesives, coatings, and polymers, to obtain information that could be used to develop new products or enhance existing ones.
Prepare reports of materials study findings for the use of other research & development associates and requestors.
Devise testing methods to evaluate the effects of various conditions on particular coatings.
Determine ways to strengthen or combine materials or develop new materials with new or specific properties for use in a variety of products and applications.
Test individual parts and products to ensure that manufacturer and governmental quality and safety standards are met.
Assign staff to projects, given shifting priorities, and determine technologies and procedures to research and present to business group.
QUALIFICATIONS:
M.S.
or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field.
Preference shown to expertise in aerosols, coatings and to a lesser degree cleaners.
10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing
5 years of technical supervisory or management experience
3 years successful working experience with marketing group
Expertise in coatings for consumer and industrial markets with a strong knowledge of both water borne and solvent borne chemistry.
Strong understanding of manufacturing, quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-04-19 22:10:30
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura, and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Supervisor has the direct responsibility for leadership of the maintenance department, as well as maintaining and upgrading the site facilities and production equipment.
In addition, this position is responsible for the management of the Preventive Maintenance Program.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate and direct maintenance projects, making detailed plans to accomplish goals and direct the integration and implementation of technical activities.
Support the HS&E, Quality and Service, and Productivity/Cost sections of the facility plan as defined by scorecard activities.
Plan and direct the installation, testing, operation, maintenance, and repair of facilities and equipment.
Manage the Preventive Maintenance Program to ensure it reduces downtime and improves the overall reliability of production and production-supporting machinery.
Support capital project requirements for review and submission to management, including costs, schedule, and procedures.
Direct, review, and approve product design and changes consistent with Management of Change (MOC) procedures.
Analyze annual utility expenditures and develop a plan to optimize efficiency and reduce costs.
Perform administrative functions such as reviewing and writing reports, approving expenditures, and making decisions about the purchase of materials or services.
Investigate equipment failures and difficulties to diagnose faulty operation and work with the maintenance crew to implement the needed preventative measures.
Recommend design modifications to eliminate machine or system malfunctions.
Demonstrate a commitment to diversity in hiring and promotion decisions.
Effectively and efficiently onboard new employees.
Conduct annual performance evaluations and provide ongoing performance feedback, maintaining clear and timely documentation.
Coach and manage employees using CS&W philosophy and tools to ensure talent is developed and retained.
Apply Tremco policies and adhere to processes to ensure compliance and organizational best practices.
EDUCATION REQUIREMENT:
High school diploma or general education degree (GED).
EXPERIENCE REQUIREMENT:
A minimum of 5 years of maintenance experience in a manufacturing environment.
Familiarity with plant safety practices, chemical processes, equipment maintenance, statistical applications, and equipment operations is also required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Knowledge of the practical application of sound engineering and chemical plant practices.
This includes applying engineering principles and techniques to process design for the production of products and intermediates.
Knowledge of arithmetic, statistical methods, "Lean" concepts, ISO procedures, and their applications.
Ability to apply Excel, Word, and SAP applications to daily job responsibilities with an emphasis on system-driven solutions.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-04-19 22:09:32
-
JOB DESCRIPTION
The primary result expected from the R&D Technical Director will be to oversee an entire R&D group and manage discovery, innovation, scale up, and commercialization of existing and new cost effective quality technology by planning, directing, coordinating, and/or budgeting activities concerned with the design and completion of research and development projects, managing staff activities and results to quickly respond to market opportunities, and defending the corporation against competitive threats.
Plan laboratory experiments to confirm feasibility of processes and techniques used in the production of materials having unique characteristics.
Confer with customers to determine how to tailor materials to their needs.
Conduct research on the structures and properties of materials, such as adhesives, coatings, and polymers, to obtain information that could be used to develop new products or enhance existing ones.
Prepare reports of materials study findings for the use of other research & development associates and requestors.
Devise testing methods to evaluate the effects of various conditions on particular coatings.
Determine ways to strengthen or combine materials or develop new materials with new or specific properties for use in a variety of products and applications.
Test individual parts and products to ensure that manufacturer and governmental quality and safety standards are met.
Assign staff to projects, given shifting priorities, and determine technologies and procedures to research and present to business group.
QUALIFICATIONS:
M.S.
or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field.
Preference shown to expertise in aerosols, coatings and to a lesser degree cleaners.
10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing
5 years of technical supervisory or management experience
3 years successful working experience with marketing group
Expertise in coatings for consumer and industrial markets with a strong knowledge of both water borne and solvent borne chemistry.
Strong understanding of manufacturing, quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-04-19 22:09:27
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor.
Hand applies adhesive mesh to parts.
Mixes base coats and finishes with an electric drill and paddle.
Works as part of a team to run parts through extrusion equipment.
Assembles and pours mold for cast stone.
Trims parts with cutting equipment.
Assists in building custom crates based on project specifications.
Prepares and organizes parts for shipment.
Assists with shipping and receiving.
Follows all safety requirements.
Cleans equipment after use and assists the team with keeping production space clean and organized.
Assists with monthly inventory counts.
EDUCATION REQUIREMENT:
No formal educational requirement.
EXPERIENCE REQUIREMENT:
No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $19.55 and $22.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2026-04-19 06:09:18
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor.
Hand applies adhesive mesh to parts.
Mixes base coats and finishes with an electric drill and paddle.
Works as part of a team to run parts through extrusion equipment.
Assembles and pours mold for cast stone.
Trims parts with cutting equipment.
Assists in building custom crates based on project specifications.
Prepares and organizes parts for shipment.
Assists with shipping and receiving.
Follows all safety requirements.
Cleans equipment after use and assists the team with keeping production space clean and organized.
Assists with monthly inventory counts.
EDUCATION REQUIREMENT:
No formal educational requirement.
EXPERIENCE REQUIREMENT:
No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $19.55 and $22.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2026-04-19 06:08:10
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-04-18 22:11:08
-
JOB DESCRIPTION
Basic Function and Scope of Responsibilities:
Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment.
Reports to the Production supervisor and receives direction concerning sanitation activities.
Perform daily sanitation of all processing lines and mixing rooms.
Ensure food safety and food defense in the plant.
Promotes a safe work environment through knowledge of the sanitation program and commitment to a safe workplace for all.
Ensures that staff are informed of corporate safety requirements and that safety is a priority in day to day functions.
Develops and implements new methods, procedures, and systems to improve quality and food safety performance, determine and implement corrective actions.
Follow best practices for safety, SDS guidelines, and the proper use of personal protective equipment.
Responsible for filling out daily sanitation logs, performance reports and shift paperwork.
Regularly complete training in methods of improving sanitation processes
Makes certain that all areas are kept clean of waste, debris, and liquids to avoid safety hazards
Ensures that at the end of the shift all documentation pertinent to sanitation.
Maintains effective communications between the Manager and shift supervisors.
Other duties as assigned by manager.
Training, Skills, Knowledge and/or Experience:
Must possess good reading, writing and math skills.
Must always be safety conscious.
Must be able to lift up to 60 lbs.
Must be self-directed and able to work without close supervision
Willing and able to work overtime as needed
Hardworking, dependable, and safety conscious
Bilingual - English/Spanish is preferred
Willingness to work varied shifts, including nights, weekends and holidays
Strong quantitative skills, interpersonal skills and the ability to think critically.
Ability to effectively plan, organize and prioritize work.
Read and understand chemical labels.
Read and understand HACCP along with SQF and OSHA requirements.
Demonstrated ability to motivate and train employees
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability, and business travel insurance, flexible spending accounts, EAP, stock purchases, and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Mantrose Group offers paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Profile Food Ingredients is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Pay: From $18hr + DOE
ABOUT US
Mantrose Group is a world leader in specialty coatings and functional blends for the food, pharmaceutical and personal care industries.
Founded more than 100 years ago, Mantrose is proud to be part of RPM International Inc., a $5.6 billion multinational company with 14,600 employees worldwide and subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
The company has a diverse portfolio with hundreds of name-brand products, many of which are leaders in the markets they serve.
Mantrose-Haeuser Co., Inc.
has been at the forefront of developing superior edible coatings and specialty products for the pharmaceutical, confectionery, agricultural, food, personal care and industrial industries for decades.
Since our company was founded over 100 years ago, we have been delivering unparalleled results to our clients for all of their coating and custom product development needs.
NatureSeal® both an industry veteran and fresh-cut produce pioneer, has been a leading expert in shelf-life extension technology worldwide.
Our patented line of products has grown exponentially, offering produce solutions to the processor, foodservice and home use markets.
Profile Food Ingredients offers a wide range of specialty product formulations for use in dairy products, baked goods, beverages, confections, nutraceuticals, dips, dressings and sauces.
Its product line promotes uniformity, enhances texture, thickens, prevents separation and extends shelf life and includes clean label, non-GMO, organic and natural solutions.
Since 1946, Holton Food Products has been helping its customers succeed by providing quality ingredients, customized product development and technical support-all fueled by strong food science and applications experience.
This dedication and know-how has enabled our customers to build appealing product lines, increase sales and improve margins.Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois
Posted: 2026-04-18 22:10:52
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
The resident expert regarding process technology.
Responsible for investigating and implementing new process technology at the plant.
The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
GENERAL PURPOSE OF THE JOB:
The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training.
Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university.
Relevant experience from internship is acceptable for experience.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 22:10:44
-
JOB DESCRIPTION
Basic Function and Scope of Responsibilities:
Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment.
Reports to the Production supervisor and receives direction concerning sanitation activities.
Perform daily sanitation of all processing lines and mixing rooms.
Ensure food safety and food defense in the plant.
Promotes a safe work environment through knowledge of the sanitation program and commitment to a safe workplace for all.
Ensures that staff are informed of corporate safety requirements and that safety is a priority in day to day functions.
Develops and implements new methods, procedures, and systems to improve quality and food safety performance, determine and implement corrective actions.
Follow best practices for safety, SDS guidelines, and the proper use of personal protective equipment.
Responsible for filling out daily sanitation logs, performance reports and shift paperwork.
Regularly complete training in methods of improving sanitation processes
Makes certain that all areas are kept clean of waste, debris, and liquids to avoid safety hazards
Ensures that at the end of the shift all documentation pertinent to sanitation.
Maintains effective communications between the Manager and shift supervisors.
Other duties as assigned by manager.
Training, Skills, Knowledge and/or Experience:
Must possess good reading, writing and math skills.
Must always be safety conscious.
Must be able to lift up to 60 lbs.
Must be self-directed and able to work without close supervision
Willing and able to work overtime as needed
Hardworking, dependable, and safety conscious
Bilingual - English/Spanish is preferred
Willingness to work varied shifts, including nights, weekends and holidays
Strong quantitative skills, interpersonal skills and the ability to think critically.
Ability to effectively plan, organize and prioritize work.
Read and understand chemical labels.
Read and understand HACCP along with SQF and OSHA requirements.
Demonstrated ability to motivate and train employees
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability, and business travel insurance, flexible spending accounts, EAP, stock purchases, and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Mantrose Group offers paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Profile Food Ingredients is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Pay: From $18hr + DOE
ABOUT US
Mantrose Group is a world leader in specialty coatings and functional blends for the food, pharmaceutical and personal care industries.
Founded more than 100 years ago, Mantrose is proud to be part of RPM International Inc., a $5.6 billion multinational company with 14,600 employees worldwide and subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
The company has a diverse portfolio with hundreds of name-brand products, many of which are leaders in the markets they serve.
Mantrose-Haeuser Co., Inc.
has been at the forefront of developing superior edible coatings and specialty products for the pharmaceutical, confectionery, agricultural, food, personal care and industrial industries for decades.
Since our company was founded over 100 years ago, we have been delivering unparalleled results to our clients for all of their coating and custom product development needs.
NatureSeal® both an industry veteran and fresh-cut produce pioneer, has been a leading expert in shelf-life extension technology worldwide.
Our patented line of products has grown exponentially, offering produce solutions to the processor, foodservice and home use markets.
Profile Food Ingredients offers a wide range of specialty product formulations for use in dairy products, baked goods, beverages, confections, nutraceuticals, dips, dressings and sauces.
Its product line promotes uniformity, enhances texture, thickens, prevents separation and extends shelf life and includes clean label, non-GMO, organic and natural solutions.
Since 1946, Holton Food Products has been helping its customers succeed by providing quality ingredients, customized product development and technical support-all fueled by strong food science and applications experience.
This dedication and know-how has enabled our customers to build appealing product lines, increase sales and improve margins.Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois
Posted: 2026-04-18 22:09:46
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-04-18 22:09:42
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
The resident expert regarding process technology.
Responsible for investigating and implementing new process technology at the plant.
The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
GENERAL PURPOSE OF THE JOB:
The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training.
Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university.
Relevant experience from internship is acceptable for experience.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 14:09:34
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Supervise the quality process to ensure the production environment has what is needed to meet key business/manufacturing metrics, which satisfy customer needs and product standards.
Key responsibilities include spending time on the production floor, performing quality checks on finished products and raw materials, overseeing manufacturing processes and controls, striving for continuous improvement, and supporting ISO quality systems and compliance.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Oversee all quality-related functions in the plant.
Participate in the development of specifications for processing, products, and materials.
Perform all required quality tests for raw materials, work in progress, and finished products.
Ensure that quality checks are performed at the required frequency and targets.
Additionally, periodically evaluate target levels and amend as appropriate.
Regularly audit products and processes to ensure standard work is executed on the floor and in the lab.
Ensure that any non-conforming product is properly identified for a decision on disposition by Management.
Track, report, and reduce manufacturing waste.
Work directly with purchasing personnel on vendor quality or supply issues; assist with vendor selection and qualification.
Lead ISO Quality systems.
Research customer complaints, including but not limited to engaging in root cause investigation, suggesting corrective action, implementing actions, and providing follow-up while following the SAP quality process and maintaining metrics.
Manage all lab functions and staff, while assuring the safety and integrity of those operations and employees.
Maintain all testing equipment and ensure that it is in proper working order.
Organize and maintain related files, logs, and reports.
Develop quality standards/test/inspection plan for raw materials and finished products (specification, sample size, and frequency) as well as a robust training process.
Develop lean and sustainable saving plans and facilitate small K generation and implementation.
Lead all product compliance activities to ensure certification.
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
EXPERIENCE REQUIREMENTS:
Minimum of 3 years' experience in quality control within a manufacturing environment with a minimum of 2 years' supervisory experience.
Demonstrated knowledge and experience in quality-related programs such as lean, ISO, six sigma, etc.
EDUCATION REQUIREMENTS:
High School Diploma required.
A bachelor's degree in quality, chemistry, chemical engineering, or a related field is preferred.
OTHER SKILLS AND ABILITIES:
Familiarity with manufacturing regulations and reporting methods.
Knowledge of the production process and team interactions.
Analytical acumen for compiling and analyzing data.
Ability to plan, organize, follow through, and prioritize.
Ability to interact with all levels within the organization.
Strong verbal and written communication abilities.
Quality and safety oriented with attention to detail.
Training in quality programs (lean, ISO, Six Sigma). Benefits:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 14:09:10
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
Want to learn more about who we are and what we do? Take a moment to explore our website and discover what sets us apart.
We encourage all applicants to check it out before applying! TCMC | Tremco CPG Inc.
GENERAL PURPOSE OF THE JOB: Assistant Process Operator in our Chemical plant located in Corsicana.
If you are a strong operation's professional with a proven track record of success working in chemical plants, we invite you to apply.
This is your opportunity to join a large growing company offering a competitive base salary, benefits and pension.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Complete work functions within Chemical production operations.
Responsible for the quality blending of finished products and the bulk, drum, and pail packaging of products.
Full understanding of Chemical Hazards specific to area assigned to, including PPE.
General forklift duties.
The core responsibility for blending and packaging of products demands the use of mechanical and electrical equipment such as pumps, mixing equipment, and automation control systems.
Completion and compliance of all safety initiatives and certification requirements including all near miss and incident reporting.
Accountable for the data entry of production tickets, good receipts, and shipping documentation.
Daily inspection of work area and monthly document reporting.
Ensure that a clean organized work environment is maintained at all times.
Assist with physical inventory counts and processes.
Compliance with all applicable ISO requirements.
Other duties as assigned by supervisor.
EDUCATION REQUIREMENT:
High school diploma or equivalent.
Preferred, 2-year Process Technology Degree.
EXPERIENCE REQUIREMENT:
Preferred, Manufacturing, Chemical or Technical experience 2+ years.
Preferred, Forklift experience certified.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Good Attendance record.
Able to Work 12-hour shift: Dupont Schedule, Day and Graveyard rotation.
Ability to work in the US without sponsorship.
PHYSICAL DEMANDS:
Ability to lift and carry 50 lbs.
Ability to bend, squat down, and reach above your head throughout the day,
Ability to climb stairs and ladders.
Must be able to wear fall protection, and work at heights.
Must be able to wear respirator approx.
2 hours per day and work in confined spaces.
Forklift experience certified.
24 hour Hazpower.
BENEFITS AND COMPENSATION:
The hourly starting rate for applicants in this position wage is $25.00 plus a $1.00 shift premium.
This amount is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
This position is also eligible for a 6% annual bonus.
This position will practice the DuPont work schedule.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2026-04-18 14:09:06
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 14:09:02
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 14:09:02
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 14:08:47
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Supervise the quality process to ensure the production environment has what is needed to meet key business/manufacturing metrics, which satisfy customer needs and product standards.
Key responsibilities include spending time on the production floor, performing quality checks on finished products and raw materials, overseeing manufacturing processes and controls, striving for continuous improvement, and supporting ISO quality systems and compliance.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Oversee all quality-related functions in the plant.
Participate in the development of specifications for processing, products, and materials.
Perform all required quality tests for raw materials, work in progress, and finished products.
Ensure that quality checks are performed at the required frequency and targets.
Additionally, periodically evaluate target levels and amend as appropriate.
Regularly audit products and processes to ensure standard work is executed on the floor and in the lab.
Ensure that any non-conforming product is properly identified for a decision on disposition by Management.
Track, report, and reduce manufacturing waste.
Work directly with purchasing personnel on vendor quality or supply issues; assist with vendor selection and qualification.
Lead ISO Quality systems.
Research customer complaints, including but not limited to engaging in root cause investigation, suggesting corrective action, implementing actions, and providing follow-up while following the SAP quality process and maintaining metrics.
Manage all lab functions and staff, while assuring the safety and integrity of those operations and employees.
Maintain all testing equipment and ensure that it is in proper working order.
Organize and maintain related files, logs, and reports.
Develop quality standards/test/inspection plan for raw materials and finished products (specification, sample size, and frequency) as well as a robust training process.
Develop lean and sustainable saving plans and facilitate small K generation and implementation.
Lead all product compliance activities to ensure certification.
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility, such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure the sustainability and continuity of the area of responsibility.
EXPERIENCE REQUIREMENTS:
Minimum of 3 years' experience in quality control within a manufacturing environment with a minimum of 2 years' supervisory experience.
Demonstrated knowledge and experience in quality-related programs such as lean, ISO, six sigma, etc.
EDUCATION REQUIREMENTS:
High School Diploma required.
A bachelor's degree in quality, chemistry, chemical engineering, or a related field is preferred.
OTHER SKILLS AND ABILITIES:
Familiarity with manufacturing regulations and reporting methods.
Knowledge of the production process and team interactions.
Analytical acumen for compiling and analyzing data.
Ability to plan, organize, follow through, and prioritize.
Ability to interact with all levels within the organization.
Strong verbal and written communication abilities.
Quality and safety oriented with attention to detail.
Training in quality programs (lean, ISO, Six Sigma). Benefits:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 14:08:46
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 14:08:43
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Operates industrial blenders in accordance with established production schedules.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Inspects equipment, structures, and materials to identify problems or defects before production to ensure a clean, clear, and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or products per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set up, cleaned, sanitized, and operated properly before, after, and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts ongoing assessment of quality control and operational procedures.
Meets and/or exceeds production goals and guidelines for daily/weekly production runs.
Observes plant safety rules and regulations at all times and reports all safety hazards in a timely manner.
Other duties as assigned.
EDUCATION REQUIREMENT:
No formal education required.
EXPERIENCE REQUIREMENT:
No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment, and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations, including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions, and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-04-17 14:10:05
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-04-17 14:09:57
-
JOB DESCRIPTION
Commercial Roofing Foreman
Benefits:
Base Salary + Annual Bonus Eligible for overtime 401K Health Insurance Paid time-off Company Vehicle
Essential Duties & Responsibilities
Conduct the daily onsite safety brief prior to the start of the WTI project with the Sales Rep, customer and the WTI Crew.
Inspect and ensure all surroundings, equipment and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit to the Supervisors as applicable Ensure all project communication is completed prior to the start of any WTI project.
This includes but is not limited to communication with: Sales Rep on weekly/daily schedule WTI crew members to discuss scope of work and daily tasks The customer pre-arrival, at arrival and at completion of the day's work WTI Supervisor on schedule changes, project, and crew updates, etc. Efficient project management will include managing crew start and end times and production rates, ensuring tools and materials are available to complete the assigned project safely and efficiently, and completing the project per the scope or work or specification. The WTI Foreman will complete an end of day and/or end of project walk through to ensure quality repairs and address any items prior to leaving the job site.
Before and after pictures will be sent to the Sales Rep and information will be sent daily on project status.
These items will include, detailed work performed updates, materials consumed, and supplies purchases are all recording daily. Ensure that all WTI Field Reps will have a professional appearance and customer interaction while completing services for a customer. The Field Resource Foreman is responsible for the ordering, tracking, and monitoring inventory and ensure Quarterly cycle counts are completed and submitted timely. Per pricing procedures review each field service project over $5,000 for pricing accuracy. Submit all projects over $20,000 to the WTI Supervisor prior to submitting to the Sales Rep or customer. Manage, monitor, and document performance of Field Resource Reps and take appropriate steps or corrective measures to resolve employee and work-related issues.
Consult with WTI Field Resource Supervisor and Human Resources as needed. Perform any other duty and/or project as required or assigned by the WTI Supervisor and/or Regional Manager.
Skills & Qualifications
Minimum five years' experience in the commercial roofing industry. Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems as well as metal and other steep slope roofing systems and how to properly repair them.
The salary range for applicants in this position generally ranges between $53,000 and $65,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: San Francisco, California
Posted: 2026-04-17 14:09:51
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Operates industrial blenders in accordance with established production schedules.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Inspects equipment, structures, and materials to identify problems or defects before production to ensure a clean, clear, and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or products per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set up, cleaned, sanitized, and operated properly before, after, and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts ongoing assessment of quality control and operational procedures.
Meets and/or exceeds production goals and guidelines for daily/weekly production runs.
Observes plant safety rules and regulations at all times and reports all safety hazards in a timely manner.
Other duties as assigned.
EDUCATION REQUIREMENT:
No formal education required.
EXPERIENCE REQUIREMENT:
No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment, and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations, including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions, and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-04-17 14:09:32
