-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-07-16 15:08:30
-
Quality Control Inspector
Beckenham
£32'000- £40'000 + Variety Of Work + Technical Training + Flexi Time + Competitive Pension + Stability + Family Feel Environment + Immediate Start
An excellent opportunity for a Quality Control Inspector with CMM inspection experience to join a close-knit and highly skilled team where your attention to detail and expertise will be genuinely valued.
This company operates within the medical sector, supplying specialist products across Europe.
Due to continued growth, they are looking for a Quality Control Inspector who enjoys hands-on inspection work and wants to contribute to meaningful, high-precision projects.
As part of a small team, you will play a key role in ensuring products meet the highest quality standards, carrying out detailed inspections and supporting continuous improvement across the quality department.
As A Quality Control Inspector You Will Be:
Site Based - Monday - Friday 37.5 Hour Week
Operating ZEISS CMM Equipment
Carrying Out First-Off, In-Process and Final Inspection
Measuring Components Using Precision Measuring Equipment
Recording Inspection Results and Completing Quality Documentation
Supporting Continuous Improvement Activities
The Successful Quality Control Inspector Will Have:
Experience using CMM technology (ZEISS desirable)
Inspection and Testing experience within a manufacturing environment
Experience using precision measuring equipment
Ability to read and interpret engineering drawings
Commutable to Beckenham
If interested, please apply or contact Charlie Auburn on 02038137949 for immediate consideration.
Keywords: ZEISS, CMM, Quality Control Inspector, Quality Inspector, Inspector, Inspection, Metrology, Precision Engineering, Manufacturing, Medical Devices, Healthcare, Engineering, Quality, Beckenham, Kent, Bromley, London, South London, South East London.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit, should not apply as your details will not be processed.
We will endeavour to respond to all applicants; however, due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: Beckenham, England
Start: ASAP
Salary / Rate: £32000 - £40000 per annum + Leading Package + Progression
Posted: 2026-07-16 15:01:27
-
An exciting opportunity has arisen for a Quality Control Inspector, based in Portsmouth, to join a global leader specialising in high-tech electronic technologies.
The Quality Control Inspector, based in Portsmouth, will ensure all components meet quality standards before leaving the manufacturing area, preventing errors within the process to deliver a quality product to the customer.
Key Responsibilities and Accountabilities
Carry out shopfloor inspections on product, ensuring customer specifications/industry standards are met i.E.
AS9100, MIL Standard
Ensure compliance with quality procedures, validating product quality against internal & external standards
Use various measuring tools to make sure components/parts/products are within standard variances
Record inspection information and update quality database as required
Raise non-conformance paperwork
Share findings of inspections with quality and production management individuals
This is a unique chance to join a forward-thinking company in an exciting technology market who can offer the opportunity of career progression and personal development.
To apply for this Quality Control Inspector role based in Portsmouth, please send your CV to jthompson@redlinegroup.Com, or for more information contact James Thompson on 01582 878831 ....Read more...
Type: Permanent Location: Portsmouth, England
Start: ASAP
Salary / Rate: £25000 - £30000 per annum
Posted: 2026-07-16 14:56:35
-
We are looking for a reliable and hardworking General Operative to join a busy and growing manufacturing team in Morley.This is a varied, hands-on role where you will support the day-to-day production process, helping to ensure products are manufactured efficiently and to a high standard.
The successful candidate will be willing to learn, work well as part of a team, and take pride in producing quality work.Their LEEDS-based facility is based just a few minutes from the M62 and M1 motorways, meaning the successful candidate will easily be able to commute from surrounding towns & cities, including Wakefield, Bradford, Huddersfield and Dewsbury.Key Responsibilities of the General Operative
Load, unload and move materials safely around the workshop and yard.
Prepare and organise products ready for storage, collection and delivery.
Keep the yard and work areas clean, tidy and safe.
Support stock control and carry out general labouring duties as required.
Work as part of a team to meet deadlines while following health and safety procedures.
I would be keen to speak to individuals who possess
Previous experience in a labouring, warehouse, yard operative or general operative role.
A hardworking and reliable attitude, with the ability to carry out physically demanding work.
Good awareness of health and safety procedures and the ability to follow instructions.
Strong teamwork and communication skills, with a flexible approach to working indoors and outdoors.
Experience using power tools and an FLT and working with steel product range.
Working Hours of the General Operative
Monday- Thursday: 07:30-16:30
Friday- 07:30-12:30
In Return, the General Operative will receive
Hourly Rate: £14.05 Per Hour
Early finish on a Friday
34 days paid holiday
Cycle to work scheme
Option to purchase an extra 4 holidays.
If you are interested in the General Operative role, please click “APPLY NOW” and upload your most recent CV, alternatively contact Ismail at E3 Recruitment. ....Read more...
Type: Permanent Location: Leeds, England
Start: ASAP
Salary / Rate: Up to £14.05 per hour
Posted: 2026-07-16 10:40:33
-
Quality Inspector
We are looking for an experienced Quality Inspector to join a busy Bournemouth based manufacturing quality team.
This is an excellent opportunity for someone with strong metrology, CMM inspection, and quality control experience to work on precision components in a fast-paced engineering environment.
Reporting to the Quality Manager, you will carry out inspection activities, support incoming goods and internal quality processes, and help ensure components meet customer, engineering, and regulatory requirements.
About the Role
As a Quality Inspector, you will be responsible for material inspection, dimensional measurement, and quality assurance activities across manufactured and procured components.
You will also provide metrology support to the inspection team and contribute to containment, non-conformance, and continuous improvement activities.
Key Responsibilities for the quality inspector job based in Bournemouth
Inspect components against engineering drawings, specifications, and defined quality standards.
Carry out incoming goods inspection and in-process quality checks.
Operate and create inspection programmes for CMM and VMM equipment.
Produce accurate inspection reports and measurement documentation.
Raise and manage non-conformance reports (NCRs) and support containment actions.
Review inspection documentation including ISIR, FAIR, and PPAP records.
Support root cause analysis and corrective actions for product and process issues.
Maintain inspection procedures, records, and quality documentation in line with customer and internal requirements.
Ensure inspection and measurement equipment is maintained and appropriately calibrated.
Work closely with quality, production, engineering, and manufacturing teams to support product quality.
Contribute to audits, new product introduction, and continuous improvement initiatives.
Promote high standards of housekeeping, health and safety, and quality compliance.
What We're Looking for, for the quality inspector job based in Bournemouth
Experience as a Quality Inspector, Quality Technician, or similar role within manufacturing or engineering.
Strong metrology knowledge and hands-on inspection experience.
Experience operating and ideally programming CMM equipment, with knowledge of PC-DMIS and/or CAMIO.
Ability to use manual inspection tools such as calipers, micrometers, height gauges, and indicators.
Confident reading and interpreting technical engineering drawings and measurement plans.
Good IT skills, including Microsoft Office.
Excellent attention to detail, accuracy, and documentation standards.
Strong communication skills and the ability to work effectively with cross-functional teams.
Ability to work to deadlines in a busy production environment.
Technical or engineering qualification, or a recognised apprenticeship, would be advantageous.
Fluent written and spoken English.
Compliance and Standards
You will be expected to maintain high standards of health and safety, follow quality procedures, and support compliance with relevant internal and external regulations.
This is a great opportunity to join a quality-focused engineering environment where you can apply your inspection and metrology expertise, contribute to continuous improvement, and play a key role in maintaining high product standards.
We welcome applications from all suitably qualified candidates and are committed to creating an inclusive recruitment process.
If you need any adjustments during the application process, these can be discussed on request.
If you are interested in this Quality Inspector job, please send over an updated CV to nking@redlinegroup.Com or call 01582 878839 for more information. ....Read more...
Type: Permanent Location: Bournemouth, England
Start: ASAP
Salary / Rate: £28000 - £32000 per annum
Posted: 2026-07-16 00:00:04
-
Our client, a well-established electronics manufacturing services provider, is looking for an SMT Machine Operator to join their team on a permanent basis in Berkshire.
This is an excellent opportunity to join a growing manufacturing business operating from a modern facility, supporting the production of high-quality electronic assemblies for customers across a diverse range of industries.
Key responsibilities of the SMT Machine Operator job in Berkshire:
Load and prepare feeders for SMT production requirements.
Carry out PCB setup and handling for production line processes.
Set up and operate solder paste printing equipment, including stencil loading, programme creation, production processing, and stencil cleaning.
Set up, programme, and operate SMT placement machines.
Create and maintain machine programmes in line with production requirements.
Process production runs efficiently while maintaining quality standards.
Strip machines following production and return components to kits in the correct order.
Operate reflow ovens to process assembled PCBs.
Follow work instructions, build documentation, and quality procedures accurately.
Support continuous improvement initiatives and maintain a safe working environment.
Experience required for the SMT Machine Operator job in Berkshire.
Experience in a similar SMT manufacturing role.
Good knowledge of PCB-level SMT component assembly.
Basic understanding of PCB technologies.
Strong knowledge of SMT assembly processes and manufacturing techniques.
Experience reading and following work/build instructions.
Knowledge of IPC-A-610 (Acceptability of Electronic Assemblies) would be advantageous.
Understanding of Moisture Sensitivity Levels(MSL).
Good IT skills, including experience using machine control and programming software.
Ability to communicate clearly and effectively within a manufacturing environment.
Strong attention to detail and commitment to quality.
Self-motivated with the ability to work independently and as part of a team.
Benefits include:
Company pension scheme.
Life insurance.
Free flu vaccinations.
Free on-site parking.
Opportunity to work with modern SMT manufacturing equipment.
Career development within an established and growing electronics manufacturing business.
If this SMT Machine Operator job in Berkshire could be of interest, please contact James Thompson via jthompson@redlinegroup.Com ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Posted: 2026-07-15 15:27:07
-
JOB DESCRIPTION
Position Summary:
Responsible for blending and mixing of various pigments, resins, hardeners, and other raw material additives to produce acceptable in-process batches per approved batch instruction sheets with a minimal number of corrections.
Essential Functions:
Stages and prepares all raw materials associated with production batches
Maintains orderliness and cleanliness in batch making area and proper storage of batch area inventories
Communicates low levels of raw materials to the Plant Supervisor
Develops a thorough knowledge of raw material storage tanks, valving and piping, their contents, actuation, and directions of flow
Maintains a good working relationship with Quality Control
Must be capable of logical structuring of the batch making process, particularly optimization of mixer usage and efficiency
Reports on all spills and leaks, equipment malfunction, safety hazards, accidents, near-miss accidents, and material shortages immediately to the production supervisor
Acknowledges and understands the hazards and safety precautions required for working with inorganic metal-based powdered pigments and modifies work and hygiene practices accordingly.
Preferred Requirements:
Some college level chemistry
Sector-specific batching/manufacturing experience
Minimum Requirements:
High school diploma or GED
Minimum 2 years prior related experience or 1 years' experience as a production batchmaker.
Ability to take initiative in completing assigned work and projects.
Excellent organizational and multi-tasking abilities.
Ability to be resourceful and proactive when issues arise.
Strong communication skills.
Physical Requirements:
Must pass standard eye exam (corrected or uncorrected) and must pass standard color-tone testing
Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency
Lifting up to 50 lbs.
Stooping, bending, squatting up to 50% of the time
Standing and walking up to 90% of the time.
This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $21.00/hour and $23.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2026-07-15 15:10:42
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation and controls to minimize downtime.
Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of organization including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventative Maintenance Program to ensure completion and accuracy.
Other projects and tasks assigned.
Crosstrain on other production functions to aid as business need dictates.
EDUCATION REQUIREMENT:
One-year certificate from college, technical school or manufacturing training program.
One additional year of experience plus a high school diploma/GED in lieu of higher education is acceptable.
Two additional years of experience in lieu of formal education is acceptable.
EXPERIENCE REQUIREMENT:
Maintenance Technician III: 3+ years of experience
CERTIFICATES, LICENSES, REGISTRATIONS: Indicate if required or preferred.
Forklift License preferred OTHER SKILLS AND ABILITIES: Indicate if required or preferred.
Experience in 480-volt 3 phase electricity required (Preferred in some locations)
Capable of installing, programming, and troubleshooting PLC; AC/DC drive motors preferred
Ability to troubleshoot electric, air systems, and hydraulic systems
Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit
Ability to work overtime as needed; ability to meet deadlines
Ability to manage multiple priorities and respond urgently to down equipment
Effective team player, self-motivated, quick learner
Good communication skills with the ability to read, write, and communicate fluently in English
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-07-15 15:10:36
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Process Engineer II is an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor, lead major process equipment projects, and mentor less experienced engineers.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute scheduled PHA's and JSA's.
Proactively monitor areas and remediate potential safety issues.
LEAN Culture
Develop and execute "standard work" activities.
Improve productivity through the elimination of non-value-added activities.
Apply Engineering principles and methodologies to improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Significant experience with equipment troubleshooting and process design.
Project Management
Must be capable of successfully managing major process equipment projects (>$750k) on time and on budget.
Managerial
Must be capable of leading and/or supervising others in their role or in the execution of completing a project.
Mentors less experienced engineers.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical, Electrical, Controls, or similar Engineering Degree.
EXPERIENCE REQUIREMENT:
Bachelor's Degree (B.S.) in Chemical Engineering or Mechanical Engineering from an ABET-accredited university.
Two to four years of related experience and/or training.
Must have experience in both practical Process Engineering and Project Management.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Black Belt is preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficiency in workflow processes, value stream efficiency, and systems thinking.
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Must be knowledgeable in the Project Management software being used.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-07-15 15:10:32
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Process Engineer II is an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor, lead major process equipment projects, and mentor less experienced engineers.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute scheduled PHA's and JSA's.
Proactively monitor areas and remediate potential safety issues.
LEAN Culture
Develop and execute "standard work" activities.
Improve productivity through the elimination of non-value-added activities.
Apply Engineering principles and methodologies to improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Significant experience with equipment troubleshooting and process design.
Project Management
Must be capable of successfully managing major process equipment projects (>$750k) on time and on budget.
Managerial
Must be capable of leading and/or supervising others in their role or in the execution of completing a project.
Mentors less experienced engineers.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical, Electrical, Controls, or similar Engineering Degree.
EXPERIENCE REQUIREMENT:
Bachelor's Degree (B.S.) in Chemical Engineering or Mechanical Engineering from an ABET-accredited university.
Two to four years of related experience and/or training.
Must have experience in both practical Process Engineering and Project Management.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Black Belt is preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficiency in workflow processes, value stream efficiency, and systems thinking.
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Must be knowledgeable in the Project Management software being used.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-07-15 15:10:27
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation and controls to minimize downtime.
Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of organization including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventative Maintenance Program to ensure completion and accuracy.
Other projects and tasks assigned.
Crosstrain on other production functions to aid as business need dictates.
EDUCATION REQUIREMENT:
One-year certificate from college, technical school or manufacturing training program.
One additional year of experience plus a high school diploma/GED in lieu of higher education is acceptable.
Two additional years of experience in lieu of formal education is acceptable.
EXPERIENCE REQUIREMENT:
Maintenance Technician III: 3+ years of experience
CERTIFICATES, LICENSES, REGISTRATIONS: Indicate if required or preferred.
Forklift License preferred OTHER SKILLS AND ABILITIES: Indicate if required or preferred.
Experience in 480-volt 3 phase electricity required (Preferred in some locations)
Capable of installing, programming, and troubleshooting PLC; AC/DC drive motors preferred
Ability to troubleshoot electric, air systems, and hydraulic systems
Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit
Ability to work overtime as needed; ability to meet deadlines
Ability to manage multiple priorities and respond urgently to down equipment
Effective team player, self-motivated, quick learner
Good communication skills with the ability to read, write, and communicate fluently in English
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-07-15 15:09:45
-
Bodyshop Advisor / Customer Service Advisor Role:
- Salary up to £36,000 per annum
- Permanent role
I am currently working with a highly efficient and well equipped Bodyshop who are now looking for an experienced Bodyshop Advisor to join their busy site in the Maidenhead area.
Key Responsibilities as a Bodyshop Advisor / Customer Service Advisor:
- You will be responsible for the meet and greet of customers, bookings, courtesy car diary control, and customer updates.
- Liaising with third party companies such as insurance and car hire companies.
- As the first point of contact for customers the role requires a motivated and enthusiastic individual with excellent communication skills.
As a Bodyshop Advisor / Customer Service Advisor you will:
- Must have worked / or currently working within a similar role within an accident repair centre or within the Motor Trade.
- These tasks require excellent organisational skills with an attention to detail and a quality focus.
- You must have similar experience as an administrator or customer service advisor within the motor trade ideally within an accident repair centre
If you are interested in finding out more get in contact by calling Piam Pishgoo on 01202 55291 / piam@holtautomotive.co.uk or send us your CV by Clicking Apply Now!
....Read more...
Type: Permanent Location: Maidenhead,England
Start: 15/07/2026
Duration: 0.0 MONTH
Salary / Rate: £36000 per annum
Posted: 2026-07-15 15:06:04
-
Flexible working hours, company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Quality Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff.
This employer is recognised globally for quality and innovative deliverables.The successful Quality Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns &; cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Quality Engineer will include:
Maintain and improve the ISO 9001:2015 Quality Management System, ensuring compliance with customer, regulatory, and defence standards.
Provide quality assurance support within cross-functional teams, ensuring adherence to project, contractual, and customer requirements.
Plan and conduct internal audits aligned with ISO and AQAP standards, applying risk-based thinking to ensure system effectiveness.
Manage non-conformances and supplier defects in SAP, ensuring root cause analysis and effective CAPA implementation.
Lead investigations into defects, near misses, and complaints using structured problem-solving methods (e.g., 8D, 5 Whys).
Oversee quality documentation, inspections, and validation activities to ensure product conformity throughout production.
Monitor quality performance, drive continuous improvement, and engage with customers, suppliers, and auditors to ensure ongoing compliance.
For the Quality Engineer role, we are keen to receive CV's from candidates who possess:
Experience as a Quality Engineer or similar within an Engineering or manufacturing environment
Ability to read and understand detailed mechanical drawings, Geometric Dimension and Tolerancing
Open to travel UK and Overseas - Full Clean Licence
Apprentice trained or a HNC/HND in Mechanical Engineering or similar
Salary & Benefits:
up to £44,000 depending on experience
Flexible working hours
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions.
These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Quality Engineer role, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information.
....Read more...
Type: Permanent Location: Brighouse, England
Start: ASAP
Salary / Rate: £39000.00 - £44000.00 per annum
Posted: 2026-07-15 12:38:41
-
Flexible working hours, company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Lead Quality Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff.
This employer is recognised globally for quality and innovative deliverables.The successful Lead Quality Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Lead Quality Engineer will include:
Oversee and govern the ISO 9001:2015 Business Management System (BMS), ensuring ongoing effectiveness through structured auditing
Ensure consistent implementation of policies, processes, and compliance requirements across the organisation, including documentation control and training support
Monitor, review, and continuously improve systems, procedures, and practices in line with regulatory, international, and customer standards
Provide expert guidance, coaching, and recommendations to stakeholders on BMS performance and improvement opportunities
Lead the planning and delivery of accreditations (e.g.
ISO9001, AQAP, and customer-specific requirements)
Manage internal, customer, and third-party audit programmes, driving corrective actions and embedding risk-based thinking
Support quality excellence through advanced tools, KPI reporting, and cross-functional engagement, including APQP, FMEA, CoPQ analysis, and active participation in business and customer reviews
For the Lead Quality Engineer role, we are keen to receive CV's from candidates who possess:
Strong experience in management system documentation, including procedures, policies, reports, risk assessments, and investigations
Proven background in implementing and governing ISO 9001:2015 (or equivalent) systems, with Lead Auditor certification (ISO 14001/45001 desirable)
Extensive audit experience across internal, supplier, customer, and third-party audits, including managing corrective and preventative actions
Practical knowledge of core quality tools and methodologies such as APQP, PPAP, FMEA, and Control Plans within engineering environments
Technically competent with engineering principles and drawings (including GD&T), supported by relevant qualifications, data analysis capability, and strong communication skills
Salary & Benefits:
up to £50,000 depending on experience
Flexible working hours
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions.
These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Lead Quality Engineer role, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information.
....Read more...
Type: Permanent Location: Brighouse, England
Start: ASAP
Salary / Rate: £45000.00 - £50000.00 per annum
Posted: 2026-07-15 12:34:13
-
JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx.
100 lbs.
over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Philadelphia, Pennsylvania
Posted: 2026-07-15 07:08:39
-
JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx.
100 lbs.
over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2026-07-15 07:08:25
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Assembly Operator is responsible for fabricating and assembling components into finished industrial products including testing, inspection, and packaging for final delivery.
Work Schedule
Monday - Thursday
Supervision Responsibility:
None
Essential Duties
Assemble product according to work instructions (mechanical and wiring).
Operate hand tools, power tools, and machinery to complete assigned tasks.
Work efficiently within a team to meet daily production targets.
Perform routine preventive maintenance.
Keep the workstation clean and organized.
Follow safety protocols, including proper handling of electrical components and refrigerants.
Perform visual and functional quality checks on components and finished units.
Identify and report any defects, malfunctions, or safety concerns to supervisors.
Assist in training, troubleshooting, and data entry.
Understand drawings and BOMs to ensure proper assembly of products.
Certification and training in specialized production processes and equipment.
Perform other related duties as assigned.
Minimum Qualifications
High School Diploma or GED required.
Employment Standards
Knowledge of production preferred.
Skill in verbal and written communication, including the ability to follow both verbal and written instructions.
Skilled at working in an ever changing, fast-paced environment.
Skilled in paying attention to detail and problem-solving skills.
Knowledge and demonstration of safety procedures.
Ability to operate machinery and hand tools.
Ability to lift heavy objects (typically up to 50lbs) and stand for long periods.
Ability to understand manufacturing safety protocols.
Ability to pass a pre-employment background check.
Hiring Range
Between $18.00 - $25.25 per hour.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-07-15 07:08:24
-
JOB DESCRIPTION
Position Summary:
Responsible for blending and mixing of various pigments, resins, hardeners, and other raw material additives to produce acceptable in-process batches per approved batch instruction sheets with a minimal number of corrections.
Essential Functions:
Stages and prepares all raw materials associated with production batches
Maintains orderliness and cleanliness in batch making area and proper storage of batch area inventories
Communicates low levels of raw materials to the Plant Supervisor
Develops a thorough knowledge of raw material storage tanks, valving and piping, their contents, actuation, and directions of flow
Maintains a good working relationship with Quality Control
Must be capable of logical structuring of the batch making process, particularly optimization of mixer usage and efficiency
Reports on all spills and leaks, equipment malfunction, safety hazards, accidents, near-miss accidents, and material shortages immediately to the production supervisor
Acknowledges and understands the hazards and safety precautions required for working with inorganic metal-based powdered pigments and modifies work and hygiene practices accordingly.
Preferred Requirements:
Some college level chemistry
Sector-specific batching/manufacturing experience
Minimum Requirements:
High school diploma or GED
Minimum 2 years prior related experience or 1 years' experience as a production batchmaker.
Ability to take initiative in completing assigned work and projects.
Excellent organizational and multi-tasking abilities.
Ability to be resourceful and proactive when issues arise.
Strong communication skills.
Physical Requirements:
Must pass standard eye exam (corrected or uncorrected) and must pass standard color-tone testing
Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency
Lifting up to 50 lbs.
Stooping, bending, squatting up to 50% of the time
Standing and walking up to 90% of the time.
This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $21.00/hour and $23.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2026-07-15 07:08:23
-
JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx.
100 lbs.
over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2026-07-15 07:08:11
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Assembly Operator is responsible for fabricating and assembling components into finished industrial products including testing, inspection, and packaging for final delivery.
Work Schedule
Monday - Thursday
Supervision Responsibility:
None
Essential Duties
Assemble product according to work instructions (mechanical and wiring).
Operate hand tools, power tools, and machinery to complete assigned tasks.
Work efficiently within a team to meet daily production targets.
Perform routine preventive maintenance.
Keep the workstation clean and organized.
Follow safety protocols, including proper handling of electrical components and refrigerants.
Perform visual and functional quality checks on components and finished units.
Identify and report any defects, malfunctions, or safety concerns to supervisors.
Assist in training, troubleshooting, and data entry.
Understand drawings and BOMs to ensure proper assembly of products.
Certification and training in specialized production processes and equipment.
Perform other related duties as assigned.
Minimum Qualifications
High School Diploma or GED required.
Employment Standards
Knowledge of production preferred.
Skill in verbal and written communication, including the ability to follow both verbal and written instructions.
Skilled at working in an ever changing, fast-paced environment.
Skilled in paying attention to detail and problem-solving skills.
Knowledge and demonstration of safety procedures.
Ability to operate machinery and hand tools.
Ability to lift heavy objects (typically up to 50lbs) and stand for long periods.
Ability to understand manufacturing safety protocols.
Ability to pass a pre-employment background check.
Hiring Range
Between $18.00 - $25.25 per hour.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-07-15 07:08:07
-
JOB DESCRIPTION
The QA Technical Service Rep is responsible for the timely delivery of services as they relate to the quality assurance of Tremco's installed roofing systems within their respective region.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Duties/Responsibilities, Core knowledge:
Lead Technician performing roof patch and repair as necessary and determined by the Quality Assurance Group on Tremco Incorporated roof systems (BUR, Modified Bitumen, Single Ply, Fluid Applied, etc.). Estimate material and labor quantities for roof patch and repair. Work with local WTI Field Representatives and/or Supervisors as required or necessary. Provide accurate and timely documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all work-related matters. Demonstrate working knowledge of all services provided. Perform any other duty and/or project as required or assigned by the QA Assurance Group.
Skills, Qualifications, Experience, Special Physical Requirements:
High school diploma or GED Prior roofing experience including patch and repair skills Knowledge and ability to use basic tools associated with commercial roofing Knowledge and experience monitoring and maintaining Quality Control Functional computer skills Safety training and OSHA knowledge with a commitment to safety at all times Understanding and ability to manage expenses Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management Work independently, as well as in a team environment, to solve problems and delegate assignments Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft) and carry basic hand tools, equipment and/or material up to approx.
100 lbs.
over long distances Capable of walking along roof top edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.) Ability to travel out of town including overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write and speak English The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Philadelphia, Pennsylvania
Posted: 2026-07-15 07:08:03
-
Early Finish Fridays + 15% Pension Scheme + 33 Holidays + Private Healthcare + Discounted Gym + Subsidised Dental, Eyecare & Hearing Care Multiple CNC Machinist positions available with a Brighouse based Engineering organisation that design, manufacture and supply critical equipment into a number of quality critical industries, such as Oil & Gas and Power Generation.Due to ongoing increased demand of their services, this employer is now recruiting 2x CNC Machinist positions and looking to grown their skilled engineering team on a permanent basis.For the CNC Machinist position, we are keen to receive applicants from individuals who possess the following:
IDEAL NOT ESSENTIAL: Formal qualifications within a relevant Mechanical Engineering focused subject (Apprenticeship, City & Guilds / NVQ / BTEC Level 3, HNC, HND etc.)
Come with previous experience spent working in a similar position, such as CNC Programmer, Miller, Turner, Setter/Operator etc
The ability to program using machine controls, ideally Mazak but all controls considered - Fanuc, HAAS, Heidenhain, Siemens, ProtoTRAK etc.
Experience working in a low volume machining environment focused on quality critical projects (Aerospace, Oil & Gas, Nuclear, Defence, Power Generation etc.)
Working Hours of the CNC Machinist: Weekly rotational shift pattern, rotating AM & PM shifts:
AM: Monday to Thursday 06:00-13:45 / Friday 06:00-12:25
PM: Monday to Thursday 13:40-21:25 / Friday 12:20-18:45
In return, the CNC Machinist will receive:
Annual Salary: £40,358.00 including shift allowances
Annual Leave: 25 Days + 8 bank holidays + birthday (34 total)
Combined Pension: Up to 15% (10% employer / 5% employee)
Medicash Scheme: Discounted dentist, eyecare, hearing care etc
Death in Service: 5x annual salary
To apply for the CNC Machinist role, please click “Apply Now” and attach a copy of your CV.
Alternatively, please contact Callum Good at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: Up to £40358.00 per annum + 15% Pension + 34 Holidays
Posted: 2026-07-14 16:38:05
-
Bodyshop Controller / Workshop Controller / Workshop Manager Vacancy:
Salary: Negotiable depending on experience
- Monday to Friday 7.30 4.30
- 25 days holiday plus bank holidays
- Pension
- Permanent Vacancy
We have a fantastic opportunity for an experienced Bodyshop Controller to join a dynamic and expanding Accident Repair Centre in Trafford Park
Key Bodyshop Controller Responsibilities:
- Working closely with the Bodyshop productives you will be responsible for ensuring that all body repairs and paintwork meet defined quality procedures.
- Assisting Bodyshop Manager as required
- Covering for Bodyshop Manager in their absence
- Performing repairs to an extremely high standard in Panel Repair/Strip/Refit
- Repairing through to filler stage
- You will also be responsible for overseeing and motivating a team of productive staff as well as working closely with the estimators to ensure that the site is as profitable as possible
As a Bodyshop Controller you will:
- Be working in a similar role as a Bodyshop Workshop Controller or in a supervisory role within a Bodyshop
- At least 3 years experience in Panel Beating
- MET experience
- Level 3 qualification is desirable
If you want to hear more about the Bodyshop Controller role, please send us your CV by clicking apply now or by contacting Richard on 07590309374 / richard@holtautomotive.co.uk to discuss further.
Bodyshop Controller Bodyshop Manchester
Bodyshop Controller / Workshop Controller / Workshop Manager ....Read more...
Type: Permanent Location: Trafford,England
Start: 14/07/2026
Salary / Rate: Negotiable depending on experience
Posted: 2026-07-14 15:58:05
-
Bodyshop Quality Controller
Paying £35,000 - £40,000 dependent on experience
Monday to Friday, 40 hour week
25 days holiday plus bank holidays
I am currently working with a highly efficient and well equipped bodyshop who are now looking for an experienced Quality Controller to join their busy site in the Blackburn area.
Quality Controller / QC job role:
- You will ensure that all jobs are completed in a professional and correct manner and that final quality checks are undertaken in line with BSI0125 or any other applicable standard.
- You will maintain a register of quality defects and be instrumental in ensuring appropriate corrective action is taken to avoid ongoing re-occurrence of such issues.
- Previous experience of working in a busy Bodyshop as a productive is essential.
- You will ideally have held a quality control or supervisory position.
You will work to a high standard and demonstrate a sound up-to-date knowledge of vehicle repair techniques.
Requirements for Quality Controller / QC:
- Have previous experience working as a Quality Controller and be a strong team player with a self-motivation.
- Will work to the highest standard and demonstrate a sound up-to-date knowledge of vehicle repair technique with the ability to work efficiently in a fast-paced accident repair centre.
If you are interested in finding out more get in contact with Richard on 07590309374, email richard@holtautomotive.co.uk or send us your CV by Clicking Apply Now! ....Read more...
Type: Permanent Location: Blackburn,England
Start: 14/07/2026
Salary / Rate: £35000 - £40000 per annum
Posted: 2026-07-14 15:50:10
-
We're partnering with a leading professional services firm to recruit an Internal Audit Manager to join its growing Risk Advisory team in London.
This is an excellent opportunity for an experienced internal audit professional looking to step into a highly visible management role with genuine progression opportunities.
You'll manage a portfolio of clients, lead audit engagements from planning through to reporting, and play a key role in shaping client relationships and delivering high-quality internal audit services across a diverse client base.
As the team continues to grow, there is a strong need for experienced managers who can bridge the gap between senior leadership and audit delivery teams, making this a role with significant long-term development potential.
The Role
You'll take ownership of a portfolio of internal audit clients, ensuring the successful delivery of engagements while providing leadership, coaching and oversight to audit teams.
Key responsibilities include:
Managing internal audit assignments from planning through to final reporting
Developing risk-based audit plans and engagement scopes
Leading client and stakeholder relationships
Reviewing audit testing, findings and reports
Providing governance, risk and controls advisory support
Coordinating and overseeing audit teams delivering fieldwork
Supporting the continued development of team members
Contributing to business growth and client account development
The role is focused on portfolio leadership, stakeholder management and quality assurance rather than hands-on detailed testing.
About You
We're interested in speaking with candidates who have:
Strong Internal Audit experience
Experience managing multiple audit engagements and stakeholders
A proven ability to operate independently and manage client relationships
Strong governance, risk management and internal controls knowledge
Experience leading or mentoring audit teams
Excellent communication and relationship-building skills
We Would Particularly Like To Speak To
Internal Auditors currently operating at Manager level
Assistant Managers or Senior Internal Auditors already performing Manager-level responsibilities
Professionals currently working within a consulting or professional services environment
Internal Auditors who have moved into industry and are interested in returning to practice
Candidates with a blend of Internal Audit, Risk, Governance and Controls experience
Sector Exposure
The client works with organisations across:
Financial Services
Charities and Not-for-Profit
Higher Education
Private Sector organisations
What Makes This Opportunity Different?
Clear progression opportunities following recent promotions within the team
Opportunity to rapidly build and own a client portfolio
Exposure to advisory-led internal audit work
Increasing use of data analytics and AI-enabled audit tools
Diverse client exposure across multiple sectors
Strong emphasis on strategic risk, governance and culture reviews rather than traditional compliance-focused auditing
Working Pattern
Hybrid working model
Approximately 50% of time spent at client sites
Typically around three days per week in the office or on client sites
Travel primarily across London and the South East
Package
£60,000-£67,000 base salary + strong benefits package including car cash allowance.
Excellent career development opportunities
Exposure to a broad and varied client portfolio
If you're an Internal Audit professional looking for a role that combines client leadership, stakeholder management and genuine progression opportunities, we'd love to hear from you. ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £67000 per annum + & Strong benefits package
Posted: 2026-07-14 15:24:58
