-
JOB DESCRIPTION
Under general supervision, the Senior Production Maintenance Technician is responsible for performing repairs, maintenance, and operational activities in support of manufacturing, The PMT helps maintain an inventory of manufacturing equipment, hand tools, molds, fixtures, and gauges, including spare parts.
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Provide maintenance support for all process equipment, which will entail repair of down equipment and the coordination of various maintenance projects.
Analyze, troubleshoot and diagnose equipment, machines, and process related problems. Perform maintenance, fabrication, adjustment, and repairs on all machinery and equipment. Develop and review spare parts lists and inventory, order repair parts and tools, and keep accurate maintenance records utilizing Limble or other PMT programs. Improve preventative maintenance plans including procedures with instructions for operator preventative maintenance.
Perform scheduled preventative maintenance activities.
Install, set up, evaluate and make recommendations regarding new/existing equipment.
Make modifications to equipment to optimize performance.
Coordinate fabrication of fixtures and shop aids.
Ensure that manufacturing systems meet health, safety, and environmental management requirements. Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
High School Diploma or GED required. _____________________________________________________________________________________
Senior Production Maintenance Technician
This is the senior level of the Production Maintenance Technician series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: Advanced understanding of pneumatic /electrical drills, grinders, routers, and motors. Advances understanding of electrical, hydraulic and other systems, general maintenance processes and methods, power tools, welders and machine shop equipment. Provides complex problem-solving skills including equipment breakdown, performing repairs and installation. Provides advanced electrical and instrumentation knowledge and troubleshooting. Able to bring team together to solve complex projects. Work with outside vendors in a professional manner. Ability to train and mentor lower-level PMT's. This level requires the following certifications: LOTO certified, Forklift certified, Fall protection certification Senior Production Maintenance Technician performs broader skilled work and specializes in one trade or craft but performs work in a variety of disciplines.
The Senior Production Maintenance Technician receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
___________________________________________________________________________________
Employment Standards
The requirements listed below are representative of the knowledge, skills, and/or abilities (KSA's) required. Knowledge of Lock Out/Tag Out and PPE. Knowledge of methods, practices, materials, tools, and equipment used in the repair and maintenance of machinery and equipment or the ability to quickly learn processes and to problem solve. Skill in verbal and written communication.
Skill in problem-solving. Skilled at manufacturing shop math skills. Ability to work in confined spaces and wear a silo harness.
Ability to communicate and comprehend in English, both verbal and written.
Hiring Range:
Between $28/hr.
- $31.50/hr.
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through May 1, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-03-14 06:05:36
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant.
The position provides support to leadership for all maintenance staff to drive excellence and maximize effort.
The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation and controls to minimize downtime. Document accurate maintenance activity records.
Clean and maintain assigned areas and tools to ensure proper functionality.
Participate in the continuous improvement process.
Report incidents, near misses, and any non-conformances through the appropriate channels.
Exemplify the expected values of organization including following policies and standard work procedures.
Give input on and coordinate maintenance supply purchases.
Perform Preventative Maintenance Program to ensure completion and accuracy.
Other projects and tasks as assigned.
Crosstrain on other production functions to aid as business need dictates.
EDUCATION REQUIREMENT:
High school diploma required. One-year certificate from college, technical school or manufacturing training program preferred.
EXPERIENCE REQUIREMENT:
One to two years related experience and/or training.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift Licensepreferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Capable of installing, programming, and troubleshooting PLC; AC/DC drive motors preferred.
Ability to troubleshoot electric, air systems, and hydraulic systems. Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit.
Proven problem solver. Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-03-14 06:05:35
-
Dispatch Administrator required to join a Dispatch Processing team responsible for administering the dispatch of finished goods with smooth logistics all incompliance with regulations.
Requirements
Shipping and exporting commercial experience.
Office 365 applications.
SAP
Manufacturing office environment.
Educated with strong numeracy and literacy.
Responsibilities
Organise international transport and shipping.
Maintain accurate documentation systems and support the department with clerical tasks such as updating spreadsheets, data logging, and document retrieval.
Process outgoing shipments to meet production schedules and achieve maximum On Time In Full or OTIF performance.
Ensure all export documentation is compliant and up to date.
Invoice and handle invoice approvals.
SAP reporting.
Action dispatch and packaging procedures. ....Read more...
Type: Permanent Location: Newport, Wales
Start: ASAP
Duration: Permanent
Salary / Rate: £23000 - £31000 Per Annum None
Posted: 2025-03-13 23:35:03
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
This role educates WTI personnel on proper product use and application, provides installation training on and off the roof, and oversees large self-performed projects from start to finish with intermittent inspections and post-completion inspections of smaller projects.
The QCS will perform regular job site visits during the project and after project completion.
The goal is to provide consistency across the country with proper roof repairs and application of our products.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ensure proper execution and delivery of all WTI GS and GC self-performed roofing work. Provide a variety of technical and application training sessions in the field and in a shop setting. Provide hands-on application training and supervision of roof coatings and installation. Attend pre-con's on large projects.
Be present at job start-ups to discuss the proper execution of the scope of work.
Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice.
Perform a pre-final inspection to ensure that the projects have a zero punch list.
Perform final inspections when needed.
Pre-project field inspections and technical support including but not limited to: Peel tests Product recommendations Proper product installations Post-project completion inspection to ensure quality workmanship and proper utilization and application of materials. Product diagnostic support to ensure that WTI is kept out of trouble in misuse of products for the situation. Perform roof inspections with written reports and photo documentation. Perform safety audits while on site to ensure all safety requirements are being met and consult with the safety team when necessary. Communicate professionally with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team. Complete daily reports, including DTAs, safety audits, truck audits, and QC inspection reports, as necessary and applicable. Complete weekly/monthly activity reports as requested. Support the region as needed when the weather conditions do not allow for your normal job responsibilities. Additional tasks as assigned by the manager.
ABILITIES AND SKILLS:
Working knowledge of commercial roofing systems, including built-up, modified, single-ply, and metal. Working knowledge of roof coating systems. Strong roofing or building science mechanical aptitude. Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems). In-depth technical understanding and extensive hands-on knowledge of applications of products.
Intimate knowledge of our product line. Must be able to travel within assigned territory up to 75% of the time with overnight trips included.
OTHER QUALIFICATIONS:
5+ years of roofing, roofing repair, troubleshooting, or field service experience. Prior experience in a field service leadership role. History of working in a field that required autonomy and self-motivation. Prior experience and demonstrates a strong work ethic and ability to multi-task. Must have a valid Driver's License and acceptable Motor Vehicle Record.
The salary range for applicants in this position generally ranges between $72,000 and $90,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Houston, Texas
Posted: 2025-03-13 22:57:53
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better.
Restoring instead of replacing wherever we can is the right thing for our customers
and
our planet, and it's a big part of what makes Tremco Roofing and WTI so unique.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Tremco is looking for a Contractor Support Specialist to support our Southern Atlantic region.
The Contractor Support Specialist is a sales and support role, designed to generate contractor discretionary business in a specific area while providing localized technical support.
The CSS personnel will work directly alongside the contractors, focused on the restoration coatings line, to ensure that Tremco and the contractor are providing the best solutions, the best products and the best installations to our customers.
Duties/Responsibilities, Core knowledge:
* Ensure safe execution and delivery of all roofing services and operations.
* Provide a variety of technical training sessions in the contractor's office and field applications.
* Provide hands on application training and supervision of roof coatings and installation.
* Perform roof inspections reports with written reports on condition analysis, photo documentation, recommendation and material budget estimates.
* Communicate professionally with our customers, Tremco sales representatives and regional sales managers and corporate staff.
* Complete weekly/monthly reports, sales activities, proposals and purchase orders.
* Travel within the assigned territory, complete expense reports on a timely basis.
* Pre-project field inspections and technical support including but not limited to:
* Peel tests
* Product recommendations
* Proper product installation
* Product diagnostic support to ensure the contractor is kept out of trouble in misuse of products for the situation.
* Provide an on-going sales support, training and development to the contractors, per the direction of the local sales reps.
* Be a direct line of contact to the contractors in the designated area, per the local sales reps, to maintain a good working relationship with the existing contractor base, keeping them informed and trained on Tremco s product line and new products introduced.
* Develop new contractors in the area, per the local sales team, by training on product systems and their usage.
Skills, Qualifications, Experience, Special Physical Requirements:
* High School diploma or GED
* Associate s degree (AAS), or Trade School Certification, or Bachelor s Degree (BS) preferred.
* 5+ years of roofing sales or technical experience in the commercial market.
* 2+ years of roofing repair, troubleshooting, or field service experience.
* Working knowledge of commercial roofing systems including built-up, modified, single ply, and metal systems.
* Must have a valid drivers license and acceptable Motor Vehicle record.
* Class B CDL driver s license.
* Strong roofing or building science mechanical aptitude.
* Prior experience in a field sales and service leadership role.
* Practical computer application literacy (including Microsoft Office Suite and learn internal business systems).
* In-depth technical understanding and extensive hands-on knowledge of applications of products.
Intimate knowledge of product line.
* History of working in a field that required autonomy and self-motivation.
* Prior experience that demonstrates a strong work ethic and ability to multi-task.
* Overnight travel of up to 25% to support assigned customer accounts. The salary range for applicants in this position generally ranges between $60,000 and $70,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, Company Pension Plan, Performance Based Commission, and continuing education.Apply for this ad Online! ....Read more...
Type: Permanent Location: Nashville, Tennessee
Posted: 2025-03-13 22:55:56
-
JOB DESCRIPTION
The Company
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Republic Powdered Metals, Inc.; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and Pure Air Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 3,000 people across North America.
Position Summary
The Temporary Operator can work in our Felt Department or in our Roofing Department AT OUR Cleveland Plant.
They start-up, troubleshoot, and operate manufacturing and production equipment safely and routinely while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular union position if the employee completes the probationary period, successfully.
During the probationary period, this position will be on 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on Plant needs.
Duties and Responsibilities
Performs work in a safe manner, according to safety rules and guidelines Communicates with Team Lead and/or Supervisor during shift-changes and throughout shift Understands and operates the HMI at the various stations along the line, to keep the line operating safely and efficiently Monitors weight, speed, and other metrics along the line Operates forklift to move raw materials, load carrier and move finished product Makes raw material batches in the appropriate mixer(s), according to specifications Performs quality control tests on the batches, per established guidelines Ensures proper labels are being used on the taping machine Fills appropriate-sized pails, drums or totes, labels filled-items and places pails/drums on pallet Follows Tremco's Escalation Policy for any safety or quality concerns Performs daily housekeeping/cleaning of immediate area and other surrounding areas, as needed During line down-time, performs housekeeping duties in immediate area, other areas of the plant or assist in other departments Performs other duties, as assigned All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-03-13 22:55:45
-
JOB DESCRIPTION
The Company
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Republic Powdered Metals, Inc.; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and Pure Air Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 3,000 people across North America.
Position Summary
The Temporary Operator can work in our Felt Department or in our Roofing Department AT OUR Cleveland Plant.
They start-up, troubleshoot, and operate manufacturing and production equipment safely and routinely while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular union position if the employee completes the probationary period, successfully.
During the probationary period, this position will be on 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on Plant needs.
Duties and Responsibilities
Performs work in a safe manner, according to safety rules and guidelines Communicates with Team Lead and/or Supervisor during shift-changes and throughout shift Understands and operates the HMI at the various stations along the line, to keep the line operating safely and efficiently Monitors weight, speed, and other metrics along the line Operates forklift to move raw materials, load carrier and move finished product Makes raw material batches in the appropriate mixer(s), according to specifications Performs quality control tests on the batches, per established guidelines Ensures proper labels are being used on the taping machine Fills appropriate-sized pails, drums or totes, labels filled-items and places pails/drums on pallet Follows Tremco's Escalation Policy for any safety or quality concerns Performs daily housekeeping/cleaning of immediate area and other surrounding areas, as needed During line down-time, performs housekeeping duties in immediate area, other areas of the plant or assist in other departments Performs other duties, as assigned All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-03-13 22:55:31
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $20.00 and $33.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Houston, Texas
Posted: 2025-03-13 22:52:14
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
$20-$33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Lexington, Kentucky
Posted: 2025-03-13 22:51:51
-
JOB DESCRIPTION
Main responsibilities:
Maintain oversight of the EHS function at the Corsicana Chemical Manufacturing Plant to ensure EHS compliance and risk are evaluated and managed appropriately. Contribute to the development of new and revision of existing EHS policies, procedures, programs, and processes and verify their deployment throughout.
Partner with Corp EHS and other Manufacturing leadership in the planning, development, and implementation of EHS/risk reduction strategies, initiatives, and programs in alignment with SH&E performance trends, business goals, and regulatory obligations. Identify, establish, and communicate cascading EHS goals for the Corsicana Plant, incorporating the needs of Plant as well as the greater Tremco organization. Facilitate workshops and other activities to improve employee engagement and the overall safety culture of the plant. Provide leadership, mentorship, and guidance on existing and evolving EHS regulatory matters to the EHS team, Site Leadership team and Plant Manager. Assist EHS team and SLT Managers in translating our division's EHS, Process Safety and Security goals into site-specific policies, procedures, and programs. Ensure that the Corsicana Plant implements and sustain effective EHS management systems in accordance with external and internal standards (e.g., Responsible Care, ISO, OHSAS, Energy Services' Integrated Management System, etc.) Interface with federal and local regulatory agencies on behalf of the Corsicana Plant to successfully demonstrate compliance legal, business and customer requirements. Participate as a member of the Corsicana Plant Site Leadership Team (SLT). Monitor the execution of EHS, Process Safety, and Security compliance-related engineering and capital projects at the Corsicana Plant to ensure completion in accordance with deadlines as established with local and federal agencies. Manage EHS compliance tools and processes, both internal and external. Advocate the consistent use of EHS compliance tools and processes throughout the division to report incidents, document incident investigations, and track closure of associated corrective actions in a timely manner. Ensure root cause investigations are conducted for those incidents with the greatest learning potential, lessons learned documents are generated and shared across the network and throughout the company. Audit effectiveness of root cause investigation action items Lead, or apply subject matter expertise in support of, RPM/Tremco EHS goals and objectives as requested. Monitor changes in EHS, Process Safety, and Security laws and regulations, assess the impact of the changes on the organization, and develop guidance documents to satisfy new/modified EHS, Process Safety, and Security requirements.
Minimum Qualifications:
Bachelor's degree in a related area such as Science, Engineering or other technical specialty related to safety, health and environmental practices More than 5 years of practical EHS, Process Safety, and/or Security work experience with increasing responsibility in a chemical production/manufacturing environment Project Management skills Ability to travel Immigration sponsorship not available for this role
Preferred Qualifications:
Certified Safety Professional (CSP) or equivalent Experience in managing teams Green Belt or Black Belt certifications Master's degree in a related area such as Science, Engineering or other technical specialty related to safety, health and environmental practices
Wages: Salary, Exempt, pay dependent on experience and education
This position is bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation/PTO/sick days/parental leave, 401(k), employee stock purchase plan, and pension].
Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-03-13 22:51:50
-
JOB DESCRIPTION
DAP is looking to hire EH&S Specialist for the Pacific, Mo Plant. The EH&S Specialist job functions include but not limited to implementation and maintenance of environment, health, and safety programs at DAP's Facilities Pacific, MO.
Identify, develop and implement plant safety directives in conjunction with Legal, HR and Operations departments.
Assist facilities with; compliance obligations, develop and manage implementation of directives, coordination of worker's compensation objectives, audit and assist in correction of all deficiencies of facilities for adherence to compliance objectives and directives, lead PSM/PHA compliance, assist with facility required inspections and investigations, and travel to assist other facilities will be required.
Responsibilities
Identify and Communicate Compliance ObligationsMonitor regulatory developments in environment/health/safety area for new/revised compliance obligations, areas of potential risk/liability, and advise plant leadership regarding these issues.
Assist with development of health/safety compliance strategies in conjunction with corporate directives.
Develop/distribute plain language health/safety compliance requirement directives to plant mgmt.
in conjunction with the above group.
Network with industry peers, via participation in trade associations and seminars. Act in a Leadership Role with Plant Personnel in Fulfilling Health/Safety Compliance ObligationsProvide direction, review and oversee all safety systems.
Identify, communicate and assist in the development of Best Practices for injury prevention.
Ensure reporting/record-keeping is complete, accurate and timely per OSHA and state agency requirements, insurer's requirements and DAP mandated requirements.
Prepare and/or approve employee training materials on health/safety, conduct training where plant resources are inadequate, or where centralized training responsibility is appropriate. Develop and maintain plant PSM/PHA/RMP activitiesLead the efforts in Process Safety Management (PSM), Process Hazard Analysis (PHA) and Risk Management Plan (RMP) compliance and addressing shortfalls.
Review new, continuous improvement projects for requirements related to PHA/PSM requirements. Ensure Adherence to Safety Compliance Obligations and DirectivesConduct monthly issue review sessions with Corporate EH&S and Plant Managers to assure facility stay in compliance and maintain safety performance objectives. Conduct and Manage Incident Analysis ProgramLead, assist and maintain incident reporting procedures to DAP Corporate and RPM.
Evaluate trends in incidents.
Recommend corrective actions to minimize/eliminate undesirable trends.
Incorporate accident prevention programs into safety directive. Maintain Environmental reporting requirementsKeep accurate records on plant emission calculations to maintain monthly, quarterly, and yearly reporting submission requirements.
Assure plants stay in compliance with required external and internal reporting requirements.
Working knowledge of TRI, Tier II, SPCC and SWPPP is requested.
Requirements:
EHS Degree preferred. Bachelor's degree in environmental health & safety or similar field. 3+ years of relevant experience.
Computer software familiarity. Working knowledge of state and federal regulations. Experience in research skills. Certified Safety Professional preferred
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pacific, Missouri
Posted: 2025-03-13 22:51:29
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: The Fiber Technical Support Specialist plays a crucial role in supporting the marketing, laboratory, and technical aspects of Fiber Reinforced Concrete products at Euclid Chemical.
This office-based position in Cleveland, Ohio, primarily focuses on enhancing the company's North American business, with some involvement in international activities.
The Specialist will collaborate on developing marketing tools, managing project lists, ensuring product compliance, and executing engineering calculations.
This role also includes field support and representation at national tradeshows and conferences, involving occasional travel.
Responsibilities:
Develop and maintain marketing initiatives for concrete fiber products in coordination with the Marketing and Communications Group. Provide technical and engineering support for the Sales and New Business Development (NBD) teams. Assist the Engineering Manager in market development, product compliance, and sales training initiatives. Create and manage project lists and profiles for publication in trade publications, the company website, and other platforms. Identify and develop opportunities for new applications of Euclid fiber products, such as DOT applications, shotcrete, and wall systems. Prepare certifications and literature to ensure project compliance. Review technical documents, literature, and packaging for accuracy. Coordinate product testing programs in collaboration with internal and external laboratories. Assist in developing training programs for customers, internal teams, and trade organizations. Author technical publications and articles relevant to the field. Participate in planning and executing national and regional sales meetings. Monitor industry statistics and trends to inform strategic decisions. Provide monthly updates and actively participate in strategic and business-related meetings.
Education and Experience:
Bachelor's degree in a related field or an equivalent combination of education and experience. Professional Engineer (PE) designation preferred (or actively pursuing). A minimum of 2 years of experience in the cement and concrete field is preferred.
Skills and Qualifications:
Excellent communication skills, with fluency in English. Ability to read, analyze, and interpret scientific and technical journals, financial reports, and legal documents. Proficient in responding to inquiries from customers and regulatory agencies. Skilled in writing articles, speeches, and other publications that adhere to prescribed formats. Capable of presenting information effectively to top management and public groups. Proficient in PC applications, including word processing, spreadsheets, databases, and email systems. Strong aptitude for mathematical concepts, including probability, statistical inference, and geometry. Ability to apply mathematical concepts to practical situations, including fractions, percentages, ratios, and proportions. Strong analytical skills to define problems, collect data, establish facts, and draw valid conclusions. Proficient in interpreting complex technical instructions and managing various abstract and concrete variables.
Travel:
Approximately 10-15% of work time will involve travel.
Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Generous vacation and holiday time
Salary Range: $65,000 - $75,000 annually plus annual company bonus program
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-03-13 22:49:32
-
Embedded Software Developer required to design, implement, and validate software for embedded devices.
Skills
Embedded Software Engineering in C and C++.
Hardware and protocol knowledge ideally of ARM chipsets and SPI, I2C, UART, CAN or USB communications.
Real time operating systems such as Keil RTX, FreeRTOS or ThreadX.
IDEs ideally Keil uVision, Freescale CodeWarrior, STM32cubeIDE or NXP MCUxpresso.
Role
Designing, developing, implementing and testing embedded software systems in C and C++ for ARM Cortex Microcontrollers.
Code for ThreadX and FreeRTOS real time operating systems.
Replicate, debug and resolve any problems. ....Read more...
Type: Permanent Location: Hemel Hempstead, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £70000 Per Annum None
Posted: 2025-03-13 17:36:35
-
Our client, a leading technology company, is seeking a skilled and innovative Embedded Engineer to join their dynamic and agile team.
As an Embedded Engineer, you will play a pivotal role in developing cutting-edge wireless solutions using C/C++ on embedded platforms.
This is an excellent opportunity to showcase your expertise and contribute to the development of groundbreaking embedded prototypes in an agile environment.
Key Responsibilities
Design and develop innovative wireless solutions using C/C++ on embedded platforms.
Collaborate with cross-functional teams to ensure seamless integration of embedded systems.
Work in an agile environment to rapidly prototype and iterate embedded solutions.
Implement and optimize embedded software for wireless communications.
Contribute to the overall architecture and design of embedded systems.
Candidate Requirements
Extensive experience working on embedded systems.
Proficient in C/C++ programming languages.
Solid understanding of bare metal and embedded Linux systems.
Knowledge of digital signal processing (DSP) techniques.
....Read more...
Type: Permanent Location: Portsmouth, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £55000 Per Annum None
Posted: 2025-03-13 17:34:29
-
Real Time Embedded Firmware Engineer require to join an existing team to understand and analyse internal requirements then model, design and develop software architecture, applications and working solutions.
You will work in cross functional teams including software, hardware and user functions owning and where possible automating built in test processes and systems.
Requirements
Experience in developing real time software in C, C++ and Python.
Degree or higher qualification in relevant subject.
GNSS Positioning knowledge of signal generation.
Windows, Linux or other UNIX, Git and Subversion experience.
Driver development, GPU, IQ signal data, RF interface design including FPGA, Microblaze etc.
all highly desirable.
Advanced mathematical skills highly beneficial.
Responsibilities
The design, development and qualification of real time software solutions.
API Design and Development
Digital signal processing algorithm development.
Support product development and planning. ....Read more...
Type: Permanent Location: Paignton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £60000 Per Annum None
Posted: 2025-03-13 17:32:25
-
I have an exciting opportunity for a Firmware Engineer to join young, innovative and global company based in Lincolnshire.
The designs and manufactures ground breaking renewable energy products.
They are currently looking for a Principal Firmware Engineer to join their engineering team.
You will be responsible for creating and implementing quality framework for the firmware team.
Key Skills
Experience Test Driven Development and HiL simulation.
Sprint or Kanban Planning
Cyber security for IoT???s - ETSI 303645.
IoT application layer protocols.
RTOS on embedded systems. ....Read more...
Type: Permanent Location: Grimsby, England
Start: As soon as Possible
Duration: Permanent
Salary / Rate: £55000 - £80000 Per Annum None
Posted: 2025-03-13 17:31:15
-
An excellent opportunity to work as a Lead Software Engineer in a cleantech manufacturing company.
The Lead Software Engineer will join the company???s core software development taking ownership of the software architecture.
It is a clean tech manufacturing company which designs and develops energy storage systems for businesses and homes.
Candidate Requirements
Bachelors in Computer Science Engineering.
Firmware development using C and C++ on ARM or PIC.
Embedded Linux.
Python.
Familiarity with networking concepts such as TCP/IP, VPN, DNS.
A good understanding of communication protocols like I2C, RS422 etc.
Experience in clean tech and data science.
....Read more...
Type: Permanent Location: London, England
Start: As soon as possible
Duration: Permanent
Salary / Rate: £55000 - £80000 Per Annum None
Posted: 2025-03-13 17:30:07
-
I have a fantastic opportunity for a Lead Firmware Engineer to join a young, progressive and innovative company based in Lincolnshire.
The company designs and manufactures renewable energy tech products.
You will be responsible for creating and implementing quality framework for the firmware team, test and deliver innovations, prototypes and concepts.
Candidate requirements
TDD and HiL.
Knowledge and work experience of ETSI 303645 security standard.
IoT application layer protocols.
RTOS.
Renewable Energy Systems.
....Read more...
Type: Permanent Location: Grimsby, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £90000 Per Annum None
Posted: 2025-03-13 17:29:03
-
Firmware Developer required to join a dedicated firmware Research and Development team across the development life cycle for high value, complex wireless controlled rugged robots with advanced and diverse instrumentation.
Skills
Embedded C
Microcontroller programming 8 and 16 bit
Electronics Digital and Analogue
What you will be doing
Battery management and low power system design including motor drivers.
Safe failure mode by design, devices run at significant mechanical strain and harsh environments, including extreme temperatures causing unpredictable failures.
If a tool fails it is essential that the failure is isolated and does not affect any other systems.
Designing and developing elegant solutions for real world problems using innovative design keeping the product suite best in class. ....Read more...
Type: Permanent Location: Dyce, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £33000 - £55000 Per Annum None
Posted: 2025-03-13 17:28:00
-
Join our dynamic team as a Embedded Systems Engineer.
We're looking for a motivated professional with over 2 years of experience in an agile environment.
This role offers the chance to enhance your skills and grow both interpersonally and professionally.
Key Responsibilities:
Develop and test control algorithms and diagnostics applications using MATLAB, Simulink.
Interface with hardware via CAN Hardware to flash software onto microcontrollers/FPGAs.
Utilize Jira, Azure, and Git, Github following best software practices.
Collaborate with cross-functional teams to meet project requirements.
Key skills and qualifications:
Developed Python testing tools and embedded firmware for automotive products
Proficiency in MATLAB/Simulink and Python.
Familiarity with Jira, Azure, Git/Github,
Strong problem-solving skills and ability to work in an agile environment. ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £48000 Per Annum None
Posted: 2025-03-13 17:26:57
-
We are looking for a highly proficient Embedded Systems Engineer.
The selected candidate will be instrumental in developing core application software architecture and introducing new capabilities.
This role offers significant remote work flexibility but also requires some presence at our Yarnton office.
Required Skills
Deep expertise in modern C++ .
Proven experience in designing significant software systems and tackling challenging projects.
Proficiency in STL, Boost, and Python.
Experience with computer vision, sensor fusion, and scientific computing.
Familiarity with OpenGL, Qt or QML, and game engines.
Key Responsibilities
Develop and improve core application software architecture.
Design APIs, protocols, and plugins for integration with internal and external software and hardware systems.
Work on high-performance algorithms and highly parallel real-time processing frameworks.
Develop tools for testing, analysis, and data visualisation.
Research, design, and present new technologies and innovative approaches ....Read more...
Type: Permanent Location: Oxford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum None
Posted: 2025-03-13 17:24:52
-
Embedded Software Test Engineer required to specify, design, develop and use firmware testing tools with a focus on automated testing tools.
You will be part of an existing product testing team taking ownership of automated testing systems maintenance and development working closely with test engineers and developers.
Requirements
Engineering degree or equivalent.
Embedded systems experience C, C++ or Python.
Precise attention to detail and ability to work effectively in a fast-paced environment.
Experience with software testing techniques, both manual and automated.
Exposure to GPS and automotive-based technologies.
Full clean UK driving license.
Responsibilities
Develop and utilise software and firmware testing tools for product testing tasks.
Improve product testing tools and processes.
Take ownership of automated test systems and their continued development.
Create and maintain testing documentation. ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2025-03-13 17:23:47
-
Motion control Embedded Software Engineer required to develop motor control systems, motion sensors and their interfaces.
Skills
Embedded software development including Embedded Linux.
Firmware design and debug, Protocol sniffers, Oscilloscope etc.
Communication protocol knowledge.
Electronic or Electrical Engineering degree.
Role
Programming Embedded C, firmware for microprocessors ARM, STM32 and DSPs.
Type: Permanent Location: Edenbridge, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £52000 Per Annum None
Posted: 2025-03-13 17:22:44
-
Embedded Programmer required to work on the development of state-of-art video display devices.
Key Skills
Embedded systems development.
C++
Device drivers for embedded systems using DMA / interrupt.
Hardware design requirements around embedded processors.
Socket programming
USB, SPI, I2C and other bus interfaces.
Role responsibilities
Develop low level code and middleware for real time hardware.
Design and development of software and systems to specifications and in accordance with ISO9001.
Type: Permanent Location: Dartford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £36000 - £60000 Per Annum None
Posted: 2025-03-13 17:20:41
-
Firmware / Embedded Software Engineer required to design and manage embedded software development for the hardware components of high-performance software and hardware products which interface with hardware and PC applications.
Key Skills
Embedded software in C and C++
FreeRTOS or other RTOS including interrupt handling code and device drivers.
Bluetooth wireless protocol, 802.15.4, and WiFi
ARM-based MCUs and/or MPUs - ARM Cortex M Series (32-bit ARM Cortex-M4F Processor) preferred
Low-level connectivity - UART, SPI, I2C, USB, and SDRAM, JTAG communication protocols
Reading circuit diagrams and data sheets, creating specifications
Software engineering, SDLC, and TDD and unit testing
Degree(s) in Computer science, Embedded systems, Software engineering or a related technical field.
What you will be doing
Design and implement new firmware for custom suite of embedded devices.
Interface with hardware designers and application developers, ensuring seamless integration.
Maintain and expand functionality on our existing products
Design, develop, test, review and debug system software
Design manufacturing test protocols to automatically test hardware during a large scale manufacturing process
This is a fantastic opportunity to join a diverse, practical, well established team working on cutting edge technologies. ....Read more...
Type: Permanent Location: Kidlington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £60000 Per Annum None
Posted: 2025-03-13 17:19:38
