-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Quality Control Specialist educates WTI personnel on the proper use and application of products, providing installation training.
They oversee large self-performed Facade projects from start to finish, conducting intermittent inspections and performing post-completion inspections of smaller projects.
The QCS will conduct regular job site visits during the project and after project completion.
The goal is to provide consistency nationwide through proper repairs and the application of our products.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ensure proper execution and delivery of all WTI GS and GC self-performed facade work (EIFS, Stucco, Concrete Restoration, Caulking).
Provide a variety of technical and application training sessions in both field and shop settings.
Provide hands-on application training and supervision of roof coatings and installation.
Attend pre-cons on large projects.
Be present at job start-ups to discuss the proper execution of the scope of work.
Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice.
Perform a pre-final inspection to ensure that the project has a zero-punch list.
Perform final inspections when needed.
Pre-project field inspections and technical support, including but not limited to:
Peel tests
Product testing
Product recommendations
Proper product installations
Post project completion inspection to ensure quality workmanship and proper utilization and application of materials.
Product diagnostic support to ensure that WTI is kept out of trouble due to misuse of products in the situation.
Conduct roof inspections, providing written reports and photo documentation.
Conduct on-site safety audits to ensure all safety requirements are met and consult with the safety team as needed.
Review and train on large warranty adjustment projects over ten (10) man days.
Communicate professionally both verbally and in writing with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team.
Complete daily reports including DTA's, Safety Audits, Truck Audits, and QC Inspection Reports as necessary and applicable.
Complete weekly/monthly activity reports as requested.
Support the region as needed when weather conditions prevent the fulfillment of daily job responsibilities.
Facilitate training in a classroom setting.
All other Quality Control Inspection-related tasks or training as assigned by the manager.
Travel predominantly within the assigned territory and nationally as needed, and complete and submit expense reports on a timely basis.
EXPERIENCE:
5+ years of facade experience (EIFS, Stucco, Concrete Restoration, Caulking)
Working knowledge Building Envelope Systems
OTHER SKILLS AND ABILITIES:
Strong roofing or building science mechanical aptitude.
Prior experience in a field service leadership role.
Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems)
In-depth technical understanding and extensive hands-on knowledge of the applications of products.
Intimate knowledge of our product line.
This position is an autonomous role and requires self-motivation to manage a high level of independence.
Strong work ethic and ability to multitask.
Experience working with various types of technology and software.
Must have a valid driver's license and a clean driving record.
The salary range for applicants in this position generally ranges between $74,000 and $92,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pensacola, Florida
Posted: 2025-11-20 14:10:22
-
JOB DESCRIPTION
Construction Manager
Benefits:
Base Salary + Annual Bonus
Eligible for overtime
401K
Pension
Health Insurance
Paid time-off
Company Vehicle
GENERAL PURPOSE OF THE JOB:The Construction Manager is responsible for managing all projects (including GC and larger-scale P&R, TremCares, etc.).
This will involve working with the superintendent or technicians assigned to the project to ensure delivery is on time and within budget, as well as selecting and managing all subcontractors.
Additional duties will include participating in all proposals, specifications, price estimates, schedules, and sales efforts as they affect the aforementioned projects.
The Construction Manager is responsible for sales and service support, field resources, and customer management communication as necessary.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for contributing to, validating, and signing off on all proposals and specifications.
Conceptual Phase (estimates & schedules)
Program Planning Phase
Design Phase
Conduct Prebid
Construction Phase
Conduct Pre-construction
Effective Close-out
Cost Estimates and schedules
Use of ebuilder for all project documentation per policy manual.
Accountable for project cost/budget variance & profitability.
Accountable for Quality Assurance.
Understanding of subcontractor agreement and corrective measures of notification to subcontractor per the executed agreement.
Proper letter notification to non-compliant subcontractor agreement articles, i.e., no waivers of lien for lower tier subs, missing submittals, etc.
Set project timelines and goals.
Manage key metrics and report on a regular basis or as required.
Coordinate work with Program Managers, sales and service support, customer management (WTI and Tremco Roofing), and resource management.
Participate in the preventive and corrective action process with responsibility and authority to:
Initiate action to prevent the occurrence of any non-conformity relating to service, process, and quality.
Identify and record any service, process, or quality system problems.
Initiate, recommend, or provide solutions through designated channels.
Verify the implementation of solutions.
Control further processing, delivery, or installation of non-conforming products until the deficiency or unsatisfactory condition has been corrected.
Review all bids received and conduct contractor interviews for specification and contractual compliance.
Approve Proposals for submission (i.e.
pricing, specification, scope).
Direct Project Manager, technicians, and superintendents.
Sign-off on project billings.
Responsible for change order negotiation and approval.
Metrics:
Benchmarks will be assembled for the following metrics:
Concept, Planning & Design (Proposals & Specs):
# Proposals/Specs being managed
# Proposals/Specs reviewed vs.
in queue
#/$ Wins vs.
Losses
Profit Margin of Wins vs.
Losses
Construction (Execution)
# of projects w/in (time &/or $) budget +/- X%
Contractor Management
# Qualified Contractors
$ Billed & Outstanding (& DSOs)
Customer
Project Quality Score
Competencies:
Technical knowledge of all products and services that WTI offers
Deep understanding of all Construction Management tasks
Understanding of superintendent roles & responsibilities
Communications:
Superior written, oral, and digital communication skills
Must have excellent interpersonal skills and a customer service approach when dealing with sales reps
Able to create performance reporting
24-hour reply response to all inquiries
Computer Literacy
Ebuilder, Email, web, SAP, Access, Excel, PowerPoint, Microsoft Projects, Visual Cadd , AutoCadd, others TBD
Specification Development Stage:
Select the WTI Superintendent for the project.
Responsible for specification detail drawings approval.
Signing off on Specifications shall be required by the Division Manager, Construction Manager, and Tremco Sales Rep.
Pre-Bid Stage:
Conducts Pre-Bid Meeting, agenda outlines the required format of the Pre-Bid Meeting.
Document
responses from Pre-Bid Meeting minutes are documented or audio recorded and compiled into meeting minutes on the form
Receives and processes Pre-Bid Meeting Agenda and Sign-In form.
Forwards published copies to local Tremco Rep, Superintendent, Facility Contact, and Roofing Subcontractor.
Bidding Stage:
Publishes, approves, and distributes Addendum (where applicable)
Receives and reviews bids and agreements
Pre-construction Stage:
Provides established Project Schedule
Assists Superintendent in planning and coordinating the Pre-Construction Meeting
Provides superintendent with necessary subcontractor information from Bid Form site-specific safety plans, certificates, etc, prior to the Pre-Construction meeting
Conducts and processes completed Pre-Construction Meeting documentation and distributes to all applicable parties
Construction Stage:
Daily receipt and review of Daily Inspection forms
Visits job site as necessary
Receive and review Weekly Progress Meeting Minutes; attend or be involved via conference call
Maintain the project schedule, and process updates from the superintendent
Perform site audits as appropriate
Authorize and generate Change Orders as required
Authorize subcontractor payments
Authorize Customer billing
Assist the Superintendent with any problems during constructionThe salary range for applicants in this position generally ranges between $79,000 and $99,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-11-20 14:09:55
-
Manage day-to-day marine operations across navigation, mooring, deck equipment, safety equipment, port calls, STS operations, and overall vessel condition.
Oversee safe cargo operations, including loading/discharging, grade changes, and tank preparation.
Work closely with the Technical team to develop drydock specifications and support planning and execution.
Lead and manage all third-party inspections (SIRE, CDI, PSC, USCG, Terminal, Flag).
Conduct Management Inspections and internal audits, ensuring corrective and preventive actions are implemented effectively.
Review and respond to vessel navigational, safety, SIRE/CDI, PSC and internal audit reports, near misses, and incidents.
Liaise with Class, Oil Majors, Owners, Suppliers and other stakeholders to maintain certification and regulatory compliance.
Monitor planned and unplanned repairs to ensure safe and timely completion.
Deliver training to officers and crew; support safety, environmental and security drills onboard.
Conduct officer appraisals and interviews for selection or promotion.
Investigate incidents/accidents when appointed by Fleet Management.
Requirements
Master Mariner (FG) Certificate of Competency.
Sailing experience as Master or Chief Officer on LPG / Ethylene carriers
At least 1 year's recent experience handling Ethylene vessels is essential.
Technically minded and comfortable working in a digital, process-driven environment.
No prior shore-based experience required.
Ability to travel at short notice and operate in a 24/7 duty-rotation environment.
Strong knowledge of international maritime rules, regulations and vessel management standards.
Effective communicator with strong organisation, decision-making and time-management skills.
Fluent in English (written and spoken) and proficient with Microsoft Office.
Navis is acting as an Employment Agency in relation to this vacancy. ....Read more...
Type: Permanent Location: Singapore
Salary / Rate: Medical Insurance, 20 days holiday
Posted: 2025-11-20 13:26:28
-
Field Service Engineer Salary: Starting from £35,000 (DOE)
Location: Dorset
Employment type: Fixed-term contract
If youre a practical Field Service Engineer with a solid electrical or electronic background, this role gives you the chance to support specialist military training systems across key UK sites.
Youll work hands-on with the equipment, keep it running safely, and be the person instructors rely on when training is underway.
What the Field Service Engineer will be doing
- Providing day-to-day technical support for gunnery training systems at Tidworth and Lulworth.
- Assisting instructors and users during training sessions and ensuring the kit is operating safely.
- Travelling to additional UK sites for scheduled maintenance, call-outs, and system checks.
- Completing clear and accurate maintenance reports, service logs, and associated paperwork.
- Working safely, following established procedures, and keeping a tidy approach to the job.
What youll need as a Field Service Engineer
- A recognised electrical/electronic qualification or evidence of being a suitably qualified and experienced engineer.
- Strong electro-mechanical fault-finding skills.
- Confident with Word, Excel, and producing straightforward technical reports.
- A full UK driving licence.
- Ability to obtain Security Clearance (essential).
- Ex-military experience such as Gunner Mechanic, Electrical Mechanic or REME Gun Fitter is useful but not essential.
What the Field Service Engineer gets in return
- Starting salary from £35,000, depending on experience.
- 37.5-hour working week.
- 25 days annual leave.
- Other benefits apply
If youre a Field Service Engineer who takes pride in reliable, steady engineering work with real purpose behind it, this role is well worth a look.
Apply directly or contact Kate Taylor at Holt Engineering
....Read more...
Type: Permanent Location: Weymouth,England
Start: 20/11/2025
Salary / Rate: £35000 - £40000 per annum
Posted: 2025-11-20 13:17:05
-
Im working with a specialist engineering contractor who deliver complex, multi-discipline projects both in the UK and overseas.
Due to continued growth, Im recruiting for an experienced Construction Planner with strong NEC contract experience to support major programmes across structural, civil, architectural and MEP work packages.
This is an excellent opportunity for a Planner who enjoys owning the programme, leading schedule reviews, and working closely with delivery teams to keep projects on track.
If youre looking for a role where your planning expertise genuinely drives project success, this will suit you well.
Youll take the lead on planning activities from bid stage through to delivery, working alongside project managers, commercial teams, design and subcontract partners.
Your focus will be on building robust programmes, supporting decision-making, and ensuring all stakeholders have clear, accurate scheduling information.
Key duties include:
- Developing and managing construction programmes using Primavera P6 or MS Project
- Leading programme meetings with internal teams, clients and subcontractors
- Interpreting drawings and technical information across Architectural, Structural, Civil, MEP and specialist packages
- Tracking progress and preparing clear, concise reports
- Managing procurement schedules and supporting tender handovers
- Identifying risks and recommending mitigation strategies
- Auditing and maintaining programme information to a high standard
- Supporting both live projects and future proposals
To be successful in this role, youll need:
- Strong planning/programme management experience in construction
- Practical knowledge of NEC contracts and compensation events
- Ability to read and convert technical drawings into workable programmes
- Proficiency with Primavera P6, Asta Powerproject or MS Project
- A background in multi-discipline construction environments
- Excellent communication and stakeholder engagement skills
- Degree or Diploma in Civil Engineering / Construction (preferred)
Experience on international or government-backed projects is desirable, but not essential.
Package & Benefits
- Salary from £55,000+ depending on experience
- 37.5-hour working week
- Hybrid working options
- Private medical cover, life insurance and pension
- 25 days holiday
- All UK and overseas travel, accommodation and subsistence fully covered
- Additional wellbeing and salary-sacrifice schemes available
This role is based in Portland, Dorset, with occasional international travel.
How to Apply Interested? Id love to tell you more about this role call Ian Broadhurst on 07734406996 or drop me a message at ian.broadhurst@holtengineering.co.uk. ....Read more...
Type: Permanent Location: Grove,England
Start: 20/11/2025
Salary / Rate: £55000 - £65000 per annum
Posted: 2025-11-20 13:16:04
-
Position: Welder / Fabricator
Job ID: 166/4
Location: Pembroke Dock, Pembrokeshire
Rate/Salary: £18.45p/hour / £38,376 per annum
Benefits: Company pension, holiday allowance, overtime opportunities, career progression
Type: Permanent, Full-Time
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies.
We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Welder / Fabricator
Typically, this person will be responsible for carrying out high-quality fabrication and welding work on marine vessels and associated structures, supporting production, ship repair, refit and new-build projects at Mainstay Marine.
HSB Technical’s client is an established and well-regarded business entity.
Duties and Responsibilities of the Welder / Fabricator:
Fabricate and weld marine structures, components, and assemblies to technical drawings
Carry out MIG, TIG and MMA welding on mild steel, stainless steel, and aluminium where required
Work on vessels in build, refit, and repair stages within the shipyard
Cutting, burning, grinding, forming and fitting steel sections and plate
Assist with pipework fabrication and installation as required
Ensure all work is carried out to shipyard quality standards and in line with safety procedures
Work both in the workshop and onboard vessels in dry dock/afloat
Qualifications and Requirements for the Welder / Fabricator:
Proven experience as a Welder/Fabricator in a marine, shipbuilding, heavy engineering, or fabrication environment
Ability to read and interpret technical drawings and fabrication plans
Proficiency in MIG and MMA welding (TIG advantageous)
Experience working with structural steel, plate, and marine components
Good understanding of shipyard safety procedures and safe working practices
NVQ/City & Guilds in Welding/Fabrication (preferred but not essential)
Flexibility to work overtime when required
Strong teamwork, reliability, and commitment to quality workmanship ....Read more...
Type: Permanent Location: Pembrokeshire, Wales
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £39000 Per Annum
Posted: 2025-11-20 12:44:02
-
A leading ServiceNow partner is expanding its architecture capability and is looking for a strategic and experienced ServiceNow Enterprise Architect to shape large scale digital transformation programmes.
This is a senior, high impact role working directly with C-level stakeholders, helping organisations maximise value from the Now Platform across the enterprise.
The role
You will define the overarching architectural vision and provide end-to-end governance across major ServiceNow implementations.
Youll partner with business leaders to translate strategy into a clear multi-year roadmap, ensure platform alignment, and create design standards that drive consistency, scalability and long-term success.
This is a hands-on strategic role where you will influence direction, challenge assumptions and guide programmes from discovery through to adoption and value realisation.
What you will do
Lead enterprise-level architectural design and roadmap planning across the Now Platform
Align business strategy to ServiceNow capabilities, defining a clear target state architecture
Govern architectural decisions, patterns and standards across multiple teams and workstreams
Partner with senior stakeholders to shape long-term transformation and platform strategy
Guide solution architects and technical teams, ensuring best practice and platform integrity
Oversee integration strategy, data models, CMDB design, automation and cross-platform alignment
Provide thought leadership, innovation and platform optimisation recommendations
Support presales, value discussions and strategic advisory engagements
Ensure solutions meet enterprise security, compliance and architectural principles
What you need
Proven experience operating as a ServiceNow Enterprise Architect or senior cross-platform architect
Deep understanding of the Now Platform across multiple products (ITSM, CSM, ITOM, HRSD, SecOps or others)
Strong background in enterprise architecture frameworks and governance
Ability to design scalable, secure and future-proof ServiceNow architectures
Excellent communication skills with experience engaging C-level stakeholders
Consulting mindset with the ability to drive strategic conversations and influence direction
ServiceNow certifications (CTA, CMA, CIS, CAD) highly desirable
Whats on offer
Excellent salary and benefits
Strategic, high-level ownership and long-term impact
Opportunity to work with enterprise clients and complex global programmes
Career progression into leadership, advisory or platform strategy roles
Support for further certifications and professional development ....Read more...
Type: Permanent Location: Dubai,United Arab Emirates
Start: 20/11/2025
Salary / Rate: AED28000 - AED33000 per month, Benefits: Relocation package, visa sponsorship
Posted: 2025-11-20 12:31:05
-
M365 Engineer
Duration: 3 Months Rate: £500-550p/day
Outside IR35.
Role Overview
A leading construction engineering company seeking an experienced Microsoft 365 Engineer for a short-term contract with a focus on planning and executing migration strategies across Exchange Online, SharePoint Online, OneDrive, and Teams.
This is a hands-on technical role requiring a proactive individual with strong migration experience and a solid understanding of networking fundamentals.
Key responsibilities
Lead and manage office and site infrastructure, aligning with business and IT strategy
Act as a final escalation point for the Service Desk Team
Planning and executing migration strategies across Exchange Online, SharePoint Online, OneDrive, and Teams
Coordinate with third-party MSPs for network and infrastructure management
Support business continuity through proactive incident management
Monitor network health and performance, ensuring high availability and resilience
Maintain inventory and configuration records for infrastructure and software
Excellent communication and documentation abilities
Required skillset.
Proven expertise in O365 tenant-to-tenant migrations
Strong working knowledge of Exchange Online, SharePoint Online, OneDrive, Teams, and Azure AD
PowerShell scripting for automation
Exposure to hybrid Exchange environments
Routing & Switching experience - CCNA certification highly desirable
Understanding of network infrastructure and firewall configurations
Office based (4 days per week initially) - Central London.
Outside IR35.
3 month initial contract.
....Read more...
Type: Contract Location: London, England
Duration: 3 months
Salary / Rate: £500 - £550 per day
Posted: 2025-11-20 11:10:38
-
Job Description:
Our client, a leading FinTech firm, is seeking a highly experienced Lead Product Designer to spearhead design across their international business.
This is a hands-on, end-to-end role with responsibility for both client-facing delivery and internal platform development.
This is a remote position with access to office space in Edinburgh and London on an initial 12-month FTC.
Skills/Experience:
Essential
Product design experience.
Experience in end-to-end product design across UX and UI.
Strong ability to simplify complex information into intuitive interfaces.
Demonstrated experience of leading design processes from discovery through to launch.
Excellent written and verbal communication skills, with confidence presenting to senior stakeholders.
Experienced in collaborating with Engineering, Product, Solution Architecture, business teams and other designers.
Comfortable working within a complex technical environment.
Expertise in Figma and willingness to adopt new tools when required.
Experience managing small teams and overseeing capacity planning.
Ability to influence and advocate for design at executive level.
High attention to detail, curiosity about human behaviour and a drive to learn in a fast-paced environment.
Desirable
Experience designing FinTech or white-label SaaS products.
Exposure to low-code platforms.
Strong understanding of how AI can enhance design processes.
Experience conducting user research.
Experience working with globally distributed teams.
Core Responsibilities:
Evolve the organisation's design strategy, ensuring alignment with business goals and delivery of high-quality solutions.
Shape future design direction in line with changing priorities and global growth objectives.
Act as a custodian of design and user experience across the business, maintaining consistency and excellence across client delivery and platform development.
Own and develop the global design system in collaboration with engineering, ensuring scalability and suitability for a white-label environment.
Lead end-to-end design work across sales assets, client solutions and platform enhancements.
Transform ambiguous ideas and complex requirements into clear and intuitive user experiences.
Manage and mentor a small design team across Europe and Australia.
Oversee capacity planning, workload allocation and team development.
Partner with global stakeholders including product managers, engineers, solution architects, SMEs and senior executives to influence product direction and champion user-centred design.
Support sales efforts by creating design concepts and assets in response to client needs and market demand.
Stay up to date on design trends, emerging tools and innovative technologies including AI.
Advocate for enhancements to improve client solutions, platform capability and internal design processes.
Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy.
Job reference: 16300
To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006.
At Core-Asset, we're committed to protecting and respecting your privacy.
Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure.
We may change this policy from time to time, so please check this policy occasionally to ensure that you're happy with any changes.
By engaging with us (either by applying for a job we're advertising, registering through our website, or getting in touch with our business) you're agreeing to be bound by this policy.
Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users.
For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement
Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland.
INDCAS ....Read more...
Type: Contract Location: City of London, England
Start: ASAP
Duration: 12 Months
Posted: 2025-11-20 11:05:33
-
Job Description:
Our client, a leading FinTech firm, is seeking a highly experienced Lead Product Designer to spearhead design across their international business.
This is a hands-on, end-to-end role with responsibility for both client-facing delivery and internal platform development.
This is a remote position with access to office space in Edinburgh and London on an initial 12-month FTC.
Skills/Experience:
Essential
Product design experience.
Experience in end-to-end product design across UX and UI.
Strong ability to simplify complex information into intuitive interfaces.
Demonstrated experience of leading design processes from discovery through to launch.
Excellent written and verbal communication skills, with confidence presenting to senior stakeholders.
Experienced in collaborating with Engineering, Product, Solution Architecture, business teams and other designers.
Comfortable working within a complex technical environment.
Expertise in Figma and willingness to adopt new tools when required.
Experience managing small teams and overseeing capacity planning.
Ability to influence and advocate for design at executive level.
High attention to detail, curiosity about human behaviour and a drive to learn in a fast-paced environment.
Desirable
Experience designing FinTech or white-label SaaS products.
Exposure to low-code platforms.
Strong understanding of how AI can enhance design processes.
Experience conducting user research.
Experience working with globally distributed teams.
Core Responsibilities:
Evolve the organisation's design strategy, ensuring alignment with business goals and delivery of high-quality solutions.
Shape future design direction in line with changing priorities and global growth objectives.
Act as a custodian of design and user experience across the business, maintaining consistency and excellence across client delivery and platform development.
Own and develop the global design system in collaboration with engineering, ensuring scalability and suitability for a white-label environment.
Lead end-to-end design work across sales assets, client solutions and platform enhancements.
Transform ambiguous ideas and complex requirements into clear and intuitive user experiences.
Manage and mentor a small design team across Europe and Australia.
Oversee capacity planning, workload allocation and team development.
Partner with global stakeholders including product managers, engineers, solution architects, SMEs and senior executives to influence product direction and champion user-centred design.
Support sales efforts by creating design concepts and assets in response to client needs and market demand.
Stay up to date on design trends, emerging tools and innovative technologies including AI.
Advocate for enhancements to improve client solutions, platform capability and internal design processes.
Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy.
Job reference: 16300
To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006.
At Core-Asset, we're committed to protecting and respecting your privacy.
Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure.
We may change this policy from time to time, so please check this policy occasionally to ensure that you're happy with any changes.
By engaging with us (either by applying for a job we're advertising, registering through our website, or getting in touch with our business) you're agreeing to be bound by this policy.
Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users.
For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement
Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland.
INDCAS ....Read more...
Type: Contract Location: Edinburgh, Scotland
Start: ASAP
Duration: 12 Months
Posted: 2025-11-20 11:04:06
-
Do you have a strong electronic test background?
Do you have hands-on engineering experience and an interest in inspection and calibration?
If so, this Norwich based Metrology opportunity could be ideal for you.
As a world leader in professional electronic test tools, our client provides cutting-edge calibration and inspection services to a wide range of industries.
The successful Calibration Engineer - Metrology will be responsible for performing calibration and inspection services on both new and existing products, ensuring compliance with the highest quality standards.
Key Requirements for this Calibration Engineer- Metrology based in Norwich
Strong understanding or experience using electrical and electronic measurement equipment
Keen interest in developing new skills in the calibration of measurement and inspection equipment
Good communication skills and ability to work closely with engineers and customers
With a competitive salary and package, this is a fantastic opportunity to join a successful, growing business offering strong career progression and the chance to develop new technical skills in a supportive team environment.
My Norwich based client is unable to offer a sponsorship, so UK working rights are required.
If you're interested in the Calibration Engineer - Metrology role, please send your CV to KGraveney@redlinegroup.Com or contact Kyle Graveney on 01582 878817 / 07961 158774 for more information. ....Read more...
Type: Permanent Location: Norwich, England
Start: ASAP
Salary / Rate: £35000 - £55000 per annum
Posted: 2025-11-20 09:27:00
-
Senior Production Engineer - Electronic Manufacturing
Our client, a leading electronics manufacturer, is seeking a skilled Senior Production Engineer to take ownership of production processes and drive operational excellence across a growing product range.
This is a hands-on technical role where you'll work closely with R&D, Quality, and Manufacturing teams to ensure products are built, tested, and released to the highest standards.
Key Responsibilities of this Senior Production Engineer - Electronic Manufacturing job:
Lead production engineering activities across electronics manufacturing, ensuring robust, scalable, and efficient processes.
Support product calibration activities and contribute to ongoing development of calibration capability and systems.
Ensure products meet relevant international standards (e.G.
Safety, EMC) and assist with global market compliance activities.
Act as a key interface between R&D and Manufacturing during New Product Introduction (NPI), improving processes, tooling, documentation, and operator training.
Drive continuous improvement to enhance yield, quality, and manufacturability.
Support subcontracting or outsourcing activities where technical or commercial benefits exist.Assist in maintaining ISO9001:2015 compliance and promoting a culture of quality and continuous
improvement.
Candidate Profile required for this Senior Production Engineer - Electronic Manufacturing job:
Degree-qualified in Electronics or Electrical Engineering (or equivalent).
Strong background in electronics manufacturing with hands-on experience in circuit design/modification and production processes.
Understanding of calibration, product compliance, and quality systems (ISO9001, ISO17025, etc.).
Proven track record of delivering process improvements within a manufacturing environment.
Effective communicator comfortable working across multidisciplinary teams.
Practical, proactive, and adaptable — able to balance day-to-day challenges with longer-term engineering initiatives.
This is an excellent opportunity to take on a senior, technically influential role within a growing, technology-focused business.
To apply: Send your CV to NDrain@redlinegroup.Com Or call Nick on 01582 878828 ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: £55000 - £65000 per annum
Posted: 2025-11-20 09:18:14
-
A world leader in design and manufacturing of leading-edge technologies is looking for a Customer Support Quality Lead to be based at their site in East Sussex to join their growing engineering team.
The role of Customer Support Quality Lead will be responsible for ensuring site Quality Management processes and procedures meet the requirements of international standards, customer requirements and company global standards.
The main responsibilities for the role of Customer Support Quality Lead job based in East Sussex are:
-Collaborate with the Technical Support Manager and wider technical support team to deliver a best-in-class customer experience for post-sale quality investigations and non-conformance management.
-Lead regular meetings with Business Line Managers and Customer Care Centres to communicate progress on active investigations.
-Ensure the right tools and systems are in place to provide clear customer support performance metrics and maintain compliance with all customer-level agreements.
-Partner with Business Line Managers and Customer Care Centres to deliver accurate, high-integrity field data for investigations, continually improving the quality of information received by the technical team.
A successful candidate for the Customer Support Quality Lead job based in East Sussex will have the following:
-Process improvement experience
-Quality engineering experience
-Technical product background, ideally electrical
This is a fantastic opportunity for a Customer Support Quality Lead job based in East Sussex to join a global leader offering fantastic career progression opportunities and very competitive salaries.
To apply please send your CV to to Rwilcocks@redlinegroup.Com or for more information contact Ricky Wilcocks on 01582 878810 or 07931788834. ....Read more...
Type: Permanent Location: East Sussex, England
Start: ASAP
Salary / Rate: £40000 - £50000 per annum
Posted: 2025-11-20 09:15:23
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Quality Control Specialist educates WTI personnel on the proper use and application of products, providing installation training both on and off the roof.
They oversee large self-performed projects from start to finish, conducting intermittent inspections and performing post-completion inspections of smaller projects.
The QCS will conduct regular job site visits during the project and after project completion.
The goal is to provide consistency nationwide through proper roof repairs and the application of our products.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ensure proper execution and delivery of all WTI GS and GC self-performed roofing work.
Provide a variety of technical and application training sessions in both field and shop settings.
Provide hands-on application training and supervision of roof coatings and installation.
Attend pre-cons on large projects.
Be present at job start-ups to discuss the proper execution of the scope of work.
Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice.
Perform a pre-final inspection to ensure that the project has a zero-punch list.
Perform final inspections when needed.
Pre-project field inspections and technical support, including but not limited to:
Peel tests
Product testing
Product recommendations
Proper product installations
Post project completion inspection to ensure quality workmanship and proper utilization and application of materials.
Product diagnostic support to ensure that WTI is kept out of trouble due to misuse of products in the situation.
Conduct roof inspections, providing written reports and photo documentation.
Conduct on-site safety audits to ensure all safety requirements are met and consult with the safety team as needed.
Review and train on large warranty adjustment projects over ten (10) man days.
Communicate professionally both verbally and in writing with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team.
Complete daily reports including DTA's, Safety Audits, Truck Audits, and QC Inspection Reports as necessary and applicable.
Complete weekly/monthly activity reports as requested.
Support the region as needed when weather conditions prevent the fulfillment of daily job responsibilities.
Facilitate training in a classroom setting.
All other Quality Control Inspection-related tasks or training as assigned by the manager.
Travel predominantly within the assigned territory and nationally as needed, and complete and submit expense reports on a timely basis.
EXPERIENCE:
5+ years of roofing, roofing repair, troubleshooting, or field service experience.
Working knowledge of commercial roofing systems, including built-up, modified, single ply, and metal.
Working knowledge of roof coating systems.
OTHER SKILLS AND ABILITIES:
Strong roofing or building science mechanical aptitude.
Prior experience in a field service leadership role.
Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems)
In-depth technical understanding and extensive hands-on knowledge of the applications of products.
Intimate knowledge of our product line.
This position is an autonomous role and requires self-motivation to manage a high level of independence.
Strong work ethic and ability to multitask.
Experience working with various types of technology and software.
Must have a valid driver's license and a clean driving record.
The salary range for applicants in this position generally ranges between $74,000 and $92,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pensacola, Florida
Posted: 2025-11-20 06:09:38
-
This Monday to Friday days only role offers real stability, strong job security, and the chance to enjoy your evenings and weekends exactly how you choose, supporting a genuinely healthy work life balance.
You'll benefit from premium overtime opportunities and a market-leading benefits package, including an impressive 20% pension.Based at a fully invested manufacturing site near Winsford, you'll be joining a team that believes in helping people grow.
With accredited training, ongoing upskilling, and clear pathways for progression, this position offers long-term stability, standout benefits, and exceptional earning potential in a supportive environment.What's on offer for you as a Mechanical Maintenance Engineer
Basic Salary: £40,000 - 44,000 + bonus + premium overtime (x1.5, x2)
Training & Development: Commitment to a focused training and development programme, including electrical cross-skilling for those who want it, leadership training and opportunities, specialist hydraulics training, continuous improvement training, etc.
If it helps you progress as an engineer, they will support it where possible
Pension up to 20%
Private healthcare scheme
Prime site location near to the Winsford area with excellent transport links from surrounding areas
Days only Monday to Friday working hours
Role & Responsibilities as a Mechanical Maintenance Engineer
Deliver plant-wide proactive and reactive mechanical maintenance to ensure optimum factory performance
Execute PPM schedules and respond effectively to breakdowns as part of the maintenance team
Fault-find and repair key mechanical systems including hydraulics, pneumatics, conveyors, and gearboxes
Participate in continuous improvement and reliability initiatives to support world-class manufacturing standards
What do you require to apply as a Mechanical Maintenance Engineer
Apprenticeship trained in Mechanical Engineering, Mechatronics, Electrotechnical, Electrical Maintenance or related discipline
City & Guilds Level 3 / BTEC Level 3 (or higher) with NVQ Level 3 in Engineering
Strong background in planned and reactive mechanical maintenance within manufacturing
If this sounds like the kind of balance you're looking for, we'd love to hear from you.
Come join a team where your time and wellbeing truly matter. ....Read more...
Type: Permanent Location: Winsford, England
Start: ASAP
Salary / Rate: £40000.00 - £44000.00 per annum
Posted: 2025-11-19 16:55:36
-
AWS Cloud Engineer - 2nd Line Support (Contract)
Location: 4 days Office based in Central London, 1 day remote
Contract Length: 6 Months
Rate: £250 - £270 per day (Inside IR35)
Start: ASAP
Are you an experienced AWS Cloud Engineer looking for your next contract? We're seeking a talented 2nd Line Support Engineer to join a busy team and play a key role in maintaining, troubleshooting, and optimising in a cloud environment.
What You'll Do
, Provide 2nd line support across AWS cloud infrastructure and associated services
, Troubleshoot incidents, service interruptions, and performance issues
, Support deployments, configuration, and maintenance of cloud resources
, Work closely with 3rd line, DevOps, and architecture teams to resolve complex issues
, Ensure compliance with operational standards, security policies, and best practices
, Maintain technical documentation and contribute to process improvements
Required Skills & Experience
, Strong hands-on AWS experience (EC2, VPC, IAM, S3, CloudWatch, Lambda, etc.)
, Solid knowledge of Linux/Windows administration
, Experience with networking fundamentals (DNS, routing, load balancing, firewalls)
, Familiarity with Terraform, CloudFormation, or similar IaC tools
, Understanding of CI/CD pipelines and modern DevOps workflows
, Proven background in 2nd line/operational support roles
, Excellent communication and problem-solving skills
Nice to Have
, AWS Certifications (Associate or above)
, Experience supporting containerised environments (ECS/EKS/Docker)
, Scripting skills (Python, Bash, PowerShell)
@mecscomms: uniting opportunity with ambition in Telecoms | Media | Technology
@mecscomms is the brand name of MECS Communications Ltd who provide permanent & contract recruitment consultancy service as an Employment Agency & Employment Business.
For more information or a list of current vacancies, please see our web site at mecscomms.co.uk
....Read more...
Type: Contract Location: London, England
Duration: 6 Months
Salary / Rate: £250 - £270 per day
Posted: 2025-11-19 16:45:24
-
SALES AND MARKETING EXECUTIVE (PART TIME)
REMOTE WORKING (20 - 30 HOURS PER WEEK)
£30,000 - £40,000 FTE (Pro-Rata)
THE OPPORTUNITY:
Get Recruited are recruiting on behalf of a intellectual property services firm supporting clients from innovative SMEs to multinational organisations who are looking for a Sales and Marketing Executive to join the team on a part time basis.
The CEO and Sales Manager are looking for someone to elevate the company's digital outreach, build effective lead funnels, and create a predictable, high-quality stream of new business opportunities.
THE ROLE:
This role is ideal for a B2B marketer with hands-on experience generating leads through email campaigns and social channels.
Someone who understands how to design a funnel, measure its performance, refine it, and consistently deliver qualified leads.
Build and optimise multi-channel lead funnels across email, social, and content-based outreach.
Use AI tools, research techniques, and automation workflows to identify and target the right prospects.
Deliver 5 - 6 qualified leads per month into the sales pipeline.
Manage and grow the company's digital presence (LinkedIn and relevant platforms).
Create engaging visual and written content using Adobe CC and Canva.
Develop marketing assets and campaigns that convey credibility to highly technical B2B audiences.
Work closely with the Sales Manager to understand lead quality and refine targeting.
Support inbound enquiry management and ensure swift, professional responses.
THE ROLE:
Have 2 - 4 years in B2B marketing, lead generation, and experience within sales/marketing roles.
You thrive on data, understand how a B2B funnel works, and are confident turning marketing activity into tangible, qualified leads.
Demonstrated success creating lead funnels across email, social (paid or organic), and search/content.
Experience generating consistent, measurable results (e.g., monthly lead targets, marketing contribution to revenue).
Strong skills in: Adobe Creative Cloud, Canva, Mailchimp and Marketing Automation Tools.
Able to communicate clearly and confidently with senior stakeholders.
Comfortable working in a technical or professional services environment.
Organised, analytical, and proactive in managing your own workload and targets.
This is a great opportunity for someone from a Sales and Marketing, Digital Marketing, Marketing Executive, Junior Sales and Marketing, Business Development, Lead Generation or similar role.
By sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website).
Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers.
We are an equal opportunities employer and we never charge candidates a fee for our services. ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: £30000.00 - £40000.00 per annum
Posted: 2025-11-19 15:51:58
-
SALES AND MARKETING EXECUTIVE (PART TIME)
REMOTE WORKING (20 - 30 HOURS PER WEEK)
£30,000 - £40,000 FTE (Pro-Rata)
THE OPPORTUNITY:
Get Recruited are recruiting on behalf of a intellectual property services firm supporting clients from innovative SMEs to multinational organisations who are looking for a Sales and Marketing Executive to join the team on a part time basis.
The CEO and Sales Manager are looking for someone to elevate the company's digital outreach, build effective lead funnels, and create a predictable, high-quality stream of new business opportunities.
THE ROLE:
This role is ideal for a B2B marketer with hands-on experience generating leads through email campaigns and social channels.
Someone who understands how to design a funnel, measure its performance, refine it, and consistently deliver qualified leads.
Build and optimise multi-channel lead funnels across email, social, and content-based outreach.
Use AI tools, research techniques, and automation workflows to identify and target the right prospects.
Deliver 5 - 6 qualified leads per month into the sales pipeline.
Manage and grow the company's digital presence (LinkedIn and relevant platforms).
Create engaging visual and written content using Adobe CC and Canva.
Develop marketing assets and campaigns that convey credibility to highly technical B2B audiences.
Work closely with the Sales Manager to understand lead quality and refine targeting.
Support inbound enquiry management and ensure swift, professional responses.
THE ROLE:
Have 2 - 4 years in B2B marketing, lead generation, and experience within sales/marketing roles.
You thrive on data, understand how a B2B funnel works, and are confident turning marketing activity into tangible, qualified leads.
Demonstrated success creating lead funnels across email, social (paid or organic), and search/content.
Experience generating consistent, measurable results (e.g., monthly lead targets, marketing contribution to revenue).
Strong skills in: Adobe Creative Cloud, Canva, Mailchimp and Marketing Automation Tools.
Able to communicate clearly and confidently with senior stakeholders.
Comfortable working in a technical or professional services environment.
Organised, analytical, and proactive in managing your own workload and targets.
This is a great opportunity for someone from a Sales and Marketing, Digital Marketing, Marketing Executive, Junior Sales and Marketing, Business Development, Lead Generation or similar role.
By sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website).
Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers.
We are an equal opportunities employer and we never charge candidates a fee for our services. ....Read more...
Type: Permanent Location: Manchester, England
Start: ASAP
Salary / Rate: £30000.00 - £40000.00 per annum
Posted: 2025-11-19 15:50:53
-
The Company:
A fantastic opportunity has arisen for a Shipping Planner to work for a market leader in the supply of a wide range of Building Materials.
Internationally renowned with a firm commitment to sustainable development.
Worked on some of the most prestigious construction products in the UK and internationally.
Committed to providing customers with the most reliable and comprehensive array of building materials, through to tailoring customers’ specific needs .Home, Commercial, Construction, Infrastructure, Agricultural, Industrial, and other speciality applications.
Benefits of the Shipper Planner Administrator
Salary £36k
8% - 10% bonus
Hours: Monday – Friday (shift rota start times are: 7.00am,7.30am ,8.00am with the latest finish being 17.00pm
One in five Saturday morning (7.00am – 12.00pm - working from home)
25 Days Holidays plus Bank holidays (increase with length of service)
Pension Scheme
Life Insurance
Training
The Role of shipper / planner
The Shipping Planner will be supporting the companies’ clients on the full process from order through to delivery of Ready-mix.
Manage all programmed orders and services.
Ensure deliveries are dispatched to the customer on time and that any delays are communicated to the customer as soon as possible.
Working on a 3/5-week rota in the office, earliest start time is 7.00am and latest is 5pm and every 3rd/5th Saturday 5 hours working from home.
The Ideal Person for the shipper / planner
Experience with working within a customer service and logistics background ideally construction but not essential.
You will be used to managing a process from orders through to delivery and have experience of working on your own, ideally with heavy side but not essential.
Be a problem solver, ideally have local knowledge.
Good organisational skills.
Team player
Will be confident engaging with clients, dealing with queries and the successfully delivery of Ready Mix / Concrete, forward thinker, self-organised, self-motivated.
If you think the role of Shipper / Planner Administrator is for you, apply now!
Consultant: Amanda Ellis
Email: amandae@otrsales.co.uk
Tel no.
0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: Fulham, Wandsworth, Putney, Battersea, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £36000 - £36000 Per Annum Excellent Benefits
Posted: 2025-11-19 15:37:54
-
JOB DESCRIPTION
The primary function of a Tremco Project & Compatibility Lab Technician is to manage internal testing procedures that are used to establish a compatibility matrix for all Tremco products that are subject to contact in typical construction applications.
The P&C Lab Technician will perform Project Testing and support testing functions for Decks, Below Grade Waterproofing, Sealants and Air Barriers.
These test functions include Product Comparison, Product Compatibly, ASTM Testing (potential addendums to existing standard method requirements).
The P&C Lab Technician will be required to communicate results in an organized manner and manage the flow of data through the proper channels to the proper recipients in a timely fashion
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Laboratory: 75% of time will be spent in the laboratory in constructing test samples, documenting performance and maintaining a clean working environment.
Must be familiar with a laboratory setting and safety and be able to:
Test to ASTM C 1248, ASTM C 1247, ASTM C 1193, ASTM C 1135, ASTM C 1087, ASTM 794, ASTM C 793, ASTM C 719, ASTM C 679, ASTM C 679, ASTM C 661, ASTM C 639 and ASTM C 510 standard test methods.
Prepare test substrates for testing using cutting equipment including band saw, table saw and wet saw.
Document observations and results of standard testing in detailed test reports.
Maintain organization of test articles during sample preparation, conditioning, testing and storage.
Maintain cleanliness of laboratory environment and enforce laboratory hygiene plan.
Use of material testing equipment including microscope and Instron 5565.
Other duties as assigned.
Customer Support (External and Internal): Provide timely response on requests from internal and external customers as it relates to compatibility testing and posting of results in the database.
Develop a test schedule to provide accurate turnaround time estimates.
Maintain quick and accurate written and verbal responses to technical and non-technical questions.
Work with minimal dependence.
Display excellent problem solving & communication skills.
Provide general Technical Service phone support.
Travel on a limited basis to job sites and for product application support training.
Possess a team player attitude.
Be self-motivated and dedicated to quality work.
Other duties as assigned.
EDUCATION & EXPERIENCE
Minimum HS Diploma or GED with 5 years' experience in a laboratory environment OR Bachelor's Degree in Chemistry, Biology, General Science or similar with 3-6 months of work or coursework in a laboratory environment.
OTHER SKILLS AND ABILITIES:
Use of common construction tools such as wet saw, band saw and caulking gun.
Familiar with laboratory safety and general laboratory procedures.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-19 14:11:13
-
JOB DESCRIPTION
The primary function of a Tremco Project & Compatibility Lab Technician is to manage internal testing procedures that are used to establish a compatibility matrix for all Tremco products that are subject to contact in typical construction applications.
The P&C Lab Technician will perform Project Testing and support testing functions for Decks, Below Grade Waterproofing, Sealants and Air Barriers.
These test functions include Product Comparison, Product Compatibly, ASTM Testing (potential addendums to existing standard method requirements).
The P&C Lab Technician will be required to communicate results in an organized manner and manage the flow of data through the proper channels to the proper recipients in a timely fashion
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Laboratory: 75% of time will be spent in the laboratory in constructing test samples, documenting performance and maintaining a clean working environment.
Must be familiar with a laboratory setting and safety and be able to:
Test to ASTM C 1248, ASTM C 1247, ASTM C 1193, ASTM C 1135, ASTM C 1087, ASTM 794, ASTM C 793, ASTM C 719, ASTM C 679, ASTM C 679, ASTM C 661, ASTM C 639 and ASTM C 510 standard test methods.
Prepare test substrates for testing using cutting equipment including band saw, table saw and wet saw.
Document observations and results of standard testing in detailed test reports.
Maintain organization of test articles during sample preparation, conditioning, testing and storage.
Maintain cleanliness of laboratory environment and enforce laboratory hygiene plan.
Use of material testing equipment including microscope and Instron 5565.
Other duties as assigned.
Customer Support (External and Internal): Provide timely response on requests from internal and external customers as it relates to compatibility testing and posting of results in the database.
Develop a test schedule to provide accurate turnaround time estimates.
Maintain quick and accurate written and verbal responses to technical and non-technical questions.
Work with minimal dependence.
Display excellent problem solving & communication skills.
Provide general Technical Service phone support.
Travel on a limited basis to job sites and for product application support training.
Possess a team player attitude.
Be self-motivated and dedicated to quality work.
Other duties as assigned.
EDUCATION & EXPERIENCE
Minimum HS Diploma or GED with 5 years' experience in a laboratory environment OR Bachelor's Degree in Chemistry, Biology, General Science or similar with 3-6 months of work or coursework in a laboratory environment.
OTHER SKILLS AND ABILITIES:
Use of common construction tools such as wet saw, band saw and caulking gun.
Familiar with laboratory safety and general laboratory procedures.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-19 14:10:59
-
Our client is an industry leading construction business with a multimillion-pound turnover and impressive growth plans, supported with large scale investment, and an existing established network of manufacturing facilities across the UK.
Following further growth at their Prudhoe site, our client is now seeking to appoint a HSE coordinator, to help develop integrated management systems related to Health, Safety, Environmental and Quality processes and compliance, embedding and developing ways of working specific to manufacturing operations.
Reporting to the HSE Director, this presents an outstanding opportunity for an experience HSE coordinator or administrator to transfer knowledge and experience from other, or similar industries.
What's in it for you as a HSE Coordinator?
Basic salary of £35,000 per annum
Company wide bonus
Training and career development
Further training and personal development specific to the positions
Days based position - Monday to Friday
Location - Prudhoe
Company Pension
Key Responsibilities Include as HSE Coordinator;
Collaborating with all Business stakeholders to ensure our Safety Health & Environment Strategy is delivered to comply with all relevant legislation at all times
Providing accurate, timely and technical advice to colleagues in resolving issues in H & S and reducing environmental impact
Complete Monthly SHEQ checklist is completed agreeing actions with timescales with relevant personnel and then track actions to completion
Supporting Factory Management Teams on the annual formulation of site specific SHE action plans and supporting and auditing progress to ensure they are delivered, developing SSOWs
The undertaking of COSHH assessments
Completing occupational health monitoring (including near misses and alive and wells)
Maintain Site SHE noticeboards
Assist site management team during internal and external auditing
Essential Qualifications & Experience as HSE Coordinator
IOSH certificate, or NEBOSH General Certificate
Excellent communication skills
Highly organised with exceptional attention to detail
Numerate and literate
Experience of undertaking SHEQ responsibilities within a manufacturing or materials processing environment
An effective collaborator able to influence a wide cross section of people through passion and encouragement to stop and consider safer ways of working
Flexible - Work individual or as part of a team
This positon would suit SHEQ Coordinator, HSE Coordinator or HSEQ Advisor ....Read more...
Type: Permanent Location: Prudhoe, England
Start: ASAP
Salary / Rate: Up to £35000.00 per annum
Posted: 2025-11-19 13:19:35
-
Business Central / Microsoft Dynamics IT Support Engineer Crewe - Hybrid Up To £40,000We are looking for a proactive, technically confident 1st Line Support Engineer with proven experience supporting Microsoft Dynamics Business Central (BC) to join our highly successful, and rapidly expanding client's team.
This is a key role within the IT function, combining BC application support with 1st line IT service desk responsibilities.You will act as the first point of contact for technical queries across the business, ensuring users receive fast, accurate, and high-quality support.
A strong understanding of Business Central and the ability to troubleshoot functional and technical issues is essential.This role would suit someone who thrives in a busy environment, enjoys solving problems, and takes real ownership of their work.
If you are from a 1st Line Support Engineer, Applications Support Agent, IT Support, IT Consultant or similar role with experience on Microsoft Dynamics / Business Central this opportunity is not to be missed.The Role:
Provide 1st line IT support across hardware, software, networks, and cloud services.
Deliver specialist support for Microsoft Dynamics Business Central, including triage, investigation, and resolution of BC-related incidents.
Troubleshoot business application issues, integrations, and user errors within BC and connected systems.
Manage new starter onboarding: account creation, hardware configuration, and access setup.
Assist users with daily system operations, ensuring they understand how to effectively use BC and other core applications.
Administer user permissions across multiple platforms, maintaining strict adherence to the Principle of Least Privilege (PoLP).
Work closely with the IT Manager on infrastructure projects, upgrades, and system improvements.
Escalate complex technical issues to internal teams or external vendors when needed.
Maintain accurate technical documentation, knowledge base articles, and support procedures.
Act as a key liaison for IT suppliers, software providers, and support partners.
Deliver ad-hoc user training, best-practice guidance, and system walkthroughs.
Ensure compliance with IT policies, security standards, and internal processes at all times.
You:
Demonstrated experience supporting Microsoft Dynamics Business Central in a user-facing role.
Strong technical troubleshooting ability with excellent problem-solving skills.
Confident working independently and managing workloads under pressure.
Highly organised with strong prioritisation and multitasking capability.
Excellent communication skills, both written and verbal, with the ability to translate technical language for non-technical users.
Strong attention to detail and a commitment to delivering high-quality service.
Curious, analytical mindset with a desire to continually develop technical knowledge.
By sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website).
Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers.
We are an equal opportunities employer and we never charge candidates a fee for our services. ....Read more...
Type: Permanent Location: Crewe, England
Start: ASAP
Duration: Perm
Salary / Rate: £35000.00 - £40000.00 per annum + Hybrid + Benefits
Posted: 2025-11-19 08:50:46
-
JOB DESCRIPTION
For more information on Tremco CPG, Inc., please go to:
https://tremcocpg.com/
This job is 100% remote - must live in the United States
Business Development, BURmastic/Modified Bitumen (BUR/MB) will drive sales (demand, adoption, and growth) for their assigned market segment and technologies.
Collaboration with key internal stakeholders, building and maintaining essential tools, market positioning, training and education is required.
Business Development, (BUR/MB) will be a thought leader and subject matter expert for current, future and/or related technologies, provide strategic direction, and promote system selling to drive growth.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Review each individual Roofing field sales (annual) business plan.
Be part of 1) each local Roofing field sales team, 2) each Roofing regional sales leadership team, and 3) Roofing field sales training to drive growth via Rule-of-10's and project specific activity.
Act as technical expert for related technologies in assigned area and market segment.
Leverage industry, segment, and/or product knowledge to identify gaps in assigned product line and present opportunities for development and growth.
Provide leadership, creative guidance, and collaborate with multiple cross functional stakeholders on pre-launch needs and post-launch support to enhance selling efforts; including but not limited to testing, certification, warranties, collateral, literature, case studies, and success stories.
Collaborate with Sales on creating and executing plans to increase sales knowledge and drive revenue in assigned market segment and technologies, including but not limited to existing products, new product launches, and newly acquired products to drive sustainable growth and increase market share.
Collaborate with the Learning team on content for our qualified applicator program (QAPs) and general industry training.
Work with local sales representatives to identify target contractors and other stakeholders to drive attendance at technical trainings.
Collaborate with the Marketing Communications team on the development and implementation of marketing campaigns to meet business objectives and generate leads/opportunities/orders.
Work in partnership with Corporate Development and Strategy groups to develop strategy maps and business plans.
Identify and assist in the prioritization of merger and acquisition (M&A) targets based on strategic initiatives and growth priorities.
Drive integration of acquired products into new and established sales initiatives.
Collaborate with Strategy and R&D teams on next generation technology.
Create, implement, maintain, and train on the use of value calculators.
Provide leadership within applicable industry associations and provide trade show support, as appropriate.
Provide regular updates and communication to the business regarding activities, initiatives, outcomes, key performance indicators (KPI's), etc.
Continuously enhance technical knowledge through self-study, industry networks, and research.
EXPERIENCE REQUIREMENT:
Deep knowledge of assigned market segment and technologies
CERTIFICATES, LICENSES, REGISTRATIONS:
Valid driver's license with reliable transportation
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Possesses a deep understanding of the industry, market landscape and trends, competitive activities and customer preferences.
Strong business acumen, especially communication and decision-making skills
Ability to quickly identify and synthesize relevant detail while working with voluminous data
Excellent collaboration skills with the ability to influence cross-functional teams without authority
High level of initiative and a sense of urgency
Excellent interpersonal and presentation skills
Strong problem-solving skills
Ability to travel up to 75% of the time is required
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, climb ladders, reach, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The average base salary for this position starts at $117,000; however, the actual salary will vary and may be above or below the average based on various factors including, but not limited to location, experience level, qualifications, and performance.
In addition to the base salary, this position offers a performance bonus based on the achievement of business goals.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid vacation, 401(k) with company match, pension plan, continuing education, and much more.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-19 06:21:03
-
JOB DESCRIPTION
For more information on Tremco CPG, Inc., please go to:
https://tremcocpg.com/
This job is 100% remote - must live in the United States
Business Development, BURmastic/Modified Bitumen (BUR/MB) will drive sales (demand, adoption, and growth) for their assigned market segment and technologies.
Collaboration with key internal stakeholders, building and maintaining essential tools, market positioning, training and education is required.
Business Development, (BUR/MB) will be a thought leader and subject matter expert for current, future and/or related technologies, provide strategic direction, and promote system selling to drive growth.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Review each individual Roofing field sales (annual) business plan.
Be part of 1) each local Roofing field sales team, 2) each Roofing regional sales leadership team, and 3) Roofing field sales training to drive growth via Rule-of-10's and project specific activity.
Act as technical expert for related technologies in assigned area and market segment.
Leverage industry, segment, and/or product knowledge to identify gaps in assigned product line and present opportunities for development and growth.
Provide leadership, creative guidance, and collaborate with multiple cross functional stakeholders on pre-launch needs and post-launch support to enhance selling efforts; including but not limited to testing, certification, warranties, collateral, literature, case studies, and success stories.
Collaborate with Sales on creating and executing plans to increase sales knowledge and drive revenue in assigned market segment and technologies, including but not limited to existing products, new product launches, and newly acquired products to drive sustainable growth and increase market share.
Collaborate with the Learning team on content for our qualified applicator program (QAPs) and general industry training.
Work with local sales representatives to identify target contractors and other stakeholders to drive attendance at technical trainings.
Collaborate with the Marketing Communications team on the development and implementation of marketing campaigns to meet business objectives and generate leads/opportunities/orders.
Work in partnership with Corporate Development and Strategy groups to develop strategy maps and business plans.
Identify and assist in the prioritization of merger and acquisition (M&A) targets based on strategic initiatives and growth priorities.
Drive integration of acquired products into new and established sales initiatives.
Collaborate with Strategy and R&D teams on next generation technology.
Create, implement, maintain, and train on the use of value calculators.
Provide leadership within applicable industry associations and provide trade show support, as appropriate.
Provide regular updates and communication to the business regarding activities, initiatives, outcomes, key performance indicators (KPI's), etc.
Continuously enhance technical knowledge through self-study, industry networks, and research.
EXPERIENCE REQUIREMENT:
Deep knowledge of assigned market segment and technologies
CERTIFICATES, LICENSES, REGISTRATIONS:
Valid driver's license with reliable transportation
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Possesses a deep understanding of the industry, market landscape and trends, competitive activities and customer preferences.
Strong business acumen, especially communication and decision-making skills
Ability to quickly identify and synthesize relevant detail while working with voluminous data
Excellent collaboration skills with the ability to influence cross-functional teams without authority
High level of initiative and a sense of urgency
Excellent interpersonal and presentation skills
Strong problem-solving skills
Ability to travel up to 75% of the time is required
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, climb ladders, reach, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The average base salary for this position starts at $117,000; however, the actual salary will vary and may be above or below the average based on various factors including, but not limited to location, experience level, qualifications, and performance.
In addition to the base salary, this position offers a performance bonus based on the achievement of business goals.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid vacation, 401(k) with company match, pension plan, continuing education, and much more.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Kansas City, Missouri
Posted: 2025-11-19 06:20:27
