-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Quality Control Specialist educates WTI personnel on the proper use and application of products, providing installation training.
They oversee large self-performed Facade projects from start to finish, conducting intermittent inspections and performing post-completion inspections of smaller projects.
The QCS will conduct regular job site visits during the project and after project completion.
The goal is to provide consistency nationwide through proper repairs and the application of our products.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ensure proper execution and delivery of all WTI GS and GC self-performed facade work (EIFS, Stucco, Concrete Restoration, Caulking).
Provide a variety of technical and application training sessions in both field and shop settings.
Provide hands-on application training and supervision of roof coatings and installation.
Attend pre-cons on large projects.
Be present at job start-ups to discuss the proper execution of the scope of work.
Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice.
Perform a pre-final inspection to ensure that the project has a zero-punch list.
Perform final inspections when needed.
Pre-project field inspections and technical support, including but not limited to:
Peel tests
Product testing
Product recommendations
Proper product installations
Post project completion inspection to ensure quality workmanship and proper utilization and application of materials.
Product diagnostic support to ensure that WTI is kept out of trouble due to misuse of products in the situation.
Conduct roof inspections, providing written reports and photo documentation.
Conduct on-site safety audits to ensure all safety requirements are met and consult with the safety team as needed.
Review and train on large warranty adjustment projects over ten (10) man days.
Communicate professionally both verbally and in writing with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team.
Complete daily reports including DTA's, Safety Audits, Truck Audits, and QC Inspection Reports as necessary and applicable.
Complete weekly/monthly activity reports as requested.
Support the region as needed when weather conditions prevent the fulfillment of daily job responsibilities.
Facilitate training in a classroom setting.
All other Quality Control Inspection-related tasks or training as assigned by the manager.
Travel predominantly within the assigned territory and nationally as needed, and complete and submit expense reports on a timely basis.
EXPERIENCE:
5+ years of facade experience (EIFS, Stucco, Concrete Restoration, Caulking)
Working knowledge Building Envelope Systems
OTHER SKILLS AND ABILITIES:
Strong roofing or building science mechanical aptitude.
Prior experience in a field service leadership role.
Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems)
In-depth technical understanding and extensive hands-on knowledge of the applications of products.
Intimate knowledge of our product line.
This position is an autonomous role and requires self-motivation to manage a high level of independence.
Strong work ethic and ability to multitask.
Experience working with various types of technology and software.
Must have a valid driver's license and a clean driving record.
The salary range for applicants in this position generally ranges between $74,000 and $92,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pensacola, Florida
Posted: 2025-11-20 14:10:24
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Quality Control Specialist educates WTI personnel on the proper use and application of products, providing installation training.
They oversee large self-performed Facade projects from start to finish, conducting intermittent inspections and performing post-completion inspections of smaller projects.
The QCS will conduct regular job site visits during the project and after project completion.
The goal is to provide consistency nationwide through proper repairs and the application of our products.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ensure proper execution and delivery of all WTI GS and GC self-performed facade work (EIFS, Stucco, Concrete Restoration, Caulking).
Provide a variety of technical and application training sessions in both field and shop settings.
Provide hands-on application training and supervision of roof coatings and installation.
Attend pre-cons on large projects.
Be present at job start-ups to discuss the proper execution of the scope of work.
Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice.
Perform a pre-final inspection to ensure that the project has a zero-punch list.
Perform final inspections when needed.
Pre-project field inspections and technical support, including but not limited to:
Peel tests
Product testing
Product recommendations
Proper product installations
Post project completion inspection to ensure quality workmanship and proper utilization and application of materials.
Product diagnostic support to ensure that WTI is kept out of trouble due to misuse of products in the situation.
Conduct roof inspections, providing written reports and photo documentation.
Conduct on-site safety audits to ensure all safety requirements are met and consult with the safety team as needed.
Review and train on large warranty adjustment projects over ten (10) man days.
Communicate professionally both verbally and in writing with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team.
Complete daily reports including DTA's, Safety Audits, Truck Audits, and QC Inspection Reports as necessary and applicable.
Complete weekly/monthly activity reports as requested.
Support the region as needed when weather conditions prevent the fulfillment of daily job responsibilities.
Facilitate training in a classroom setting.
All other Quality Control Inspection-related tasks or training as assigned by the manager.
Travel predominantly within the assigned territory and nationally as needed, and complete and submit expense reports on a timely basis.
EXPERIENCE:
5+ years of facade experience (EIFS, Stucco, Concrete Restoration, Caulking)
Working knowledge Building Envelope Systems
OTHER SKILLS AND ABILITIES:
Strong roofing or building science mechanical aptitude.
Prior experience in a field service leadership role.
Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems)
In-depth technical understanding and extensive hands-on knowledge of the applications of products.
Intimate knowledge of our product line.
This position is an autonomous role and requires self-motivation to manage a high level of independence.
Strong work ethic and ability to multitask.
Experience working with various types of technology and software.
Must have a valid driver's license and a clean driving record.
The salary range for applicants in this position generally ranges between $74,000 and $92,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pensacola, Florida
Posted: 2025-11-20 14:10:22
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Quality Control Specialist educates WTI personnel on the proper use and application of products, providing installation training both on and off the roof.
They oversee large self-performed projects from start to finish, conducting intermittent inspections and performing post-completion inspections of smaller projects.
The QCS will conduct regular job site visits during the project and after project completion.
The goal is to provide consistency nationwide through proper roof repairs and the application of our products.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ensure proper execution and delivery of all WTI GS and GC self-performed roofing work.
Provide a variety of technical and application training sessions in both field and shop settings.
Provide hands-on application training and supervision of roof coatings and installation.
Attend pre-cons on large projects.
Be present at job start-ups to discuss the proper execution of the scope of work.
Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice.
Perform a pre-final inspection to ensure that the project has a zero-punch list.
Perform final inspections when needed.
Pre-project field inspections and technical support, including but not limited to:
Peel tests
Product testing
Product recommendations
Proper product installations
Post project completion inspection to ensure quality workmanship and proper utilization and application of materials.
Product diagnostic support to ensure that WTI is kept out of trouble due to misuse of products in the situation.
Conduct roof inspections, providing written reports and photo documentation.
Conduct on-site safety audits to ensure all safety requirements are met and consult with the safety team as needed.
Review and train on large warranty adjustment projects over ten (10) man days.
Communicate professionally both verbally and in writing with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team.
Complete daily reports including DTA's, Safety Audits, Truck Audits, and QC Inspection Reports as necessary and applicable.
Complete weekly/monthly activity reports as requested.
Support the region as needed when weather conditions prevent the fulfillment of daily job responsibilities.
Facilitate training in a classroom setting.
All other Quality Control Inspection-related tasks or training as assigned by the manager.
Travel predominantly within the assigned territory and nationally as needed, and complete and submit expense reports on a timely basis.
EXPERIENCE:
5+ years of roofing, roofing repair, troubleshooting, or field service experience.
Working knowledge of commercial roofing systems, including built-up, modified, single ply, and metal.
Working knowledge of roof coating systems.
OTHER SKILLS AND ABILITIES:
Strong roofing or building science mechanical aptitude.
Prior experience in a field service leadership role.
Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems)
In-depth technical understanding and extensive hands-on knowledge of the applications of products.
Intimate knowledge of our product line.
This position is an autonomous role and requires self-motivation to manage a high level of independence.
Strong work ethic and ability to multitask.
Experience working with various types of technology and software.
Must have a valid driver's license and a clean driving record.
The salary range for applicants in this position generally ranges between $74,000 and $92,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pensacola, Florida
Posted: 2025-11-20 06:09:38
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resources Supervisor (Supervisor) is responsible for the timely delivery of services, profitability, and all employee management and training within their respective region.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate with the Field Resource Foreman (Foreman) for staffing and scheduling of all WTI Field Resources Reps (Field Reps) in their respective region to ensure proper utilization of manpower on specific jobs for the highest profitability.
Collaborate with other Supervisors as necessary.
Oversee the Quality Control (QC) process in conjunction with the Quality Control Specialist (QCS) of all the Field Reps in the region, which will include random site visits to current and previous job sites and proper documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Ensure profitability within the region by monitoring and managing employee expenses for accuracy and abuse, use of overtime hours, and all full-time personnel's billable time to meet the required percentage.
The Supervisor should stress the profitability factor to all field personnel.
Field all questions and concerns from the Field Reps and handle all discrepancies between the Field Reps and the Sales Reps.
Conduct and foster professional and timely communication (via email, text message, voicemail, or in person) with the customers, Sales Reps, field staff, and internal company personnel on all work-related matters.
Be the primary contact for the office personnel if there are any issues concerning a Field Rep.
Ensure all Field Reps will have a professional appearance and demeanor while completing services for a customer.
Conduct and/or assist with the training (both hands-on field training and classroom setting) for the Field Reps, according to the WTI Training Policy, to include:
Proper completion of all services and related paperwork.
Safety training and training documentation for all Field Reps within the region.
Approval and certification of each Field Rep, including, but not limited to, OSHA Hazard Awareness, Toolbox Talks, etc.
Demonstrate a working knowledge of all services provided.
Manage, monitor, and document the performance of Field Reps and take appropriate steps or corrective measures to resolve employee and work-related issues.
Consult with the Regional Business Manager (RBM) and HR as needed.
Work with the HR and Recruiting department to hire all new personnel.
Ensure all required paperwork is submitted to the corporate office on a timely basis.
Conduct new employee orientation for all new hires, including training on all company policies, administrative processes, procedures, and required technical and safety information.
Handle all administrative matters and corresponding paperwork within the region, including, but not limited to, expense management, monthly sales projections, Field Tech time management, status reports, bidding jobs with Reps, large job sign-offs, project documentation, etc.
Review time reports daily and make necessary corrections with the admin team.
Attend all required calls and meetings.
Perform any other duties and/or projects as required or assigned by the RBM.
CERTIFICATES, LICENSES, REGISTRATIONS:
30-hour OSHA certification (The company will provide it if needed.)
Registered Roof Observer (RRO) is preferred but not required. OTHER SKILLS AND ABILITIES:
Qualifications:
Prior supervisory skills and ability to manage people and tasks.
Prior roofing experience, including patch and repair skills.
Knowledge of Project Management, planning, and scheduling.
Knowledge and experience in monitoring and maintaining quality control.
Functional computer skills.
Safety training and OSHA knowledge.
Understanding of budgeting and expense management.
Competencies:
Adaptable and willing to change with business needs.
Professional and leads by example.
Diversity awareness and ability to adjust to multiple personalities.
Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management.
Work independently, solve problems, and delegate assignments, such as quoting and pricing.
Demonstrate a high degree of accountability and ethical behaviors.
Excellent customer service and ability to build relationships.
Other Requirements:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
The salary range for applicants in this position generally ranges between $72,000 and $90,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2025-11-19 14:10:29
-
JOB DESCRIPTION
Responsible for providing heavy duty cleaning services within the manufacturing plant and warehouse.
Essential Functions
Run floor scrubber and floor buffer as needed.
Empty plant floor trash containers and advise maintenance manager when the trash dumpster is full. Empty all cardboard containers on the plant floor and take cardboard to the recycling dumpster outside the facility. Sweep the plant floor daily removing dust from the plant floor. Assists in cleaning up chemical spills as required.
Follows safety guidelines in doing this task. Monitor supplies of floor cleaner, trash bags, and floor buffer scrubber pads, and makes maintenance manager aware of when these supplies need to be restocked. Reports all spills, leaks, equipment malfunctions, and safety hazards to the production supervisor and/or the maintenance manager.
Minimum Requirements
High School Diploma or equivalent; in lieu of a diploma, a combination of experience and education may be considered.
5 years' Janitor experience in an Industrial Environment.
Preferred Requirements
Forklift Certification Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms. The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. May have occasional exposure to various manufacturing chemicals. This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $16.00/hour and $20.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law. In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2025-11-19 14:10:12
-
JOB DESCRIPTION
Responsible for providing heavy duty cleaning services within the manufacturing plant and warehouse.
Essential Functions
Run floor scrubber and floor buffer as needed.
Empty plant floor trash containers and advise maintenance manager when the trash dumpster is full. Empty all cardboard containers on the plant floor and take cardboard to the recycling dumpster outside the facility. Sweep the plant floor daily removing dust from the plant floor. Assists in cleaning up chemical spills as required.
Follows safety guidelines in doing this task. Monitor supplies of floor cleaner, trash bags, and floor buffer scrubber pads, and makes maintenance manager aware of when these supplies need to be restocked. Reports all spills, leaks, equipment malfunctions, and safety hazards to the production supervisor and/or the maintenance manager.
Minimum Requirements
High School Diploma or equivalent; in lieu of a diploma, a combination of experience and education may be considered.
5 years' Janitor experience in an Industrial Environment.
Preferred Requirements
Forklift Certification Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms. The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. May have occasional exposure to various manufacturing chemicals. This position requires consistent wearing of safety glasses, gloves, long pants, and closed-toe shoes; with additional specific PPE depending on the chemicals or materials handled, which could include respirators, hearing protection, or specialized gloves for hazardous substances.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $16.00/hour and $20.00/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law. In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2025-11-19 14:10:10
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resources Supervisor (Supervisor) is responsible for the timely delivery of services, profitability, and all employee management and training within their respective region.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate with the Field Resource Foreman (Foreman) for staffing and scheduling of all WTI Field Resources Reps (Field Reps) in their respective region to ensure proper utilization of manpower on specific jobs for the highest profitability.
Collaborate with other Supervisors as necessary.
Oversee the Quality Control (QC) process in conjunction with the Quality Control Specialist (QCS) of all the Field Reps in the region, which will include random site visits to current and previous job sites and proper documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Ensure profitability within the region by monitoring and managing employee expenses for accuracy and abuse, use of overtime hours, and all full-time personnel's billable time to meet the required percentage.
The Supervisor should stress the profitability factor to all field personnel.
Field all questions and concerns from the Field Reps and handle all discrepancies between the Field Reps and the Sales Reps.
Conduct and foster professional and timely communication (via email, text message, voicemail, or in person) with the customers, Sales Reps, field staff, and internal company personnel on all work-related matters.
Be the primary contact for the office personnel if there are any issues concerning a Field Rep.
Ensure all Field Reps will have a professional appearance and demeanor while completing services for a customer.
Conduct and/or assist with the training (both hands-on field training and classroom setting) for the Field Reps, according to the WTI Training Policy, to include:
Proper completion of all services and related paperwork.
Safety training and training documentation for all Field Reps within the region.
Approval and certification of each Field Rep, including, but not limited to, OSHA Hazard Awareness, Toolbox Talks, etc.
Demonstrate a working knowledge of all services provided.
Manage, monitor, and document the performance of Field Reps and take appropriate steps or corrective measures to resolve employee and work-related issues.
Consult with the Regional Business Manager (RBM) and HR as needed.
Work with the HR and Recruiting department to hire all new personnel.
Ensure all required paperwork is submitted to the corporate office on a timely basis.
Conduct new employee orientation for all new hires, including training on all company policies, administrative processes, procedures, and required technical and safety information.
Handle all administrative matters and corresponding paperwork within the region, including, but not limited to, expense management, monthly sales projections, Field Tech time management, status reports, bidding jobs with Reps, large job sign-offs, project documentation, etc.
Review time reports daily and make necessary corrections with the admin team.
Attend all required calls and meetings.
Perform any other duties and/or projects as required or assigned by the RBM.
CERTIFICATES, LICENSES, REGISTRATIONS:
30-hour OSHA certification (The company will provide it if needed.)
Registered Roof Observer (RRO) is preferred but not required. OTHER SKILLS AND ABILITIES:
Qualifications:
Prior supervisory skills and ability to manage people and tasks.
Prior roofing experience, including patch and repair skills.
Knowledge of Project Management, planning, and scheduling.
Knowledge and experience in monitoring and maintaining quality control.
Functional computer skills.
Safety training and OSHA knowledge.
Understanding of budgeting and expense management.
Competencies:
Adaptable and willing to change with business needs.
Professional and leads by example.
Diversity awareness and ability to adjust to multiple personalities.
Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management.
Work independently, solve problems, and delegate assignments, such as quoting and pricing.
Demonstrate a high degree of accountability and ethical behaviors.
Excellent customer service and ability to build relationships.
Other Requirements:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
The salary range for applicants in this position generally ranges between $72,000 and $90,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2025-11-19 14:10:10
-
Quality and Compliance Manager - East Midlands, with regional travel
In a year when the UK has been dissecting standards across every public-facing institution, from government ethics inquiries to national infrastructure performance, there's a renewed spotlight on what genuine accountability looks like.
This role belongs to someone who doesn't wait for a regulator, a headline, or a whistle-blower to reveal gaps.
You find them early.
You fix them properly.
And you treat quality not as a reaction to scrutiny, but as a daily act of integrity.
You already operate at a senior level in health or social care quality.
You've stood in rooms where judgement is passed, where evidence matters, and where the difference between “almost compliant” and “truly safe” is a line you never blur.
Your experience across multiple services means you understand the complexity of varied cultures, risk profiles and leadership styles.
You know when to mentor, when to challenge, and when to insist—politely but immovably.
And because you've invested years, not months, in your past roles, your CV shows something this organisation values deeply: commitment.
If your CV reads like a tasting menu of short stays, this won't be your home.
This position demands someone whose impact has been proven over time, not tested in passing.
This is a newly created position within a growing care group.
Quietly successful, multi-award winning, and expanding with intention rather than haste.
The senior team is stable, trusted, and unusually low-turnover by sector standards.
This isn't a business that churns people; it grows them.
You'll be the person who provides the organisation's clearest view of its own quality: Not by sitting above the homes, but by being present around them—digitally, physically, and culturally.
You'll work with managers who want support, not avoidance.
With operations leaders who act when you speak, not when you remind.
And with an executive team that understands the value of an experienced quality professional who can tell them what they must know, not what they want to hear.
You'll shape the systems, the thinking, the culture.
You'll influence outcomes long before inspections arrive. And when needed, you'll step into the registered space with confidence, because you're already operating at that level.
The remuneration recognises the seniority, typically falling in the mid-£50k range, with flexibility for an exceptional career history.
This role is intentionally selective. If the statements below describe you, your experience will be taken seriously:
Minimum five years of quality or compliance in social or health care.
At least one year in a leadership or managerial capacity.
Clear experience working across multiple services or sites.
A history of long, stable tenures, not rapid moves.
Strong grounding in CQC frameworks, regulatory engagement and improvement journeys.
Confident communicator with the authority to influence and the humility to listen.
Based in or near the East Midlands, with the willingness to travel regionally.
If that's you, then this is a role that will recognise the depth of what you've already achieved and the even greater impact you're capable of making.
If it isn't—if your experience isn't rooted in this world, or your tenure history is fragmented—then it's unlikely to move forward here.
Apply in confidence with a CV (even if it is not up to date) or call Tim, the Principal Consultant working closely with this employer.
....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: £50000 - £550000 per annum + Additional benefits
Posted: 2025-11-18 18:25:17
-
Panel Beater Up to £50,000 + Uncapped Bonus + Excellent Benefits (Hereford)
Are you an experienced Panel Beater looking for a stable, long-term career with excellent earning potential? This is an exciting opportunity to join a forward-thinking business that values its people and invests in their future.
Whats on Offer
- Up to £50,000 (dependent on experience)
- Uncapped monthly bonus scheme
- 24 days holiday (plus bank holidays)
- Company pension scheme
- Vehicle leasing scheme
- Employee benefits app with a wide range of discounts and perks
This is more than just a job its the chance to build a career with a company that prides itself on quality, teamwork, and looking after its employees.
The Role Panel Beater
- Carrying out all types of panel repair work to a high standard
- Operation of body alignment jigs
- Panel straightening and filling.
- Replacement of panels
- Welding and bonding of vehicle structure
- Removing and replacing complete body shell
- Working with the body shop team to deliver vehicles back to customers on time
- Ensuring all work meets manufacturer and industry standards
- Using the latest tools and techniques to achieve outstanding results
About You
- ATA qualified Panel Beater (preferred) OR a strong background with proven experience in the role
- Ability to work efficiently and to a high standard in a busy workshop environment
- A great team player with a positive attitude
- Strong attention to detail and commitment to quality workmanship
This is a fantastic opportunity for a skilled Panel Beater who wants to combine long-term stability with excellent rewards and career progression.
If you want to hear more about the Panel Beater role, please send us your CV by clicking apply now or by contacting Richard on 07590309374 / richard@holtautomotive.co.uk to discuss further.
Panel Beater - £55,000 Bodyshop Hereford
Panel Beater, Panel Technician, Bodyshop Manager, Motor Trade, Automotive, Accident Repair centre ....Read more...
Type: Permanent Location: Hereford,England
Start: 18/11/2025
Salary / Rate: £50000 per annum, Benefits: Uncapped Bonus
Posted: 2025-11-18 16:38:07
-
The Company:
Leading manufacture of Breast implants/tissue expanders/testicular implants
Established for over 30 years
Very cash rich
Benefits of the Business Development Manager
£50k-£57k basic salary
£50k OTE (Hitting target will earn you double your salary - Also accelerators for over achieving on target)
Pension
Private healthcare
Company car OR car allowance
Mobile
Laptop
25 days annual leave
The Role of the Business Development Manager
Selling a leading high-quality breast implants and body contouring product portfolio
Selling to both the NHS & private clinics
Dealing with plastic surgeons, reconstructive surgeons, cosmetic surgeons & consultants
Lots of business to go at.
Presentations to doctors, practice staff and nurses in surgeries.
Organizing conferences for doctors and other medical staff.
Building and maintaining positive working relationships with medical staff and supporting administration staff.
Work closely together with Customer Service team on price quotations, tenders, frameworks, pricing, orders samples and customer issues.
Covering the North ideally based on the M62 Corridor
The Ideal Person for the Business Development Manager
MUST HAVE SOLD A PRODUCT INTO THEATRE
Ideally you will have sold breast implants/reconstructive products in the past - contacts with plastic/reconstructive surgeons would be a distinct advantage
Someone who understands how theatres work
Must be well presented.
Open on what medical implantable you have been selling.
Theatre experience (Ability of feeling comfortable in theatres and watching surgeries, theatre access course pass will be required)
Personality of a hunter (the job involves getting new business)
Charismatic networker (relationship-seeker who intentionally make connections with both internal partners and external contacts)
Can demonstrate resilience for rejection.
Understands customer needs regular contact and feedback.
Demonstrates a track record of success.
Takes actions to meet or exceed customer expectations
If you think the role of Business Development Manager is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no.
0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: Manchester, Liverpool, Leed, Bradford, Wigan, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £50000 - £57000 Per Annum Excellent Benefits
Posted: 2025-11-18 14:26:09
-
JOB DESCRIPTION
Summary:
As a Market Manager, you'll be the catalyst for expanding sales, boosting revenue, and increasing profitability within the Water Wastewater market.
This role is all about vision and execution-steering product development, qualification testing, and crafting impactful sales tools.
You'll champion advertising campaigns, tradeshows, technical papers, competitive analysis, and promotions that position us as a market leader.
You'll collaborate closely with Product Line Management, field sales representatives, technical service teams, and sales leadership.
Minimum Requirements:
Bachelor's degree in Business or Marketing (or equivalent experience)
5+ years of marketing or sales experience
5+ years in the Protective Coatings Industry/ Water Wastewater Market
Exceptional communication and presentation skills
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day)
No unusual lifting or exertion requirements
Travel required: 30-40%
Essential Functions:
Drive the sales team to identify what's needed to grow volume, increase profitability, and dominate the market.
Maintain strong two-way communication with field reps to ensure alignment and success.
Achieve annual sales, margin objectives, and new product release goals.
Analyze competitive pressures and testing needs-develop actionable strategies to stay ahead.
Create pricing recommendations that maximize market potential.
Identify top owners and buying accounts to target for growth.
Determine product development needs to counter competitive threats and seize opportunities.
Represent Carboline at tradeshows, industry events, and through technical papers-position us as the market leader.
Drive qualification testing, interpret results, and arm the sales team with winning insights.
Update training materials and support literature on internal and external sites.
Lead advertising and promotional efforts to spotlight new products and their benefits.
Champion Carboline's safety and quality programs.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best." Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2025-11-18 14:10:34
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2025-11-18 14:10:21
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2025-11-18 14:09:58
-
JOB DESCRIPTION
Summary:
As a Market Manager, you'll be the catalyst for expanding sales, boosting revenue, and increasing profitability within the Water Wastewater market.
This role is all about vision and execution-steering product development, qualification testing, and crafting impactful sales tools.
You'll champion advertising campaigns, tradeshows, technical papers, competitive analysis, and promotions that position us as a market leader.
You'll collaborate closely with Product Line Management, field sales representatives, technical service teams, and sales leadership.
Minimum Requirements:
Bachelor's degree in Business or Marketing (or equivalent experience)
5+ years of marketing or sales experience
5+ years in the Protective Coatings Industry/ Water Wastewater Market
Exceptional communication and presentation skills
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day)
No unusual lifting or exertion requirements
Travel required: 30-40%
Essential Functions:
Drive the sales team to identify what's needed to grow volume, increase profitability, and dominate the market.
Maintain strong two-way communication with field reps to ensure alignment and success.
Achieve annual sales, margin objectives, and new product release goals.
Analyze competitive pressures and testing needs-develop actionable strategies to stay ahead.
Create pricing recommendations that maximize market potential.
Identify top owners and buying accounts to target for growth.
Determine product development needs to counter competitive threats and seize opportunities.
Represent Carboline at tradeshows, industry events, and through technical papers-position us as the market leader.
Drive qualification testing, interpret results, and arm the sales team with winning insights.
Update training materials and support literature on internal and external sites.
Lead advertising and promotional efforts to spotlight new products and their benefits.
Champion Carboline's safety and quality programs.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best." Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2025-11-18 14:09:47
-
The Company:
Leading manufacture of Breast implants/tissue expanders/testicular implants
Established for over 30 years
Very cash rich
Benefits of the Business Development Manager
£50k-£57k basic salary
£50k OTE (Hitting target will earn you double your salary - Also accelerators for over achieving on target)
Pension
Private healthcare
Company car OR car allowance
Mobile
Laptop
25 days annual leave
The Role of the Business Development Manager
Selling a leading high-quality breast implants and body contouring product portfolio
Selling to both the NHS & private clinics
Dealing with plastic surgeons, reconstructive surgeons, cosmetic surgeons & consultants
Lots of business to go at.
Presentations to doctors, practice staff and nurses in surgeries.
Organizing conferences for doctors and other medical staff.
Building and maintaining positive working relationships with medical staff and supporting administration staff.
Work closely together with Customer Service team on price quotations, tenders, frameworks, pricing, orders samples and customer issues.
Covering the south ideally based on the M4 Corridor as there will be time when you will need to travel further North
The Ideal Person for the Business Development Manager
MUST HAVE SOLD A PRODUCT INTO THEATRE
Ideally you will have sold breast implants/reconstructive products in the past - contacts with plastic/reconstructive surgeons would be a distinct advantage
Someone who understands how theatres work
Must be well presented.
Open on what medical implantable you have been selling.
Theatre experience (Ability of feeling comfortable in theatres and watching surgeries, theatre access course pass will be required)
Personality of a hunter (the job involves getting new business)
Charismatic networker (relationship-seeker who intentionally make connections with both internal partners and external contacts)
Can demonstrate resilience for rejection.
Understands customer needs regular contact and feedback.
Demonstrates a track record of success.
Takes actions to meet or exceed customer expectations
If you think the role of Business Development Manager is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no.
0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: Reading, Swindon, Woking, Bristol, Crawley, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £50000 - £57000 Per Annum Excellent Benefits
Posted: 2025-11-18 13:43:04
-
A fantastic opportunity has opened for an experienced FPGA Engineer to join a fast-paced, multi-disciplinary engineering team working on innovative cyber and information assurance technologies.
Youll contribute to the design, development, and testing of secure digital solutions used across critical communication and defence environments.
This role offers the chance to work on complex FPGA designs, combining industry-standard and custom interfaces, and to be involved across the full engineering lifecycle, from requirements and architecture through to implementation, verification, and production.
Applicants must have, or be eligible to obtain, UK SC clearance.
What Youll Be Doing As An FPGA Engineer
- Own the FPGA solution from requirements through to development and production
- Lead requirements elicitation and translate them into FPGA implementations
- Define FPGA architecture in collaboration with the wider development team
- Work with the Project Manager to plan, track and deliver against agreed schedules
- Potentially coordinate other FPGA engineers on specific design activities
- Interface with FPGA vendors and third-party IP suppliers
- Develop test benches and perform system-level testing
- Support proposal preparation, estimation activities, and contribute to technical white papers
What Experience Will You Need As An FPGA Engineer
- Proven experience delivering FPGA designs through the full development lifecycle
- Strong VHDL design and verification skills
- Experience optimising designs for performance and power consumption
- Hands-on experience integrating and debugging FPGA solutions in hardware
- Familiarity with configuration management systems
- Experience with Microchip devices and Libero (advantageous)
- Verification experience using ModelSim/QuestaSim (UVM beneficial)
Desirable Experience For The FPGA Engineer
- Requirements management using DOORs
- SmartFusion, IGLOO or PolarFire devices
- PCIe NVMe and FPGA-based implementations
- Xilinx or Altera device/toolchain experience
- Working with third-party IP cores
- Design for security principles
- Embedded firmware (C/C++/assembler)
- Understanding of cryptographic standards and algorithms
- Integration of FPGAs into wider hardware platforms
Why Join
Youll be working with a highly skilled team solving challenging, meaningful engineering problems with real-world impact.
Expect a collaborative culture, complex technical work, and the opportunity to grow your expertise across FPGA, embedded systems and secure digital design.
TT ....Read more...
Type: Permanent Location: Farnborough,England
Start: 18/11/2025
Salary / Rate: Competitive
Posted: 2025-11-18 10:18:04
-
A fantastic opportunity has opened for an experienced FPGA Engineer to join a fast-paced, multi-disciplinary engineering team working on innovative cyber and information assurance technologies.
Youll contribute to the design, development, and testing of secure digital solutions used across critical communication and defence environments.
This role offers the chance to work on complex FPGA designs, combining industry-standard and custom interfaces, and to be involved across the full engineering lifecycle, from requirements and architecture through to implementation, verification, and production.
Applicants must have, or be eligible to obtain, UK SC clearance.
What Youll Be Doing As An FPGA Engineer
- Own the FPGA solution from requirements through to development and production
- Lead requirements elicitation and translate them into FPGA implementations
- Define FPGA architecture in collaboration with the wider development team
- Work with the Project Manager to plan, track and deliver against agreed schedules
- Potentially coordinate other FPGA engineers on specific design activities
- Interface with FPGA vendors and third-party IP suppliers
- Develop test benches and perform system-level testing
- Support proposal preparation, estimation activities, and contribute to technical white papers
What Experience Will You Need As An FPGA Engineer
- Proven experience delivering FPGA designs through the full development lifecycle
- Strong VHDL design and verification skills
- Experience optimising designs for performance and power consumption
- Hands-on experience integrating and debugging FPGA solutions in hardware
- Familiarity with configuration management systems
- Experience with Microchip devices and Libero (advantageous)
- Verification experience using ModelSim/QuestaSim (UVM beneficial)
Desirable Experience For The FPGA Engineer
- Requirements management using DOORs
- SmartFusion, IGLOO or PolarFire devices
- PCIe NVMe and FPGA-based implementations
- Xilinx or Altera device/toolchain experience
- Working with third-party IP cores
- Design for security principles
- Embedded firmware (C/C++/assembler)
- Understanding of cryptographic standards and algorithms
- Integration of FPGAs into wider hardware platforms
Why Join
Youll be working with a highly skilled team solving challenging, meaningful engineering problems with real-world impact.
Expect a collaborative culture, complex technical work, and the opportunity to grow your expertise across FPGA, embedded systems and secure digital design.
TT ....Read more...
Type: Permanent Location: Farnborough,England
Start: 18/11/2025
Salary / Rate: Competitive
Posted: 2025-11-18 10:16:05
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
The foreman also ensures that all technicians complete the Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) is preferred but not required. OTHER SKILLS AND ABILITIES:
Minimum of five years of experience in the roofing industry.
Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Salt Lake City, Utah
Posted: 2025-11-18 06:11:31
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
The foreman also ensures that all technicians complete the Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) is preferred but not required. OTHER SKILLS AND ABILITIES:
Minimum of five years of experience in the roofing industry.
Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Salt Lake City, Utah
Posted: 2025-11-18 06:11:31
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
ASSOCIATE PRODUCT MANAGER
GENERAL PURPOSE OF THE JOB:
The Associate Product Manager plays an active role in the planning, organization, and management of an assigned product or product line(s) from conceptual stages through product life cycles to optimize profit and meet marketing, financial, and corporate growth objectives by performing the following duties under the direct supervision of the Director of Product Management or Sr.
Product Manager.
This critical, hands-on position is integral to the day-to-day tactical operations and strategic growth of the product line and collaborates with a wide variety of functional areas such as sales, engineering, R&D, marketing, manufacturing, and operations to develop and provide product definitions responsive to customer needs and market opportunities.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
MARKET INTELLIGENCE
Responsible (with guidance) for the following:
Conducting customer interviews and surveys
Competitive investigations and analysis
Trade organization participationLIFECYCLE MANAGEMENT
Responsible (with guidance) for the following:
Field and sales supportParticipate in the following:
SKU and product structure management
Forecasting
Market analysis
Reviewing warranty exceptions
Evaluation of testing requirementsNEW PRODUCT DEVELOPMENT
Participate in the following:
Creating product charters
Managing the product development process
Orchestrating product launchesSTRATEGY DEVELOPMENT
Participate in the following:
Product pricing strategies
Prioritizing new product initiatives
Product portfolio pricing strategies
Identifying growth opportunities within product segments
EDUCATION:
Bachelor's Degree in Business, Marketing, Engineering, Science or related field plus three to six months of related experience and/or training such as internships.
EXPERIENCE:
One to two years' related experience and/or training preferred; Product Management intern experience may be a substitute
SKILLS AND ABILITIES:
Ability to grasp technical details
Strong organizational skills
Ability to understand relationships and connections and generate charts, graphs, spreadsheets and written summaries.
Excellent written and oral communication skills
Ability to take direction well
Able to travel
Proficiency in MS Word, MS Excel and MS PowerPoint.
CAD and/or SAP experience is a plus.
Ability to manage multiple priorities, effective team player, self-motivated, quick learner.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-11-17 22:08:29
-
A fantastic opportunity has opened for an experienced Product Assurance Manager to take a leading role across one or more flagship space missions.
This position offers the chance to contribute to both flight hardware and software, as well as ground systems, within a cutting-edge In-Orbit Service, Assembly, and Manufacturing programme.
This role is available at Senior or Principal level depending on experience.
You will be responsible for driving Product and Quality Assurance across complex engineering projects, working closely with project managers, engineering teams, suppliers, and external partners.
Key Responsibilities:
- Lead Product and Quality Assurance activities within project teams
- Provide PA/QA support across multiple programmes
- Coordinate with customer PA/QA representatives when required
- Support supplier and subcontractor assurance activities, including audits and process assessments
- Review materials, parts, and processes against PA and technical requirements
- Produce assurance documentation and lead implementation of project assurance plans
- Witness manufacturing and testing activities, including work conducted at third-party facilities
- Maintain quality control records and related data
- Contribute to the ongoing development and improvement of the organisations Quality Management System
- Support proposal preparation with assurance inputs
- Review work produced by other PA Managers and provide constructive feedback
- Mentor junior team members and delegate tasks as Project PA Lead
- Ensure project work progresses efficiently and in line with programme requirements
Essential Skills & Experience
- 5+ years in Product Assurance and/or Quality Assurance, ideally within the space or aerospace sectors
- Ability to lead functional groups and ensure compliance with assurance requirements
- Strong technical understanding of high-reliability systems
- Logical, practical approach to problem-solving
- Comfortable working independently as well as within multidisciplinary teams
- Excellent organisational and schedule management abilities
- Adaptability to shifting priorities and project changes
- Strong interpersonal skills and confidence in communicating across teams
- Excellent written and verbal communication skills in technical English
Desirable Skills
- Experience working with national space agencies
- QMS Internal Auditor certification or third-party reviewer experience
- Experience in ground segment product assurance
- Experience in software product assurance
Benefits
- Work alongside a highly skilled, diverse, and international team developing innovative space technologies
- Flexible working around core hours
- Optional 9/75 working pattern
- Hybrid working options (role-dependent)
- 25 days holiday (rising annually to a max of 28) + 8 bank holidays
- Life insurance and long-term sick pay
- Private healthcare (taxable benefit)
- Relocation allowance
- Visa sponsorship considered
- Modern office and cleanroom facilities
- Regular team and social events
TT ....Read more...
Type: Permanent Location: Oxfordshire,England
Start: 17/11/2025
Salary / Rate: £70000 - £85000 per annum, Benefits: Hyrbid & flexible working, 9/75 work pattern, private healthcare, & more!
Posted: 2025-11-17 15:49:11
-
Our client is expanding their technology team and is seeking a Lead Full Stack Developer to drive the development of scalable digital products, strengthen engineering capabilities, and support business growth initiatives.
Role and Responsibilities:
Lead a Scrum team of 4-6 developers/testers and foster a collaborative, high-performance work environment.
Serve as the main point of contact for client representatives, ensuring clear communication and timely delivery.
Coordinate with project managers and stakeholders to define project scope, priorities, and timelines.
Ensure the quality, scalability, and timely delivery of software solutions across the full development lifecycle.
Mentor team members and promote best practices in fullstack development, design patterns, and coding standards.
Develop and maintain robust, secure, and performant web applications and APIs.
Research, design, and build proof-of-concepts (PoCs) and implement innovative solutions for system optimization.
Collaborate with partners to enhance tooling, processes, and overall engineering effectiveness.
Maintain project documentation, reporting, and compliance with data privacy and security regulations.
Requirements:
Very good English communication skills.
Consultant mindset with the ability to propose innovations and guide non-technical stakeholders.
Ability to work with US time-zone teams and coordinate across international schedules.
Strong analytical and problem-solving skills.
Excellent communication and interpersonal skills for collaboration with both technical and non-technical stakeholders.
Proactive, results-oriented, with ownership, accountability, and leadership skills.
Technical expertise in .NET Core, C#, React, ASP.NET MVC Core, WebAPI, HTML, CSS, JavaScript, Microservices, Docker, Kubernetes, Entity Framework Core, MS SQL, NoSQL, Redis, MediatR, Azure (AppService, Service Bus, Functions, SQL Database), Visual Studio, Node.js, Dependency Injection, xUnit, OAuth/JWT, and related tools.
Familiarity with design patterns, architectural best practices, security standards (OWASP), and CI/CD pipelines.
For more information - please apply for this job or send your CV directly and we will contact you to provide further details.Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience.
All qualified applicants will receive consideration for employment regardless of gender, race, age, sexual orientation, religion, or belief. ....Read more...
Type: Contract Location: Prague, Czech Republic
Start: ASAP
Duration: 6 Months
Posted: 2025-11-17 14:19:25
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
ASSOCIATE PRODUCT MANAGER
GENERAL PURPOSE OF THE JOB:
The Associate Product Manager plays an active role in the planning, organization, and management of an assigned product or product line(s) from conceptual stages through product life cycles to optimize profit and meet marketing, financial, and corporate growth objectives by performing the following duties under the direct supervision of the Director of Product Management or Sr.
Product Manager.
This critical, hands-on position is integral to the day-to-day tactical operations and strategic growth of the product line and collaborates with a wide variety of functional areas such as sales, engineering, R&D, marketing, manufacturing, and operations to develop and provide product definitions responsive to customer needs and market opportunities.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
MARKET INTELLIGENCE
Responsible (with guidance) for the following:
Conducting customer interviews and surveys
Competitive investigations and analysis
Trade organization participationLIFECYCLE MANAGEMENT
Responsible (with guidance) for the following:
Field and sales supportParticipate in the following:
SKU and product structure management
Forecasting
Market analysis
Reviewing warranty exceptions
Evaluation of testing requirementsNEW PRODUCT DEVELOPMENT
Participate in the following:
Creating product charters
Managing the product development process
Orchestrating product launchesSTRATEGY DEVELOPMENT
Participate in the following:
Product pricing strategies
Prioritizing new product initiatives
Product portfolio pricing strategies
Identifying growth opportunities within product segments
EDUCATION:
Bachelor's Degree in Business, Marketing, Engineering, Science or related field plus three to six months of related experience and/or training such as internships.
EXPERIENCE:
One to two years' related experience and/or training preferred; Product Management intern experience may be a substitute
SKILLS AND ABILITIES:
Ability to grasp technical details
Strong organizational skills
Ability to understand relationships and connections and generate charts, graphs, spreadsheets and written summaries.
Excellent written and oral communication skills
Ability to take direction well
Able to travel
Proficiency in MS Word, MS Excel and MS PowerPoint.
CAD and/or SAP experience is a plus.
Ability to manage multiple priorities, effective team player, self-motivated, quick learner.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-11-17 14:10:06
-
Are you an Engineer with a background in C++?
Are you a Software Engineer looking for a new challenge or to join global multi billion dollar company?
If so I'd like to speak with you!
An exciting opportunity has arisen for a Software Developer - C++ based in Isle of Wight to join a market leading technology organisation.
Due to continued growth they are seeking a Software Developer - C++ in their Isle of Wight office to be responsible for research, design, implementation and testing of software products and solutions.
The Software Developer C++ will directly report to the Software Engineer Manager.
Main responsibilities of the Software Developer C++, based on the Isle of Wight:
Develop easy-to-use web applications
Control automated testing, and manage their deployments
Collaborate with front-end and back-end teams to ensure front-end design integrate with the back-end systems
Writing front-end code
Rewrite front-end web pages
Support in the rewriting of back-end systems
Requirements of the Software Developer C++, based on the Isle of Wight:
Experienced in the following front-end languages:
.
JavaScript, HTML, CSS, JSON, React.Js
Experienced in designing and implement using REST APIs and GraphQL
Proficient in using Selenium, AWS and Azure
Skilled in Linux
Back-end experience in the following:
This is a great opportunity for a Software Developer C++ that has attention to detail, takes pride in their work and wants to do the best for their customers.
This is a great chance for a Software Developer C++ to join a global company who can offer the opportunity for career progression and personal development as well as an excellent benefits package.
To apply for the Software Developer C++ job in Isle of Wight please send your CV to Rwilcocks@redlinegroup.Com or for more information contact on 01582 878810 or 07931788834. ....Read more...
Type: Permanent Location: Isle of Wight, England
Start: ASAP
Salary / Rate: £40000 - £47000 per annum
Posted: 2025-11-17 09:00:41
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: We are seeking a skilled and proactive Color Dispensing Systems Technician to join our team, responsible for ensuring the final assembly, testing, commissioning, and ongoing support of ColorMatic equipment systems.
This role requires a combination of technical expertise, strong communication skills, and hands-on problem-solving abilities.
The position also includes warehouse duties and coordination with cross-functional teams to ensure seamless operations.
Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave Annual company bonus program 401k with company match Defined benefit pension plan Vacation and holiday time
Pay Rate: $25-30 per hour
Major Responsibilities include but are not limited to:
Final assembly & Factory Acceptance Testing of systems prior to deployment.
Remote training dispenser service technicians (DSTs) on field installation, operation, and servicing of systems.
Remote or travel to on-site system pre-commissioning, commissioning, customer training, and startup of ColorMatic equipment.
Fielding & troubleshooting calls via phone & online support.
Ongoing PC Hardware & Software management, troubleshooting, and repair, including software licensing used in the ColorMatic equipment.
Maintain & update system functional specs., documentation, and drawings.
Warehouse Duties: Shop maintenance, shipping, receiving, inventory stocking, and cleaning. Collaborate & Coordinate activities with Euclid Chemical Managers in Ohio & Texas
Education and/or Experience:
High school diploma or GED.
Additional certificate training in the areas of responsibility a plus.
Windows based PCs & Networks knowledge, or experience.
Industrial automation, electrical, and pneumatic knowledge, or experience.
Hand, power, and measuring tools knowledge, or experience.
Mechanical knowledge, or experience.
Ability to read and comprehend written instructions and technical language normally found in equipment manuals.
Physical Requirements:
Ability to perform physical tasks such as sitting, standing, and walking for extended periods. Lifting, carrying, pushing, and pulling objects of various weights. Reaching at various heights, stooping, crouching, kneeling, crawling, and climbing (ladders, ramps, stairs). Frequent use of fine and gross motor skills, including keyboarding and handling tools. Driving and traveling to customer locations as required.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Santa Ana, California
Posted: 2025-11-17 06:08:59
