-
The Power Electronics Engineer is responsible for power supply design and power electronics (power conversion, motor control and motor drive).
Skills
Power Supply Design Experience, ideally to Senior or Principal level
Strong lab experience in debugging complex power modules (hand-on experience)
Familiar with multiple power supply topologies (flyback, half bridge, full bridge,???)
Strong in experience in design for cost, manufacturability, testability and reliability
Experience in firmware development is a big plus (digitalization migration)
Role Responsibilities
Assist in identifying and organizing requirements for power electronics applications.
Apply relevant usability procedures and principles.
In charge of keeping the Product Maturity Tracker (requirement document) updated up to project closure.
Perform necessarily calculation/simulations to validate the design (efficiency calculation, identification of hot spot, estimation of temperature rise, EMC filter sizing, control loop bandwidth verification,???.)
Design magnetics with associated simulation.
Magnetics needs to be outsourced using ???built to print??? manufacturing file methodology (to allow double sourcing)
Build prototypes, products and systems suitable for testing.
Set up and run lab experiments.
Design and implement tests, document results and develop customer presentations.
Provide timely corrective actions on defects.
Release test reports of all prototypes built using the standard Power CPE engineering test platform.
Help develop a power module building block library for high temperature applications.
....Read more...
Type: Permanent Location: Eastington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £85000 Per Annum None
Posted: 2024-11-23 10:59:49
-
IONATE is a deep technology start-up, revolutionising grid-scale power flow control with an innovative hardware-software solution.
Our London team is looking for a Senior Power Electronics Engineer to support our work on game-changing green technology and grow within our world-class team.
Requiring knowledge in power electronics development and design, this position will play a key role in developing and testing power electronics circuits, taking concepts and prototypes through to commercial product for customers.
To apply please go to https://www.ionate.energy/join-us With a focus on hardware development, you will be active in initiating analyses, design reviews, simulations, technical discussions, verification- and validation processes and will have an innovative approach with engineering reasoning.
Importantly, your work will include supporting project and test activities and help to ensure that these are completed within schedule and budget.
What you will do: - Develop power electronics hardware and circuitry for power converters and their applications.
- Implement, test, verify and troubleshoot power electronics systems (power converters, and PWM systems), thermal power electronics design, EMC/EMI mitigation, PCB design and layout optimization, interfacing with distribution transformers, filter design and thermomechanical systems.
- Perform hands-on embedded system hardware design validation and implementation, respecting safety, quality, and international standards.
- Work to clear timescales and collaborate with a cross-functional team to deliver projects on time, with ambitious product targets.
- Actively participate in technical development and testing across a multi-disciplinary team including transformer designers, power electronics designers, control software engineers.
- Create and maintain documentation such as requirements and specification documents, testing reports and product manuals.
What you will need: - Degree in Electrical/Electronics and/or Power Electronics Engineering or equivalent.
- Proven electronics design experience, preferably power converters experience (7+ years) - Experience in electronics circuits design and simulation including HiL and SiL simulations.
- Experience using tools such as SPICE, Altium, MATLAB.
- Good understanding of electronics elements and their principles, integrated circuits IC and high frequency electronic systems.
- Ability to design, create and read PCB schematics.
- Good understanding of signal processing and passive/active filter designs.
- An understanding of best practices related to thermo-mechanical design considerations within the electronics industry.
- Experience of conducting laboratory-based testing using lab test equipment such as oscilloscopes, power analysers, multi-meters etc.
- Experience designing electronic components fit for large scale production.
- Communication skills enabling you to work with multiple departments across the globe.
- A drive to learn new things! It would be useful to have: - Experience in power electronics converters (AC/DC, DC/AC, DC/DC).
- Experience in digital electronics systems applications within the power/utilities industry - Circuit testing and debugging.
- A proven ability to use schematic capture and layout tools.
- Design experience for low noise, mixed signal, and HF systems.
- Soldering and PCB rework.
- Willingness to, at times, travel for testing and commissioning.
Apply here: https://www.ionate.energy/join-us ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £80000 Per Annum None
Posted: 2024-11-23 10:52:34
-
Firmware / Embedded Software Engineer required to design and manage embedded software development for the hardware components of high-performance software and hardware products which interface with hardware and PC applications.
Key Skills:
Embedded software: C and C++
FreeRTOS or other RTOS including interrupt handling code and device drivers.
Bluetooth wireless protocol, 802.15.4, and WiFi
ARM-based MCUs and/or MPUs - ARM Cortex M Series (32-bit ARM Cortex-M4F Processor) preferred
Low-level connectivity - UART, SPI, I2C, USB, and SDRAM, JTAG communication protocols
Reading circuit diagrams and data sheets, creating specifications
Software engineering, SDLC, and TDD and unit testing
Degree(s) in Computer science, Embedded systems, Software engineering or a related technical field.
What you will be doing:
Design and implement new firmware for custom suite of embedded devices.
Interface with hardware designers and application developers, ensuring seamless integration.
Maintain and expand functionality on our existing products
Design, develop, test, review and debug system software
Design manufacturing test protocols to automatically test hardware during a large scale manufacturing process
This is a fantastic opportunity to join a diverse, practical, well established team working on cutting edge technologies. ....Read more...
Type: Permanent Location: Kidlington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £60000 Per Annum None
Posted: 2024-11-23 09:20:19
-
Position: Design Lead - Manufacturing
Location: Cork
Salary: Neg DOE
Design Lead Responsibilities:
Liaise with relevant departments in the company to ensure all designs are achievable and cost effective
Liasing with the client and keeping them up to date on projects
Prepare Drawings using CAD, Revit and BIM Technology
Provide advice on the management of projects and design implications.
Dealing with and responding to emails
Create high-quality detailed technical drawings and plans based on designs supplied by architects and designers and make modifications to existing drawings
Ensure that drawings and designs meet client standards
Ability to work on own initiative and provide innovative solutions to design issues
Provide accurate, detailed and to scale drawings
Ensure drawings are compliant with industry and health and safety standards and protocols
Strong knowledge of materials and engineering principles to check feasibility of manufacture and construction of the product
Present working drawings for use in all stages of the project, tender, manufacture/construction and installation
Produce installation and manufacturing documentation
Maintain accurate records
Design Lead Requirements:
Relevant Qualification
Supervisory experience in a similar role
Experience with BIM is desirable but not essential
Minimum of 5 years experience with production design
Good IT Skills (Data entry)
Team Player Have excellent interpersonal and communication skills.
Have the ability to work on own initiative and as part of a team.
If the position above is of interest to you, submit your CV or call Clodagh 086 0405288 for more information.
CS
....Read more...
Type: Permanent Location: Cork, Republic of Ireland
Start: asap
Posted: 2024-11-22 13:02:23
-
Position: Intermediate/Senior Façade Designer
Location: Dublin South/Hybrid
Salary: Negotiable DOE
Job Summary:
The Facade Designer will work closely with the Technical team and produce drawings to the necessary requirements for each project.
My client offers hybrid work, ongoing training and progression for the right candidate.
Facade Designer Responsibilities:
Review Architect's drawings and propose design solutions.
Assist estimating in providing design solutions at enquiry stage.
Prepare fabrication drawings and cutting lists.
Review programme with Contracts Manager and agree design/procurement programme.
Visit site as required, assisting with contract/site management.
Keep abreast of product and system developments.
Ensure good economical design, encouraging standardisation of details, to achieve best use of available resources.
Prepare approval drawings and achieve approved status.
Prepare material schedules.
Send out purchase requisitions.
Liaise with consultants.
Prepare Design Safety Risk Assessments.
Prepare installation drawings/instructions.
Resolve technical difficulties.
Co-operate with preparation of valuations.
Facade Designer Requirements:
Degree in architecture desirable not essential
3+ years of experience
Portfolio to illustrate previous work
Strong Technical and interpersonal skills
Proficiency in Autodesk AutoCAD and Revit are essential
Technically competent
Planning/scheduling, meeting deadlines
If the position above is of interest to you and you would like to know more, please call us today 00353 86 0405288 in complete confidence.
CS ....Read more...
Type: Permanent Location: Dublin South, Republic of Ireland
Start: ASAP
Posted: 2024-11-22 13:00:07
-
A fantastic new job opportunity for an Embedded Software Engineer - C has just become available, to join a leading R&D company based in Leicester.
This new opportunity will be responsible for supporting new product development, in all areas of embedded software, throughout all stages of the product development life cycle.
This will suit an ambitious and self-driven engineer, with a proactive approach to their work.
Key skills/experience required of the Embedded Software Engineer - C, based in Leicester include:
BEng or BSc degree in Computer Science, Engineering or relevant field.
Proven work experience as an Engineer (Firmware, Embedded Software or Electronics).
Proficient in Embedded C/C++.
Some experience in schematic design (Preferably Altium Designer).
Experience with designing software and/or hardware to IEC61508 Functional Safety standards.
(Preferable).
Experience with the internet of things (IOT and/or Industrial IOT).
Familiarity with serial protocols such as UART, SPI, I2C, CAN, Ethernet, Ethernet IP etc.
Experience with hazardous area standards such as IECEx Intrinsic Safety (IEC 60079-11) is desirable, not essential.
To apply for this fantastic Embedded Software Engineer - C, based in Leicester, please email SKhuttan@redlinegroup.Com quoting SKK1154.
For more information please call Sophie on 01582 878817 or 07961158586. ....Read more...
Type: Permanent Location: Leicester, England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2024-11-22 12:30:22
-
Position: Facade Designer
Location: Hampshire
Salary: Neg DOE
The Job:
The Facade Designer will work closely with the Technical team and produce drawings to the necessary requirements for each project, must be experienced in rainscreen.
Once settled into the role there may be a Hybrid opportunity
Facade Designer Responsibilities:
Review Architect's drawings and propose design solutions.
Assist estimating in providing design solutions at enquiry stage.
Prepare fabrication drawings and cutting lists.
Review programme with Contracts Manager and agree design / procurement programme.
Visit site as required, assisting with contract / site management.
Keep abreast of product and system developments.
Ensure good economical design, encouraging standardisation of details, to achieve best use of available resources.
Prepare approval drawings and achieve approved status.
Prepare material schedules.
Send out purchase requisitions.
Liaise with consultants.
Prepare Design Safety Risk Assessments.
Prepare installation drawings / instructions.
Resolve technical difficulties.
Co-operate with preparation of valuations.
Facade Designer Requirements:
Minimum of 2 - 4 years of experience
Must have Rainscreen experience
Portfolio to illustrate previous work
Strong Technical and interpersonal skills
Proficiency in Autodesk AutoCAD and Revit are essential
Technically competent
Planning/scheduling, meeting deadlines
Monitoring and supervision of junior staff
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship's already in place.
Therefore, we are unable to consider candidates who do not have full authorisation to work in the UK.
Applications submitted without the necessary visa in place will not be considered.
....Read more...
Type: Permanent Location: Hampshire, England
Start: asap
Posted: 2024-11-22 11:27:30
-
Role: Architectural/Fire Engineer
Location: Cork
Salary: Negotiable DOE
Our client are recruiting for an Architect/Engineer with Fire Engineering expertise to provide fire strategy compliance input to country-wide projects for which company provide fire engineering services.
Fire Strategy compliance input is required at all stages of project realisation - including feasibility studies, long-range planning studies, permitting and full design services including programming, design development, construction documents, and services during construction for design/bid/build and design/build projects.
The successful candidate will be a conscientious, self-motivated professional with strong communication skills.
They will exhibit a passion and desire to apply their technical experience and knowledge in a team environment on technically challenging and professionally rewarding projects.
Our team is seeking a person who understands the importance of meeting their targeted commitments while being flexible to the ever-changing and fast paced environment of our clients' sites and willing to develop within a dynamic
Key responsibilities:
Developing fire strategies for a wide range of projects, using the relevant code recommendations such as TGD Part B & M, BS9999, BS 5588 as well as pertinent FM and NFPA standards.
Preparation and lodgement of Fire Safety Certificates and Disabled Access Certificate applications via the Building Control Management System (BCMS).
Provide internal FSC and DAC consultancy service for design and contract administration teams on building regulation matters.
Lead fire strategy discussions with design team, client representatives, building control and fire service.
Understand and Implementation of Insurer requirements with regards to reduction in property damage and business interruption risk.
Support BCAR Compliance and preparation of fire inspection reports during construction.
Supervise and train graduates on fire engineering principles and practises.
Perform quality review checks for deliverables.
Participate in design reviews, risk assessments and vendor bid evaluations.
Assist in the generation of proposals, scopes, schedules and budgets for projects.
Develop designer effort-hour estimates for Architectural/Permitting discipline.
Display strong communication and interpersonal skills and have the ability to work in a fast-paced team environment with multiple deadlines.
Proactive Architect with experience in all stages of project delivery (schematic design, site master planning, design development, construction
An understanding of local permitting legislation, building regulations, and health and safety legislation
Here's what you'll need
Qualified Architect/Architectural Technologist, 5+ years' experience, with fire safety & disabled access certification background.
A postgraduate/bachelor's degree in fire engineering preferable.
Strong understanding in fire safety engineering and a desire to develop their career further in this field.
Familiar with relevant codes and standards: Part B & M, BS 9999, BS 5588, etc.
Proficient in Microsoft suite (Excel).
Excellent English level - written and spoken,
Knowledge of Architectural specific design standards and building regulations
Ability to interact with engineering disciplines, clients, and vendors at all levels.
Experience using REVIT and BIM desirable.
Familiar with BCAR and BCMS.
Benefits
21 days holidays,
Professional membership fees paid by the company yearly.
Monthly CPD carried out in house.
Free parking at head office.
Pension contributions after time served.
Out of office lunch allowance when visiting site's.
4PM finish on Fridays.
MC
....Read more...
Type: Permanent Location: Cork, Republic of Ireland
Start: ASAP
Posted: 2024-11-22 09:44:36
-
Role: Structural Engineer
Location: Meath
Salary: Negotiable DOE
Our client is one of the largest producers of Precast Concrete Structural components in Ireland & the UK.
Due to their ongoing expansion they have a requirement for Structural Engineer to work in our Design office.
The successful candidate is required to have the following:
Level 8 Degree in Civil / Structural Engineering
Graduate level or 2 years' experience in an Engineering role
Knowledge in the use Structural Engineering software such as Tekla Structural Designer / TEDDS etc
Knowledge of Eurocodes and Building Regulations / Technical Guidance Documents.
BIM related knowledge.
Ability to work in a team environment.
Good Communication skills
Excellent english communication skills both written and verbal
These positions will suit methodical, punctual and driven individuals interested in working in a fast-paced environment.
Experience in the Precast Concrete Field, whilst not a prerequisite, will be an advantage.
MC ....Read more...
Type: Permanent Location: Meath, Republic of Ireland
Start: ASAP
Posted: 2024-11-22 09:29:43
-
Audio Visual (AV) Systems Designers - Are you an audiovisual systems designer with Technical, design and great AutoCAD skills - If so then read on.
You will have 3-5 years av design and will be working from the initial sales brief to create final drawings for approval.
You must be a personable person who has excellent team working ability in order to create bespoke systems for clients.
The client are medium sized specialist av systems integrator who specialise in high end residential AV projects and due to growth require a new member of the team.
Ideally you will have AutoCAD design skills along with a technical/design background from within the audio visual industry where you have good knowledge of Crestron, Lutron, Networking / switching, AV Racks, home cinema and fibre wiring, screens / projector, IT Home Networking switching.
If this is you then send me your full CV ASAPONLY CANDIDATES IN THE UK AND ALLOWED TO WORK HERE LEGALLY NEED APPLY.
MUST HAVE AV EXPERIENCEAUTOCAD CAD SYSTEMS INTEGRATION DESIGN ELEVATIONS SCHEMATIC LAYOUT SCHEME CRESTRON LUTRON DALI NETWORK CEDIA CINEMA BESPOKE HOME AUTOMATION SMARTHOME AV A-V A/V AUDIO VISUAL AUDIO-VISUAL AUDIOVISUAL RESIDENTIAL LONDON MIDDX MIDDLESEX ESSEX HERTS HERTFORDSHIRE ....Read more...
Type: Permanent Location: London, England
Salary / Rate: £35000 - £40000 per annum
Posted: 2024-11-22 09:22:23
-
My client is an established designer, manufacturer and supplier of bespoke, turnkey industrial machinery worldwide.
With a reputation for providing the highest levels of product and after service care to their customers, they are currently looking to recruit an experienced Service & Parts professional to lead and manage the development and implementation of a Service and Parts Department which will oversee the entire service and parts lifecycle, from product release, development and to aftermarket support & field service operations.
This is an exciting opportunity to lead a new subsidiary of the business and offers great progression opportunities and the autonomy to guide and grow this new aspect of the business.
This role will play a critical role in ensuring customer satisfaction, driving revenue growth and enhancing the overall brand reputation of the organisation.
Key Responsibilities:
Develop and implement a comprehensive service and parts strategy aligned with overall business objectives.
Identify and prioritise service and parts opportunities to maximise revenue and profitability.
Forecast future service and parts demand to optimise inventory levels and resource allocation.
Lead the development of high-quality service and parts solutions, including diagnostics, repair procedures, and spare parts kits.
Ensure service and parts documentation is accurate, up-to-date, and easily accessible to field service technicians and customers.
Collaborate with suppliers to source and procure high-quality, cost-effective service and parts.
Oversee the planning, scheduling, and execution of field service operations, including installations, repairs, and maintenance.
Monitor and analyse field service performance to identify areas for improvement.
Develop and implement training programs to enhance the skills and knowledge of field service technicians.
Provide exceptional customer support by resolving service issues promptly and effectively.
Build strong relationships with customers to understand their needs and expectations.
Implement customer satisfaction programs to measure and improve customer experience.
Lead and motivate a high-performing team of service and parts engineers, technicians, and support staff.
Foster a culture of innovation, continuous improvement, and customer focus.
Recruit, hire, and develop talented individuals to strengthen the team
Experience Requirements
At least 5 years' experience in service and parts management, ideally gained within a manufacturing or engineering environment
Strong technical knowledge of engineering principles and product design
Proven track record of leading and managing high performing teams
Excellent problem-solving and decision-making ability
Previous experience of using relevant software tools (ERP / CRM etc.)
A strong understanding and knowledge of international trade and logistics is advantageous
....Read more...
Type: Permanent Location: Kings Lynn, England
Start: ASAP
Salary / Rate: £32000 - £42000 per annum + Salary Negotiable DOE
Posted: 2024-11-21 17:31:34
-
An award winning independent Opticians based in Muswell Hill, North London are looking for a Dispensing Optician to join the team.
The company is well known for its excellent levels of service and its range of eye care services on offer.
It utilises modern testing equipment and focuses on offering a professional and friendly service.
Dispensing Optician - Role
Luxury independent Opticians
Dispensing lenses to all levels
Working with high end designer brands such as Oliver Peoples, Chanel and Lindberg
Helping patients to select frames
Meeting and greeting patients
Booking appointments
Dealing with collections, measurements and adjustments
Working 3, 4 or 5 days a week
Typical working hours from 9am to 6pm
Salary between £32,000 to £40,000 DOE (Pro rata if part time)
Dispensing Optician - Requirements
A qualified Dispensing Optician regisdtered with the GOC
Ideally around two years' + experience.
Customer focussed
Courteous and professional
Proactive and motivated to learn
Interest in fashion and branding
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply' link as soon as possible. ....Read more...
Type: Permanent Location: North London, England
Salary / Rate: £32000 - £40000 per annum + Bonus
Posted: 2024-11-21 15:06:30
-
A well-established independent Opticians based in Cockermouth, Cumbria are looking to recruit a full or part time Dispensing Optician.
This advanced independent Opticians has gone from strength to strength.
It has a long standing reputation in the area for its high levels of patient care and professionalism.
Dispensing Optician - Role
Clinically focused independent
Small group of 4 practices
Beautiful part of the country
High clinical standards
Caring approach
Loyal patient base of all ages
Amazing patient reviews
45 minute testing times
Enhanced clinics - Dry eye, myopia management, colourimetry
Working alongside an experienced team
High level of clinical freedom
Excellent range of designer frames - Lindberg, Face a Face, Gucci
High Quality Hoya lenses
Working 3, 4 or 5 days a week including most Saturdays (1 in 4 off)
Opening hours from 9am to 5.30pm (4pm on a Sat)
Salary between £28,000 to £33,000 DOE
Professional fees paid
Birthday off work
Free & Regular CPD courses
Simply Health
Retail Discounts
CLO training and funding available
Free parking close by
Dispensing Optician - Requirements
Fully qualified Dispensing Optician registered with the GOC
Open to all levels of experience
Patient focused
Caring
Plenty of support If you are newly qualified
Willing to learn and develop
Excellent communications and organisational skills
To apply for this role please send a copy of your CV to Rebecca Wood using the apply now link. ....Read more...
Type: Permanent Location: Cockermouth, England
Salary / Rate: £28000 - £33000 per annum
Posted: 2024-11-21 15:06:30
-
A well-established independent Opticians based in Sevenoaks, Kent are looking for a part Dispensing Optician to join their practice.
Dispensing Optician - Role
Mid to high end independent
Comprehensive sight tests with advanced equipment
A focus on customer care ensuring every patient leaves happy
Long standing team with very low staff turnover
Varied frame range including exclusive designer brands - Lindberg, Porche, Tom Davies
Access to high quality lenses - Seiko, Hoya etc
Professional freedom to work with the products you feel are best for the patient
On site lab - help glaze from time to time
Specialist services - Myopia management
Input into frame selection
Working 2 days a week - Either Mon OR Tues, with the 2nd day being flexible
Opening hours from 9am to 5.30pm
Salary between £28,000 to £33,000 Pro Rata
Professional fees covered - Pro rata
Dispensing Optician - Requirements
Registered with the GOC
Exceptional customer service skills
Caring attitude who enjoys going above and beyond
Team player
Attention to detail
Brand awareness
Interest in a long term role with an independent
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply' link as soon as possible. ....Read more...
Type: Permanent Location: Sevenoaks, England
Salary / Rate: £28000 - £33000 per annum
Posted: 2024-11-21 15:05:28
-
An award winning independent Opticians based in Bristol are looking for a full time Dispensing Optician to join the team.
This is a very well-known and well respected independent Optician with a loyal customer base.
The emphasis is on offering a professional and tailored service to all its customers.
Dispensing Optician - Role
Single or double testing each day
Innovate - Always investing into new equipment and the latest development
Focus on offering a personalised service
Access to a wide range of designer and bespoke frames
Professional freedom to work with the very best lenses
Refit due soon which will include a Visioffice
Involvement in stock selection
Working alongside the manager to help lead the team
Working full time, 5 days a week including most Saturdays
Typical working hours from 9am to 5.30pm (5pm on a Sat)
No Sundays or Bank holidays
Salary between £25,000 to £35,000 (Potentially room for movement for the right candidate)
Professional fees paid
Support from other DO's within the business
Continuous training and development
Dispensing Optician - Requirements
Fully qualified Dispensing Optician registered with the GOC
Interest in working with exciting frame brands
Proactive
Exceptional customer service skills
Wants to be part of a close knit team
To apply for this role please send a copy of your CV or call 01142381726 for more information. ....Read more...
Type: Permanent Location: Bristol, England
Salary / Rate: £25000 - £35000 per annum
Posted: 2024-11-21 15:01:21
-
A high end independent Opticians based in Cambridge are looking for a full time Dispensing Optician to join the team
Dispensing Optician - Role
Multi-award winning practice
Modern, Boutique environment
Close knit team with a family feel
A focus on the customer experience
Varied frame range including exclusive designer and niche brands
Quality dispenses
Travel to international trade shows
Regular training session both in-house and external
Working 5 days a week including a Saturday
Opening hours from 8.30am to 5.30pm
Salary between £28,000 to £36,000 DOE
Professional fees covered
Free parking available
Dispensing Optician - Requirements
Registered with the GOC
Flair for fashion
Creative
Willingness to go above and beyond
Loyal
Team player
Attention to detail
To avoid missing out on this opportunity, please send your CV across to Rebecca Wood using the ‘Apply' link as soon as possible.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: £28000 - £36000 per annum
Posted: 2024-11-21 14:57:45
-
A high end independent Opticians in Peterborough are looking for a full time Dispensing Optician to join the team.
The company is well known for its excellent levels of service and its range of eye care services on offer.
It primarily stocks high end, designer and bespoke frames including; Versace, Mykita and Chanel.
Dispensing Optician - Role
Single testing room practice with 3-4 staff members
Beautiful boutique style practice
Amazing eyewear
Specialist dispensing - Myopia control, Sports Vision
Access to a wide range of lens suppliers
Making sure each patient receives the very best eyecare service
Leading and motivating the team
Dealing with complex patient queries
Professional freedom to choose what is best for the patient
Input new ideas
Salary between 28-35K DOE
Bonus scheme is being introduced
Professional fees paid
Working 5 days a week from 9am to 5.30pm
Practice closed on Sundays and Mondays
Dispensing Optician - Requirements
Qualified Dispensing Optician registered with the GOC
Previous management or supervisory experience would be an advantage
Independent experience would be advantageous
Experience of improving and increasing turnover in an Opticians
Customer focused
Confident
Excellent organisational skills
To apply for this role please send a copy of your CV or call 0114 238 1726 for more information. ....Read more...
Type: Permanent Location: Peterborough, England
Salary / Rate: £28000 - £35000 per annum
Posted: 2024-11-21 14:57:43
-
My client is an established designer, manufacturer and supplier of bespoke, turnkey industrial machinery worldwide.
With a reputation for providing the highest levels of product and after service care to their customers, they are currently looking to recruit a Service & Parts Manager who will take responsibility for setting up a new Service & Parts Department for the company.
This is a new position within the business, due to ongoing growth and expansion and is a fantastic opportunity for an experienced Parts and Service professional to step-up and prove their abilities.
If you are a motivated individual with a passion for service excellence, strong leadership and organisational skills, a keen eye for detail & problem-solving and have previous experience in managing teams and processes I would be keen to discuss this role further.
This opportunity will play a significant part in the ongoing growth of the company and will provide the opportunity to build a team as the department grows.
Experience Requirements
At least 5 years' experience in service and parts management, ideally gained within a manufacturing or engineering environment
Strong technical knowledge of engineering principles and product design
Proven track record of leading and managing high performing teams
Excellent problem-solving and decision-making ability
Previous experience of using relevant software tools (ERP / CRM etc.)
....Read more...
Type: Permanent Location: Kings Lynn, England
Start: ASAP
Salary / Rate: £32000 - £38000 per annum + Salary Negotiable DOE
Posted: 2024-11-21 11:22:05
-
Unity Recruitment are currently seeking an assistant manager for our client who have a luxury store within Heathrow Airport.
The position will be available to start immediately and is a permanent contract.
As the assistant manager you will be Based at Heathrow Airport, Middlesex you will be working for a luxury retailer who sell designer brands of items such as suitcases, hand luggage and luggage accessories.
They also have concessions in Harrods and other various locations.
The working week will be 5 days out of 7 and this could include weekends.
£28,000 per annum plus commission OTE £36,000.00 approx.
Minimum 37.5 hours per week.
It is a bonus if you have experience working with a designer brand.
Must have at least 2-3 year's assistant manager experience in retail.
This is a great opportunity.
If you are an Assistant manager and this vacancy sounds of interest to you - Then please send your updated CV today or Carly on 02036685680 ext 113.
....Read more...
Type: Permanent Location: Feltham, England
Start: ASAP
Duration: PERM
Salary / Rate: £28000 - £36000 per annum + Commision
Posted: 2024-11-21 09:32:22
-
An exciting opportunity has arisen for a Structural Engineer with 3+ years of post-graduate experience in a similar role to join a leading Structural Engineering consultancy, offering excellent benefits and a competitive salary.
As a Structural Engineer, you will play a key role in the design and delivery of projects spanning healthcare, residential, and commercial sectors.
This role offers hybrid working (3 days office, 2 days home).
What we are looking for:
* Ideally, have worked as a Structural Engineer or in a similar role.
* Possess 3+ years of post-graduate experience.
* A degree in Civil or Structural Engineering.
* Knowledge of Finite Element Analysis.
* Familiarity with producing calculations and specifications.
* Understanding of preparing tender and contract documents.
* Skilled in software such as Robot, Masterseries, Etabs, Tedds, and CSC Fastrac Building Designer.
* Ability to conduct technical reviews of drawings and designs from junior colleagues.
What's on offer:
* Competitive salary
* 26 days plus bank holidays
* ICE Training Agreement
* Hybrid working arrangements
* Fantastic training and development culture
* Access to mentoring support from industry experts
* Opportunity to play a key role in exciting and varied projects
* Fast-tracked career progression for the right candidates
This is a great opportunity for a driven Structural Engineer to excel.
Apply now to shape your career!
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Sheffield, England
Start:
Duration:
Salary / Rate:
Posted: 2024-11-21 09:28:28
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
The Technical Sales Representative ensures that the assigned revenue, margin, and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts the Eastern PA, Eastern NY and NJ.
The candidate must live in the territory to support it.
We prefer the candidate to live in the center of the region which is Allentown.
This position supports the Nudura and Tremco Barrier Solutions (TBS) business units.
Nudura is the world's leading brand of Insulated Concrete Forms (ICFs) for sustainable and durable exterior wall construction.
Compared to traditional wood-framing, Nudura ICFs create the most energy-efficient and disaster-resilient residential and commercial buildings, including schools, hospitals, safe rooms and more.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested or assigned.
EDUCATION
Bachelor's Degree in Business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE
Four to ten years of related experience and/or training in the construction industry. A minimum of two years of customer service experience is preferred Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Assembly line related product segments Basic knowledge of product chemistries Insulated Concrete Forms knowledge/experience a plus
OTHER SKILLS AND ABILITIES:
Ability to travel extensivelywithin assigned territory.
Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills Proficient with Microsoft Office Suite (Word, Excel, PowerPoint) Salesforce.com or other CRM software experience preferred Possess a professional curiosity to figure out how things work or are put together Ability to retain knowledge and training Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Accepts and utilizes feedback effectively.
Reads an audience and adjust style and approach accordingly.
Excellent written and verbal communication skills Strong presentations skills Excellent interpersonal and organizational skills Ability to build relationships and deliver exceptional customer service.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position is $85 to $110K base plus incentive compensation based on experience.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Allentown, Pennsylvania
Posted: 2024-11-20 14:10:33
-
Wood Machinist
Wood Machinist Salary: £15ph
The Company
This business specialises in crafting bespoke, high-quality products for industries like marine, residential, and luxury markets.
It excels in creating interiors and exteriors for superyachts, custom furniture, and metal finishes, all tailored to client needs.
Its offerings include durable teak tables, bespoke doors, lightweight materials, and precision veneers for superior aesthetics and functionality.
Expertise extends to environmentally sound materials and advanced techniques, ensuring products meet the highest standards of durability and craftsmanship.
Wood Machinist Role & Responsibilities
Machine Operation
- Operate and set up machines like spindle moulders, dimension saws, overhand planers, and thicknessers to shape and finish timber accurately.
- Adjust machines to required settings, ensuring precision in cuts and profiles.
- Tool Preparation and Maintenance - Sharpen, replace, and maintain cutting tools such as blades and cutters.
- Ensure tools and machines are clean, safe, and in working order.
Material Handling
- Select and prepare the correct type and size of wood or board materials for machining based on project specifications.
Reading and Interpreting Technical Drawings
- Study detailed drawings, templates, and production specifications to understand dimensions and required finishes.
Shaping and Profiling Wood
- Create complex shapes and joints, including rebates, grooves, and mouldings, while maintaining high precision and quality.
Quality Control
- Inspect finished products for defects, ensuring dimensions and finishes meet client specifications.
- Perform adjustments to maintain consistency throughout production.
Problem-Solving and Adaptation
- Identify and resolve issues like incorrect cuts or machine malfunctions quickly to minimise waste and downtime.
Team Work
- Work alongside other machinists, designers, and production staff to meet project deadlines & communicate effectively about progress or challenges.
How to Apply for the Wood Machinist Position
Apply now or call/message Hayden at Holt Engineering on 07955 081 482 for more information on the Wood Machinist role.
'' ....Read more...
Type: Contract Location: Poole,England
Start: 20/11/2024
Duration: 2 Years +
Salary / Rate: £15 - £15.50 per hour
Posted: 2024-11-20 09:45:05
-
The position involves the design, specification and project management of IT / Physical infrastructure / telecommunications projects.
Project sectors include commercial, finance, government, higher education, museums, libraries, hospitality and medical.
You should have a minimum of 5 or more years experience in design/consulting for telecommunications infrastructure and systems, including an understanding of LAN, physical security and Voice network technologies.
BICSI certification is preferred, as is an understanding of architectural and engineering/construction design processes and excellent oral and written communications skills.
The client is purely a design consultancy and neither sells equipment nor performs installations.
If you have the right skills in infrastructure design and now seek a new role then please send me your full technical CV that clearly demonstrates your skills and experiences.
NO SPONSORSHIP IS ON OFFER YOU MUST BE IN THE UK / COMING TO THE UK WITH A VISA TO BE CONSIDERED OR HAVE THE APPROPRIATE WORKING VISA
RCDD BICSI IT DESIGN CAD AUTOCAD CAD STRUCTURED DESIGN CABLING RCDD BICSI CNID CNIDP ICT CONSULTANT CONSULTANCY DATA NETWORKS VOICE VIDEO SPECIFY UC IP UNIFIED COMMS SMART BUILDING ....Read more...
Type: Permanent Location: London, England
Salary / Rate: £60000 - £80000 per annum
Posted: 2024-11-20 08:53:46
-
Mechanical DesignerInside IR35 contract
Initial 6 months
About the RoleWe are seeking a skilled and proactive Mechanical Designer to join our Engineering team.
This role is pivotal in designing and delivering projects and modifications to meet the evolving needs of our business and site operations.
Key Responsibilities
Collaborate with internal stakeholders to develop and define project scopes.
Provide a comprehensive mechanical and maintenance design service, including drawing and documentation preparation.
Conduct design calculations and ensure compliance with all relevant codes, standards, and EHS requirements.
Specify and procure engineering items for bespoke requests.
Manage purchasing and procurement to achieve cost and time targets.
Plan, organise, and support internal and external technicians during installation and commissioning.
Scope of Work
Contribute to design/project reviews.
Obtain quotations, place orders, and liaise with suppliers to acquire technical data and support.
Host supplier visits and collaborate with production, maintenance, and support departments to meet design requirements.
Develop bespoke designs to enhance plant performance.
Qualifications and Experience
Essential:
HNC in Mechanical Design or equivalent.
Significant practical design experience in a process or manufacturing environment.
Familiarity with PED/PSSR and piping systems.
Experience using CAD packages and preparing functional design specifications.
Desirable:
NEBOSH certification.
Personal Skills and Competencies
Analytical thinking, initiative, and results orientation.
Strong organisational and prioritisation skills.
Proven ability to maintain effective working relationships.
A meticulous and standards-driven approach to work.
Work Conditions
Office-based role involving computer work and occasional on-site interactions.
Prolonged sitting and work in a target-driven environment.
Why Join Us?This is an exciting opportunity to contribute to meaningful projects and gain exposure to a dynamic engineering environment.
If you are passionate about mechanical design and problem-solving, we'd love to hear from you ....Read more...
Type: Permanent Location: Burnley, England
Start: ASAP
Duration: 6 months
Salary / Rate: Up to £43 per hour
Posted: 2024-11-19 14:34:14
-
Audio Visual (AV) Systems Designers - Are you an audiovisual systems designer (4-7 years experience) with Technical, design and great AutoCAD skills - If so then read on.
This position is with CORPORATE av systems integrator that is going from success to success, winning high-spec major projects new build / retro fits and development projects.
You will be working from the initial sales brief to create final drawings for approval.
You must be a personable person who has excellent team working ability in order to create bespoke systems for corporate end users.
Ideally you will have AutoCAD design skills along with a technical/design background from within the (corporate) audio visual industry where you have good knowledge of Crestron, Videowalls, AV Racks, meeting rooms, smart building control, boardrooms, networks along with fibre wiring.
If this is you then send me your full CV ASAP.ONLY CANDIDATES IN THE UK AND ALLOWED TO WORK HERE LEGALLY NEED APPLY.
MUST HAVE AV EXPERIENCEAUTOCAD CAD DESIGN SCHEMATIC LAYOUT SCHEME CRESTRON EXTRON QSC Q-SYS AUDINATE DANTE VC VIDEOWALL PROJECTOR BARCO CHRISTIE BENQ SONY PANASONIC VIDEOCONFERENCE AVIXA CTS CTS-D CORPORATE BLUE-CHIP BESPOKE AV AV A-V A/V AUDIO/VISUAL AUDIO VISUAL AUTOMATION BERKS BERKSHIRE BUCKS BUCKINGHAMSHIRE SURREY LONDON ....Read more...
Type: Permanent Location: Berkshire, England
Salary / Rate: £50000 - £60000 per annum
Posted: 2024-11-18 08:45:24
