-
FPGA Design Engineer with DSP ideally radar system design experience maximising multiple FPGA???s.
The ideal candidate will be at technical leadership level willing to unpack requirements, coach juniors, conduct design reviews and be hands on where needed to deliver working FPGA architecture that is easily implemented to a client environment.
Requirements
Hands on VHDL based FPGA Design experience to Senior or ideally Principal level.
Multiple FPGA architecture.
Digital Signal Processing, high speed, satellite communications, ideally radar experience.
Able to absorb, specify and champion high level requirements taking the time to appreciate and understand the application needs.
Responsibilities
Electronic design of advanced FPGAs, from requirements, preliminary specification, test, system certification to verified design implemented and running on target hardware.
Firmware
VHDL simulation, test bench design, implementation verification and debug using test equipment oscilloscopes, spectrum analysers, signal generators, etc.
FPGA and VHDL Design Reviews.
Masters, Bachelors or PhD in relevant area from a good university. ....Read more...
Type: Permanent Location: North London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £75000 - £165000 Per Annum None
Posted: 2026-01-27 09:06:59
-
Software Engineer (C++ | Signal Processing | Algorithms | UML)
Location: Southwest England (hybrid options depending on project)
Sector: Maritime defence and security technology
About the organisation
Holt Engineering is working with an international engineering business that develops advanced maritime systems used by navies worldwide, spanning sonar/hydroacoustics, sensor-to- decision solutions, and command & control capabilities.
Work sits at the intersection of real- world physics, high-performance software, and mission critical reliability.
The role
Youll design and build software that turns complex sensor data into actionable outputs, including detection, classification and tracking of underwater targets.
Youll work in multi- disciplinary teams (software, systems, test, and hardware) and contribute across the full lifecycle: requirements, architecture, implementation, verification, and support.
What youll be doing
Develop C++ components for performance-critical, real-time or near real-time processing pipelines.
Design and document software architecture using UML (e.g., class diagrams, sequence diagrams, state models).
Implement and optimise signal processing and algorithm development for detection/classification/tracking workflows.
Apply strong object-oriented programming principles (SOLID, clean architecture, maintainable patterns).
Write unit/integration tests, support verification activities, and contribute to continuous improvement of coding standards.
Collaborate with Systems Engineering to translate requirements into robust designs and deliverable increments.
Essential skills (must-have)
Strong commercial experience in C++.
Proven signal processing experience (e.g., filtering, spectral analysis, detection theory, estimation, tracking).
Demonstrable algorithm development (from concept to validated implementation, including performance tuning).
Confident use of UML for software design and communication.
Solid OOP fundamentals and experience building maintainable, testable codebases.
Desirable (nice-to-have)
Experience with real-time constraints, multi-threading, latency/performance optimisation.
Familiarity with sensor fusion, tracking (e.g., Kalman/particle filters), classification, feature extraction.
Experience in safety/mission-critical engineering environments (e.g., rigorous V&V, secure development practices).
Linux development, modern build tooling (CMake), Git-based workflows, CI/CD. ....Read more...
Type: Permanent Location: Plush,England
Start: 26/01/2026
Salary / Rate: Competitive
Posted: 2026-01-26 13:04:04
-
An exciting opportunity has arisen for a Senior Communications Engineer to join an advanced avionics team working on cutting-edge spacecraft missions.
This role will play a key part in the design, development, and verification of spacecraft communications subsystems, supporting complex missions from concept through to launch and operations.
Youll take ownership of the communications subsystem, working across disciplines including systems engineering, Command & Data Handling (C&DH), procurement, and Assembly, Integration & Verification (AIV).
This is a hands-on, senior-level role requiring both strong technical expertise and the confidence to lead within a multidisciplinary environment.
Key Responsibilities
- Own communications work packages, including subsystem design baseline and architecture, requirements management and VCD activities
- Develop, review, and maintain spacecraft data and RF link budgets
- Model and simulate space-to-ground communications links
- Select, procure, and manage suppliers for communications hardware.
- Perform antenna and multipath analysis, including interference and impingement assessments
- Support frequency licensing and ITU regulatory activities
- Support ground station selection and interface discussions with ground segment teams
- Plan and execute unit-level acceptance testing
- Generate verification and validation plans and test procedures for communications systems
- Manage resources, schedules, and cost estimates in line with applicable standards and regulations
- Mentor and support junior engineers within the communications team
Essential Skills & Experience
- Bachelors or Masters degree in Electronics, Communications, or a related discipline
- Strong experience defining and managing spacecraft communications requirements
- Proven experience developing and maintaining satellite link budgets
- Experience designing and developing spacecraft communications subsystems and architectures
- Hands-on experience with communications circuits and hardware testing
- Experience producing and executing communications V&V plans and procedures
- Knowledge of ITU frequency licensing constraints for space applications
- Eligible to work in the UK and Europe
Desirable Experience
- Broader understanding of overall satellite systems design
- Antenna design and RF propagation experience
- Detailed knowledge of communications link budget analysis
- Familiarity with ITU regulations and licensing processes
Whats on Offer
- Flexible and hybrid working options
- Optional 9/75 working pattern
- 25 days holiday, increasing with service (plus bank holidays)
- Life insurance and long-term sick pay
- Private healthcare (taxable benefit)
- Relocation support available
- Modern office and cleanroom facilities
TT ....Read more...
Type: Permanent Location: Oxfordshire,England
Start: 26/01/2026
Salary / Rate: £60000 - £90000 per annum, Benefits: Hybrid & flexible working, 9/75 work pattern, & more!
Posted: 2026-01-26 12:06:03
-
Im supporting a leading engineering organisation in Dorset who are looking for a Principal Embedded Electronics Engineer to take a technical lead role within a specialist product development team.
This is an opportunity to work on complex, high-performance electronic systems used in advanced maritime technology from high-bandwidth digital telemetry to low-noise analogue signal acquisition and power amplification.
If you enjoy solving difficult engineering problems, guiding talented engineers, and taking designs all the way from concept through to integration and acceptance, this role should be on your radar.
What youll be doing:
- Leading the design and development of cutting-edge digital and analogue electronics for advanced systems
- Owning requirements capture, schematic design, PCB layout, and circuit simulation
- Developing solutions across high-speed digital, FPGA/SoC, embedded processors, power electronics, and low-noise analogue
- Driving technical reviews and ensuring designs meet EMC, CE/UKCA and relevant engineering standards
- Leading system-level engineering work from prototype through to test, verification, and production readiness
- Working closely with cross-disciplinary teams to solve complex technical issues
- Coaching and mentoring junior engineers to strengthen capability across the department
- Maintaining high standards of technical documentation, design packs, and integration reports
What Im looking for:
- Degree-qualified Electronic Engineer
- Strong background in PCB design, simulation, and electronic development tools
- Expertise in one or more of:
- High-speed digital design (LVDS, Ethernet)
- FPGA/SoC with VHDL
- Embedded processor design (C/C++, RTOS)
- Analogue signal conditioning & data acquisition
- Power amplifier or power supply design
- Solid understanding of EMC, electrical safety, and CE/UKCA requirements
- Experience with system-level integration, debugging, and verification
- Confident communicator who can influence design decisions and lead technical discussions
- Able to work in a dynamic, fast-paced engineering environment
Why this opportunity?
Youll be joining a highly capable engineering team working on technology where reliability, precision, and performance genuinely matter.
Its a role with real technical depth, direct involvement in product innovation, and the chance to shape both engineering solutions and team capability.
How to Apply
Interested? Id love to tell you more about this role call Ian Broadhurst on 07734406996 or drop me a message at ian.broadhurst@holtengineering.co.uk. ....Read more...
Type: Permanent Location: Winfrith Newburgh,England
Start: 26/01/2026
Salary / Rate: Competitive
Posted: 2026-01-26 07:05:04
-
Are you a hands-on leader with a passion for innovation, systems engineering, and technical delivery? This is a superb opportunity to join a highly respected engineering organisation working on complex, cutting-edge projects with real-world impact.
As Engineering Manager, youll lead multi-disciplinary teams through the full engineering lifecycle from concept and design to testing and acceptance.
Youll take ownership of engineering work packages, ensuring projects are delivered to the highest standards of quality, safety, and technical integrity.
This role is ideal for someone who thrives in a fast-paced, collaborative environment and enjoys turning complex challenges into practical solutions.
Youll be the bridge between engineering disciplines, project teams, and stakeholders using your technical and leadership skills to drive performance and innovation.
What youll be doing:
- Leading and coordinating engineering activities across multiple disciplines.
- Driving the delivery of technical solutions to time, cost, and quality targets.
- Managing engineering resources, schedules, and reporting.
- Developing specifications, documentation, and bid inputs.
- Supporting design, test, and verification phases of projects.
- Promoting best practice and continuous improvement across engineering processes.
What youll need:
- Strong background in electrical or electronic engineering (Degree, HND or equivalent).
- Experience with CE/UKCA directives, EMC, electrical safety, and related standards.
- Solid understanding of system engineering principles and lifecycle processes.
- Proven ability to plan, deliver, and report on engineering work packages.
- Excellent communication skills and confidence leading technical discussions.
- Eligibility to obtain full UK Security Clearance (SC).
Youll be joining a business that genuinely values its people offering professional development, flexibility, and the chance to work on projects that make a real difference.
How to Apply
Interested? Id love to tell you more about this role call Ian Broadhurst on 07734406996 or drop me a message at ian.broadhurst@holtengineering.co.uk. ....Read more...
Type: Permanent Location: Winfrith Newburgh,England
Start: 26/01/2026
Salary / Rate: Competitive
Posted: 2026-01-26 07:04:03
-
Join a global engineering team driving the green energy transition.
We are seeking a Lead Verification and Validation Engineer to take ownership of HVDC Control and Protection testing and validation activities, ensuring delivery on time and to the highest technical standards.
Key Responsibilities
Lead planning and coordination of Verification and Validation activities.
Develop and execute Factory System Test (FST) cases and support Factory Acceptance Tests (FAT).
Create HVDC system and plant models using PSCAD, RSCAD, or EMTP-RV.
Prepare control system requirements for RTDS lab setups.
Support commissioning teams and contribute to process and tool improvements.
Requirements
Degree in Electrical, Power Systems , Power Electronics Engineering (or equivalent).
Proven experience in HVDC Control and Protection design and verification.
Strong technical skills in PSCAD, RSCAD modelling and system behaviour analysis.
Leadership experience in managing validation teams.
....Read more...
Type: Permanent Location: Stafford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £48000 - £55000 Per Annum None
Posted: 2026-01-23 12:52:44
-
A Production Test Technician is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and verification of high-quality electronic products.
The Production Test Technician, Essex, will play a key role within Pickering's production test team, ensuring the reliability and performance of electronic systems through precise testing, continuous process improvement, and fault analysis.
Responsibilities include:
Working to implemented electronic test plans and procedures.
Performing tests on systems, including both hardware and software components.
Ensuring the reliability and accuracy of test results through continuous improvement initiatives.
Developing a thorough understanding of Pickering's products and systems.
Producing detailed reports of faults found to support ongoing product enhancement.
Assisting in the development of ATE test programs for new products.
Fault finding down to component level and carrying out clean, accurate repairs.
Adapting to new test methods and associated test fixtures/cables.
The Production Test Technician, Essex, will have the following key skills:
A higher-level qualification in Electrical or Electronic Engineering, such as HNC or BTEC Level 3.
Some experience in electronic test, ideally within a manufacturing or R&D environment.
Strong knowledge of electronic test methodologies, tools, and equipment.
Ability to fault-find and test down to component level.
Awareness of industry standards such as ISO 9001 and IPC.
Excellent problem-solving skills, attention to detail, and effective communication.
APPLY NOW - the Production Test Technician job in Essex could be of interest, send your CV to ADighton@RedlineGroup.Com
Or call Adam Dighton on 01582 878821 / 07961 158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £28000 - £31000 per annum
Posted: 2026-01-22 00:00:04
-
An exciting opportunity has arisen for an experienced Hardware Development Engineer to join a fast-paced, multi-disciplinary team designing and delivering secure digital hardware solutions.
This is a hands-on role covering the full development lifecycle, from concept and design through to testing, production support, and customer integration.
What Youll Do
- Take ownership of hardware design and delivery across the entire product lifecycle.
- Specify and design high-speed digital boards for products and test equipment.
- Create, build, and test development and production test equipment.
- Capture schematics and support PCB layout activities.
- Collaborate closely with Mechanical, Software, and Systems engineers to ensure seamless integration.
- Perform hardware design verification and support system/software testing.
- Produce development and production test processes and documentation.
- Provide production support, including resolving test and manufacturing issues and training production staff.
- Address design changes, component obsolescence, and integration of secure data products into customer platforms.
What Were Looking For
- Degree in Electronic Engineering or a related discipline.
- Full hardware development lifecycle experience with a strong grasp of electronic design fundamentals.
- Proven track record in high-speed digital circuit development and signal integrity.
- Skilled in hardware testing and troubleshooting using oscilloscopes, logic analysers, and similar tools.
- Proficiency with industry-standard CAD tools (e.g., Cadence or Mentor schematic/layout).
- Must be a UK national and able to obtain UK Security Clearance (SC).
Desirable Skills
- Experience supporting production and applying Design for Test (DFT) and Design for Manufacture (DFM) techniques.
- Embedded firmware design (C/C++/Assembler/Python).
- Software design for test and test-equipment development.
- Ability to write test specifications and conduct hardware/system testing.
This is a fantastic opportunity to work on innovative, secure hardware technologies, contributing to projects with real-world impact while developing your expertise in a collaborative and forward-thinking engineering environment.
TT ....Read more...
Type: Permanent Location: Farnborough,England
Start: 21/01/2026
Salary / Rate: Competitive
Posted: 2026-01-21 21:07:04
-
A Project Engineer is sought to join an innovative engineering team in Tyne and Wear, contributing to the delivery of Rail and Defence projects on time, on budget, and to specification.
The Project Engineer, Tyne and Wear, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include multi-disciplined engineering projects, product design, development, build, testing, and verification processes.
Responsibilities include:
Work with multi-disciplined engineering teams and stakeholders to define project requirements and technical specifications.
Create and maintain project schedules, milestone tracking, and technical documentation in line with customer and organisational requirements.
Develop and execute design, development, build, testing, and verification activities for products and equipment across the organisation.
Debug and validate engineering solutions and project deliverables, ensuring alignment with quality standards and safety regulations.
Collaborate with external stakeholders, suppliers, and internal teams to ensure seamless project delivery and resolution of technical issues.
Mentor junior engineers and apprentices, peer review engineering work, and contribute to continuous improvement initiatives.
Maintain comprehensive project-related technical documentation to support audits, compliance, and knowledge sharing.
Key skills & experience:
Degree or equivalent qualification in Engineering or a related discipline.
Experience working on Rail, Defence, or complex technical engineering projects within a multi-disciplined team.
Proficiency with project management tools, engineering documentation, and testing equipment.
Strong problem-solving, analytical, and organisational skills.
Effective communication skills and the ability to work collaboratively with internal teams and external partners.
How to apply:
Apply now for the Project Engineer role in Tyne and Wear.
Send your CV to adighton@redlinegroup.Com or call Adam on 01582 878821 ....Read more...
Type: Permanent Location: Newcastle upon Tyne, England
Start: ASAP
Posted: 2026-01-21 16:16:57
-
Senior Electronics Design Engineer - Consumer Electronics
I am currently recruiting on behalf of a world-renowned consumer electronics company that has been designing and manufacturing high-volume products supplied to households across the globe for many years.
Based in Amsterdam, the company is looking to appoint its first Netherlands-based Electronics Specialist, joining an established international engineering team.
This role will involve the design of analogue and digital circuitry, hands-on prototyping, validation and verification, close collaboration with engineering teams based in Asia, and the technical leadership of complex, high-volume projects.
Key skills and experience required for this Senior Electronics Design Engineer role:
Senior-level experience in mixed-signal analogue and digital circuit design
Experience working within a small engineering team in a consumer electronics environment (ideally a start-up or scale-up)
Strong background in prototyping, validation and verification of electronic products
Proven experience leading high-volume product development projects
Ability to relocate to, or be based full-time in, Amsterdam
To apply for this Senior Electronics Design Engineer position based in Amsterdam, Netherlands, please send your CV to NDrain@redlinegroup.Com Or call +44 (0)1582 878828 to speak with Nick. ....Read more...
Type: Permanent Location: Amsterdam, Netherlands
Start: ASAP
Salary / Rate: £45000 - £80000 per annum
Posted: 2026-01-21 15:30:33
-
We are partnered with a growing business building specialist electronics systems used in demanding industrial and scientific applications.
They are looking for a FPGA Design Engineer to build products that are high performance, reliable, and built to solve real-world challenges for global customers.
In this FPGA Design Engineer role, you will:
Develop FPGA solutions for high-speed imaging and data capture
Own FPGA tasks across new product designs, from initial concept to verification and support
Work closely with hardware, software, and systems engineers to deliver production-ready designs
Input into system architecture, specs, and ongoing improvements across the product range
The ideal FPGA Design Engineer will have:
Experience designing FPGAs
Hands-on background in high-speed digital or data-heavy systems
Strong electronics or engineering foundation with a practical mindset
Interest in imaging, embedded systems, or technically demanding hardware
The role comes with a competitive salary, benefits, bonus potential, opportunity for flexible working, and plenty of scope to make a real impact.
To apply for this FPGA Design Engineer role, click apply, send your CV to efrost@redlinegroup.Com or call Ed on 01582 878819. ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Salary / Rate: £45000 - £75000 per annum
Posted: 2026-01-20 17:09:46
-
Are you a Senior Verification & Validation Engineer looking to work on technically challenging products in a safety-critical environment?
We're partnering with a well-established, innovative organisation specialising in advanced safety and detection technologies, based in Cambridge, looking for a talented Senior Verification & Validation Engineer to support both current and next-generation product development.
As a Senior Verification & Validation Engineer, you will take responsibility for defining, delivering and continuously improving V&V activities across the product lifecycle, ensuring products meet performance, quality and regulatory requirements.
Key skills & experience for Senior Verification & Validation Engineer, based Cambridge:
Proven experience in V&V ideally within highly regulated or safety-critical industries
Strong hands-on experience with hardware testing and automated test environments
Working knowledge of test equipment such as oscilloscopes, analysers, signal generators and environmental chambers
Experience using Python, LabVIEW or similar scripting languages for test automation
Proven ability to develop, own and challenge processes
Onsite role with some WFH flexibility available.
This is an exciting opportunity to join a leading organisation who can offer the opportunity for career progression and personal development.
To apply for Senior Verification & Validation Engineer, based in Cambridge, please send your CV and covering letter to rwilcocks@redlinegroup.Com, or call Ricky Wilcocks on 01582 878810.
Ref: RSP1278 ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Salary / Rate: £55000 - £65000 per annum
Posted: 2026-01-19 17:19:40
-
Mechanical Engineer
Location: Horsham
Salary: £35,000 £45,000
An opportunity has arisen for an experienced Mechanical Engineer to join a growing design and manufacturing business specialising in precision rotary mechanisms for surveillance and fire-control solutions in the defence and highâtechnology sectors.
The role is ideal for an engineer who enjoys taking ownership of concepts and turning them into robust, manufacturable products for use in harsh environments.
The Role
- Design innovative electroâmechanical mechanisms and precision machinery from concept through to production.
- Perform classical engineering analysis (stress, fatigue, vibration), using both hand calculations and computer-based simulation tools.
- Produce detailed engineering and assembly drawings for manufacture and support verification testing in the lab to ensure designs meet specifications.
- Prepare and contribute to engineering reports, including new product design justifications and failure investigations.
- Work closely with electronics, control and drive engineers to integrate multiâdiscipline systems into complete equipment solutions.
- Provide engineering support to production, test and field service teams, and assist sales with technical input for bids and quotations.
- Create and develop 3D CAD models and drawings using SolidWorks.
Skills & Experience
Essential
- 2+ years experience in a mechanical engineering role.
- Proven track record designing complex mechanisms and structures for harsh environments (ideally defence or similarly demanding sectors).
- Experience taking systems from original specification and concept through to production release.
- Ability to analyse and design components such as gear drives, bearings and motor interfaces.
- Good understanding of machining, casting, fabrication and moulding manufacturing processes.
- Proficient user of SolidWorks (3D CAD).
To find out more please contact Max Sinclair - max@holtengineering.co.uk
....Read more...
Type: Permanent Location: Horsham,England
Start: 19/01/2026
Salary / Rate: £35000 - £45000 per annum
Posted: 2026-01-19 13:08:08
-
Senior Electrical Design Engineer
Location: Poole, Dorset
Salary: £45,000 £60,000
Senior Electrical Design Engineer
If youre a Senior Electrical Design Engineer who wants to work on products that genuinely matter, not consumer fluff, this one is worth your time.
This Senior Electrical Design Engineer role sits at the heart of complex, safety-critical product development used in demanding maritime and defence environments where reliability is everything.
This is not a siloed drawing-office role.
As a Senior Electrical Design Engineer, youll be leading from the front, influencing design direction, mentoring engineers around you, and seeing products through from early concept to manufacture and beyond.
The role:
- Lead electrical design activities across full product lifecycles, from initial concept through to production support.
- Ensure designs meet customer expectations, regulatory requirements, and robust internal engineering standards.
- Own technical delivery on projects, balancing quality, cost, and timescales.
- Act as a technical authority, supporting and mentoring junior and mid-level engineers.
- Work closely with mechanical, manufacturing, verification, and commercial teams to deliver right-first-time solutions.
- Provide technical input to bids, new product development, and future roadmap planning.
- Step into a Design Project Leader role when required, guiding technical direction and motivating the wider team.
What theyre looking for:
- Degree-qualified in Electrical Engineering (or closely related).
- Strong experience using electrical CAD tools, MRP/PLM systems, and Microsoft Office.
- Solid understanding of electrical design best practice, verification techniques, and applicable standards.
- A proven background delivering complex engineering projects end-to-end.
- Confident communicator with the ability to influence, mentor, and lead.
This Senior Electrical Design Engineer position offers the chance to work on technically interesting products with long lifecycles, real-world impact, and engineering challenges that dont get solved with shortcuts.
If this Senior Electrical Design Engineer role sounds right for you, call or message Ian at Holt Engineering on 07734 406 996.
....Read more...
Type: Permanent Location: Poole,England
Start: 19/01/2026
Salary / Rate: £45000 - £60000 per annum
Posted: 2026-01-19 11:02:04
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities.
Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods.
Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring.
Assist with New Employee Orientation including PSM initial training and HAZWOPER.
Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation.
Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary.
Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling.
Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions.
Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's.
Works with all personnel at the facility to make sure all applicable regulations related to the PSM program.
Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters.
Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance
Maintain and update Process Safety Information (PSI), including:
P&ID documentation
Pressure relief device calculations
Chemical hazard information
Conduct and document Process Hazard Analyses (PHAs).
Ensure Management of Change (MOC) procedures are properly implemented and completed.
Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC).
Assist in emergency shutdown procedure training and deviation correction protocols.
Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described.
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge.
Demonstrated organization, facilitation, communication and presentation skills.
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines.
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally.
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management.
Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance.
This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear.
The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs.
This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR.
Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures.
Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-01-17 22:07:55
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities.
Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods.
Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring.
Assist with New Employee Orientation including PSM initial training and HAZWOPER.
Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation.
Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary.
Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling.
Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions.
Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's.
Works with all personnel at the facility to make sure all applicable regulations related to the PSM program.
Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters.
Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance
Maintain and update Process Safety Information (PSI), including:
P&ID documentation
Pressure relief device calculations
Chemical hazard information
Conduct and document Process Hazard Analyses (PHAs).
Ensure Management of Change (MOC) procedures are properly implemented and completed.
Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC).
Assist in emergency shutdown procedure training and deviation correction protocols.
Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described.
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge.
Demonstrated organization, facilitation, communication and presentation skills.
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines.
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally.
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management.
Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance.
This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear.
The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs.
This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR.
Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures.
Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-01-17 22:07:49
-
We are looking for a Head of IC Design Development to lead our digital engineering team focused on next-generation capacitive touch controllers and automotive microcontrollers (MCUs).
This is a senior role with technical and managerial responsibilities, offering the chance to shape product strategy, define digital architecture, and directly influence the delivery of cutting-edge semiconductor solutions.
This is an exciting opportunity to work across global teams, collaborating with system architecture, research, software, sensor, analogue, and test & reliability teams in multiple regions, helping bring innovative ICs from concept to validated silicon.
Key Responsibilities for the Head of IC Design in Fareham,
Lead the definition and development of digital requirements from product specifications.
Oversee digital architecture, design, verification, and validation of capacitive touch controller ICs and automotive MCUs.
Manage the digital engineering team, including resource planning, goal setting, performance monitoring, and budget oversight.
Mentor and coach IC development engineers, sharing design expertise across the broader engineering community.
Collaborate with internal and external IP suppliers, ensuring quality, functionality, and successful integration.
Evaluate and select EDA tools for design, test, verification, and physical implementation.
Provide technical guidance to improve product performance, cost-effectiveness, and reliability.
Ensure IC designs comply with low-power, safety, and high-reliability standards.
Requirements for the Head of IC Design in Fareham
BEng or MEng in Engineering, Electronics, or a related discipline (upper second class or equivalent).
5+ years' experience in digital or mixed-signal IC design, preferably ASICs.
1+ years' experience managing or leading a team.
Strong expertise in the full digital design process from specification to validated silicon.
Knowledge of low power design, power management, area analysis, and DfT/DfM methodologies.
Experience with IP integration, silicon debug, and failure analysis.
Excellent communication, problem-solving, and decision-making skills, with ability to work effectively across global teams.
Desirable:
Mixed-signal IC design experience.
Familiarity with JIRA and Confluence for project tracking and documentation.
Experience in the touch sensing industry or with display drivers (DDI).
Knowledge of ISO-26262 functional safety or similar high-reliability standards.
Python scripting for automation and design efficiency.
Why Join Us:
Real impact: Contribute to innovative products and directly influence IC development outcomes.
Growth and development: Access mentorship, challenging projects, and professional skill development.
Balanced culture: Supportive and enjoyable workplace with a focus on work-life balance.
Hybrid working: Flexible schedule with office presence as needed.
Health & wellbeing support: Access to mental health, wellbeing services, and confidential financial and legal advice.
Apply today to join a team shaping the next generation of touch sensing and automotive ICs.
If you are keen please send over an updated cv to nking@redlinegroup.Com or call 01582 878839 to discuss in more detail. ....Read more...
Type: Permanent Location: Fareham, England
Start: ASAP
Salary / Rate: £65000 - £87000 per annum
Posted: 2026-01-16 16:43:03
-
An exciting opportunity has arisen for a Senior Electronics Engineer to join a Cambourne, Cambridgeshire based market-leading manufacturer of specialist fire detection systems.
Their innovative products are trusted globally in high-stakes environments such as museums, warehouses, theatres, and even commercial aviation.
As a Senior Electronics Design Engineer, you will play a pivotal role in leading and mentoring a team of talented engineers.
You'll bring technical expertise, strategic insight, and a passion for delivering exceptional electronic designs that make a tangible difference in the real world.
Key Responsibilities of this Cambourne, Cambridgeshire based Senior Electronics Design Engineer job:
Lead the design and development of complex analogue and digital electronic circuits, including schematic capture, component selection, and design reviews.
Provide hands-on technical leadership throughout the entire electronics product lifecycle — from concept, feasibility, and design, through to prototyping, testing, certification (including ATEX), and production handover.
Ensure robust designs suitable for high-reliability and safety-critical applications, including high-risk and ATEX-certified environments.
Plan, manage, and oversee project delivery, ensuring alignment with technical and commercial objectives.
Skills & Experience Required for this Senior Electronics Design Engineer job:
Proven experience in analogue and digital circuit design, including schematic capture and verification using tools like Altium 365
Strong senior-level background with project ownership, team leadership, and mentoring responsibilities.
Industry experience with regulated or high-risk products ideally including ATEX or other safety-critical standards
Degree-qualified in Electronics, Electrical Engineering, or a closely related discipline
This is a fantastic opportunity to join a forward-thinking Cambourne, Cambridgeshire based business that values innovation, continuous improvement, and the development of its people—all while delivering life-saving technology.
If this could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471 181784. ....Read more...
Type: Permanent Location: Cambourne, England
Start: ASAP
Salary / Rate: £60000 - £70000 per annum
Posted: 2026-01-16 16:18:59
-
Power Electronics Engineer — Medium Power (100 W-10 kW)
Clevedon, Somerset
Our client is seeking an experienced Power Electronics Engineer to join their engineering team, contributing to the design and development of advanced medium-power electronic systems.
This role offers hands-on involvement across the full product lifecycle, working on power conversion, control electronics, and embedded systems typically in the 100 W-10 kW range.
You will work closely with multidisciplinary teams to deliver robust, production-ready designs for modern electrical and industrial applications.
Key Responsibilities:
Design and develop medium-power electronics (100 W-10 kW) including:
Power conversion stages
Analog and digital control circuitry
Signal conditioning and feedback systems
Produce high-quality schematic designs, component selection, and multi-layer PCB layouts.
Perform simulation, prototyping, debugging, and verification testing.
Support new product introduction from concept through production.
Collaborate with test, manufacturing, and service teams to ensure reliable and manufacturable designs.
Contribute to continuous improvement of design processes and product performance.
Ensure compliance with ISO9001, ISO14001, EMC requirements, and relevant safety standards.
Qualifications & Experience
Degree in Power Electronics, Electronics Engineering, Embedded Systems, or equivalent.
Strong background in hardware and power electronics design, including: Analog and digital circuit design, Power supply and converter design, High-quality PCB layout (OrCad preferred)
You can be experienced from 1 year all the way through to Senior level.
This position offers a rare balance between hands-on power electronics design, analog engineering, and real-world medium-power systems, making it ideal for engineers who enjoy working across both control electronics and power hardware.
Please send your CV to ndrain@redlinegroup.Com Or call 01582878828 to speak with Nick Drain for more information. ....Read more...
Type: Permanent Location: Clevedon, England
Start: ASAP
Salary / Rate: £45000 - £65000 per annum
Posted: 2026-01-15 16:59:23
-
Industrialisation Test Engineer - London (Greenwich) - £35-40 per hour (Umbrella) - Temp to Permanent
About the Role:
We are delighted to invite applications for the role of Industrial Test Engineer to join our client's diverse and inclusive team.
In this role, you will support the industrialisation and launch of new high-reliability products by developing innovative test solutions and providing technical support to production.
You will work closely with teams across R&D, Production, Quality, and external suppliers to ensure our products meet the highest standards of quality, safety, and reliability.
Why Join Us?
Work as part of an innovative, supportive, and diverse team delivering high-reliability products.
Thrive in a culture that values equity, diversity, inclusion, and wellbeing.
Access opportunities for professional development and career progression.
Receive a competitive salary and benefits package.
Responsibilities:
Design, install, commission, and integrate hardware and software for test benches.
Develop comprehensive test documentation including instructions, specifications, drawings, and verification plans.
Collaborate with Health & Safety teams to ensure test solutions meet safety standards.
Deliver new test solutions to production teams and provide ongoing technical support.
Liaise with Submerged Equipment Design (SED) and Technical Leaders to resolve test failures and product performance issues.
Provide hands-on debugging and support for test systems during manufacturing.
Train and support manufacturing staff on new test processes and equipment.
Maintain and update databases related to test software and equipment, and report on progress to technical leadership.
What you need for the job:
Degree in Electronics, Optical, Software Engineering, or a related discipline.
Proven experience in test development within a production environment.
Proficiency in developing and maintaining test programs using National Instruments LabVIEW and TestStand.
Experience designing and applying production test equipment.
Understanding of electromechanical production processes.
Experience with fibre optics or high/low voltage testing is advantageous.
....Read more...
Type: Contract Location: Greenwich, England
Salary / Rate: Umbrella
Posted: 2026-01-15 11:17:16
-
Industrialisation Test Engineer - London (Greenwich) - up to £52,000 + Bonus + Ex.
Benefits - PermanentAbout the Role:We are delighted to invite applications for the role of Industrial Test Engineer to join our client's diverse and inclusive team.
In this role, you will support the industrialisation and launch of new high-reliability products by developing innovative test solutions and providing technical support to production.You will work closely with teams across R&D, Production, Quality, and external suppliers to ensure our products meet the highest standards of quality, safety, and reliability.Why Join Us?, Work as part of an innovative, supportive, and diverse team delivering high-reliability products., Thrive in a culture that values equity, diversity, inclusion, and wellbeing., Access opportunities for professional development and career progression., Receive a competitive salary and benefits package.Responsibilities:, Design, install, commission, and integrate hardware and software for test benches., Develop comprehensive test documentation including instructions, specifications, drawings, and verification plans., Collaborate with Health & Safety teams to ensure test solutions meet safety standards., Deliver new test solutions to production teams and provide ongoing technical support., Liaise with Submerged Equipment Design (SED) and Technical Leaders to resolve test failures and product performance issues., Provide hands-on debugging and support for test systems during manufacturing., Train and support manufacturing staff on new test processes and equipment., Maintain and update databases related to test software and equipment, and report on progress to technical leadership.Requirements:, Degree in Electronics, Optical, Software Engineering, or a related discipline., Proven experience in test development within a production environment., Proficiency in developing and maintaining test programs using National Instruments LabVIEW and TestStand., Experience designing and applying production test equipment., Understanding of electromechanical production processes., Experience with fibre optics or high/low voltage testing is advantageous.Working Hours37.5 hours per week - Shift: 06:00 to 14:30, with flexibility based on production needs.How to apply:To apply for this opportunity, please send me your CV or contact Rob Hutchings at 02392 314679. ....Read more...
Type: Permanent Location: Greenwich, England
Salary / Rate: £50000 - £52000 per annum + + Bonus + Ex. Benefits
Posted: 2026-01-15 10:59:24
-
Were looking for an experienced Programme Engineering Manager to take charge of complex work packages for next-generation flight simulators.
This is a unique opportunity to work at the forefront of flight simulation, leading multidisciplinary teams and ensuring that advanced software-driven systems are delivered on time, to specification, and in compliance with aerospace standards.
If you thrive in fast-paced environments, have proven success managing technical projects, and are passionate about shaping the future of aerospace training, this role is for you.
What Youll Do
- Lead cross-functional engineering teams with a strong emphasis on software development, testing, and integration.
- Take full ownership of work packages, ensuring delivery against scope, budget, and timelines.
- Oversee the delivery of software components for flight simulators, ensuring seamless integration with hardware and systems.
- Implement robust technical governance frameworks to ensure compliance with aerospace software standards.
- Drive risk management throughout the development lifecycle, mitigating issues before they impact delivery.
- Collaborate with internal stakeholders and external customers to align on requirements, milestones, and deliverables.
What Were Looking For
- Degree in Engineering, Computer Science, Software Engineering, Aerospace, or a related discipline.
- Proven experience as a Work Package Owner, Delivery Manager, Programme Manager, or Technical Lead within aerospace or simulation projects.
- Strong understanding of engineering lifecycles, including development, verification, validation, and integration.
- Experience leading multi-disciplinary teams.
- Excellent project management, technical governance, and stakeholder engagement skills.
- Background in flight simulation, avionics, or complex aerospace software systems is highly desirable.
- Knowledge of aerospace software standards is highly desirable.
Why Join?
- Competitive Salary + Annual Bonus
- 25 days holiday + bank holidays (with buy/sell options)
- Private medical insurance (with family cover options)
- Pension scheme with up to 7% employer contribution
- Life assurance (4x salary, up to 10x available)
- Group income protection
- Flexible benefits including dental, healthcare cash plan, gym membership & cycle to work
- Wellbeing and mental health support (Employee Assistance Programme)
- Subsidised restaurant and on-site parking with EV charging
- Excellent learning & development opportunities
Applicants must have the right to work in the UK.
If youre ready to take ownership of high-impact engineering projects, apply now! ....Read more...
Type: Permanent Location: West Sussex,England
Start: 15/01/2026
Salary / Rate: £75000 - £90000 per annum, Benefits: Annual bonus & more!
Posted: 2026-01-15 09:34:04
-
The Test Engineer will join a Systems Engineering team critical in space thruster engine development.
You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components.
This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop.
Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc.
Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 Per Annum None
Posted: 2026-01-15 09:28:24
-
Quality Verification Engineer required for an leading precision engineering company, serving industries such as Nuclear, Oil & Gas, Food & Beverage and Chemical Processing with critical components from multiple global locations including 4 UK sites.This opportunity is based in Huddersfield, meaning the successful Quality Verification Engineer will be able to commute from surrounding areas.Key Responsibilities of the Quality Verification Engineer will include;
Produce Quality Verification and final release documents of products
Review product certifications against quality plans and technical drawings
Liaise with Quality Engineering teams to discuss process improvement opportunities and any technical compliance issues
Develop and maintain a standardised approach to quality documentation
Raise non-conformance reports
Support the Quality department with improvement activities as required
For the role of Quality Verification Engineer we are keen to receive applications from individuals who have;
Experience with Quality documentation and certification within an engineering and manufacturing environment
The ability to interpret technical drawings, material specifications and quality standards
The ability to work to deadlines and manage multiple quality documents
Salary & Benefits on offer for the successful Quality Verification Engineer;
Competitive salary (depending on experience)
26 Days annual leave + Bank holidays
Up to 8% employer contributions
Mon - Thur 8am - 4.30pm
Fri - 8am - 1pm
Enhanced company sick pay
Optical vouchers, employee assistance, Discounts, cash back and offers
To apply for the Quality Verification Engineer position, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £10000 - £100000 per annum
Posted: 2026-01-15 09:11:00
-
Senior Mechanical Design Engineer
Location: Lincoln, Lincolnshire, UK
An excellent opportunity for an experienced Senior Mechanical Design Engineer to join a global RF technology group as part of a specialist R&D team in the UK.
This role focuses on designing and developing advanced mechanical solutions for RF, antenna, and electronic systems used across aerospace, defence, naval, space, and medical applications.
This position is ideal for a highly motivated and innovative engineer with extensive experience in mechanical design for demanding environments, who thrives on solving complex technical challenges and working collaboratively with multidisciplinary teams across international sites.
Main Responsibilities of the Senior Mechanical Design Engineer based in Lincoln, UK:
Lead and contribute to the mechanical design of RF, antenna, and system products from concept through CAD, prototyping, fabrication, and final assembly.
Collaborate closely with RF and electronics engineers to optimise designs for challenging applications and integrate systems effectively.
Produce detailed CAD models, drawings, and analysis for strength, vibration, thermal behaviour, environmental performance, and compliance with military standards (e.G., MIL-STD-810).
Support proposal generation with concept CAD, analysis, and presales input.
Develop and optimise prototypes, models, fixtures, and specialised test equipment.
Oversee environmental and mechanical testing, verification, and product qualification.
Work directly with suppliers and manufacturing partners to ensure high-quality fabrication and testing.
Industrialise designs and manage handover to production, including documentation, training, and assembly instructions.
Produce technical reports, customer-facing documentation, and participate in design reviews with customers.
Requirements of the Senior Mechanical Design Engineer based in Lincoln, UK:
Bachelor's degree in Mechanical Engineering (Master's preferred).
Extensive experience in mechanical product design, ideally within defence, aerospace, naval, or space applications.
Proven ability to deliver designs from concept to CAD, fabrication, and final assembly.
Experience in design for environmental requirements including vibration, shock, humidity, and ingress protection.
Strong expertise in environmental qualification, product testing, and verification.
Mastery of CAD tools (e.G., Solidworks, Autodesk Inventor).
Knowledge of composites, structures, aerospace, robotics, or electromechanical systems.
Practical experience in prototyping, machining, and assembly.
Experience working with suppliers, machinists, and toolmakers.
Proven track record of working directly with customers in a consultative and collaborative manner.
Excellent problem-solving skills, resilience, and attention to detail.
Desirable Experience:
Shipborne, maritime, or space-related equipment.
Thermal, ingress, corrosion, and EMC considerations in enclosure design.
Mechanical design of healthcare-related products.
Experience with FEA tools and MATLAB.
To apply for this Senior Mechanical Design Engineer role based in Lincoln, UK, please send your CV to: kchandarana@redlinegroup.Com or call 01582 878 830 / 07961 158 784 ....Read more...
Type: Permanent Location: Lincolnshire, England
Start: ASAP
Salary / Rate: £75000 - £90000 per annum
Posted: 2026-01-15 00:00:03
