-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Vat Washers ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY:
Cleans interior of batch processing tanks and vats to remove residue left after batches are filled off into containers.
Maintain used "wash" drums and account for used cleaning solvent (wash).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Drain tank/vat of remaining batch material
Scrape and/or scrub interior of tank/vat to remove residue
Use appropriate cleaning solvent to clean tank/vat
Remove residue and cleaning solvent from tank/vat with squeegees, pump and/or suction hoses
Dry tank/vat
Inspect tank/vat to ensure no chance of contamination before authorizing tank/vat for use
Empty used cleaning solvent into appropriate used wash drum
Maintain used wash drum area by tracking amount of wash in drum and replacing filled drums
Apply proper labeling to empty wash drums to prepare for use
Maintain log of used cleaning solvents (wash)
Assist in Filling area as needed
Maintain neat and orderly work area
QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math/measurement skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability: Ability to determine correctness of tank/vat cleaning and filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is provided.
The employee is frequently exposed to wet and/or humid conditions and moving mechanical parts.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of tanks/vats cleaned
Accuracy of required paperwork
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:37
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for MRT Filling Attendants.
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
Pay: From $16.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Day Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:36
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Batch Makers (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned.
Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket.
Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc.
Upon batch completion, take product sample to QC Lab for QC checks.
Check production batches by comparison to standards
Make adjustments to batch as necessary
Recheck batch after adjustments are made until product is within standard product specifications
Use proper analytical tools to compare product to standard specs and to wet and/or dry samples
Record results of comparison and record onto batch card
Consult with Main Lab chemist on products more than 10% out of product specifications
Upon approval of product record data onto Quality Control car and enter information into computer data base
Consult QC manual for specific requirements for product analysis of production batches and customers special requirements
Calibrate QC equipment as required
Other duties as assigned by supervisor/manager
Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required
Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills
Good written and verbal communication skills
Basic reading and comprehension skills
Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use.
Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule.
Accuracy of completed batches.
Satisfactory appearance of work area.
Attendance and attitude.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:35
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Material Handlers ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Move materials with forklift to appropriate locations within department and around facility.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check inventory of machine tape, hot glue, UPC labels, box labels, ribbons, pallets, etc.
Order materials and maintain supplies necessary for the daily running of materials, such as cans, boxes, lids, pallet ship sheets, etc.
Maintain supplies for filling line, such as empty cans, boxes, etc.
and operate forklift to manage supply of materials to line
Move full pallets of finished material to pallet wrappers and wrap with shrink wrap.
Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous forklift experience preferred
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions.
Work without continuous supervision and complete assigned projects.
CERTIFICATES, LICENSES, REGISTRATIONS: Must be able to obtain forklift license.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employee operates forklift for most of shift.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of units produced
Appearance of work areaApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:35
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for DC Order Selectors.
$1,000 Sign-On Bonus!
GENERAL SUMMARY:Select items from inventory flow racks to fill customer orders.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain flexibility in daily line station assignments.
Maintain 100% order accuracy.
Maintain neat and orderly work area.
Communicate with inventory stocker item bins that are near empty for re-stocking.
Check items selected and inform management of damaged or missing products.
Submit complete and accurate paperwork in a timely manner obtaining proper signatures.
Always demonstrate professional customer service skills.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma or equivalent preferred
Basic math skills
Basic reading and comprehension skills
Specific Knowledge, Skills, and Abilities Required
Warehouse, pick and pack operation experience preferred
Ability to identify products by item markings
Ability to work quickly and efficiently with interruptions and on repetitive tasks
Customer service oriented
Reasoning Ability: Ability to determine correctness of order selection process in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform essential functions.
While performing the essential functions of this job the employee is regularly required to stand, reach, handle, twist and/or turn, talk, see and hear.
The employee is frequently required to bend, squat, stoop and lift and move up to 45-50 pounds.
The employee occasionally is required to sit, walk, lift, carry, push, pull, climb and kneel.
WORK ENVIRONMENT: The work environment is representative of those an employee would encounter in a normal warehouse environment with exposure to both heat and cold.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI):
Picking Accuracy %
Number of selections per hour
Attitude
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:32
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Fill Off Attendants (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:31
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Fill Off Attendants ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled
Accuracy of filling
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:31
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Vat Washers (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Cleans interior of batch processing tanks and vats to remove residue left after batches are filled off into containers.
Maintain used "wash" drums and account for used cleaning solvent (wash).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Drain tank/vat of remaining batch material
Scrape and/or scrub interior of tank/vat to remove residue
Use appropriate cleaning solvent to clean tank/vat
Remove residue and cleaning solvent from tank/vat with squeegees, pump and/or suction hoses
Dry tank/vat
Inspect tank/vat to ensure no chance of contamination before authorizing tank/vat for use
Empty used cleaning solvent into appropriate used wash drum
Maintain used wash drum area by tracking amount of wash in drum and replacing filled drums
Apply proper labeling to empty wash drums to prepare for use
Maintain log of used cleaning solvents (wash)
Assist in Filling area as needed
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:26
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Filling Line Operators.
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions.
Set up all equipment on filling line and make changeovers for filling new batch ticket orders.
Review finished order for final counts on product and fill rates.
Maintain neat and orderly work area.Pay: From $16.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
No experience necessary
Fill off experience preferredShift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:26
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Batch Makers ($2 Shift Differential.
$1,000 Sign On Bonus!
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry.
Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet
Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashionJob Type: Full-time
Pay: From $19.50 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Manufacturing: 3 years (Preferred)
Mixing/Batch Making: 1 year (Preferred)Shift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:24
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for DC Order Selectors.
$1,000 Sign-On Bonus!
GENERAL SUMMARY:Select items from inventory flow racks to fill customer orders.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain flexibility in daily line station assignments.
Maintain 100% order accuracy.
Maintain neat and orderly work area.
Communicate with inventory stocker item bins that are near empty for re-stocking.
Check items selected and inform management of damaged or missing products.
Submit complete and accurate paperwork in a timely manner obtaining proper signatures.
Always demonstrate professional customer service skills.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma or equivalent preferred
Basic math skills
Basic reading and comprehension skills
Specific Knowledge, Skills, and Abilities Required
Warehouse, pick and pack operation experience preferred
Ability to identify products by item markings
Ability to work quickly and efficiently with interruptions and on repetitive tasks
Customer service oriented
Reasoning Ability: Ability to determine correctness of order selection process in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform essential functions.
While performing the essential functions of this job the employee is regularly required to stand, reach, handle, twist and/or turn, talk, see and hear.
The employee is frequently required to bend, squat, stoop and lift and move up to 45-50 pounds.
The employee occasionally is required to sit, walk, lift, carry, push, pull, climb and kneel.
WORK ENVIRONMENT: The work environment is representative of those an employee would encounter in a normal warehouse environment with exposure to both heat and cold.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI):
Picking Accuracy %
Number of selections per hour
Attitude
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:22
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Batch Makers (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned.
Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket.
Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc.
Upon batch completion, take product sample to QC Lab for QC checks.
Check production batches by comparison to standards
Make adjustments to batch as necessary
Recheck batch after adjustments are made until product is within standard product specifications
Use proper analytical tools to compare product to standard specs and to wet and/or dry samples
Record results of comparison and record onto batch card
Consult with Main Lab chemist on products more than 10% out of product specifications
Upon approval of product record data onto Quality Control car and enter information into computer data base
Consult QC manual for specific requirements for product analysis of production batches and customers special requirements
Calibrate QC equipment as required
Other duties as assigned by supervisor/manager
Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required
Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills
Good written and verbal communication skills
Basic reading and comprehension skills
Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use.
Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule.
Accuracy of completed batches.
Satisfactory appearance of work area.
Attendance and attitude.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:22
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Fill Off Attendants ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled
Accuracy of filling
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:20
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Aerosol Line Operators (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions.
Set up all equipment on filling line and make changeovers for filling new batch ticket orders.
Review finished order for final counts on product and fill rates.
Maintain neat and orderly work area.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Basic mechanical and machine repair skills
Prior Aerosol Line Attendant knowledge preferred
Reasoning Ability
Ability to determine correct processes regarding standard aerosol filling procedures as instructed in initial training.
Ability to determine and make basic mechanical adjustments and know when additional assistance is needed.
The ability to work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand and use hands to grasp, handle or feel.
The employee is occasionally required to walk, bend, stoop, talk and/or hear.
Employee must regularly lift and/or move up to 20 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is regularly exposed to moving mechanical parts and occasionally to wet and/or humid conditions.
The noise level in the work environment is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced online each day
Accuracy of units produced
Proper maintenance of equipment
Appearance of work area.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:18
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Filling Line Operators (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc.
Assist operator in changing filing line components from run to run
Check application of lids on containers and manually tighten any loose lids
Print and apply labeling to filled boxes
Box and palletize finished product
Complete tracking forms and attach to pallets
Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions.
Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily
Accuracy of units produced
Appearance of work areaApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:17
-
JOB DESCRIPTION
$1,000 Sign on Bonus
RPM Industrial Coatings Group in Hudson, NC is looking for Batch Makers/Mixer Techs.
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry.
Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet
Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashionJob Type: Full-time
Pay: From $17.50 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Manufacturing: 3 years (Preferred)
Mixing/Batch Making: 1 year (Preferred)Shift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:15
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Vat Washers ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY:
Cleans interior of batch processing tanks and vats to remove residue left after batches are filled off into containers.
Maintain used "wash" drums and account for used cleaning solvent (wash).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Drain tank/vat of remaining batch material
Scrape and/or scrub interior of tank/vat to remove residue
Use appropriate cleaning solvent to clean tank/vat
Remove residue and cleaning solvent from tank/vat with squeegees, pump and/or suction hoses
Dry tank/vat
Inspect tank/vat to ensure no chance of contamination before authorizing tank/vat for use
Empty used cleaning solvent into appropriate used wash drum
Maintain used wash drum area by tracking amount of wash in drum and replacing filled drums
Apply proper labeling to empty wash drums to prepare for use
Maintain log of used cleaning solvents (wash)
Assist in Filling area as needed
Maintain neat and orderly work area
QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math/measurement skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability: Ability to determine correctness of tank/vat cleaning and filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is provided.
The employee is frequently exposed to wet and/or humid conditions and moving mechanical parts.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of tanks/vats cleaned
Accuracy of required paperwork
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:14
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and communicates variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects in D365.
Expedites and follows up changes to allow for prescribed quality standards.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check production batches by comparison to standards
Advise batchmaker of any necessary adjustments to apply to product batch
Recheck batch after adjustments are made until product is within standard product specifications
Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples
Record results of comparison in D365
Consult with QC manager on products more than 10% out of product specifications
Upon approval of product record data in D365
Check bulk raw materials against standard product specifications upon receipt
Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials
Calibrate QC/QA equipment as required
Other duties as assigned by supervisor/manager
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma
Proficient math and written communication skills
Good computer skills - knowledge of Excel required
Up to three years in industry related QC field helpful
Prior batchmaking experience helpful
Specific Knowledge, Skills, and Abilities Required
Successful completion of Munsel Color test, helpful
Familiarity with products used in batchmaking processes
Familiarity with standard analytical tools
Reasoning Ability
Employee must work with limited supervision following written and verbal instructions.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
Occasional lifting and/or carrying of up to 40 lbs.
Is required.
Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping.
WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory.
Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present.
The company provides any required personal protective equipment.
KEY PERFORMANCE INDICATORS (KPI)
Turnover of correct production batches
QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:09
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Batch Makers ($2 Shift Differential.
$1,000 Sign On Bonus!
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry.
Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet
Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashionJob Type: Full-time
Pay: From $19.50 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Manufacturing: 3 years (Preferred)
Mixing/Batch Making: 1 year (Preferred)Shift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:05
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and communicates variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects in D365.
Expedites and follows up changes to allow for prescribed quality standards.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check production batches by comparison to standards
Advise batchmaker of any necessary adjustments to apply to product batch
Recheck batch after adjustments are made until product is within standard product specifications
Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples
Record results of comparison in D365
Consult with QC manager on products more than 10% out of product specifications
Upon approval of product record data in D365
Check bulk raw materials against standard product specifications upon receipt
Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials
Calibrate QC/QA equipment as required
Other duties as assigned by supervisor/manager
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma
Proficient math and written communication skills
Good computer skills - knowledge of Excel required
Up to three years in industry related QC field helpful
Prior batchmaking experience helpful
Specific Knowledge, Skills, and Abilities Required
Successful completion of Munsel Color test, helpful
Familiarity with products used in batchmaking processes
Familiarity with standard analytical tools
Reasoning Ability
Employee must work with limited supervision following written and verbal instructions.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
Occasional lifting and/or carrying of up to 40 lbs.
Is required.
Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping.
WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory.
Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present.
The company provides any required personal protective equipment.
KEY PERFORMANCE INDICATORS (KPI)
Turnover of correct production batches
QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:00
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and communicates variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects in D365.
Expedites and follows up changes to allow for prescribed quality standards.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check production batches by comparison to standards
Advise batchmaker of any necessary adjustments to apply to product batch
Recheck batch after adjustments are made until product is within standard product specifications
Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples
Record results of comparison in D365
Consult with QC manager on products more than 10% out of product specifications
Upon approval of product record data in D365
Check bulk raw materials against standard product specifications upon receipt
Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials
Calibrate QC/QA equipment as required
Other duties as assigned by supervisor/manager
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma
Proficient math and written communication skills
Good computer skills - knowledge of Excel required
Up to three years in industry related QC field helpful
Prior batchmaking experience helpful
Specific Knowledge, Skills, and Abilities Required
Successful completion of Munsel Color test, helpful
Familiarity with products used in batchmaking processes
Familiarity with standard analytical tools
Reasoning Ability
Employee must work with limited supervision following written and verbal instructions.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
Occasional lifting and/or carrying of up to 40 lbs.
Is required.
Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping.
WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory.
Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present.
The company provides any required personal protective equipment.
KEY PERFORMANCE INDICATORS (KPI)
Turnover of correct production batches
QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:58
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Material Handlers ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Move materials with forklift to appropriate locations within department and around facility.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check inventory of machine tape, hot glue, UPC labels, box labels, ribbons, pallets, etc.
Order materials and maintain supplies necessary for the daily running of materials, such as cans, boxes, lids, pallet ship sheets, etc.
Maintain supplies for filling line, such as empty cans, boxes, etc.
and operate forklift to manage supply of materials to line
Move full pallets of finished material to pallet wrappers and wrap with shrink wrap.
Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous forklift experience preferred
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions.
Work without continuous supervision and complete assigned projects.
CERTIFICATES, LICENSES, REGISTRATIONS: Must be able to obtain forklift license.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employee operates forklift for most of shift.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of units produced
Appearance of work areaApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:58
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for MRT Batch Makers.
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Mix solvents and dry chemicals in the process of making dispersion batches according to instructions on batch ticket.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Weigh and/or measure specific quantities of varying type of ingredients in proper sequence and proportions
Tend mixing or compounding equipment and maintain desired control over time, heat, pressure, color or other variables.
May perform blending, filtration, drying, grinding or other related operations.
May test according to prescribed procedures and specifications.
Maintain batch, time weight, color, pressure, heat production and/or other records as required.
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashion
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No previous experience required
Experience in Manufacturing, Filling area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math and measurement skills required
Basic reading and comprehension skills required
Reasoning Ability
Ability to determine correct processes regarding standard stain batch making procedures as instructed in initial training
The ability to work without continuous supervision while completing assigned projects.
CERTIFICATES, LICENSES, REGISTRATIONS
N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 400 pounds, using provided equipment.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of completed batches
Satisfactory appearance of work area.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:58
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Vat Washers (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Cleans interior of batch processing tanks and vats to remove residue left after batches are filled off into containers.
Maintain used "wash" drums and account for used cleaning solvent (wash).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Drain tank/vat of remaining batch material
Scrape and/or scrub interior of tank/vat to remove residue
Use appropriate cleaning solvent to clean tank/vat
Remove residue and cleaning solvent from tank/vat with squeegees, pump and/or suction hoses
Dry tank/vat
Inspect tank/vat to ensure no chance of contamination before authorizing tank/vat for use
Empty used cleaning solvent into appropriate used wash drum
Maintain used wash drum area by tracking amount of wash in drum and replacing filled drums
Apply proper labeling to empty wash drums to prepare for use
Maintain log of used cleaning solvents (wash)
Assist in Filling area as needed
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:56
-
JOB DESCRIPTION
$1,000 Sign on Bonus
RPM Industrial Coatings Group in Hudson, NC is looking for Batch Makers/Mixer Techs.
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry.
Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet
Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashionJob Type: Full-time
Pay: From $17.50 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Manufacturing: 3 years (Preferred)
Mixing/Batch Making: 1 year (Preferred)Shift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:55
