-
Position: FPGA Engineer
Location: Dublin
Salary: DOE
Our client is a leading manufacturer of high-performance inertial sensors, including tactical grade, Coriolis vibratory gyroscopes and navigation grade, quartz servo accelerometers.
Innalabs offer solutions for the aerospace, subsea, marine, space, energy, industrial, civil engineering, and transportation markets.
Job Description:
Our client is seeking a FPGA Engineer to join their team.
They are seeking a highly motivated FPGA engineer to join their FPGA Team, with previous experience of architecting, designing and successfully delivering FPGA based systems.
Responsibilities:
, Specification/design FPGA blocks
, Design documentation including FPGA requirements, specifications, design descriptions, and test specifications.
, FPGA laboratory-based verification work, system integration and test.
, Support existing FPGA design verification and board test activities
, Collaborate with a multidisciplinary team on system architecture and design, providing inputs to architecture and design reviews.
, Write, simulate, and verify VHDL based FPGA designs.
, Schematic, PCB Layout support, and review.
, Proficient with scripting languages such as Python, and programming languages such as C/C++ for purposes of simulation/design environment development and laboratory test results analysis.
Requirements:
, Bachelor's and/or Master's degree in Electronic Engineering
, Strong knowledge of FPGA design flow : Verification, Synthesis, Partitioning, Place & Route, Timing Closure and Power Estimation
, Knowledge of interface protocols, memory technologies and communication interfaces (UART, SPI, I2C).
, Familiarity of electronic circuit & system design: analog, digital and power.
, Knowledge of embedded systems and processor architectures
, Experienced in the use of laboratory equipment such as Oscilloscope, Signal Generator, Signal Analyser.
, Experience with tools such as SVN & Git
, Preferred experience with VHDL and ECSS-Q-ST-60-02 - ASIC & FPGA Development design flow for space projects.
, Good communication and problem-solving skills.
, Team player
, Hardware/System debug skills
, Very proficient reading and writing in English, other languages preferable
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visa or sponsorship's already in place.
Therefore, we are unable to consider candidates who do not have full authorisation to work in Ireland.
Applications submitted without the necessary visa in place will not be considered.
If the position above is of interest to you and you would like to know more, please call Arlene today on 0860651940 in complete confidence.
AC
....Read more...
Type: Permanent Location: Dublin, Republic of Ireland
Start: asap
Posted: 2024-05-17 15:33:05
-
We are looking for an experienced Ground Support Equipment (GSE) Test Technician.
As a GSE Test Technician, you will be responsible for various tasks including hot fire testing of apogee engines, instrumentation of engines, and maintaining and upgrading the firing site.
Key Responsibilities:
Conduct hot fire testing of apogee engines.
Instrument engines and maintain firing site.
Support lead Test Engineers for site preparation and maintenance.
Handle propellant sampling, analysis, and testing.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and conduct steam boiler maintenance.
Work with and handle flight hardware, including preparation of customer flight engines for test, instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities.
Requirements:
Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field.
Previous experience in GSE testing and chemical analysis of propellants.
Proficiency in writing reports and test procedures.
Familiarity with hot fire testing, propellant handling, and pressure systems checks.
Experience with aerospace clean rooms and fuelling operations.
Ability to interpret Piping and Instrumentation Diagrams (P&IDs).
Strong understanding of high-pressure gas and fluidic systems. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £42000 Per Annum None
Posted: 2024-05-16 11:05:42
-
Calibration Technician required immediately for a permanent position in the Belfast, Northern Ireland.
Competitive salary (DoE) + excellent benefits see below.
Working circa 39 hours (Mon - Fri days) - possible flexi-time, the Calibration Engineer will be calibrating pressure, torque, dimensional and electrical instruments to in-house traceable standards.
The client will also consider candidates who have completed a relevant apprenticeship or candidates from a mechanical inspection, quality, machining, toolmaking, standards room background who have experience of using and or calibrated standard dimensional, torque and or pressure measuring equipment
Benefits:
Competitive salary (DoE)
39 hours/week (8.5 hrs Mon - Thur & 5 hrs Fri) - Possible flexible working pattern
25 days holiday plus bank hols.
Company Pension
Life Assurance
Company sick pay (following a qualifying period)
Company "perks" benefits
Medicash Health plan
Occasional O/T
Primary purpose of role: Joining the team as a Calibration Technician, you will be responsible for undertaking various calibrations to ISO9001 accredited standards in accordance with Company Procedures.
As part of the calibration process, you will be expected to maintain and produce accurate calibration records enabling the production of calibration certificates.
The successful Multi-Skilled Calibration Technician's day to day duties will include:
To calibrate dimensional and torque tools along with pressure & electrical instruments
Documenting and inputting data / results onto computer and producing calibration certificates.
Where required assist the end client with any reasonable requests sometimes at short notice.
To follow company QHSE guidelines.
Flexibility to work approved overtime if required.
Drive company van to collect / deliver clients' instruments / tooling in the local area.
To be suitable for this Calibration Technician (Electrical, Instrumentation & Mechanical) role you must have the following experience / characteristics:
Good understanding of calibration practices and theories.
Previous experience of calibrating some of the following equipment: pressure gauges, torque tooling, dimensional equipment such as mic's, verniers, various gauges etc.
Must be PC literate in MS Word and Excel and confidence to use bespoke computer software.
Must have good interpersonal communication skills, able to work as part of a team or alone with the minimum of supervision
Friendly, approachable and always striving to deliver great customer service.
Good coordination/dexterity to undertake manual adjustments on high accuracy instrumentation.
Full UK driving licence, preferably clean
The ideal Multi-skilled Calibration Engineer role will have the following experience:
Proven customer facing experience.
Completed a relevant engineering apprenticeship.
Relevant engineering qualification such as C&G / NVQ / BTEC Level 3, HNC, HND etc.
As well as dimensional, torque or pressure calibration experience, recent experience of calibrating electrical instrumentation such as DMM's / multi-meters, frequency generators, insulation testers, PAT testers would be highly advantageous.
Previous experience of calibrating to UKAS standards.
Knowledge of importing / exporting from Excel databases and report generation from databases.
Strong understanding of Windows-based and Laboratory automation software.
Key Words: Calibration, Engineer, Technician, Dimensional, Mechanical, Pressure, Torque, Electrical, Calibrate, Metrology, Toolmaker, Standards Room, Inspection, Machinist, Test and Verification, Test & Measurement, Quality, QC, Fault Finding, Calibrating, Metrology, ISO9001, UKAS, ISO17025, Manufacturing, Aerospace, Automotive, Permanent, Full Driving Licence, Belfast, Lisburn, Bangor, Newry, Armagh, County Antrim, County Down, County Armagh, Northern Ireland
This position could be right for you if you've worked / want to work as any of the following: Calibration Engineer, Calibration Technician, Inspector, Toolmaker, Conventional Machinist, Standards Room Inspector, Bench Fitter, Mechanical Fitter, Instrumentation Calibration Engineer, Electrical Calibration Technician, Instrument Technician, On-Site Field Service Calibration Engineer, Ex Forces, Calibration Team Leader or UKAS Signatory.
The successful Multi-Skilled Calibration Technician / Mechanical Calibration Engineer will need to be flexible as there may be overtime and other duties not mentioned in this job description.
With experience of working in a manufacturing environment, you will have the relevant qualifications or experience, be punctual, conscientious, keen and have a practical approach to work
The company works continuously to build a truly diverse and inclusive workforce and culture.
They welcome and encourage candidates from all aspects of diversity to apply for this role.
If you are interested in Multi-Skilled Calibration Technician / Mechanical Calibration Engineer role and have the required experience please click on the APPLY NOW button. ....Read more...
Type: Permanent Location: Belfast, Northern Ireland
Start: ASAP
Salary / Rate: £28000 - £33000 per annum + 25+8 days hol, + excellent bens
Posted: 2024-05-14 11:47:04
-
Job Opportunity: Procurement - Supply Officer
About Us: We are seeking a highly motivated Procurement - Supply Officer to join our dynamic team.
If you're a self-starter who thrives on challenges, is customer-focused, and has experience in managing supply chains, we want to hear from you.
Ideally, you're familiar with requirements planning and have worked with SAP.
Key Responsibilities: As a Supply Officer, you'll be the process operator of the "Supply External Products and Services" process, ensuring the right part is delivered to the right place at the right time and quantity according to customer needs.
Your accountabilities include:
Managing the supplier portfolio and maintaining daily supplier/customer interface.
Monitoring and improving first-tier supplier relationships.
Utilizing appropriate logistic and ordering solutions.
Supporting quality in issue resolution and New Product Introductions (NPI).
Main Activities:
Monitor and manage purchase orders to align with requirements.
Optimize ordering parameters such as safety stock, batch size, and reorder point.
Manage reordering tasks post-rejection, scrap, or damages.
Monitor delivery forecasts and interact regularly with suppliers.
Track process performance measures and KPIs.
Ensure clear communication to internal customers and initiate escalation processes when necessary.
Participate in supplier performance reviews and provide feedback.
Support troubleshooting for delivery issues, goods receipt, quality notices, and invoices.
Analyze MRP and Supply External Product exception messages.
Monitor supplier stock and support the Scrap/Sell/transfer process as needed.
Skills and Experience:
Self-motivated with a proactive approach to learning and problem-solving.
Strong customer focus and understanding of requirements planning.
Experience in managing supply chains.
Preferably experienced in using SAP.
Excellent communication and interpersonal skills.
Ability to analyze data and make informed decisions.
Strong organizational skills with attention to detail.
Qualifications:
Bachelor's degree in Business Administration, Supply Chain Management, or related field (preferred).
Previous experience in procurement or supply chain management.
Familiarity with SAP or similar procurement software.
....Read more...
Type: Contract Location: Filton, England
Salary / Rate: £19.65 - £26.00 per hour
Posted: 2024-05-13 13:47:52
-
We are currently partnering with an established and privately owned design and manufacturer of products into the Aviation industry sector to identify and recruit a QA Engineer.
This is an exciting time to be joining this established business, who have developed an extensive track record of developing and supporting a range of innovative products into the Commercial Aviation sector, including major aircraft manufacturers and operators world-wide.
The successful candidate must be capable of thorough and conscientious work to deadlines and across multiple projects, adapting to changing priorities as business needs require.
Key Responsibilities:
Assist the Quality Manager to implement Quality Control procedures and drive process improvement initiatives
Work across the business to ensure manufacturing processes and procedures are aligned with regulatory standards (AS9100, RTCA DO-160, TSO's, CAA & FAA)
Ensure all manufactured parts and products meet the above requirements
Ensure that key Quality documentation remains relevant, up-to-date, and aligned with industry standards
Risk Assessment & Mitigation in line with changes applicable to industry standards and regulation to ensure continued compliance
Ensure timely and thorough completion of Non-Conformance activities, including root-cause analysis to prevent recurrence
Key / Essential Requirements:
Educated to a minimum HND Level in a relevant Engineering discipline
Previous experience in Quality Engineer & Quality Control within a commercial Aerospace manufacturing environment
Be conversant and knowledgeable with the legislative safety requirements for Airborne Equipment / Products
Knowledge and understanding of CAA / FAA certifications & approvals
Knowledge of Technical Standard Orders
The ability to work across multi-disciplinary teams
....Read more...
Type: Permanent Location: Blackpool, England
Start: ASAP
Salary / Rate: £30000 - £38000 per annum
Posted: 2024-05-13 12:12:59
-
Test Technician required to support Test Engineers on chemical thrust cell preparation and maintenance, pressure and control systems checks, (particularly leak and pressure integrity).
Our client is an international Aerospace and Defence supplier growing their spacecraft propulsion department which serves commercial, defence and scientific markets.
Key skills
Mechanical fitting and general practical hands on engineering experience.
Ideally apprenticeship background.
High pressure gas and fluidic systems knowledge.
Attention to detail and interest in quality, speed and efficiency.
Safety-first approach
Responsibilities
Piping and Instrumentation Diagram interpretation.
Using electrical and electronic measurement and testing tools.
Space flight hardware, preparation of hardware for test, test stand installation with instruments.
Support process improvements, on site pressurant systems, panel builds, pipe bending and new propellant vessels.
Vacuum and high pressure gas system maintenance.
....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £37000 Per Annum None
Posted: 2024-05-10 18:19:11
-
Test Engineer required to to generate test equipment and testing setup requirements, with a view to performing test equipment and test set-up design of thrust systems and rocket Engineering.
Your role will include the procurement, fabrication and assembly of Test Site Propellant and Pressurant feed systems, GSE and EGSE.
You will have an excellent understanding of chemical rocket engineering, mechanical engineering and some electrical engineering the ideal candidate will have spacecraft chemical propulsion exposure.
This role would suite someone who has graduated in Mechanical, Aeronautical or Aerospace Engineering, Physics or similar with an interest in hands on practical engineering, mechanical fitter, rocket engines, fluidic control systems or any space standard experience. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £46000 Per Annum None
Posted: 2024-05-10 18:17:09
-
Aerospace and Defence Mechanical Design Engineer required to join a fast growing team focusing on fluid control systems for use on spacecraft ??? it literally is Rocket Science! The ideal candidate will have a strong interest in the design, development, industrialisation of control systems for space propulsion, (rocket engines, thrusters and Controls).
You will have a 2:1 or above in Design, Aerospace Engineering or similar with some commercial design experience for applications in space.
This is a fantastic opportunity to work on cutting edge and exciting new worldly mechanisms. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £65000 Per Annum None
Posted: 2024-05-10 18:09:06
-
Mechanical Valve Design and Development Engineer required to join growing monopropellants team working on Fluidic Controls on the design, development and industrialisation fluidic control solutions for space propulsion.
My client supplies chemical propulsion systems (rocket engines and thrusters) to spacecraft manufacturers.
Requirements
Space industry experience highly desirable but not essential.
2:1 or higher Degree in Mechanical or Aeronautical Engineering.
CAD experience generating 3D models ideally detail drafting for manufacture with PTC Creo.
Structural analysis using FE software, static and dynamic analysis justifying designs for launch vibration and fluid pressure tolerance.
Exposure to the design, manufacture and test of aerospace or space products.
Test rig design, instrumentation and data acquisition for fluid systems ideally with LabView experience.
Valve, mechanism or propulsion designs.
Clean room practices and equipment.
Responsibilities
Design of fluid system components such as electro mechanical valves and mechanisms.
Participate in customer programmes as the development engineer.
Generate technical documentation in line with company and customer Quality standards.
Create design and compliance documents using CAD, finite element, data acquisition packages, Pro Engineer, Ansys, LabView. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £36000 - £48000 Per Annum None
Posted: 2024-05-10 18:09:04
-
We are seeking a dynamic and enthusiastic individual to join our team as a Test Engineer, where you will play a crucial role in shaping the future of rocket engines, thrusters, and fluidic control systems.
In this role, you will:
Interpret higher-level design requirements to generate test equipment and test set-up specifications.
Design Test Site Propellant and Pressurant feed systems, Ground Support Equipment (GSE), and Electrical Ground Support Equipment (EGSE).
Lead the procurement, fabrication, and assembly of Test Site Propellant and Pressurant feed systems, GSE, and EGSE.
Develop equipment setup, checkout, and maintenance plans.
Create product test procedures and actively participate in product test activities.
Review and interpret higher-level requirements, generating Compliance Matrix, Design Verification Compliance Matrix against the test plan.
Skills and Competencies:
To succeed in this role, you should have:
An excellent understanding of chemical rocket engineering.
Good knowledge of mechanical engineering and basic electrical engineering.
Enthusiasm for space and space-related propulsion activities.
Ideally, a BSc degree in Mechanical, Aeronautical or Aerospace Engineering, or a BSc Degree in Physics with significant industrial experience.
Mechanical fitter or practical hands-on engineering skills, preferably gained in an engineering-related organization.
Ability to work effectively with various levels of customers and company personnel. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £45000 Per Annum None
Posted: 2024-05-10 18:07:03
-
Our client is a rapidly growing organization at the forefront of innovation in the space industry.
They specialize in the design, development, and industrialization of a diverse range of space-based propulsion applications.
They are seeking a dynamic and experienced Mechanical Design Engineer.
Responsibilities: As a Design Development Engineer, you will be responsible for the following key duties:
Designing fluid system components, including electro-mechanical valves or mechanisms.
Developing procedures for the assembly and testing of development and qualification hardware.
Generating design and compliance documents using CAD, finite element analysis.
Collaborating to support the company's commitment to safe working practices, both on-site and in design principles.
Key Requirements:
Degree in Mechanical or Aeronautical Engineering.
Minimum of 2 years' post-qualification work experience in the space industry (other sectors considered by exception).
Proven experience with CAD for generating 3D models.
Experience with test rig design, instrumentation, and data acquisition systems for fluid systems, with the ability to write detailed operating procedures.
Knowledge of the design, manufacture, and testing of aerospace or space products.
Familiarity with valve, mechanism, or propulsion designs.
....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £55000 Per Annum None
Posted: 2024-05-10 18:06:01
-
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems.
As an Engineering Technician you will work as part of a precision manufacturing team testing valve???s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £38000 Per Annum None
Posted: 2024-05-10 18:03:59
-
My client specialises in the defence industry, produces and maintains various types of weapons, materials, Aircraft emergency evacuation systems.
They are also involved in creating composite materials such as carbon fibre tubes and aero-structures.
The manufacturing engineer will be the technical owner of the process including work instructions, equipment, tooling, and other facility requirements.
Primary Responsibilities
Responsible for tooling design and documentation.
Must have the experience with 3D CAD and 2D drafting.
Provides hands-on support for manufacturing assembly of company products.
Technical writing.
Strong understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA).
Apply working knowledge of product design and assembly to the manufacturing process
Maintain equipment and tooling through coordination with maintenance team.
Coordinate and perform all necessary validation and or process engineering evaluations as needed for manufacturing equipment.
Preferred Qualifications
BS or MS in Engineering discipline or Physics.
Experience with Lean Manufacturing.
3D solid modelling experience.
Experience designing, installing, and qualifying production equipment including hand tools, fixture, and semi-automated equipment.
Familiar with typical metal working tolerances produced by milling, grinding, turning, and laser or water jet cutting.
....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum None
Posted: 2024-05-10 18:01:57
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* Part Mark and Pack Operative
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*We have a wonderful opportunity to work for a family run Global Market Leader who have been established for nearly 80 years and are based just outside of Uxbridge.We are looking for a Part Mark and Pack OperativeYou will have worked in a similar environment and gained basic production packaging experience and be able to understand and interpret technical drawings.Salary is £24K-£27K per annum + great benefits.Hours are 08.00-16.45 Monday to Thursday with a 12pm early finish on Fridays.Key responsibilities include;1.
To part mark components and assemblies using various methods (Ink Marking, Laser Engraving) in line with drawing requirements.2.
To pack parts for despatch such that:• Parts are packaged and prepared in accordance with laid down procedures.• Parts are appropriately labelled and marked and accompanied by appropriate documentation.3.
To accurately interpret assembly drawings and work instructions so that Part Numbers, Drawing Issues, relevant ADR’s, process specification and finishes can be accurately identified and applied.4.
Establish from the route card the type of information and method of marking to be used.
Obtain serial numbers from the Cell Leader or Quality department to ensure traceability of products and components.5.
To undertake self-inspection (and where authorised apply an inspector’s stamp) and quality control checks.There is fantastic training and mentorship, and you will be provided with a personalised training and development plan.Including a competitive salary other benefits include;
25 days annual leave + Bank holidays.Healthcare cash planLife assuranceA generous 9% non-contributory pension schemeCycle to work scheme.Workplace nursery benefitHighly subsidised canteen with delicious high-quality food.
If you feel you hold these skills for Part Mark and Pack Operative and this holds appeal, please get in touch today. ....Read more...
Type: Permanent Location: Uxbridge, Greater London, England
Salary / Rate: £24k - 27k per year
Posted: 2024-05-10 17:02:15
-
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*Assembly Operative
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*We have a wonderful opportunity to work for a family run Global Market Leader who have been established for nearly 80 years and are based just outside of Uxbridge.The need is for Assembly Operatives who will have previous experience working within a manufacturing environment.Salary is £29K-£31K per annum + great benefits.Hours are 08.00-16.45 Monday to Thursday with a 12pm early finish on Fridays.You will need to be extremely dextrous with a fine eye for detail as you will be assembling products with multiple complex moving parts.You will also need to be able to read technical drawings and use hand tools and gauges.Accuracy is imperative in this role, and you will need to carry out self-inspection and quality checks.You will also be expected to have some knowledge of health and safety procedures.There is fantastic training and mentorship, and you will be provided with a personalised training and development plan.Including a competitive salary other benefits include;
25 days annual leave + Bank holidays.Healthcare cash planLife assuranceA generous 9% non-contributory pension schemeCycle to work scheme.Workplace nursery benefitHighly subsidised canteen with delicious high-quality food.
Don’t miss out on this great opportunity, apply today. ....Read more...
Type: Permanent Location: Uxbridge, Greater London, England
Salary / Rate: £29k - 31k per year
Posted: 2024-05-10 16:18:54
-
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes.
The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £48000 Per Annum None
Posted: 2024-05-10 13:29:55
-
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test.
Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc.
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £41000 Per Annum None
Posted: 2024-05-10 13:24:42
-
Diagnostic Vehicle Technician Stafford - Main Dealership - £45k OTE upwards
Our client is a main dealership in Stafford and they are looking for an experienced Diagnostic Vehicle Technician to join their busy Service Department, offering a brilliant opportunity for you to be able to progress your career as a Diagnostic Vehicle Technician within a main dealership.
- 30 days holiday including bank holidays, which increases with length of service
- Fantastic discounts on MOTs, services and parts for Diagnostic Vehicle Technicians/Car Mechanics
Key responsibilities for this Diagnostic Vehicle Technician role are:
- Undertake maintenance, service and repair activities on motor vehicles to the highest standard
- As a Diagnostic Vehicle Technician/Car Mechanic you will carry out all work completely and effectively
Minimum requirements for this Diagnostic Vehicle Technician role are:
- Qualified to NVQ level 3 (or equivalent)
- Have at least 2 years experience after qualifying period, of working in a Dealership as a Diagnostic Vehicle Technician/Car Mechanic (or similar)
- Must have a Driving License
Diagnostic Vehicle Technician Stafford - Main Dealership - £45k OTE upwards
Job Type - Permanent
Hours - Full time
Job Title Diagnostic Vehicle Technician/ Car Mechanic
If you are interested in this Diagnostic Vehicle Technician/ Car Mechanic role, please apply today! ....Read more...
Type: Permanent Location: Stafford,England
Start: 10/05/2024
Salary / Rate: £45000 per annum
Posted: 2024-05-10 11:41:05
-
Job Title: Mechanical & Electrical Technician - Plant & Equipment
Role Overview:
As a Mechanical & Electrical Technician - Plant & Equipment, you will play a vital role in ensuring the proper maintenance of industrial tools and machinery, adhering to safety, legal, and company specifications.
You will be responsible for responding to reports of broken or faulty items, conducting inspections, and coordinating with external service providers and contractors to carry out necessary works.
Responsibilities:
Booking in and supporting scheduling of maintenance activities.
Escorting non-permanent service providers around the site.
Effective communication both verbally and written, internally and externally.
First-line diagnostics and interface with service providers/contractors.
Liaison with operations managers and facility management to resolve difficulties and enquiries.
Supporting G.S.E preparation and pre-use checks.
Carrying out basic maintenance such as belt replacement, bearing replacement, and lubrication in line with product contamination constraints.
Awareness of safety issues associated with Mechanical Handling Equipment.
Conducting monthly EHS audit action tracker follow-ups.
Running reports for LOLER defects and supporting recertifications action plans.
Actively seeking to develop own learning and skills.
Organizing and managing own workload effectively.
Understanding and using company systems and software.
Suggesting process improvements considering business benefits.
Awareness of the need to involve others as required.
Skill Set:
Essential:
Strong understanding of Mechanical and Electrical systems.
Evidence of achieved qualification and experience within the maintenance engineering field.
Excellent communication, interpersonal, and organizational skills.
Ability to organize maintenance and required equipment to ensure safe operation and maintenance of machinery.
Reasonable level of fitness (role will require substantial movement across the site including vertical ladders to access plant).
Required to successfully attain Baseline security DBS clearance.
Experience in dealing with customers and suppliers.
Understanding of health and safety legislation.
Desirable:
Understanding of operational and maintenance procedures.
Competency in using handling equipment (e.g.
Electric fork trucks/Tugs/Cherry pickers/MEWPS).
Proficiency in working with Microsoft Office software's and Google Tools.
Good underpinning knowledge of contamination risk control.
Good underpinning knowledge of working with and around chemicals.
ChatGPT can make mista
....Read more...
Type: Contract Location: Stevenage, England
Salary / Rate: £24.19 - £32.00 per hour
Posted: 2024-05-09 10:56:27
-
Job Description: As a Technical Data Engineer - Systems, you will play a crucial role in ensuring the safe and efficient accomplishment of aircraft maintenance adapted to customer needs.
You will be responsible for a range of technical, authoring, subcontracting, validation, verification, design criteria management, and customer relationship activities related to the production and support of Maintenance & Material related products.
Key Responsibilities:
Technical/Authoring Activities: Maintain compliance with regulatory standards, manage all authoring activities, act as a technical focal point for various stakeholders, and ensure technical consistency.
Subcontracting Activities Management: Oversee subcontracted activities in accordance with company protocols, ensure information flow, and provide guidance to subcontractors.
Validation & Verification Activities: Proofread and perform incoming inspection of procedures, and ensure adherence to quality standards.
Design Criteria Management: Contribute to design criteria assessment, integrate and manage design criteria impacting Technical Data products, and coordinate with other relevant departments.
Customer Relationship & Support: Provide continuous support to customers and users of deliverables, ensure timely delivery, and implement improvements based on customer feedback.
Qualifications and Skills:
Strong understanding of EASA/FAA regulations and EN9100 standards.
Experience in technical writing and authoring activities.
Excellent communication and interpersonal skills
Ability to manage subcontracted activities effectively.
Attention to detail and ability to prioritize tasks.
....Read more...
Type: Contract Location: Filton, England
Salary / Rate: £36.42 - £48.18 per hour
Posted: 2024-05-09 09:24:03
-
Holt Executive are partnered with a global leader in Space Sustainability, a dynamic and rapidly growing technology innovator who is making hugely positive contributions to the growing problem of orbital space debris.
They require a Mission Operations Preparation Team Lead to be responsible for crafting achievable mission operations plans that consider both how the mission can be run smoothly and the limitations it faces.
To achieve this, you'll work closely with engineers across space and ground systems.
The successful Mission Operations Preparation Team Lead will be required to have a deep understanding of mission operations and the ability to collaborate effectively with the Mission Operations Team.
This opportunity offers a comprehensive benefits package, featuring visa sponsorship and relocation package.
Key Responsibilities for the Mission Operations Preparation Team Lead:
- Lead the provision of operational aspects, constraints, requirements and experience in mission development.
- Communicate the operational needs to space and ground segment design.
- Define and plan operational system testing (e.g.
SVTs) for execution in collaboration with the Mission Operations Team.
- Contribute to the development of mission operations concepts, and mission review cycles (PDR, CDR, GSQR, ORR etc), reliably predicting and addressing operational concerns during the mission development process.
- Define operability requirements and user stories, to support the design of the Space segment.
- In collaboration with space segment engineers, lead the preparation of spacecraft user manuals and other operations documentation.
- Provide operations expertise at system, subsystem and unit levels, supporting ongoing mission development, bid proposals and other activities as required.
- Investigate spacecraft anomalies and participate in the anomaly resolution process.
- Propose and develop operational solutions to enable a team of engineers to control multiple in-flight spacecraft.
- Support Mission execution team and team training in preparation for launch.
Team Lead Responsibilities for the Mission Operations Preparation Team Lead:
- Line management of team members and team coordination, task prioritisation.
- Support team development, training and recruitment processes.
- Overall responsibility for the teams technical output.
- Identify and resolve key technical and schedule risks in your team's plans.
Key Skills & Experience for the Mission Operations Preparation Team Lead:
- University degree in a relevant engineering discipline.
- 10+ years of demonstrable space mission industry experience, including real-time operations as part of a flight control team operating a Low Earth Orbit (LEO) mission through the complete life cycle.
- Space and ground segment engineering experience is also beneficial.
- Comprehensive knowledge of satellite subsystems, in particular AOCS/GNC or OBDH/CDH.
- Familiarity of the operation of Mission Control systems (preferably SCOS-2000 based), mission planning processes, flight procedure development and automation, monitoring and control, onboard software management, configuration management of operational products and simulator facilities.
- Knowledge of Functional Avionics and the conceptualisation of how to use OBSW and ground systems to fulfil a mission following operational constraints.
- Experience supporting critical mission phases as Spacecraft Team Lead or similar, providing coordinated, timely and accurate input to the mission operations team.
If your skills and experience match this Mission Operations Preparation Team Lead opportunity, we encourage you to apply by sending your CV to info@holtexecutive.com
....Read more...
Type: Permanent Location: Oxfordshire,England
Start: 08/05/2024
Salary / Rate: Competitive
Posted: 2024-05-08 08:32:09
-
Key Responsibilities:
Conduct process mapping and requirement definition to support business objectives.
Lead analysis, design, development, integration, and deployment of projects.
Create lifting processes to support crane lifts within manufacturing operations.
Ensure projects are executed within agreed budget, schedule, and resource parameters.
Collaborate with stakeholders to define "AS IS" and "TO BE" solutions.
Manage project finances, including cost benefit analysis, planning, and budgeting.
Develop comprehensive project documentation adhering to agreed governance standards.
Identify and mitigate risks and dependencies to ensure successful project delivery.
Required Skills and Qualifications:
Proven experience in project management (LBIP, AGILE, use of Planisware or similar tools).
Project management accreditation is advantageous.
Familiarity with lifting and handling methods is preferred.
Background in a production environment is desirable.
Strong stakeholder management and customer relationship-building skills.
Ability to analyze and simplify complex topics for stakeholders.
Knowledge of Click n Buy, FMEA, SWOT analysis, 5 whys, Fishbone Analysis, Flowcharts is beneficial.
Experience in generating technical specifications based on operational requirements.
Why Join? As a Project Engineer at this Aerospace company , you'll be at the forefront of innovation, contributing to the development of cutting-edge aerospace solutions.
You'll work in a dynamic environment alongside talented professionals, with opportunities for growth and advancement within a global leader in the aerospace industry. ....Read more...
Type: Contract Location: Broughton, Wales
Salary / Rate: £26.48 - £35.03 per hour
Posted: 2024-05-07 13:43:04
-
Job Title: AIT Mechanical Engineer
Role Overview:As an AIT Mechanical Engineer, you will play a crucial role in the production and integration of satellites and payloads.
Utilizing your expertise in mechanical engineering, you will be responsible for writing processes, plans, and procedures using 3D Experience software.
Your duties will involve supporting hardware assembly, conducting environmental testing, and ensuring the quality and efficiency of our operations.
Responsibilities:
Project Preparation Phase
Collaborate with project teams from inception to customize processes for optimal manufacturing.
Facilitate DMU sessions to ensure designs are manufacturable and integrate seamlessly.
Create comprehensive documentation essential for production phases, including work instructions and procedures.
Lead the installation of satellite appendages and prepare integration flows.
Assist in defining MGSE requirements and support procurement activities.
Provide support to the Process Owner team in various aspects of their role.
Project Operational Phase
Assist the AIT Lead Engineering team during periods of high workload.
Aid process owners in resolving observations and operational tasks.
Oversee unit installation activities on satellites.
Conduct quality reviews, PFMEA, and Root Cause Analysis.
Develop re-work instructions based on project needs and identify necessary parts and tooling.
Non-Project Responsibilities
Design tooling and build aids to optimize assembly processes.
Provide support to Research and Development initiatives.
Develop and maintain training modules for team members.
Ensure standardization, optimization, and currency of working modes and processes.
Skills Required:
Essential
Proficiency in mechanical skills with relevant experience.
Strong ability in writing procedures and maintaining process control.
Proactive approach with a keen eye for quality.
Experience producing high-quality documentation for aerospace applications.
Ability to handle changing priorities across multiple projects.
Excellent problem-solving skills in technical, logistical, and organizational aspects.
Familiarity with satellite integration processes and project phases.
Expertise in satellite appendage installation processes.
Detailed understanding of complex mechanical systems.
Proficiency in lean manufacturing techniques and continuous improvement methodologies.
Experience with environmental testing procedures.
Competence in handling and installing thermal hardware.
Previous experience in payload builds is advantageous.
....Read more...
Type: Contract Location: Stevenage, England
Salary / Rate: £26.45 - £35.00 per hour
Posted: 2024-05-07 09:00:13
-
Job Title: NDT Technician
Description:
Join a dynamic team at the forefront of aerospace innovation.
We are seeking a skilled NDT Technician to conduct nondestructive testing (NDT) examinations on aircraft materials, components, and structures.
As part of our dedicated team, you'll play a crucial role in ensuring the safety and integrity of our aerospace products.
Responsibilities:
Conduct NDT examinations on aircraft materials (Composite and Metallic) components and structures across all business areas.
Maintain in-house technical requirements, including documentation control, continuation training, and operational surveillance.
Provide line-side support to operations and Andon support direct to operations.
Assist in PPS support and external/internal audit support.
Contribute to concession reduction projects.
Perform performance checks on in-house NDT instrumentation.
Maintain personal approvals in accordance with applicable NDT certification schemes and business requirements.
Required Skills:
Essential:
EN4179 (or equivalent) Level 2 qualification in Eddy Currents and Ultrasonic.
Experience in testing and inspection methods for both Composite and Metallic materials.
Effective communication skills, both written and verbal.
Ability to work autonomously as well as part of a small team.
Strong organizational skills and self-motivation to meet tight deadlines.
Desirable:
Familiarity with SAP systems and processes.
Benefits:
Competitive salary
Health insurance
Retirement plan
Career development opportunities
....Read more...
Type: Contract Location: Broughton, Wales
Duration: 6 Months+
Salary / Rate: £29.14 - £38.55 per hour
Posted: 2024-05-01 13:56:58
-
About Us: Our Client is a leading Aerospace business.
They are committed to delivering high-quality products while maintaining a safe and efficient working environment.
Join Their team and be part of a dynamic and innovative organization.
Role Overview: As a member of our AIT (Assembly, Integration, and Test) Operations team, you will play a crucial role in ensuring the consistent production of items that meet all quality requirements according to the production plan.
Responsibilities:
Identify anomalies and address non-conformances, collaborating with Team Leaders/Engineering to update paperwork and maintain accurate build sequences and data capture.
Adhere to standard processes, local area requirements, and health and safety regulations, including Cleanroom protocols and 5S policies.
Read and interpret shop floor documentation such as routings, drawings, work instructions, and bills of material to execute tasks accurately.
Complete all relevant paperwork, including traceability stamps and error reporting, while providing progress updates to Lead Technicians/Team Leads.
Contribute to maintaining 5S disciplines and participate in continuous improvement activities.
Provide technical support when required, and assist in training new team members.
Be flexible and adaptable to support different operational teams and tasks based on business requirements.
Participate in shift handovers and attend training sessions as required.
Daily Tasks:
Perform assembly and final assembly processes for aluminium composite panel manufacture, including drilling, reaming, riveting, bracket equipping, torque loading, and bonding.
Ensure high tolerance requirements are met (typically better than 0.05mm) in various areas of production.
Skill Set:
Essential:
Previous experience in composite manufacturing, mechanical fitting, or close tolerance sheet metal work.
Ability to work from detailed drawings and electronic work instructions.
Experience in industries such as Space, Aerospace, Automotive, or Motorsport.
Comfortable working in confined spaces above floor level (Working at height).
Familiarity with cleanroom environments and teamwork dynamics.
City and Guilds qualification or BTEC National.
Strong manual dexterity and proficiency with hand tools.
Demonstrated initiative and problem-solving skills.
Desirable:
Relevant externally accredited skills or certifications.
Join our team and contribute to our mission of delivering On Quality, On Cost & On Time products to our customers.
....Read more...
Type: Contract Location: Stevenage, England
Salary / Rate: £18.00 - £23.82 per annum
Posted: 2024-05-01 13:50:32
