-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2024-11-12 14:45:15
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:45:15
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:45:13
-
JOB DESCRIPTION
Job Summary:
KIRKER, a leading nail polish manufacturer, is seeking an experienced and dedicated Customer Service manager to lead and manage the department.
The ideal candidate will ensure that all customer service processes are followed meticulously in line with quality expectations and will play a crucial role to keep an outstanding level of customer satisfaction.
This position requires strong leadership skills, a deep understanding of customer service best practices, and the ability to drive continuous improvement in processes and customer support to increase their level of satisfaction.
Key Responsibilities:
Develop and maintain strong relationships with key customers, ensuring their needs are met and expectations exceeded. Implement customer service initiatives that enhance the customer experience and drive customer loyalty. Ensure accurate and timely communication with customers regarding order status, product availability, and any potential delays. Ensure that all SOPs are strictly followed, maintaining high standards of service, quality and customer satisfaction in line with ISO/FDA/GMP requirements Collaborate with multiple departments to ensure perfect order management: on time and in a qualitative manners.
Handle escalated customer service issues, providing solutions, ensuring a positive customer experience and constant improvements. Monitor and analyze customer service metrics, preparing regular reports for senior management. Work with cross functional teams to ensure customer feedback is incorporated into products and operations. Manage Customer Service Department staff.
Qualifications:
Bachelor's degree in Business Administration, or a related field. Proven experience in a customer service management role, preferably within the manufacturing or beauty industry. Strong knowledge of ISO certification and SOP implementation. Excellent leadership, communication, and interpersonal skills. Ability to manage multiple tasks and priorities in a fast-paced environment. Proficiency with excel, Power BI and D365 Strong problem-solving skills and a proactive approach to customer service. Ability to work collaboratively with cross-functional teams.
ABOUT US
Kirker is a custom manufacturer of nail lacquer and nail care treatment products since the 1940's that has evolved into a full turnkey operation.
We are proud to offer our services in filling and packaging from free standing stock to beautifully designed packaging options and displays.
With manufacturing operations in the United States and Europe, we offer the right option to fit each customer's individual requirements.
Kirker offers a full range of services from product development, R&D, production, and quality control, to filling and pack off.
Our cutting-edge expertise, custom formulations, and first-class service have affirmed our leadership position within the industry.Apply for this ad Online! ....Read more...
Type: Permanent Location: Paterson, New Jersey
Posted: 2024-11-12 14:45:13
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration. Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Job Description:
Legend Brands is seeking Assembly Operators for our swing shift, 3:30 pm- 2:00 am, Monday-Thursday at our Burlington, WA location.
Some overtime may be required.
Shift differential of $2.00/hour for all hours worked on the swing shift.
Job Requirements:
Fabricate and assemble components into finished industrial products including testing, inspection, and packaging for final delivery. Perform all duties such as mechanical assembly, electrical wiring, testing, inspection, and kitting and packaging in an efficient, safe, and quality conscious manner according to specifications, procedures, schedules, and safety standards.
Qualifications:
Mechanical aptitude, manual dexterity, and basic experience with power tools High School diploma or equivalent required Manufacturing experience preferred
Hiring Range:
Between $18.00 - $18.00/hour
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays per year, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through November 30, 2024.
Applications will be reviewed as received and on-going interviews will be conducted as necessary
ABOUT US
Legend Brands group is the leading provider of equipment, chemicals and expert training for professional cleaning, facility maintenance, portable environmental control, smoke and fire remediation and water damage restoration.Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2024-11-12 14:45:13
-
JOB DESCRIPTION
Job Title: Digital Marketing Director
Location: Vernon Hills, IL Department: Marketing Reports To: Executive VP Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including Paints, Stains, Cleaners and of course our famous rust fighting formula that started it all.
Essential Duties & Responsibilities:
Lead and manage teams that execute on Digital and Social campaigns and initiatives Collaborates with product management teams to develop digital and social media strategies and initiatives based on business objectives Analyzes the company's digital marketing plan and social media strategy to identify strategic weaknesses and make recommendations for improvements Unearths the trends and insights to make sure Rust-Oleum is telling relevant stories, identify threats before they become risks and jump on an opportunity to engage consumers in our brand stories Researches social media trends and informs management of changes that are relevant to the company's marketing activities Set key performance indicators (KPIs) for social media campaigns, such as targets for a certain number of shares or likes and measuring a campaign's performance against the KPIs Develop strategy and execute social media tactics for sponsorship programs and special events based on business objectives.
Collaborates with PR and advertising team Work closely with customer e-commerce and social media teams Oversees social media management for all social platforms including but not limited to Facebook, X, LinkedIn, Pinterest, Instagram, TikTok, etc. Develop strategy and manage social customer care in coordination with Product Support Manage reporting tools and capabilities for Social listening, content performance and inbound traffic across channels to owned landing pages
Who You Are
You are an empathetic and an influential leader.
You are able to handle differences of opinion in a professional and respectful manner You must be able to think quickly and respond via social media during a crisis and should be able to pivot quickly with limited oversight You are a versatile manager who can provide leadership at the top as well as execute in the trenches You excel in people leadership.
You are passionate about building a high performing team by developing team knowledge, skills, and career growth You are an exceptional presenter who inspires leadership and cross-functional teams to follow you to the top of the hill.
You can take complex problems or concepts and lay out solutions that are simple and concise You are an entrepreneurial spirit who can move quickly to capitalize on market opportunities and thrives in a fast-paced environment You are a winner who thrives in a winning culture
Qualifications & Requirements
Bachelor's Degree in Communications, Public Relations or related field 8 + years of social media experience in an agency or corporate environment (consumer goods experience preferred) Ability to interface and collaborate with marketing staff and senior management Excellent writing skills Excellent digital media research and outreach skills Excellent interpersonal and presentation skills Self-starter with the ability to work independently Ability to recruit, hire, retain, and develop talent
LEADERSHIP TRAITS
Strategic Planning: Is proactive, forward-looking and can anticipate trends.
Has vision and can create competitive and breakthrough strategies and plans.
Change Management: Ability to adapt to change, anticipate future needs, is flexible, overcomes resistance to change, and demonstrates managerial courage
Problem Solving: Is able to understand and evaluate complex issues and devise and implement successful solutions.
Is focused on results, can see hidden problems, and takes logical approach and probes fruitful sources for answers.
Is proactive and decisive in nature
Communication: Has effective verbal communication and presentation skills, has effective writing abilities (clear and succinct), had executive presence, has active listening abilities, and can convey important or critical messages that have the desired effect.
Collaboration: Identifies opportunities for shared resources, seeks partnerships, is a team player, and involves others.
Builds commitment, fosters open dialogue, and supports diversity and input from all team members.
Is open minded and transparent.
Decision Making: Uses critical thinking skills, has a track record of making high quality decisions, does not hesitate when making decision, is confident, and is action oriented.
Developing Others: Coaches others and nurtures emerging leaders.
Is a keen listener, provides challenging/stretch assignments, encourages development, confronts and deals with performance issues effectively and delegates tasks effectively in order to develop others.
Judgment: Adopts strategic, analytical and carefully weighted decision-making process in the evaluations of alternative scenarios.
Financial Acumen: Has demonstrated financial acumen, can successfully budget and forecast, and understands cost implications of decisions.
Integrity & Commitment: Demonstrates integrity, has commitment, shows moral courage, demonstrates emotional intelligence, is values-driven, respects the Company culture, and demonstrates responsible entrepreneurship.
Has a can-do attitude and the desire to go above and beyond.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9.5 paid holidays and 2 floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2024-11-12 14:45:11
-
JOB DESCRIPTION
Job Title:
Quality Engineer
Location: Vernon Hills, IL
Department: Rust-Oleum US Corporate Quality
Reports To: Manager, Corporate Quality
Direct Reports/Manages others: No
Hybrid Schedule: Our hybrid work environment includes two (2) remote days/week.
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
The Quality Engineer is responsible for providing technical support for the corporate quality team.
The role will work with our internal quality teams to work on continuous improvement activities as well as supporting new product activities.
They will take leadership of our Product Complaint Review (PCR) process, where they will analyze consumer complaint data and identify opportunities for improvement in our products that will drive improved customer and consumer satisfaction.
This individual will work closely with our corporate and plant quality teams, as well as manufacturing and R&D.
RESPONSIBILITIES:
Work with plant and corporate quality teams on management of quality projects and new product launches. Risk assessments on new product launches.
Design and implementation of new quality processes Statistical assessments of process capabilities and identification of opportunities for improvement. Analyze product complaint data, identify opportunities for improvement and work across cross-functional teams to drive improvements.
Will include In depth analysis of customer complaint data in excel, identification of poorly performing products from the data analysis and engaging the brand and R&D teams to identify possible product improvements. Support day-to-day management of quality incidents, processes, etc.
through data analysis and utilization of root cause analysis.
QUALIFICATIONS:
0-3+ years of experience (in a manufacturing setting) or equivalent process industry or consumer products manufacturing experience. Bachelor's degree in engineering (Chemical and/or Mechanical preferred) or Chemistry Proficient in MS office, Statistical analysis (Minitab, etc).
SAP experience desirable.
Nice to have: Experience in lean, six sigma or other continuous improvement methodologies Possible travel up to 30%
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2024-11-12 14:45:05
-
JOB DESCRIPTION
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodation may be made to enable qualified individuals with a disability to perform the essential duties.
The below list is intended to be illustrative of the responsibilities of this position and is not all encompassing. Research and analyze design proposals, specifications, and other data. Design and layout mechanical/electrical systems using SolidWorks EPDM. Support hardware, firmware, software and app development. Develop Bills of Materials for new circuit board designs. Evaluate existing designs for cost reduction, component updates, etc. Create technical drawings, schematics, etc.
Support development and manufacturing of electrical systems. Ability to use software analysis tools and calculation programs. Create test plans for component/product validation testing relating to performance, product safety, reliability, and durability. Help coordinate manufacturing launch of new/revised products including wiring work instructions, production test equipment training/work instructions, and other support documentation. Support the development of electrical test equipment for PCBAs and subassemblies. Develop test requirements for internal and external suppliers of electrical components. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Create Engineering Change Orders (ECOs) and Temporary Deviation Authorizations (TDAs) to support changes to new or existing components, products, and processes.
Education Requirements and Minimum Qualifications
BS Manufacturing Engineering Technology (BSMfgT) or BS Manufacturing Engineering (BSMfgE) with an Electrical Engineering background with 3+ years relevant experience. Advanced mathematical experience. Valid driver's license required. The requirements listed below are representative of the knowledge, skill, and/or ability required. Knowledge of electrical components, sensors, motors, switches, and controls. Knowledge of PCB design best practices Knowledge of solid modeling Computer Aided Design (CAD), specifically SolidWorks. Ability to work as a team member and/or individually towards overall company objectives. Ability to program firmware for system controls, User Interface, and wireless communication. Ability to travel up to 10% of the time.
Experience with product safety listing standards from various listing agencies UL, ETL, CSA, IEC.
Desired Qualifications
Knowledge of engineering Finite Element Analysis (FEA) software preferred. Design of Experiments knowledge and experience preferred. Understanding of electronic manufacturing processes preferred. Strong team player with leadership skills and the ability to drive change and manage multiple priorities.
Driven and self-motivated. Analytical, accurate, and detail oriented.
Hiring Range:
Between $86K - $99K/annually
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's. All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting application through November 30, 2024.
Applications will be reviewed as received and ongoing interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2024-11-12 14:45:04
-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:45:01
-
JOB DESCRIPTION
Mantrose Group is a world leader in specialty coatings and functional blends for the food and pharmaceutical industries.
Founded more than 100 years ago, Mantrose is a unit of RPM International Inc., a specialty coatings company traded on the NYSE under the symbol RPM.SUMMARY:Ensures inbound/outbound approvals per standard operating procedures and specifications.
Oversees all finished good labels and amendments as needed.
Assists QA team with all disposition correspondence, COA's, data entry, testing, swabbing, and other tasks as needed.DUTIES & RESPONSIBILITIES: • Approve receiving paperwork on all inbound shipments and release in ERP system.• Create Certificate of Analysis (COA) for all finished goods with micro data from 3rd party lab results• Release all finished goods in ERP system as COA is created, then saved.• Maintain all label templates in bartender & create new templates as needed.• Label approval checks against finished good specification.• Process all HOLD dispositions & email vendors/contract customers.• Tally monthly reports (swabs, disposition, issues log, environmental data)• Assist with monthly environmental swabs & daily equipment swabs as needed.• Assist lab with in-house testing and data entry.• Assist with lab supply orders.• Other lab duties as needed.REQUIRED KNOWLEDGE, SKILLS & ABILITIES: • Knowledge of Microsoft (Word, Excel, Outlook) • Knowledge of lab equipment a plus • Bilingual in Spanish recommended, not required.• Detail orientated, organized, and ability to multitask in a fast-paced environment.• Work proactively with all departments.• Time management skill set preferred.EDUCATION & EXPERIENCE: • Graduation from high school or GED equivalent • Previous work experience in Food Manufacturing Industry recommended, not required.PHYSICAL REQUIREMENTS & WORKING CONDITIONS: Ability to stand & sit for prolonged periods of time, walking, climbing, carrying, bending, kneeling, reaching, handling, pushing, and pulling.
Ability to lift up to 50lbs.Travel Required:n/aBenefits:Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to medical, dental, vision, Employer paid life insurance, STD/LTD, vacation/sick days/parental leave, 401(k), employee stock purchase plan, and pension.Mantrose Haeuser co., Inc./Profile Food Ingredients is an Equal Opportunity Employer and is willing to provide reasonable accommodation to qualified individuals with disabilities, unless doing so would cause undue hardship.
Rate: $19 Hour plus, Depending on Experience.Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois
Posted: 2024-11-12 14:45:01
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:58
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:58
-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 75 pounds and lift and/or move up to 600 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Satisfactory appearance of work area Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2024-11-12 14:44:58
-
JOB DESCRIPTION
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints. Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations. Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems. Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances. Prepare and maintain production reports or personnel records. Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality. Initiate or coordinate inventory or cost control programs. Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 1/2 paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2024-11-12 14:44:57
-
JOB DESCRIPTION
Job Title
: Senior Packaging Engineer
Location: Vernon Hills, IL
Department: Packaging Engineering
Reports To: Director, Packaging Engineering
Direct Reports/Manages others: No
Hybrid Schedule: Our hybrid work environment includes two (2) remote days/week.
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
The Senior Packaging Engineer is responsible for project management of packaging initiatives on cross-functional teams that support Brand Marketing new product development and continuous quality and cost improvement projects.
This position reports to the Director Packaging Engineering and will support the team function in driving the development and implementation of new or improved packaging processes, quality assurance and cost controls of packaging design and materials.
RESPONSIBILITIES:
Develop new packaging designs and specifications through collaboration with cross functional project teams to meet internal and external customer requirements. Develop ideas for packaging innovation, quality improvements, cost savings, and sustainability that are relevant to the business. Participate as an active member of cross-functional business teams comprised of individuals from a variety of disciplines, including Product Management, Manufacturing, R&D, Quality, Sourcing, and Purchasing. Design, coordinate, and complete performance and compatibility testing in support of packaging component changes at both internal manufacturing and external contract manufacturing sites Works in conjunction with and is a resource for Sourcing Managers, Purchasing, Manufacturing Plants, Quality and Distribution Centers to ensure successful testing protocols and plant trials on packaging materials. Collaborates with packaging material vendors to develop, establish and implement production packaging material specifications. Maintain awareness of technical trends and developments in the packaging industry. Understand and ensure packaging meets UN, DOT and regulatory requirements.
REQUIREMENTS:
Bachelors in Packaging Engineering or related field Minimum of 5 years of packaging development and project management experience preferably within CPG industry working with cross-functional teams Experience with packaging materials capabilities and equipment along with physical and structure package testing procedures Good verbal and written communication skills required.
Must have the ability effectively communicate with cross-functional business partners. Ability to progress multiple projects concurrently. SAP preferred but not required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2024-11-12 14:44:57
-
JOB DESCRIPTION
GENERAL SUMMARY
Operate and maintain pen labeling machine.
Maintain production pace in accordance with scheduling requirements and production line output.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned. Set machine with proper labels per batch ticket instructions Run machine to apply labels to fill sticks Complete batch ticket with required labeling information Perform very basic mechanical adjustments and repairs as needed Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No prior experience necessary
Specific Knowledge, Skills, and Abilities Required
Basic math/measurement skills Basic reading and comprehension skills Great attention to detail and following written and verbal instructions
Reasoning Ability
Determine correct process regarding standard fill stick labeling procedures as instructed in initial training and on batch ticket Work without continuous supervision while completing assigned projects
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment, and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 75 pounds with provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description
KEY PERFORMANCE INDICATORS (KPI)
Number of labeled pens produced daily Accuracy of pen labeling Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:57
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Description:
Legend Brands is hiring a Shipping Associate for our Nashville TN location.
This position is responsible for preparing, scheduling, and shipping customer orders or transfers.
This role involves picking, packing, labeling of shipments, and preparing domestic and international shipping documents for freight and parcel shipments.
Responsibilities include operating forklifts, using various computer systems, and maintaining a clean, safe work environment. Initial training for this position will be from 7:30 am to 4:00 pm Monday-Friday.
The shift hours after 90-day training period will be 8:30 am to 5:00 pm Monday-Friday.
Overtime may be necessary based on business needs.
Please apply directly on our careers page -
https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Job Requirements:
Accurately pick, pack and label orders for shipment Prepare shipping documents for domestic and international shipments Process shipments with ERP, TMS and parcel systems (UPS/FedEx) Coordinate with transportation providers Operate forklifts, reach trucks and pallet jacks to move materials within the warehouse
Qualifications:
High School diploma or equivalent 1-3 years of warehouse or shipping experience preferred Experience with ERP/WMS systems, Microsoft D365 experience a plus UPS/FedEx experience preferred Ability to lift 35-100 lbs.
(with assistance) Forklift certification or ability to obtain Hazardous material shipping certificate or ability to obtain Strong organizational and communications skills and the ability to multi-task
Hiring Range:
Between $18.00/hour to $20.35/hour
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage,10 paid holidays per year, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through November 30, 2024.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Nashville, Tennessee
Posted: 2024-11-12 14:44:57
-
JOB DESCRIPTION
Job Title: Product Support Representative
Location: Vernon Hills, IL
Department: Product Support
Reports To: Manager, Product Support Group
Direct Reports/Manages others: No
Weekly Hybrid Schedule: Monday- Wednesday are in office workdays for the team, Thursday and Friday are remote workdays.
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
Summary:
As our Product Support Representative, after training, you will be the go-to problem solver for the end user of RO products.
You will determine each customer's needs, answer their questions, share product information and provide effective solutions to their challenges while delivering exceptional customer service.
This role is perfect for someone who thrives on no two days being the same, who loves solving problems, enjoys educating others and is passionate about providing exceptional customer service.
This call center is operational from 7am- 6 pm.
Flexible scheduling availability is required to accommodate our customers' needs.
Responsibilities:
Communicates with customers by telephone, email, chat or social media channels to provide information about proper selection of products and their use, and to help resolve consumer issues. Utilize product documentation as well as received training to support consumers across a wide assortment of products. Documentation of customer interactions and transactions, recording details of inquiries, complaints, and comments, as well as actions taken. Obtain and examine all relevant information to assess validity of problems and to determine possible causes. Collaborate with other departments in the organization on the investigation and documentation of reported issues.
Requirements: This call center is operational from 7am- 6 pm.
Flexible scheduling availability is required to accommodate our customers' needs.
3+ years' experience in customer service, preferably in a call center environment Outstanding listening and communication skills.
Must possesses a strong customer focus Demonstrated ability to successfully 'think on your feet' - to analyze information received and quickly process it to determine what would be the appropriate next step in terms of additional information needed, appropriate resolution, or referral as beyond scope Technical adaptability; should have the ability to learn new software, systems, etc.
easily Ability to incorporate technical knowledge, customer requirements, policy guidelines and situational information to resolve customer issues
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO (vacation/sick days/parental leave).
Rust-Oleum offers 9 paid holidays and two floating holiday per year.
We also offer a 401(k) plan after three months of employment.
Oleum is an equal opportunity employer Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2024-11-12 14:44:56
-
JOB DESCRIPTION
GENERAL SUMMARY
Directly manage daily service requirements for assigned account(s)/territory.
Assure proper and effective coverage of all assigned account(s).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Effectively manage daily service requirements for assigned account(s)s and territory where applicable to minimize sales and/or management support requirements.
Support overall achievement of planned sales and profitability objectives for the assigned account(s), territory, and overall business.
Directly responsible for all service activities within assigned territory/account(s) including:
On-site product testing and refinement
Customer personnel training and development as directed.
Product and process issue resolution
Process documentation in a timely manner and as directed.
Process auditing
Other assigned service requirements as directed/assigned.
Maintain effective, regular, and competent communication with the company's laboratory through:
Complete and thorough Lab Work Requests
Documentation of trial results on all new products
Key activity reports
Line surveys
Provide appropriate and regular reporting of activities and accomplishments to assigned Regional Sales Manager and others as directed to including but not limited to:
Monthly report and key trip or activity reports
Updates on competitive activities in the marketplace or at key customers/accounts
Provide professional representation for the company at trade shows and with industry organizations and attend company functions as directed.
Position requires personal's primary residence to be within assigned territory.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skills, and/or abilities required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required/Preferred
High school graduate or equivalent required
4-year degree preferred
Minimum 5 years related finishing experience or laboratory formulation experience.
Professional training in related business and/or professional seminars
Specific Knowledge, Skills, and Abilities Required
Excellent motivational facilitator skills
Excellent people and leadership skills
Excellent analytical and organizational skills
Excellent verbal and written communication skills
Excellent score on color examination
Computer skills include word processing and spread sheets.
Ability to objectively assess positive performance and address performance issues.
Self-motivated, proactive, aggressive, and self-assured work ethics
Provide leadership (leading by example with confident decision-making ability)
Ability to think creatively to define and address personal, group or business needs and opportunities.
Ability to travel as required.
Reasoning Ability
Comprehend technology uses and applications.
Demonstrate outstanding problem solving and critical thinking skills.
CERTIFICATES, LICENSES, REGISTRATIONS
Valid driver's license
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to walk, stand, bend, and/or stoop, grasp, handle or feel, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds and occasionally lift and or move up to 100 pounds.
The employee is frequently required to bend, squat, and stoop.
The employee is required to sit, walk, lift, carry, push, pull, climb, and kneel in this position.
The employee must be physically able to meet demands required by frequent travel to and from customer sites.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a typical manufacturing environment with moderate solvent odors and normal hazards associated with handling, compounding and application of coatings may be present.
Most duties will be performed within assigned customer or prospective customer manufacturing facilities.
Other duties will be performed within RPM WFG or customer corporate, lab, and distribution facility sites.
Appropriate personal protective equipment is provided to always enable proper health and safety precautions.
HMIS and MSDS guidelines must be followed when working with raw materials and coatings to assure safety.
KEY PERFORMANCE INDICATORS (KPI)
Achieve 100% or better of monthly, quarterly, and annual service plans for assigned accounts/ territory.
Encourage, develop, and assist in increasing sales volume.
Maintain and expand his or her knowledge of the company's policies, products, and programs.
Exhibit initiative for advancement
Attend meetings and/or classes to advance job-related skills.
Excellent attendance recordApply for this ad Online! ....Read more...
Type: Permanent Location: Annapolis, Maryland
Posted: 2024-11-12 14:44:56
-
JOB DESCRIPTION
Determine schedules, sequences, and assignments for work activities, based on work priority, quantity of equipment and skill of personnel. Monitor employees' work levels and review work performance. Monitor tool and part inventories and the condition and maintenance of shops to ensure adequate working conditions. Investigate accidents and injuries and prepare reports of findings. Recommend or initiate personnel actions, such as hires, promotions, transfers, discharges, and disciplinary measures. Compile operational and personnel records, such as time and production records, inventory data, repair and maintenance statistics, and test results. Develop, implement, and evaluate maintenance policies and procedures. Counsel employees about work-related issues and assist employees to correct job-skill deficiencies. Examine objects, systems, or facilities, and analyze information to determine needed installations, services, or repairs. Conduct or arrange for worker training in safety, repair, and maintenance techniques, operational procedures, or equipment use. Utilize the computerized maintenance management system to deliver KPI data and evaluation maintenance efficiency. Involvement in Continuous Improvement initiatives and Root Cause Analysis is essential.
(CAPA) Research and suggest improvements based on recognized repetitive failure or substandard manufacturing practices, environment compatibility, etc. Provide support for multiple shifts, maintenance related activity or projects. Share any newly learned discoveries pertinent to repair or troubleshooting techniques that will assist team to respond more efficiently and safely. Assist in the training of Maintenance Apprentices. Communicating and conversing professionally and technically with maintenance, operations, engineering, and other resources to solving machine related issues and taking appropriate steps keeping equipment in peak operational condition. Expected to understand all equipment functions of the plant. Perform other duties as assigned by the manager and/or plant manager including project management and contractor management. Ability to work independently with resourcefulness, originality, and initiative. Understanding of functional criteria for control systems, power systems, and electronic device selection. Soft skills, interacting, positive reinforcement, teamwork, highly cooperative, attentive, leading by example,
Skills/Experience
Demonstrated leadership in the following areas: preventative maintenance, implementing continuous improvement, Lean manufacturing, safety, standard work and employee coaching & development. Experience with CMMS required. Must possess good verbal, written, and presentation communication skills, with ability to communicate at all levels within the organization. An associate degree in a technical discipline, journey worker credential or relatable on the job experience. SAP knowledge preferred. Microsoft Office experience required. Continued education will be required as needed to sustain departmental/individual technological levels and licenses
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9.5 paid holidays and 2 floating holidays per year.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fairborn, Ohio
Posted: 2024-11-12 14:44:55
-
JOB DESCRIPTION
Job Title: NEW PRODUCT DESIGN ENGINEER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products.
You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the "thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 2 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2024-11-12 14:44:51
-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:50
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:50
-
JOB DESCRIPTION
As our Material Handler, you will work in our plant to pick orders.
We can't ship without you.
Every day you will work alongside a hardworking and fast-paced team to select orders from the warehouse floor and place them on the correct pallet.
To thrive you must be prepared to lift packages of 50 pounds repeatedly and always think safety first.
You'll be someone your team can rely on to make sure our orders are right before they're in route to our customers. Solving challenges is the very foundation of who we are.
After all, our founder, sea captain Robert Fergusson, didn't particularly set out to invent rust preventive paint.
He just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. Founded in 1921, the same passion that drove the Captain to create the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2,000 people across every corner of the world help us remain the global leader in protective paints and coatings for both home and industry. Here is what to expect: Picking, packing, and processing orders accurately. Processing normal, discrete, ASN, UPS, export, and other special requirement orders. Operating forklifts, Raymond trucks, and comparable equipment. Determine shipping method for materials, using knowledge of shipping procedures, routes, and rates. Confer and correspond with establishment representatives to rectify problems, such as damages, shortages, and nonconformance to specifications. Operating departmental computers within an order-processing function. Actively participating in Quality Improvement Process. Maintaining a safe and clean work area throughout the warehouse and shipping areas. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
1-3 years of related experience in an equivalent role. High school diploma or GED. Must be able to work above average overtime and flexible hours. Strong communication and interpersonal skills; ability to read, write, speak, and understand English. Ability to conform to specific customer requirements and process paperwork. Aptitude with SAP/WMS System, PC skills, as well as ISO-9001 requirements. Appropriate forklift and Raymond operating skills. Ability to lift 50 lbs.
repeatedly for extended periods.
Additional Consideration Given to Those With:
Previous shipping/traffic and material handling experience. Paint/Coatings/chemical industry knowledge or experience. Apply for this ad Online! ....Read more...
Type: Permanent Location: Martinsburg, West Virginia
Posted: 2024-11-12 14:44:48
-
JOB DESCRIPTION
The primary result expected from the Buyer will be to Oversee the procurement cycle, from selecting and setting up supplier accounts to ensuring timely delivery of materials and supplies.
It entails managing purchase orders, reconciling transactions and maintaining accurate inventory and vendor information to support the company's operational needs.
Typical tasks for this position include (but are not limited to) the following:
Oversees the procurement process for all production-related materials and supplies. Conducts research to identify new suppliers and outsourcing opportunities to meet facility requirements. Qualifies potential suppliers and sets up vendor accounts, ensuring a robust supply chain. Negotiate prices, discount terms and transportation arrangements for merchandise. Examine, select, order, and purchase at the most favorable price merchandise consistent with quality, quantity, specification requirements and other factors. Generates purchase orders utilizing existing procedures, ensuring accuracy and compliance. Reconciles delivery documentation with received goods, maintaining stringent record-keeping.
Rectifies any issues related to shipments or billing with suppliers, maintaining positive relationships. Conducts administrative tasks, including drafting correspondence and compiling reports. Keeps the Supply Chain Manager and Plant Director informed of market trends affecting process, consumption, and other related purchasing factors. Validates receipt of proper credit for all vendor material returns and addresses discrepancies. Monitors ongoing orders and takes action to expedite as needed to guarantee on-time delivery.
Keeps up-to date and detailed vendor information, including contracts, contacts, and pricing.
Desired Skills & Experience
Bachelor's degree in a business-related discipline preferred 5-10 years' experience in the procurement of Chemicals required - preferably Pigments, Resins and Solvents SAP & Microsoft (specifically Excel) knowledge preferred. Ability to successfully multi-task in a fast-paced environment and act as a strong team player Experience with project management, expediting and optimizing inventory levels Excellent communication and strong negotiation skills This position requires an individual who is self-directed and detail-oriented with an inquisitive nature and the desire to solve problems A strong work ethic with a positive "can-do" attitude and one who takes pride in the quality of their work Experience managing multiple tasks at one time along with understanding overall direction and goals.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, holiday, vacation, sick and parental leave days.
We also offer a 401(k) plan after three months of employment.
This is an Exempt position.
Salary Range: $ 67,000 - $ 100,000 Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hagerstown, Maryland
Posted: 2024-11-12 14:44:01
