-
GNSS Signal Performance Engineer required to inspire, refine and develop real world active positioning software systems.
As a GNSS Engineer you will join a team of GNSS experts analysing ground based real time signals to create the next generation of precision location and navigation services.
Working closely with mathematicians, scientific researchers, algorithm developers, engineers and business development on third party capabilities in software services.
What you will have
Relevant academic research or commercial experience on the analysis of low level GNSS signal processing and measurement engine performance, GNSS measurement engine signal processing data analysis and the experimental method.
Matlab.
Source Control ideally with GIT.
Product development experience: requirements capture, test definition, design and development.
GNSS signal-processing chain understanding.
Synthetic aperture processing skills.
Spirent simulators for GNSS simulation and algorithm implementation.
Kalman filters and other probabilistic estimation techniques.
Multi sensor fusion technique knowledge, ideally tight and deep coupling for GNSS-INS.
C++ programming experience.
RTK, PPP, multi constellation positioning or multipath mitigation method experience.
Key Responsibilities
Technical analysis of GNSS precision location trials, analysis and improvement in Software.
Creation and analysis of data generated with in house simulation tools.
Generate clear, concise and quantitative analysis reports to gain insights to improve software.
Propose, lead and participate in R&D initiatives for ground breaking technologies. ....Read more...
Type: Permanent Location: St Paul's, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £90000 Per Annum None
Posted: 2025-03-18 11:57:16
-
GNSS Signal Performance Engineer required to inspire, refine and develop real world active positioning software systems.
As a GNSS Engineer you will join a team of GNSS experts analysing ground based real time signals to create the next generation of precision location and navigation services.
Working closely with mathematicians, scientific researchers, algorithm developers, engineers and business development on third party capabilities in software services.
What you will have
Relevant academic research or commercial experience on the analysis of low level GNSS signal processing and measurement engine performance, GNSS measurement engine signal processing data analysis and the experimental method.
Matlab.
Source Control ideally with GIT.
Product development experience: requirements capture, test definition, design and development.
GNSS signal-processing chain understanding.
Synthetic aperture processing skills.
Spirent simulators for GNSS simulation and algorithm implementation.
Kalman filters and other probabilistic estimation techniques.
Multi sensor fusion technique knowledge, ideally tight and deep coupling for GNSS-INS.
C++ programming experience.
RTK, PPP, multi constellation positioning or multipath mitigation method experience.
What you will do
Technical analysis of GNSS precision location trials, analysis and improvement in Software.
Creation and analysis of data generated with in house simulation tools.
Generate clear, concise and quantitative analysis reports to gain insights to improve software.
Propose, lead and participate in R&D initiatives for ground breaking technologies. ....Read more...
Type: Permanent Location: Girton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £100000 Per Annum None
Posted: 2025-03-18 11:56:12
-
Senior Hardware Design Engineer will support the design and implementation of hardware subsystems for advanced mobile and fixed satellite tracking antenna terminals.
Key Responsibilities
Lead complex hardware designs and manage priorities.
Architect and design terminal hardware, ensuring quality and cost goals.
Present design analyses during reviews.
Verify and test hardware in a lab setting.
Mentor junior engineers.
Requirements
6 to 10 years in hardware design and testing.
Strong PCB design skills, Altium preferred.
Experience in power supply design and compliance testing.
Knowledge of embedded systems, high-speed digital design, and interconnect technologies. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £90000 Per Annum None
Posted: 2025-03-18 11:52:59
-
Support Engineer required to help diagnose and resolve RF Test customer problems using satellite navigation test and simulation systems.
You will become a GNSS satellite RF systems technical expert delivering exceptional technical support to international clients.
Requirements
BA, BEng or HND in appropriate Engineering discipline.
Technical customer support experience.
RF and other test equipment such as
Power Meters
Spectrum analysers
Frequency counters
Oscilloscopes
Linux OS.
Satellite navigation knowledge, ideally of GNSS
Responsibilities
Provide customers and end users with product and technical support.
Respond to incoming Service Requests from customers or sales engineers.
Analyse problems, replicating and demonstrating them, using appropriate dedicated support equipment.
Deliver solutions to customers for hardware and software issues.
Perform calibration or integration at customer sites on key product range when required.
Generate special test scenarios from customer requests. ....Read more...
Type: Permanent Location: Paignton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £38000 Per Annum None
Posted: 2025-03-18 11:49:48
-
RF Analog and Mixed-Signal IC Design Engineer required to help deliver high performance RF, analog, and mixed signal ASICs from specification through to GDSII tape out and production silicon.
Experience
Degree in Electronic Engineering also an MSc or PhD in Analog Mixed Signal IC Design preferred.
2+ years of experience in RFIC analog mixed signal schematic design and simulation in CMOS technologies.
Analog mixed-signal circuit design, including references, regulators, power management, data converters, filters, amplifiers, and high-speed serial interfaces.
IC layout and physical implementation.
RF, Analog and Mixed Signal IC evaluation and test.
CAD tools Cadence Virtuoso, Mentor Calibre, Linux, Version Control.
Analog and mixed system modelling using SystemVerilog, Matlab, Octave or similar.
Knowledge of DSP, Digital RTL, RF/AMS IP, and production test advantageous.
Role
Design and simulate high accuracy analog mixed-signal IC blocks amplifiers, DAC/ADC, regulators, filters, PLLs, DC-DC converters, mixers.
RF and analog mixed-signal design flow, from specification to silicon validation.
IC design peer reviews.
Top level verification of analog mixed signal IPs, ICs, and SoCs.
Oversee physical implementation and post layout simulation.
Silicon evaluation and production testing for analog and mixed-signal blocks.
Collaborate with multi-disciplinary teams, including digital, software, and test engineers. ....Read more...
Type: Permanent Location: Abingdon, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £90000 Per Annum None
Posted: 2025-03-18 11:48:44
-
We are looking for a Senior RF Antenna Design Engineer to help develop next generation of satellite communication antenna systems.
Reporting to the Director, you will lead EM simulations, measurements, and analysis for dielectric lenses, feed antennas, and phased arrays.
This role focuses on designing and optimising antennas using EM simulations and prototypes.
Experience in phased arrays, transmit, RF lenses, microstrip antennas, and metamaterials is highly valuable.
Knowledge of RF circuits, scripting, and RF measurement tools is a plus.
Key Responsibilities
Design and analyse antennas (feed antennas, dielectric lenses, arrays, radomes).
Develop antennas for manufacturing and prototypes.
Analyse results using Matlab and Python to optimise models.
Lead or assist in antenna testing and measurements.
Present findings through reports and slides.
Requirements
5 years in antenna design and analysis (lenses, phased arrays, radomes, beamforming).
Proficient in EM simulation tools like HFSS, CST, or FEKO.
Strong skills in Matlab, Python, and RF testing equipment.
Experience with Linux and leadership abilities ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £75000 Per Annum None
Posted: 2025-03-18 11:47:39
-
Catfoss Recruitment Ltd are currently in partnership with an award-winning specialist manufacturing company based in Oxfordshire and they are looking to recruit a Multi-Skilled Maintenance Engineer with an Electrical Bias on a permanent basis to their expanding team.
Mon - Fri Days + Overtime & Bens - flexible start times 7am/8am/9am
As a Maintenance Engineer you will be responsible for the routine and preventative maintenance onsite.
Maintenance Engineer (Electrical Bias) - Roles and Responsibilities
Carry out routine maintenance work and respond to equipment faults
Ensure all automation within the business operates efficiently and effectively by carrying out regular inspections and diagnosing faults
Overcome unplanned problems and where possible carry out repairs
Work with other maintenance engineers to design and implement a preventative maintenance plan
Work with specialist equipment, such as programable logic controllers (PLC)
Facilitate installations of new machinery, automation projects and partake in site improvement projects
Carry out all work in line with company Health and safety guidelines
Ensure that your working area is kept in a safe and tidy
Maintenance Engineer (Electrical Bias) - Mandatory Responsibilities
All employees have the following responsibilities:
Working in accordance to the company health and safety policy to take reasonable care for their own and colleagues health and safety.
Adhere to the Company's H&S requirements (i.e.
risk assessments, work instructions and through training).
Work in accordance with information and training provided, and not undertake any task for which authorisation and / or training has not been given.
Desires, Knowledge, Skills and Experience
A proactive work ethic
Good at establishing working relationships with both internal staff and external suppliers, developing relationships and using those relationships to drive behaviours
Results oriented person that will constantly challenge the way things are done
Mechanical and hydraulic maintenance
Electrical maintenance
Injection / compression moulding
Qualifications: C&G/NVQ/BTEC/HNC/HND Electrical Engineering
Maintenance Engineer previous suitable job titles: Maintenance Engineer, Maintenance Technician, Electrical Engineer, Multi-Skilled Maintenance Engineer, Multi-Skilled Engineer, Shift Engineer, Electrical Maintenance Engineer, Electrical Maintenance Technician
Please apply ASAP ....Read more...
Type: Permanent Location: Chipping Norton, England
Start: ASAP
Salary / Rate: £44000.00 - £51000.00 per annum + DOE + OT + Bens - Mon - Fri Days
Posted: 2025-03-18 11:25:06
-
Heating Engineer
Oxfordshire
£38,000 - £45,000 + Overtime + Progression + Training + Company Car + Fuel Card + Training Provided + Pension + Immediate Start
Fantastic opportunity for an experienced heating engineer to join a family-run business with a passion for providing sustainable and renewable heating solutions.
This company values innovation and encourages their team members to bring their own ideas to the table.
With a culture that is both flexible and supportive, this is a great opportunity for progression and the chance to develop your skills in the renewable energy sector.
If you are looking for a great new position with overtime and exciting projects then this is the role for you!
As an Experienced Heating Engineer, you will be at the heart of delivering quality heating systems for both residential and commercial clients.
This growing company specialises in high-quality air-source systems, as well as other renewable energy solutions.
This company is also involved with design, installation, and maintenance of energy systems.As a family-run business, this company fosters a culture of understanding and open communication, where your ideas and contributions will be valued.
Your Role As A Heating Engineer Will Include:
Installing, maintaining, and repairing heating systems
Running 2-3 heat pump services a day
Running pipe works on site
The Successful Heating Engineer Will Have:
Air source heat pump experience
Heat pump training
NVQ2 in plumbing
If you are interested in this position please contact Sai on 07537153941
Keywords: Heating Engineer, Family-run Business, Heating Solutions, Supportive, Progression Renewable Energy Sector, Air-Source Systems, Design, Installation, Communication, Repairing Heating Systems, Heat Pumps, NVQ2, City and Guilds, Plumbing, Wallingford, Oxfordshire, Warborough Nuffield, Didcot, Upton, Dorchester, Ewelme, Shillingford ....Read more...
Type: Permanent Location: Wallingford, England
Salary / Rate: £38000 - £45000 per annum + Overtime + Progression
Posted: 2025-03-18 10:58:46
-
Controls Engineer required for a reputable engineering & manufacturing company, employing over 500 staff across the world.
This long-established organisation supplies a variety of industries with complex flow control products, including Valves, Pumps and Actuators. This organisation recently decided to make significant investment (worth circa £1.8m) into their Leeds site, which will include a full overhaul of the workspace and facilities.
Due to continued demand for their versatile product range, this organisation is recruiting for several positions including a Controls Engineer. This opportunity is based in LEEDS, meaning the successful Controls Engineer will be easily able to commute from surrounding areas including Bradford, Huddersfield, Wakefield, Dewsbury and Bingley.
This position will also require travel to sites for periods typically no longer than 2 weeks at a time.
Key Responsibilities of the Controls Engineer will include;
Develop control solutions for complex multi-axis machines, systems and applications via in-house programming and testing
On site commissioning
Product development
Provide field service and customer support
For the role of Controls Engineer, we are keen to receive applications from individuals who have;
Knowledge of Siemens S7 (TIA Portal)
Advanced PLC programming skills such as SCL
Experience working with WinCC and HMI designs
Knowledge of Electrical controls regulations
Ideally knowledge of Rockwell PLC platforms
Proven experience in a similar role
Salary & Benefits;
£60,000 - £65,000
30 Days annual leave
Flexible working hours & Hybrid working
8% Combined pension (3% employer/ 5% employee)
Company Sick Pay after 12 months employment
To apply for the Controls Engineer position, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Leeds, England
Start: ASAP
Salary / Rate: £60000.00 - £65000.00 per annum
Posted: 2025-03-18 10:41:55
-
Based in the area of Dewsbury, the working hours for this Electrical Maintenance Engineer role is between Monday and Friday DAYS ONLY.
The hours of work 7am-4pm total 40 hours per week.
This Electrical Maintenance Engineer role offers a salary of £44,000, plus company pension matched to 10% and generous holiday allowance, plus 5% yearly KPI bonus.The company is a leading manufacturing business with a huge network of manufacturing plants across the country and a fantastic reputation as leaders in their sector.What's in it for you as Electrical Maintenance Engineer
Electrical Maintenance Engineer role with a leading UK manufacturer with 42 sites across the country
Basic salary circa £44k per annum
Certified top-tier training opportunities and career development
Hours of work are around 7am to 4:00pm (40 hours per week)
Company pension matched up to 10% by the company
Industry leading benefits program, share option schemes, employee benefits program etc
Duties of Electrical Maintenance Engineer
Assisting with maintenance plans, driving PPMs and performing reactive maintenance
Undertaking improvement projects as part of the maintenance team
Responsible for identifying and eliminating recurring plant issues through engineering improvements
Hands on maintenance and engineering plant development
Experience and Qualifications Required for Electrical Maintenance Engineer
Engineering qualifications: Full Advanced Apprenticeship in Electrical Engineering or City & Guilds level 3, NVQ Level 3 AND ONC, BTEC Level 3, or equivalent qualification in Electrical Engineering
Strong Health and Safety awareness
Previous experience as a Maintenance Engineer, Electrical Maintenance Engineer or Lead Engineer etc
Previous experience of undertaking maintenance within a manufacturing environment
Previous experience of the development and application of PPM activities and knowledge of reactive maintenance techniques
If this is something of interest to you and you are wishing to develop you career with an industry leading manufacturer then Please apply now! ....Read more...
Type: Permanent Location: Dewsbury, England
Start: ASAP
Salary / Rate: Up to £44000.00 per annum
Posted: 2025-03-18 10:41:38
-
Senior Electronics Engineer required to join a growing team designing and developing motion systems and control algorithms for motor, valve and other mechatronic applications.
Requirements
Extensive experience in electronics development for industrial applications.
PCB design, power electronics, EMI or EMC testing, and simulation.
Linear, SMPS, signal conditioning, and driver circuit design.
PSpice and LTspice.
Hardware architecture design, microcontroller-based designs, and testing for compliance.
Degree and ideally Masters in Electronics, Mechatronics, Embedded Electronics or similar subject.
Full hardware development life cycle, including verification and validation.
Wireless communication protocols and high speed PCB design knowledge.
Responsibilities
Design and develop innovative, cost-effective electronics and controls for proportional valves.
Develop designs, specifications, and recommendations for new and existing product electronics control boards.
Technical peer reviews and provide solutions to complex development and field issues.
Oversee testing and validation, ensuring products meet required certifications. ....Read more...
Type: Permanent Location: Waterlooville, England
Start: ASAP
Duration: Permanent
Salary / Rate: £48000 - £70000 Per Annum None
Posted: 2025-03-18 10:34:14
-
A globally leading Chemical Manufacturer based in Middlesbrough are on the lookout for an experienced Instrument Engineer to join their team!
As an integral member of the EC&I Team, the Instrument Engineer will be responsible for the design, development, installation and management of all instrumentation systems across the site.
Salary and Benefits of the Instrument Engineer:
Annual Salary up to £55,000 (DOE)
36 Holidays (Inclusive of Bank Holidays)
Competitive Company Pension Scheme
Days Based Role: Monday - Friday
Incentive Bonus Scheme Paid Quarterly
Role of the Instrument Engineer:
As the Instrument Engineer, you will provide technical support to the maintenance technicians as well as supporting the manufacturing facilities in production.
You will contribute and deliver capital projects and ensure regulatory compliance.
Key Responsibilities:
Develop and design instrumentation and control systems for new and existing processes.
Create detailed specifications and design documentation for instrumentation systems.
Oversee the installation and commissioning of instrumentation and control systems and manage installation contractors.
Conduct site inspections and testing to ensure proper installation and functionality.
Collaborate with project teams to integrate instrumentation systems into overall plant operations.
Develop and implement maintenance schedules for instrumentation and control systems.
Essential Skills and Qualifications for the Instrument Engineer position:
A degree in Instrumentation Engineering, Electrical Engineering or a related field.
Strong working knowledge of COMAH and ATEX Regulations and safety standards.
Proficiency in instrumentation and control system design.
Experience of working in a Chemical Manufacturing environment.
How to apply: To apply for the position of Instrument Engineer, please submit your cv direct!
....Read more...
Type: Permanent Location: Stockton-on-Tees, England
Start: ASAP
Salary / Rate: £50000.00 - £55000.00 per annum + (DOE) - 36 Holidays, Bonus, Pension
Posted: 2025-03-18 10:07:54
-
Band Saw Operator
Loughborough LE11
Temp to Perm
Hours of work
Mon - Thurs
0730 - 1630
Mon - Thursday
Friday
0730 - 1230
Starting pay rate - £13.50 per hour
Are you an experienced Band Saw operative with some Engineering Experience? If yes, read on
.
My client is a large manufacturing company based in Leicester.
They are currently searching for a new band saw operative/saw operator to join their team.
Commutable from areas including Leicester,Mount Sorrel, Nottingham, Coalville, Ashby de la Zouch and surrounding areas
The Role - Band saw operator/operative
- Cutting metal using a band saw
Minimum Skills / Experience Required - Band Saw Operator
- Experience using a band saw to cut sheet metal
- Awareness of health and safety legislation
- Good communication skills
- Willingness to take further appropriate training
- Highly Motivated
The Package - Band Saw operative /operator
- Starting rate of £13.50 per hour
About Precision People
Precision People is a leading recruitment agency that specialises in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries.
With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership.
Precision People has the expertise and resources to help you find the perfect role.
With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates expectations.
Interested?
To apply for the Band Saw position, here are your two options:
1.
"This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Sharon Pickering on 0116 254 5411 between 8.30am - 5.30pm.
2.
"I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.
INDTEMP ....Read more...
Type: Contract Location: Loughborough,England
Start: 18/03/2025
Duration: 1.0 HOUR
Salary / Rate: £13.50 per hour
Posted: 2025-03-18 09:24:08
-
Technical Support EngineerBack-Office SolutionsMaidstone, KentUp to £36,000
We're working with a leader in outsourced back-office solutions to search for a Technical Support Engineer to join them on-site at their new offices just outside of Maidstone.
The organisation has technology at their core and utilises bespoke software platforms to consult with their customers and provide back-office outsourcing solutions to SMEs across the UK.
This role will lean more on project delivery.
Key Responsibilities:, Provide 1-3rd Line Support to 100+ users., End-to-end technical project delivery., Ensure seamless operation and security of IT infrastructure.
Background required:, Strong technical support background covering Windows 10/11 Desktop, Windows Server 2019+, Firewalls, VPNs, Hyper-V/Server Virtualisation, M365 administration/configuration., Some project delivery experience., Working independently rather than part of a larger/wider team.
What's on offer:, Starting salary up to £36,000, 26 and a half days leave + bank holidays (increasing with service), Buy and sell holiday scheme, Private Healthcare Insurance + Virtual Private GP, Retail Discounts, Pension, Income Protection, Life Cover + much more
....Read more...
Type: Permanent Location: Maidstone, England
Start: asap
Salary / Rate: £30000 - £36000 per annum
Posted: 2025-03-18 09:21:54
-
Brake Press Operator
Location: Romsey
Salary: £14-£16 per hour
Hours: 40 hours per week (Day shift)
Overview:
Holt Engineering are working with a leading provider of metal fabrication services, specialising in high-quality multi-material products for both residential and commercial applications.
We are seeking a skilled Brake Press Setter and Operator to join their dynamic team.
Brake Press Operator Responsibilities:
- Setting up and operating brake presses to produce high-quality metal components.
- Reading and interpreting engineering drawings and specifications.
- Ensuring accurate measurements and tolerances are maintained.
- Selecting appropriate tooling and equipment for each job.
- Maintaining and troubleshooting brake press machines.
- Adhering to safety regulations and procedures.
Brake Press Operator Requirements:
- Proven experience in brake press setting and operation.
- Ability to read and interpret engineering drawings.
- Strong mechanical aptitude and problem-solving skills.
- Attention to detail and commitment to quality.
- Ability to work independently and as part of a team.
Brake Press Operator Benefits:
- Competitive salary and benefits package
- Opportunities for professional development
- Stable and secure employment
- Working in a friendly and supportive environment
If you are a skilled Brake Press Operator with a passion for metal fabrication and a desire to join a growing company, we encourage you to apply.
How to apply for the Brake Press Operator role:
If you interested in the role, please apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Romsey,England
Start: 18/03/2025
Salary / Rate: £14 - £16 per annum
Posted: 2025-03-18 09:02:04
-
Quality Engineer
Location: Lymington
Salary: £34-37k
Quality Engineer Overview
Holt Engineering are working with a group of companies that specialise in the manufacturing of global high-performance sensors.
As a result they are currently looking for a Quality Engineer to continue maintaining their quality control systems.
Quality Engineer Responsibilities:
- Acts as Quality function lead for QEHS, supporting the wider Quality, Environmental and Health & Safety functions.
- Provide incoming inspection of drawing items.
- Participate in Process Improvement activities, provide advice and practical assistance in implementing process improvements.
- To complete root cause analysis and investigations on production defects, supplier deliveries and customer returns.
- Comply with and update QMS systems.
Quality Engineer Requirements:
- Strong working knowledge of QMS, ISO 9000:2015.
- Experience in Quality / Process Improvement in a manufacturing and design industry.
- Experience with incoming inspection techniques for mechanical and electrical products.
- Demonstrable track record of implementing and driving measurable improvement programs.
- Ability to achieve results in a fast-moving, technological environment.
- Strong problem-solving skills and detail-orientated, proactive and committed to delivering product reliability and customer satisfaction.
Quality Engineer Benefits:
- Casual dress
- Company events
- Company pension
- Cycle to work scheme
- Free flu jabs
- Free parking
- On-site parking
- Sick pay.
How to apply for the Quality Engineer role:
Please apply directly, or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Lymington,England
Start: 18/03/2025
Salary / Rate: £34000 - £37000 per annum
Posted: 2025-03-18 09:01:04
-
Manufacturing Engineer
Location: Fareham
Salary: £50k
Manufacturing Engineer Overview:
We are currently working with an international manufacturer providing world-class solutions to the aerospace, defence, nuclear and oil and gas sectors.
Your role as a Manufacturing Engineer will assist in developing best common practices and executing manufacturing engineering strategies in a vertically integrated engineering company.
Your task is to contribute to engineering solutions across multiple industries.
Manufacturing Engineer Responsibilities:
- Plan and implement safe, repeatable, and efficient production systems, processes, equipment, and facilities.
- Troubleshoot and problem-solve with internal and external stakeholders.
- Determine methods, tooling, and processes required for manufacturing.
- Compile manufacturing routings and BOMs within the company's MRP system.
- Use 3D design software to design tooling and assembly aids.
- Produce, update, and improve internal manufacturing specifications.
- Travel to supplier or customer sites to assist with technical challenges.
- Estimate manufacturing costs, including recurring and non-recurring costs.
- Contribute to new product introduction, development, and prototyping.
- Support APQP by facilitating FMEA plans, process flow diagrams, and control plans.
- Support business growth through research and implementation of new manufacturing systems.
- Provide technical support for production (assembly and machining) during change implementation.
Manufacturing Engineer Requirements:
- Minimum qualification HNC.
- Experience in a high-precision manufacturing environment.
- Understanding of manufacturing and design tolerances.
- Some experience with metal treatments or unconventional machining.
- ERP experience.
- Experienced MS Office user.
- AutoCAD 2D or 3D design experience.
- Experience using process mapping techniques.
- Welding knowledge would also be preferable.
- Experience in compiling technical documentation used in manufacturing.
How to apply for the Manufacturing Engineer role:
Please apply directly, or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Fareham,England
Start: 18/03/2025
Salary / Rate: £45000 - £50000 per annum
Posted: 2025-03-18 08:58:03
-
CNC Turner
Location: Finchampstead
Salary: £17.50 - £18 per hour
Shift: Days with overtime opportunities
Are you a skilled CNC Turner looking for a challenging and rewarding role in the high-performance engineering industry?
Holt Engineering are seeking a talented CNC Turner Programmer to join our client in Finchampstead.
The ideal candidate will have extensive experience in programming and operating CNC lathes using Mazak/Mazatrol controls, with a focus on precision machining for the Formula 1 industry.
CNC Turner Responsibilities:
- Programming and setting CNC lathes using Mazak/Mazatrol controls.
- Interpreting complex engineering drawings and specifications.
- Creating efficient machining programs to optimise production time.
- Ensuring high-quality components are produced to tight tolerances.
- Troubleshooting and resolving machine issues.
- Collaborating with the engineering team to develop new products and processes.
CNC Turner Requirements:
- Proven experience in CNC turning, with a strong focus on Mazak/Mazatrol controls.
- Strong understanding of machining processes and materials.
- Ability to read and interpret engineering drawings.
- Strong attention to detail and commitment to quality.
- Comfortable working both as an individual or as a team.
How to apply for the CNC Turner role:
If you are a highly skilled CNC Turner with a passion for precision engineering, please either apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk. ....Read more...
Type: Permanent Location: Finchampstead,England
Start: 18/03/2025
Salary / Rate: £18 - £19 per hour
Posted: 2025-03-18 08:56:04
-
CNC Miller Turner
Salary: £18-£21 per hour
Shift: 40 hours per week
Are you a skilled CNC Miller or Turner with a passion for precision engineering?
Holt Engineering are seeking talented CNC Millers or Turners to join our client in Portsmouth.
The ideal candidate will have extensive experience in programming and operating CNC milling and turning machines, with a focus on Fanuc controls.
Experience in precision machining for the defence, aviation, and medical industries is highly desirable.
CNC Miller Turner Key Responsibilities:
- Programming and setting CNC milling and turning machines using Fanuc controls.
- Interpreting complex engineering drawings and specifications.
- Creating efficient machining programs to optimise production time.
- Ensuring high-quality components are produced to tight tolerances.
- Troubleshooting and resolving machine issues.
CNC Miller Turner Requirements:
- Proven experience in CNC milling and turning programming operations.
- Strong knowledge of Fanuc controls.
- Experience with twin spindle or twin turret machining (preferred).
- Strong attention to detail and commitment to quality.
How to apply for the CNC Miller Turner role:
If you have a passion for precision engineering, we encourage you to apply directly, or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Hilsea,England
Start: 18/03/2025
Salary / Rate: £37500 - £43000 per annum
Posted: 2025-03-18 08:53:04
-
CNC Grinder
Location: Lee-on-the-Solent
Salary : £16-18 p/h
CNC Grinder Overview
My client is a global leader in the aerospace industry and is looking for a skilled CNC Grinder to join their team on a permanent basis.
They are committed to providing their customers with the highest quality products and services.
Operating to the highest standards of the aerospace industry, they manufacture and supply a wide range of products and services and are always looking for talented individuals to join their team.
The ideal candidate will have a strong understanding of aerospace technology, able to work independently and as part of a team, work safely and efficiently, and will be committed to continuous improvement.
CNC Grinder Role & Responsibilities:
- Able to use Surface & Cylindrical Grinding machines (Jones & Shipman preferred)
- Internal & external grinding
- Inspect your work using a range of hand tools
- Liaising with other departments such as Quality and Design
- Previous aerospace, defence, nuclear or similar industry experience would be ideal
- Able to work from technical drawings
- Comfortable setting and operating CNC Grinding machines
- Day shift
How to Apply for the CNC Grinder role:
Please apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: LeeontheSolent,England
Start: 18/03/2025
Salary / Rate: £16 - £18 per hour
Posted: 2025-03-18 08:51:04
-
Honing Operative
Location: Andover
Salary: £12-13 p/h
Holt Engineering is seeking a skilled and motivated Honing Operative to join our client's expanding team.
As one of the premier precision machining companies in their field of expertise, they are able to offer full turnkey solutions to a variety of industries including Tier 1 Defence Primes.
Due to this they are looking for diligent and conscientious individuals to work to specific production timelines.
Honing Operative role:
As a Honing Operative, you will be responsible for operating specialised machinery to create precise, deep holes in various materials as well as hone them to tight tolerances.
This is a critical role in the manufacturing process, requiring a high level of skill and attention to detail.
Honing Operative Responsibilities:
- Set up and operate honing machines, adjusting parameters and monitoring the manufacturing process.
- Select and prepare appropriate tools, fixtures, and coolants for each job.
- Conduct regular inspections to ensure holes meet required dimensions, straightness, and surface finish.
- Diagnose and troubleshoot issues that may arise during the drilling process.
- Maintain honing machines and associated equipment.
- Adhere to all safety regulations and guidelines.
Honing Operative Requirements:
- Proven experience in honing or a related machining discipline.
- Strong mechanical aptitude and understanding of machining principles.
- Ability to read and interpret engineering drawings and blueprints.
- Experience with precision measurement tools and techniques.
- Excellent attention to detail and accuracy.
- Ability to work independently and as part of a team.
To Apply for the Honing Operative role:
Please either apply directly, or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Andover,England
Start: 18/03/2025
Salary / Rate: £12 - £13 per hour
Posted: 2025-03-18 08:50:07
-
CNC Miller
Location: Cirencester
Salary: £16-18 per hour DoE
Shift: Day Shift
Are you a skilled CNC Miller with experience in Mazak or Heidenhain controls?
We are seeking a talented CNC Miller to join our medium sized client in Cirencester.
They specialise in producing unique and bespoke metalwork subcontract services for Aerospace, Defence and Medical sectors.
The ideal candidate will have a strong understanding of CNC machining processes and be proficient in setting and operating CNC milling machines.
CNC Miller Key Responsibilities:
- Setting up and operating CNC milling machines with Mazak and Heidenhain controls.
- Interpreting engineering drawings and technical specifications.
- Comfortable working with offsets and tooling changes.
- Ensuring high-quality production and adherence to tight tolerances.
- Maintaining and troubleshooting CNC machines.
- Working collaboratively with the team to meet production targets.
CNC Miller Essential Skills and Experience:
- Proven experience in CNC milling, including setting and operating machines.
- Strong knowledge of Mazak and Heidenhain controls.
- Experience with various machining processes and materials including aluminium and other exotics.
- Good understanding of quality control and inspection procedures.
How to apply for the CNC Miller role:
If you are interested in the role, please either Apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Cirencester,England
Start: 18/03/2025
Salary / Rate: £16 - £18 per hour
Posted: 2025-03-18 08:48:11
-
CNC Miller Team Leader
Location: Totton
Salary: £40,300
CNC Miller Team Leader Overview
Holt Engineering are passionate about precision engineering and contributing to some of the most exciting and complex projects in the aerospace and defence sectors.
We work with leading-edge technologies and collaborate with world-class clients to deliver exceptional results.
We are seeking a highly motivated and skilled CNC Miller Section Team Leader / Machine Operator to join our dynamic client.
In this key role, you will be responsible for leading and mentoring a team of machinists while also contributing directly to the production process.
CNC Miller Team Leader Responsibilities:
- Set and operate CNC milling machine tools.
- Setting of cutting tools, machine tool and work piece datums.
- Assess tool condition and maintain as necessary.
- Conduct self-inspection of work in accordance with planning layouts and customer drawings.
- Manage daily production requirements and address performance issues.
- Provide training for new or temporary employees.
- Undertake Return to Work interviews, conduct performance reviews, and ensure a safe working environment.
- Liaise with management regarding production issues and improvements.
- Hold team meetings and act on feedback received.
CNC Miller Team Leader Requirements:
- Proven experience in operating CNC milling machines, ideally with Mazak experience.
- Ability to produce high-quality, tight tolerance components in a variety of materials.
- Supervisory experience is highly desirable.
- Strong communication and interpersonal skills.
- Ability to work effectively both independently and as part of a team.
- Excellent attention to detail and a commitment to safety.
CNC Miller Team Leader Benefits:
- Competitive salary and benefits package.
- 25.5 Days annual leave (Plus Bank Holidays)
- Christmas shut down
- Company sick pay scheme
- Cycle to work scheme
- On-site parking
How to Apply for the CNC Miller Team Leader role:
Please apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Totton,England
Start: 18/03/2025
Salary / Rate: £38000 - £40300 per annum
Posted: 2025-03-18 08:47:04
-
Chief Quality Inspector
Location: Reading
Salary: c.
£45k
Holt Engineering are seeking a highly experienced and meticulous Chief Quality Inspector to join our clients dynamic team.
If you possess a strong background in precision engineering, a deep understanding of aerospace quality standards, and proficiency in Aberlink CMM operation, we want to hear from you!
Chief Quality Inspector Overview:
As our Chief Mechanical Quality Inspector, you will be responsible for ensuring the highest quality standards are met throughout our manufacturing processes, particularly in the production of aerospace components and sheet metal fabrications.
You will lead a team of inspectors, oversee inspection procedures, and utilise your expertise with Aberlink CMM to guarantee dimensional accuracy and compliance.
Chief Quality Inspector Responsibilities:
- Develop and implement inspection procedures and quality control plans.
- Perform detailed inspections of aerospace components and sheet metal fabrications using Aberlink CMM and other precision measuring equipment.
- Program and operate Aberlink CMM to perform complex dimensional inspections.
- Interpret engineering drawings, specifications, and GD&T (Geometric Dimensioning and Tolerancing).
- Identify and resolve quality issues, implementing corrective and preventative actions.
- Maintain accurate inspection records and documentation.
- Ensure compliance with AS9100 and other relevant aerospace quality standards.
- Conduct internal audits and participate in external audits.
Chief Quality Inspector Requirements:
- Extensive experience as a Quality Inspector in the aerospace industry.
- Proven proficiency in programming and operating Aberlink CMM.
- Strong understanding of aerospace quality standards (AS9100).
- Experience with sheet metal fabrication inspection.
- Expertise in interpreting engineering drawings and GD&T.
- Excellent knowledge of precision measuring equipment and techniques.
- Excellent problem-solving and analytical skills.
- Strong attention to detail and a commitment to quality.
Chief Quality Inspector Benefits:
- 4 day working week.
- Competitive salary based on experience and skills.
- Opportunity for professional growth and development in a leading aerospace company.
- Access to state-of-the-art inspection equipment and technology.
- Supportive and collaborative team environment.
- Overtime opportunities may be available.
How to apply for the Chief Quality Inspector role:
If you have the skills required, please apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Reading,England
Start: 18/03/2025
Salary / Rate: £45000 - £50000 per annum
Posted: 2025-03-18 08:43:04
-
Job Title: Bus Network Planning Manager
Salary: £50,000 - £55,000
Hours: 37.5-hour week with flexibility depending on business requirements.
Overtime may be required, with time off in lieu to be agreed with the Head of Commercial.
Reporting to: Head of Commercial
Job Location: Based in Oxford, with travel to other locations and depots in the surrounding areas, as necessary.
Job Purpose:
Oversee the development of efficient timetables, duties, and rotas that adapt to meet customer needs and stakeholder expectations.
Ensure the Planning team provides high-quality data to the Operations, Commercial, and Finance teams to support smooth operations, data analysis, and decision-making.
Main Duties and Responsibilities:
- Collaborate with the Head of Commercial to develop proposals for the ongoing evolution of bus networks, ensuring services align with the needs of customers, local authorities, and stakeholders.
- Compile timetables that meet customer demand while supporting business and stakeholder goals.
- Develop duties and rotas in line with agreed timescales, balancing colleague needs and schedule efficiency, to thrive in a challenging labour market.
- Continuously review service performance using tools like PowerBI and CitySwift, optimizing running time and timetable simplicity.
- Work with the Head of Commercial to evaluate and configure new commercial systems as needed.
- Support the Head of Commercial in modelling scenarios for new business development opportunities.
- Identify and implement schedule efficiency improvements in collaboration with local Operations teams.
- Manage the Commercial Officer/Coordinator roles, ensuring high standards and maintaining a Continuous Professional Development plan for their technical and soft skill growth.
- Assist the Commercial and Finance teams in responding to requests for information on audits, BSIP schemes, and reporting.
- Collaborate with the Publicity and Data & Ticketing teams to share timetables and ensure BODS compliance and high-quality customer information.
- Prepare and submit Traffic Commissioner informational letters as requested by operational management.
- Serve as an ambassador for the company and the public transport sector.
- Operate in line with the companys vision and values, encouraging others to do the same.
- Undertake any other duties as requested by the Head of Commercial.
Benefits:
- Free travel
- Loyalty bonus
- Contributory pension
- Lifestyle discount scheme
- Employee assistance programme
- 25 days of holiday, plus 8 days allowance (pro-rata)
Promotion Prospects:
We actively encourage internal development and offer opportunities for advancement within the company.
Person Specification
Essential:
- Experience leading network planning and schedule changes, including consultation with Operations and Union colleagues.
- Proficiency in scheduling software (e.g., Omnibus, Hastus, Trapeze).
- Minimum of 5 GCSEs, including Maths and English at Grade C or above (or equivalent).
- Valid car licence.
Desirable:
- Degree-level qualification.
- Knowledge of the bus industry.
- PSV licence and DQC.
Special Aptitudes:
- Adaptability to different company cultures and working styles.
- Willingness to learn and attend training courses.
- Excellent written and verbal communication skills.
- Strong problem-solving ability and follow-through.
- Ability to engage with colleagues at all levels.
- Ability to remain confident, calm, and patient in a fast-paced environment.
- Structured approach to work, with the ability to prioritise and meet deadlines.
Interests:
- Passion for delivering high-quality service.
- Interest in public transport.
How to Apply: If you are a motivated and experienced professional looking to take the next step in your career, we would love to hear from you.
Please apply with your CV or call Dudley on 07485 390 942
Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments ....Read more...
Type: Permanent Location: Oxford,England
Start: 18/03/2025
Salary / Rate: £50000 - £55000 per annum
Posted: 2025-03-18 08:27:10
