-
Validation and Verification Technician required to work within an iterative design process test facility preparing and conducting engineering tests and report results.
The role requires a combination of practical skills an understanding of Quality Management and the impact of non conformances on the performance of equipment and systems.
Skills
General mechanical fitting or electrical experience.
Assist with the design and development of mechanical and electrical test fixtures.
Undertake timely diagnosis and fault finding
Experience in an electrical or mechanical apprenticeship, ONC or HNC in engineering, NVQ or CandG level 3 in mechanical or electrical engineering.
Responsibilities
Ensure all test activities are conducted safely.
Participate in creation and review of Hazard Analysis and Risk Control for these activities.
Be familiar with inspection and test procedures, standard work and test plans, and provide input to continuously improve them.
Use the guiding principles and tools of the QMS to drive continuous improvement, wherever applicable. ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £36000 Per Annum None
Posted: 2025-12-23 10:09:02
-
A Production Test Technician is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and verification of high-quality electronic products.
The Production Test Technician, Essex, will play a key role within Pickering's production test team, ensuring the reliability and performance of electronic systems through precise testing, continuous process improvement, and fault analysis.
Responsibilities include:
Working to implemented electronic test plans and procedures.
Performing tests on systems, including both hardware and software components.
Ensuring the reliability and accuracy of test results through continuous improvement initiatives.
Developing a thorough understanding of Pickering's products and systems.
Producing detailed reports of faults found to support ongoing product enhancement.
Assisting in the development of ATE test programs for new products.
Fault finding down to component level and carrying out clean, accurate repairs.
Adapting to new test methods and associated test fixtures/cables.
The Production Test Technician, Essex, will have the following key skills:
A higher-level qualification in Electrical or Electronic Engineering, such as HNC or BTEC Level 3.
Some experience in electronic test, ideally within a manufacturing or R&D environment.
Strong knowledge of electronic test methodologies, tools, and equipment.
Ability to fault-find and test down to component level.
Awareness of industry standards such as ISO 9001 and IPC.
Excellent problem-solving skills, attention to detail, and effective communication.
APPLY NOW - the Production Test Technician job in Essex could be of interest, send your CV to ADighton@RedlineGroup.Com
Or call Adam Dighton on 01582 878821 / 07961 158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £28000 - £31000 per annum
Posted: 2025-12-23 09:53:39
-
JOB DESCRIPTION
Position Purpose:
This position is accountable for designing and leading strategic CapEx engineering projects within our Manufacturing Operations.
This includes the engineering design and physical execution of $250,000+ capital projects, project management ownership from design through startup, and long-range strategic technical planning for the business.
The role also leads the development of engineering design specifications, guidelines, and standards.
Principle Accountabilities:
Responsible for capital project execution including equipment selection, technical and financial justification, CapEx management, purchasing, installation/construction, and start-up support efforts
Engineering Design Leadership - Develop and manage engineering design specifications and Techno-Economic Models including process design, P&ID, mass and energy balances, equipment sizing, and financial analyses (CapEx, OpEx, NPV)
Support & bolster the Engineering Work Process providing strategic direction and support to build and enhance the work process
Engineers within the team on large projects can be assigned specific portions of capital projects based on expertise and workload availability including project management, technical design of packaging equipment & paint making/processing equipment, and construction management.
Project Management - Manage projects using the Engineering Work Process from conceptual design through successful startup transition to the local plant team.
This includes managing budget, timeline, and deliverables to ensure the project meets established success criteria.
Design - Recommend and implement manufacturing systems that are designed for machine and human interaction, method/process, raw material & environmental variability.
Design solutions to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and minimize production losses.
Construction Management - Manage contractors, technicians, skilled trades, and internal resources to safely install and startup manufacturing systems.
This includes working with the plant operational teams on training, standard operating procedures, and identification of spare parts.
Apply the Process Safety Management (PSM) regulations, applicable building codes, and NFPA fire code to capital projects and design specifications
Manage external Engineering Firm resources on large capital projects
Frequent interface with corporate staff, plant staff, operators, and maintenance personnel across a 3-shift operation
Education/Experience Requirements:
BS in Chemical Engineering preferred.
Mechanical, Industrial, Manufacturing, Packaging, and Electrical Engineers with hands-on related experience will also be considered.
5 years Minimum in plant engineering support role with hands-on experience in engineering, process design, continuous improvement, troubleshooting equipment, project management and project start-up verification
Demonstrated strong organizational, interpersonal, and technical communication skills, with the ability to lead and thrive in fast-paced, multitasking environments
Commitment to safety, ethical behavior, and respect for people, ensuring adherence to industry standards, governmental regulations and company values
Willingness to travel frequently to support capital project assignments.
Travel will be variable, depending on ongoing project needs (~20-30%)From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 10.5 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-12-23 06:09:54
-
JOB DESCRIPTION
Position Purpose:
This position is accountable for designing and leading strategic CapEx engineering projects within our Manufacturing Operations.
This includes the engineering design and physical execution of $250,000+ capital projects, project management ownership from design through startup, and long-range strategic technical planning for the business.
The role also leads the development of engineering design specifications, guidelines, and standards.
Principle Accountabilities:
Responsible for capital project execution including equipment selection, technical and financial justification, CapEx management, purchasing, installation/construction, and start-up support efforts
Engineering Design Leadership - Develop and manage engineering design specifications and Techno-Economic Models including process design, P&ID, mass and energy balances, equipment sizing, and financial analyses (CapEx, OpEx, NPV)
Support & bolster the Engineering Work Process providing strategic direction and support to build and enhance the work process
Engineers within the team on large projects can be assigned specific portions of capital projects based on expertise and workload availability including project management, technical design of packaging equipment & paint making/processing equipment, and construction management.
Project Management - Manage projects using the Engineering Work Process from conceptual design through successful startup transition to the local plant team.
This includes managing budget, timeline, and deliverables to ensure the project meets established success criteria.
Design - Recommend and implement manufacturing systems that are designed for machine and human interaction, method/process, raw material & environmental variability.
Design solutions to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and minimize production losses.
Construction Management - Manage contractors, technicians, skilled trades, and internal resources to safely install and startup manufacturing systems.
This includes working with the plant operational teams on training, standard operating procedures, and identification of spare parts.
Apply the Process Safety Management (PSM) regulations, applicable building codes, and NFPA fire code to capital projects and design specifications
Manage external Engineering Firm resources on large capital projects
Frequent interface with corporate staff, plant staff, operators, and maintenance personnel across a 3-shift operation
Education/Experience Requirements:
BS in Chemical Engineering preferred.
Mechanical, Industrial, Manufacturing, Packaging, and Electrical Engineers with hands-on related experience will also be considered.
5 years Minimum in plant engineering support role with hands-on experience in engineering, process design, continuous improvement, troubleshooting equipment, project management and project start-up verification
Demonstrated strong organizational, interpersonal, and technical communication skills, with the ability to lead and thrive in fast-paced, multitasking environments
Commitment to safety, ethical behavior, and respect for people, ensuring adherence to industry standards, governmental regulations and company values
Willingness to travel frequently to support capital project assignments.
Travel will be variable, depending on ongoing project needs (~20-30%)From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 10.5 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-12-23 06:09:28
-
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team.
As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master's or Bachelor's degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude.
Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc100000 - Swiss Franc130000 per annum
Posted: 2025-12-22 01:13:35
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities.
Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods.
Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring.
Assist with New Employee Orientation including PSM initial training and HAZWOPER.
Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation.
Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary.
Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling.
Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions.
Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's.
Works with all personnel at the facility to make sure all applicable regulations related to the PSM program.
Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters.
Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance
Maintain and update Process Safety Information (PSI), including:
P&ID documentation
Pressure relief device calculations
Chemical hazard information
Conduct and document Process Hazard Analyses (PHAs).
Ensure Management of Change (MOC) procedures are properly implemented and completed.
Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC).
Assist in emergency shutdown procedure training and deviation correction protocols.
Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described.
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge.
Demonstrated organization, facilitation, communication and presentation skills.
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines.
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally.
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management.
Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance.
This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear.
The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs.
This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR.
Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures.
Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-12-18 14:08:25
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities.
Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods.
Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring.
Assist with New Employee Orientation including PSM initial training and HAZWOPER.
Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation.
Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary.
Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling.
Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions.
Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's.
Works with all personnel at the facility to make sure all applicable regulations related to the PSM program.
Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters.
Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance
Maintain and update Process Safety Information (PSI), including:
P&ID documentation
Pressure relief device calculations
Chemical hazard information
Conduct and document Process Hazard Analyses (PHAs).
Ensure Management of Change (MOC) procedures are properly implemented and completed.
Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC).
Assist in emergency shutdown procedure training and deviation correction protocols.
Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described.
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge.
Demonstrated organization, facilitation, communication and presentation skills.
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction.
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines.
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally.
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management.
Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance.
This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear.
The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs.
This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR.
Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures.
Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-12-18 14:08:21
-
An On-Site Test Rig Engineer is sought to join an industry-leading engineering organisation in Wolverhampton, contributing to the calibration, testing, and verification of production test rig equipment across electrical, mechanical, and hydraulic domains.
The On-Site Test Rig Engineer, Wolverhampton, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include calibration methods, metrology standards, test rig instrumentation, and engineering processes used in customer production environments.
Responsibilities include:
Work with wider engineering and quality teams to define calibration requirements and ensure test rig measurement systems remain compliant.
Perform calibration of electrical, temperature, load, force, flow and pressure instrumentation using approved procedures and metrology best practices.
Develop, review, and audit calibration procedures for customer equipment.
Create and maintain measurement uncertainty budgets for calibrations.
Maintain accurate and traceable calibration records, certificates, and documentation within internal management systems.
Support customer audits, accreditation visits, and internal quality assessments.
Collaborate with on-site engineering teams to investigate, diagnose, and resolve issues with customer test rig instrumentation.
Support additional engineering tasks as required, receiving training where needed.
Key skills & experience:
Formal qualification in an engineering discipline or extensive demonstrable calibration experience.
Electrical diagnostic background with strong understanding of calibration principles.
Knowledge of mechanical and hydraulic systems.
Experience with jig/tool recertification (advantageous).
Strong communication and reporting abilities.
Ability to work in a customer-focused environment, delivering high standards of service.
How to apply:
Apply now for the On-Site Test Rig Engineer role in Wolverhampton.
Send your CV to adighton@redlinegroup.Com
Or call Adam on 01582 878821 ....Read more...
Type: Permanent Location: Wolverhampton, England
Start: ASAP
Salary / Rate: £31000 - £37000 per annum
Posted: 2025-12-17 15:54:29
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities. Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods. Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring. Assist with New Employee Orientation including PSM initial training and HAZWOPER. Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation. Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary. Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling. Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions. Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's. Works with all personnel at the facility to make sure all applicable regulations related to the PSM program. Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters. Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance Maintain and update Process Safety Information (PSI), including: P&ID documentation Pressure relief device calculations Chemical hazard information Conduct and document Process Hazard Analyses (PHAs). Ensure Management of Change (MOC) procedures are properly implemented and completed. Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC). Assist in emergency shutdown procedure training and deviation correction protocols. Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described. Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge. Demonstrated organization, facilitation, communication and presentation skills. Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction. Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines. Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally. Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management. Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance. This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear. The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs. This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR. Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures. Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-12-17 14:13:28
-
JOB DESCRIPTION
Position Summary: The Process Safety/EHS Engineer will be responsible for targeted initiatives aimed at enhancing process control, safety, and operational efficiency.
This role will report directly to the EH&S Corporate Manager and collaborate closely with the Production Superintendent and Lab Manager.
Key responsibilities include process monitoring, preventive maintenance coordination, EHS compliance, and support for capital improvement projects.
Essential Functions:
Ability to conduct laboratory testing for the routine daily tests of products (simple titrations, Brookfield viscosity, Karl Fisher % moisture, & color as well as develop basic skills to operate gas chromatography).
Work directly with the Maintenance Technicians on CMMS preventative maintenance & work order - particularly where linked with compliance activities. Have a working knowledge of the safe and effective handling for Arnette Polymer's raw materials, intermediates, and finished goods. Works with the EH&S Corporate Manager to assist and administer the scheduling, verification, and participation in all environmental and safety training as required by Federal, State, County, and Local regulation as well as company policies.
Assist with Contractor Orientation and Compliance Monitoring. Assist with New Employee Orientation including PSM initial training and HAZWOPER. Work with the Production Superintendent to verify inventory control measures through shift paperwork / batch ticket review, cycle count, and transfer documentation. Work with the Production Superintendent to verify daily HAZCOM, OSHA, RCRA, EPA, SPCC, SPWWW, and company requirements are properly handled and step in as lead when necessary. Work with Management to track and reduce waste generation and costs, track and schedule waste needs, aid in verification of proper waste handling. Work with the Shipping Manger to ensure DOT compliance with labels, packaging requirements and closure instructions. Be lead on the proper verification of Safe Work Practices permitting preparation, usage, and completion for LO/TO, Confined Space, Pipe Opening, Hot Work, and MOC's. Works with all personnel at the facility to make sure all applicable regulations related to the PSM program. Works with EH&S Corporate Manager in training and maintenance with emergency shutdown procedures and procedures to correct or avoid deviation from process parameters. Perform process specific training on PSM related chemicals and processes for any employees that will be working on those processes as well as general PSM training for all employees.
Process Safety & Compliance Maintain and update Process Safety Information (PSI), including: P&ID documentation Pressure relief device calculations Chemical hazard information Conduct and document Process Hazard Analyses (PHAs). Ensure Management of Change (MOC) procedures are properly implemented and completed. Lead verification and documentation of Safe Work Practices permits (LO/TO, Confined Space, Pipe Opening, Hot Work, MOC). Assist in emergency shutdown procedure training and deviation correction protocols. Partner with other managers to perform and document JHAs for various operations.
Minimum Requirements:
Bachelor's degree in chemistry, Chemical or Environmental Engineering, OSHA Safety Management, or related discipline and 2+ years of experience in a related area, or suitable or suitable combination of education and relevant work experience as described. Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge. Demonstrated organization, facilitation, communication and presentation skills. Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction. Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines. Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally. Relevant computer skills for this position include knowledge and experience with Microsoft Office applications, business software SAGE Platinum for Windows. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management. Outstanding interpersonal relationship building and employee coaching and development skills.
Comprehension of the following manufacturing techniques: vacuum distillation, atmospheric controls, chemical addition, filtration methods, control of exothermic reactions, and adjustment of rates of addition within the operating requirements of the equipment being used.
Have a good command and general working knowledge of manufacturing equipment (i.e.
cooling tower fans and circulation pumps, chiller system, steam boilers, air compressors, reactors / mix tanks, and emergency shutdown procedures) - particularly in the equipment ties to compliance. This position requires a proactive approach to problem-solving, strong communication skills, and a commitment to continuous improvement in both safety and operational performance.
Physical Requirements:
While performing the duties of this position the employee is regularly required to sit and talk and hear. The employee is frequently required to use hands to finger, handle or feel and reach with hands and arms.
The employee is frequently required to stand, walk, bend and reach, and may occasionally ride in a motor vehicle.
The employee must frequently lift and/or move up to 50 lbs and occasionally lift and/or move up to 75 lbs. This position may require the employee to handle or ship hazardous materials and hazardous waste in accordance with applicable regulations found in 40 and 49 CFR. Manufacturing plant environment with exposure to chemicals, machinery, and varying temperatures. Requires use of PPE and adherence to safety protocols.
Benefits and Compensation:
The pay range for this role is $80,000 - $90,000.
Please note all pay ranges are broadly stated and any final offer is dependent on factors such as location, direct experience, market guidance, internal equity, among other qualifying criteria permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-12-17 14:11:22
-
Senior Hardware Design Engineer required to work on Intelligent Gate Drive???s for Fast Switching integrated Power Electronics solutions.
You will have experience of Silicone, SiC / Silicone Carbide and Gallium Nitrate / GaN power semiconductor modules for cutting edge motors and drive systems.
Key skills
Gate drive circuit development
Hardware design: schematic and PCB.
Circuit verification and validation, report and review.
Bachelors, PhD???s or other qualification in: Power Electronics, Physics, Electrical or Electronic Engineering.
IC experience: Infineon, NXP, Broadcom, Analog Device etc.
Component level design using datasheets and experienced for selection.
....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £42000 - £58000 Per Annum None
Posted: 2025-12-17 10:27:52
-
A fantastic opportunity has opened for an experienced FPGA Engineer to join a fast-paced, multi-disciplinary engineering team working on innovative cyber and information assurance technologies.
Youll contribute to the design, development, and testing of secure digital solutions used across critical communication and defence environments.
This role offers the chance to work on complex FPGA designs, combining industry-standard and custom interfaces, and to be involved across the full engineering lifecycle, from requirements and architecture through to implementation, verification, and production.
Applicants must have, or be eligible to obtain, UK SC clearance.
What Youll Be Doing As An FPGA Engineer
- Own the FPGA solution from requirements through to development and production
- Lead requirements elicitation and translate them into FPGA implementations
- Define FPGA architecture in collaboration with the wider development team
- Work with the Project Manager to plan, track and deliver against agreed schedules
- Potentially coordinate other FPGA engineers on specific design activities
- Interface with FPGA vendors and third-party IP suppliers
- Develop test benches and perform system-level testing
- Support proposal preparation, estimation activities, and contribute to technical white papers
What Experience Will You Need As An FPGA Engineer
- Proven experience delivering FPGA designs through the full development lifecycle
- Strong VHDL design and verification skills
- Experience optimising designs for performance and power consumption
- Hands-on experience integrating and debugging FPGA solutions in hardware
- Familiarity with configuration management systems
- Experience with Microchip devices and Libero (advantageous)
- Verification experience using ModelSim/QuestaSim (UVM beneficial)
Desirable Experience For The FPGA Engineer
- Requirements management using DOORs
- SmartFusion, IGLOO or PolarFire devices
- PCIe NVMe and FPGA-based implementations
- Xilinx or Altera device/toolchain experience
- Working with third-party IP cores
- Design for security principles
- Embedded firmware (C/C++/assembler)
- Understanding of cryptographic standards and algorithms
- Integration of FPGAs into wider hardware platforms
Why Join
Youll be working with a highly skilled team solving challenging, meaningful engineering problems with real-world impact.
Expect a collaborative culture, complex technical work, and the opportunity to grow your expertise across FPGA, embedded systems and secure digital design.
TT ....Read more...
Type: Permanent Location: Farnborough,England
Start: 17/12/2025
Salary / Rate: Competitive
Posted: 2025-12-17 08:21:04
-
An exciting opportunity has arisen for a Senior Electronics Engineer to join a Cambourne, Cambridgeshire based market-leading manufacturer of specialist fire detection systems.
Their innovative products are trusted globally in high-stakes environments such as museums, warehouses, theatres, and even commercial aviation.
As a Senior Electronics Design Engineer, you will play a pivotal role in leading and mentoring a team of talented engineers.
You'll bring technical expertise, strategic insight, and a passion for delivering exceptional electronic designs that make a tangible difference in the real world.
Key Responsibilities of this Cambourne, Cambridgeshire based Senior Electronics Design Engineer job:
Lead the design and development of complex analogue and digital electronic circuits, including schematic capture, component selection, and design reviews.
Provide hands-on technical leadership throughout the entire electronics product lifecycle — from concept, feasibility, and design, through to prototyping, testing, certification (including ATEX), and production handover.
Ensure robust designs suitable for high-reliability and safety-critical applications, including high-risk and ATEX-certified environments.
Plan, manage, and oversee project delivery, ensuring alignment with technical and commercial objectives.
Skills & Experience Required for this Senior Electronics Design Engineer job:
Proven experience in analogue and digital circuit design, including schematic capture and verification using tools like Altium 365
Strong senior-level background with project ownership, team leadership, and mentoring responsibilities.
Industry experience with regulated or high-risk products ideally including ATEX or other safety-critical standards
Degree-qualified in Electronics, Electrical Engineering, or a closely related discipline
This is a fantastic opportunity to join a forward-thinking Cambourne, Cambridgeshire based business that values innovation, continuous improvement, and the development of its people—all while delivering life-saving technology.
If this could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471 181784. ....Read more...
Type: Permanent Location: Cambourne, England
Start: ASAP
Salary / Rate: £60000 - £70000 per annum
Posted: 2025-12-17 00:00:02
-
Senior RF Microwave Design Engineer
Location: Herefordshire (on-site)
An exciting opportunity has arisen for a Senior RF Microwave Design Engineer to join a specialist UK electronics manufacturer experiencing rapid growth within the aerospace and defence sector.
The company designs and manufactures advanced RF Power Amplifiers and microwave subsystems that support critical Electronic Warfare applications worldwide.
This role is ideal for an experienced RF design engineer with a strong background in high-power microwave amplifier design who thrives in a technically challenging, fast-paced defence environment where quality and precision are paramount.
Main Responsibilities of the Senior RF Microwave Design Engineer (based in Herefordshire):
Design and develop RF microwave amplifiers and subsystems from concept through to production.
Work on high-power amplifier designs producing several hundred watts across the 20MHz to 6GHz frequency range.
Carry out schematic capture, component creation, and simulation using industry-standard RF and PCB design tools.
Design and integrate RF circuits including filters, switches, receivers, and DC control and power supply circuitry.
Perform RF measurements and validation including gain, power, harmonics, intermodulation, and VSWR monitoring.
Use RF and microwave test equipment to support development, verification, and fault finding.
Collaborate closely with multi-disciplinary engineering teams to deliver bespoke RF solutions.
Maintain the company ethos of “Zero defects,” ensuring all products meet stringent defence and quality requirements.
Requirements of the Senior RF Microwave Design Engineer (based in Herefordshire):
Proven RF microwave design experience across 20MHz to 6GHz.
Strong experience in high-power RF amplifier design, including discrete device matching and power limiting.
Expertise in GaN and PIN diode switching, VSWR monitoring, filtering, and PGA/microcontroller implementation.
Experience with FET DC control, sequencing, power management, and DC converters.
Proficiency with RF and electronic design tools such as Altium Designer and Microwave Office.
Programming experience in C and C++ with a good understanding of embedded control.
Hands-on experience using spectrum analysers, signal generators, vector network analysers, and power meters.
Strong understanding of RF measurement techniques and test methodologies.
Must hold a British passport.
Ability to work on-site and collaborate effectively within a design-focused engineering team.
Working Pattern & Benefits:
Full-time, permanent role (Monday to Friday, 8:30am - 5:00pm).
Site-based position in Herefordshire.
Competitive salary dependent on experience.
Opportunity to work on cutting-edge RF and Electronic Warfare technologies.
Join a growing, highly skilled engineering team with long-term career development opportunities.
To apply for this Senior RF Microwave Design Engineer role based in Herefordshire, please send your CV to:kchandarana@redlinegroup.Com or call 01582 878 830 ....Read more...
Type: Permanent Location: Herefordshire, England
Start: ASAP
Salary / Rate: £50000 - £70000 per annum
Posted: 2025-12-16 17:25:49
-
Join a global engineering team driving the green energy transition.
We are seeking a Lead Verification and Validation Engineer to take ownership of HVDC Control and Protection testing and validation activities, ensuring delivery on time and to the highest technical standards.
Key Responsibilities
Lead planning and coordination of Verification and Validation activities.
Develop and execute Factory System Test (FST) cases and support Factory Acceptance Tests (FAT).
Create HVDC system and plant models using PSCAD, RSCAD, or EMTP-RV.
Prepare control system requirements for RTDS lab setups.
Support commissioning teams and contribute to process and tool improvements.
Requirements
Degree in Electrical, Power Systems , Power Electronics Engineering (or equivalent).
Proven experience in HVDC Control and Protection design and verification.
Strong technical skills in PSCAD, RSCAD modelling and system behaviour analysis.
Leadership experience in managing validation teams.
....Read more...
Type: Permanent Location: Stafford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £48000 - £55000 Per Annum None
Posted: 2025-12-16 16:43:15
-
Senior Mechanical Design Engineer
Location: Lincoln, Lincolnshire, UK
An excellent opportunity for an experienced Senior Mechanical Design Engineer to join a global RF technology group as part of a specialist R&D team in the UK.
This role focuses on designing and developing advanced mechanical solutions for RF, antenna, and electronic systems used across aerospace, defence, naval, space, and medical applications.
This position is ideal for a highly motivated and innovative engineer with extensive experience in mechanical design for demanding environments, who thrives on solving complex technical challenges and working collaboratively with multidisciplinary teams across international sites.
Main Responsibilities of the Senior Mechanical Design Engineer based in Lincoln, UK:
Lead and contribute to the mechanical design of RF, antenna, and system products from concept through CAD, prototyping, fabrication, and final assembly.
Collaborate closely with RF and electronics engineers to optimise designs for challenging applications and integrate systems effectively.
Produce detailed CAD models, drawings, and analysis for strength, vibration, thermal behaviour, environmental performance, and compliance with military standards (e.G., MIL-STD-810).
Support proposal generation with concept CAD, analysis, and presales input.
Develop and optimise prototypes, models, fixtures, and specialised test equipment.
Oversee environmental and mechanical testing, verification, and product qualification.
Work directly with suppliers and manufacturing partners to ensure high-quality fabrication and testing.
Industrialise designs and manage handover to production, including documentation, training, and assembly instructions.
Produce technical reports, customer-facing documentation, and participate in design reviews with customers.
Requirements of the Senior Mechanical Design Engineer based in Lincoln, UK:
Bachelor's degree in Mechanical Engineering (Master's preferred).
Extensive experience in mechanical product design, ideally within defence, aerospace, naval, or space applications.
Proven ability to deliver designs from concept to CAD, fabrication, and final assembly.
Experience in design for environmental requirements including vibration, shock, humidity, and ingress protection.
Strong expertise in environmental qualification, product testing, and verification.
Mastery of CAD tools (e.G., Solidworks, Autodesk Inventor).
Knowledge of composites, structures, aerospace, robotics, or electromechanical systems.
Practical experience in prototyping, machining, and assembly.
Experience working with suppliers, machinists, and toolmakers.
Proven track record of working directly with customers in a consultative and collaborative manner.
Excellent problem-solving skills, resilience, and attention to detail.
Desirable Experience:
Shipborne, maritime, or space-related equipment.
Thermal, ingress, corrosion, and EMC considerations in enclosure design.
Mechanical design of healthcare-related products.
Experience with FEA tools and MATLAB.
To apply for this Senior Mechanical Design Engineer role based in Lincoln, UK, please send your CV to: kchandarana@redlinegroup.Com or call 01582 878 830 / 07961 158 784 ....Read more...
Type: Permanent Location: Lincolnshire, England
Start: ASAP
Salary / Rate: £75000 - £90000 per annum
Posted: 2025-12-16 15:35:40
-
We are seeking an experienced Temporary Works Structural Engineer to provide specialist engineering expertise across cladding remediation and construction projects.
This is a permanent, full-time role offering a mix of office, remote, and site-based work, with travel required across Greater London and surrounding areas.Location: Greater London and surrounding areas (travel required) Working Arrangement: Full-time, hybrid Salary: £50,000 - £65,000 per annumKey Responsibilities:
Lead the verification and approval of temporary works designs across multiple projects
Carry out detailed wind loading calculations in line with current Eurocodes
Review scaffold loads, hoarding designs, welfare structures, and temporary access systems
Assess structural impacts of temporary works on existing buildings, podium decks, and substructures
Calculate load distribution solutions including spreaders, base plates, and transfer mechanisms
Produce clear, auditable calculation packs suitable for Building Control and BSR submission
Generate and review TG20:21 compliance sheets using industry-standard software
Ensure all works comply with BS 5975:2019, PAS 8812:2016, CDM 2015, and relevant British Standards
Maintain comprehensive technical documentation and digital records to support the Golden Thread
Provide technical site support during installation, inspection, and removal of temporary works
Attend design, project, and client meetings as the temporary works lead
Support continuous improvement within the design function, including mentoring junior engineers
Contribute to performance management, knowledge sharing, and best practice development
Candidate Requirements:
BEng or MEng in Civil or Structural Engineering
Chartered Engineer (CEng) with ICE or IStructE
MSc in Temporary Works and Construction Method Engineering
CITB Temporary Works Coordinator certification
Black CSCS card (Professional level)
Strong working knowledge of BS 5975 and PAS 8812
Excellent understanding of CDM 2015 designer duties and risk management
Proven experience in wind loading calculations for complex building geometries
Proficient in structural analysis software such as STAAD.Pro, SAP2000, or Robot
Confident communicator able to liaise with clients, consultants, and internal teams
Interested applicants are invited to apply by sending their most up-to-date CV. ....Read more...
Type: Permanent Location: City of London, England
Start: ASAP
Salary / Rate: £50000.00 - £65000.00 per annum
Posted: 2025-12-15 15:39:51
-
Warehouse Stock Assistant Coolock, Clonshaugh - Dublin €16,786 per annum Part-time, permanent
A great opportunity for someone looking for a stable, hands-on role within a busy distribution centre, working as part of a supportive and organised team.
This is a permanent position based at our customer's distribution centre in Coolock, Clonshaugh, working in a mixed environment.
Pay and hours
€16,786 per year
20 hours per week plus a 30-minute unpaid break
5 days out of 7
8-hour shifts between 06:00-14:00 and 14:00-00:00
The role As a Warehouse Stock Assistant, you will help ensure stock entering and leaving the depot is accurate, working in a fast-paced, target-driven environment.
Key duties include:
Auditing inbound supplier deliveries using the GFR programme
Checking picker accuracy for stock going to stores and investigating errors
Supporting load adherence and stock accuracy checks
Following audit and error verification procedures at all times
Working to daily productivity targets
About you
Good written and verbal communication skills
Able to respond to verbal instructions and audible warning devices
Basic knowledge of Microsoft Excel and Word
Comfortable with manual handling and varied warehouse tasks
Reliable and detail focused
What's on offer
Competitive salary with optional pension scheme
Regular overtime available
Free onsite parking
Full training provided
Recognition awards, incentives and refer a friend bonus
Genuine opportunities for progression
A steady role with clear structure and long-term prospects. Apply now with C2 Recruitment to find out more.
By applying for this role, you are consenting for C2 Recruitment to hold and process your data in compliance with the General Data Protection Regulations.
To view other great vacancies at C2 Recruitment, please visit our website or call us for a confidential chat about upcoming opportunities in:
Buying & Merchandising and Ecommerce | Charity & Non Profit | Design, Technical, Wholesale & Production | Finance | HR & Talent | H&S & Compliance | Hospitality, Catering & Leisure | Marketing, Digital & Technology | Office & Administration | Property & Centre Management | Retail, Trade and Luxury Operations | Senior Appointments & Executive | Sales & FMCG | Supply Chain & Logistics & Warehouse | Manufacturing & Engineering
....Read more...
Type: Permanent Location: Coolock, Dublin, Republic of Ireland
Start: ASAP
Salary / Rate: Up to €16786 per annum
Posted: 2025-12-15 12:51:25
-
The Test Engineer will join a Systems Engineering team critical in space thruster engine development.
You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components.
This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop.
Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc.
Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 Per Annum None
Posted: 2025-12-15 10:57:45
-
Senior Power Electronics Engineer - DCDC/ACDC Converters
Are you looking to work for a global leading engineering business? Are you looking to develop and progress your career in Power Electronics Engineering?
If so, then our client has the job for you.
This business is a global leader in the design & development of power supply products for customers within industries such as computing, communications, industrial and medical markets.
They are currently recruiting for a Power Electronics Engineer to join their expanding R&D Electronics team in Hampshire.
As a Senior Power Electronics Engineer - DCDC/ACDC Converters, you will:
Design 1-30W isolated DC-DC converters and AC-DC converters.
Lead development projects from kick-off through to manufacturing introduction.
Assist in creating design specifications.
Take an active role in performing verification and validation tests.
To apply for this Senior Power Electronics Engineer - DCDC/ACDC Converters job, you will need a combination of the following:
A formal qualification equivalent to a UK degree level in Electronics, Microelectronics, Physics, or a related discipline.
5 years' experience of electronics design, preferably power conversion.
A sound theoretical understanding of analogue electronics and magnetics, including transformer design.
Knowledge of modern power conversion design techniques applicable to DC-DC and AC-DC converters from 1W to 100W.
Experience in transformer design, ideally with knowledge of planar magnetics.
This is an exciting job opportunity for an engineer to progress their career with a financially strong progressive mid-sized electronics company in Hampshire that is part of a global group.
To apply for this fantastic Senior Power Electronics Engineer - DCDC/ACDC Converters job based in Hampshire, please email NDrain@redlinegroup.Com or call Nick Drain on 01582 878828/07961158786 ....Read more...
Type: Permanent Location: Bordon, England
Start: ASAP
Salary / Rate: £50000 - £55000 per annum
Posted: 2025-12-13 00:00:04
-
Senior Test Development Engineer
Location: Livingston, Scotland
This is a senior engineering role with excellent career progression opportunities within a leading electronics manufacturing environment.
Key Responsibilities of this Senior Test Development Engineer, Livingston job are:
Test Solution Design & Development - Design, develop, and verify test solutions for electronic products, ensuring robust and efficient testing processes.
High-Level Assembly Testing - Create and implement test systems to evaluate the performance and signal output of electronic boards using advanced instrumentation.
Signal Analysis - Identify and analyse signal types and characteristics to ensure accurate test coverage and reliable performance validation.
Hardware & Mechanical Development - Support the development of basic electronic boards and assist with the design and assembly of mechanical enclosures.
Software & Automation Tools - Utilise LabVIEW and TestStand to develop, debug, and verify automated test sequences and scripts.
Instrumentation & Measurement - Integrate instrumentation for measurement, calibration, and validation of electronic devices under test.
Documentation - Produce clear and comprehensive test specifications and related engineering documentation.
Key Requirements of this Senior Test Development Engineer job, Livingston are:
Proven experience in electronics test development, including the design and implementation of automated test systems.
Strong hands-on knowledge of electronic circuits, components, and board-level schematics.
Practical experience using LabVIEW and TestStand for test sequence development, debugging, and verification.
Solid background in electronics design or product development, with the ability to understand and influence design for testability.
Excellent analytical and problem-solving skills, with a methodical and detail-oriented engineering approach.
Must be a British national (due to project security requirements).
To apply for this Senior Test Development Engineer - Electronics Manufacturing role in Livingston, Scotland, please send your CV to NDrain@redlinegroup.Com Or call 07961 158786. ....Read more...
Type: Permanent Location: Scotland
Start: ASAP
Salary / Rate: £45000 - £80000 per annum
Posted: 2025-12-13 00:00:04
-
An exciting opportunity has arisen to join a market-leading group operating across the Commercial, Industrial, Residential and Service sectors, who are now looking for an Electrical Design Engineer to support the delivery of innovative engineering solutions across their expanding product portfolio.
This Gloucestershire based, dynamic organisation has become the market leader in each of the sectors it serves and is embarking on an ambitious growth plan over the next 3 years.
With continued investment in products, infrastructure and most importantly, its people, this is a fantastic opportunity to join a forward-thinking engineering function that prides itself on being entrepreneurial, customer-focused, competitive and operationally best-in-class.
As an Electrical Design Engineer here, you will take responsibility for electrical design activities across the product lifecycle, from early-stage concepts all the way through to production release.
This will include control panel design, PLC integration and ensuring that all electrical systems meet stringent safety, quality and compliance requirements.
This is a crucial role in delivering robust and manufacturable engineering solutions working as part of a multi-disciplinary team.
Key responsibilities for the role of Electrical Design Engineer based in Gloucestershire:
Leading the electrical design of packaged pumping systems, including control panel layouts, schematic diagrams and cable schedules.
Researching and developing new product concepts while enhancing existing designs in response to customer, production and market feedback.
Specifying and selecting electrical components to meet performance, safety and compliance requirements.
Development and integration of PLC-based control systems including configuration, I/O definition and functional documentation (PLC programming experience would be useful but is not essential).
Producing and maintaining detailed electrical documentation including wiring diagrams, design calculations and BOMs.
Ensuring that all electrical designs comply with CE/UKCA requirements, Health & Safety regulations and relevant UK/EU directives (LVD, EMC, Machinery Directive).
Supporting EMC compliance through best-practice design and collaboration with external test facilities.
Collaborating with Mechanical Design, Compliance and Manufacturing teams to ensure design integrity and manufacturability.
Providing input into design reviews, risk assessments and verification/validation testing throughout the development lifecycle.
Key skills required for Gloucestershire based role of Electrical Design Engineer:
Degree or equivalent in Electrical or Electronic Engineering.
Proven experience in product design or development, (specific experience involving water management / fluid-handling equipment would be ideal but is not a pre-requisite).
Experience of working within R&D or New Product Development environments.
Proven experience of designing industrial/commercial control panels (a working knowledge of PLC-based control systems and Variable Speed Drives would be an advantage but is not a pre-requisite)
Solid experience in using CAD/schematic design software, experience of SolidWorks Electrical would be ideal but experience of EPLAN, or AutoCAD Electrical will also be considered.
Familiarity with key standards and directives, including:
- Low Voltage Directive (LVD)
- EMC Directive
- Machinery Directive
- BS EN 60204-1 (Electrical Equipment of Machines)
- EN 60335
Working environment and opportunities:
Hybrid working arrangements with time split between the Gloucestershire based office, home and site
Opportunity to join a highly skilled, ambitious engineering team within a rapidly expanding market leader
Involvement in the full product lifecycle, contributing to innovative and technically challenging projects.
A culture that encourages development, continuous improvement and professional growth.
This is a great opportunity to join a forward-thinking engineering group with ambitious growth plans, a collaborative culture and a commitment to building the best place to work while helping shape the future of high-performance, compliant engineering solutions.
To apply please send your CV to clam@redlinegroup.Com, or for more information contact Chuck Lam on 01582 878868. ....Read more...
Type: Permanent Location: Gloucestershire, England
Start: ASAP
Salary / Rate: £55000 - £65000 per annum
Posted: 2025-12-12 14:35:44
-
Test technician with good all round precision engineering mechanical, electronic and simulation test validation and verification experience required to join a comprehensive in house test facility.
Component, product, mechanical and electronic / electrical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Role requirements
Electrical and/or mechanical apprenticeship ideally with ONC/HNC or other engineering qualifications.
Mechanical fitting or electrical experience.
Supporting design and development design teams with mechanical and electrical test fixtures.
Diagnosis and fault finding.
Mechanical assembly / electrical systems.
Understanding of engineering drawings, schematics and flow charts.
An eye of irregularities in data (e.g.
over temperatures, over pressures). ....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £44000 Per Annum None
Posted: 2025-12-12 09:37:38
-
Electronic Instrument Test technician with good all round precision engineering electronic data acquisition, test validation and verification experience required to join a comprehensive in house test facility.
Component and product, instrumentation, electronic / electrical testing experience ideally in a very practical precision design environment.
Key skills
Data acquisition system build and administration to experiment, collect data and calculate results.
Set up, configure data acquisitions system software, example NI DAQ, NI LabVIEW, DASYLab.
Instrumentation use including:
Pressure sensors
Accelerometers
Flow meters
Loadcells
Thermocouples.
Cable layout and installation route cabling
Soldering skills at connector and PCB level
Digital multi meter (DMM) and oscilloscope knowledge.
Environmental testing.
Inverters, 3 phase motors and programmable Logic controller knowledge.
....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £42000 Per Annum None
Posted: 2025-12-12 09:36:36
-
Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility.
Component, product, mechanical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with
Mechanical fitting skills practical ability with hand and power tools.
Mobile hydraulics.
Pneumatics
Pressure systems
Pressure equipment (e.g.
Accumulators/pulsation dampener)
Pressure safety equipment, e.g.
Pressure Relief Valves.
Fluid Power systems ??? Pumps, Piping, Valves.
Plant maintenance activities, installation or fault finding and repairs of equipment and services.
3D CAD
....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £45000 Per Annum None
Posted: 2025-12-12 09:36:34
