-
Northampton Part Time Permanent Position- £23,907 per Annum
At RAS Supply Chain Integrity, we protect stock accuracy for major Retailers across their supply chains.
From inbound deliveries to outbound dispatch or store back-door, we make sure stock counts are correct, errors are caught early, and retailers can trust what reaches their shelves.
We are looking for a Warehouse Stock Auditors to join our site-based team and carry out daily physical stock checks.
The Role
This is a hands-on auditing position based at our customer's distribution centre.
Your job is to physically check stock for accuracy, identify discrepancies, and document results clearly.
You'll play a key role in ensuring that pallets, cages, and loads match paperwork and delivery requirements before leaving the depot.
If you're naturally precise, enjoy structured work, and take pride in getting it right first time, this role is for you.
What you'll be doing
Conducting physical audits of pallets, cages, and trailer loads
Checking outbound loads against driver paperwork and delivery requests
Verifying the accuracy of inbound deliveries and reporting discrepancies
Recording audit outcomes clearly and accurately
Escalating stock errors or mismatches quickly and professionally
Working to daily targets and quality standards
Supporting continuous improvement by spotting recurring issues
Following site safety procedures and working efficiently in a mixed environment
What We're Looking For
You don't need to be a manager.
You need to be accurate, consistent, and reliable.
You'll need
Experience in a warehouse environment (stock control, checking, audit, picking, dispatch, or similar)
Strong attention to detail and confidence with basic calculations
Ability to work to targets while maintaining high standards
Clear communication skills, both written and verbal
Basic Microsoft Excel and Word knowledge
Ability to follow instructions and stay focused in a fast-paced environment
Must be aged 18+
Hours and Shift Pattern
37.5 hours per week (plus daily 30-minute unpaid break)
5 days out of 7
8-hour shifts between:
06:00-14:00
13:00-21:00
Working both weekend days and 3 shifts during the week, on a weekly rotational basis
Working environment: Mixed
Why Join RAS Supply Chain Integrity?
This isn't just warehouse work.
It's supply chain accuracy at scale.
RAS Supply Chain Integrity is the globe's only end-to-end stock audit provider, trusted by some of the world's largest retailers to protect stock accuracy from distribution centre to store.
When you join us, you're part of a leading organisation that:
Works directly with major retail supply chains
Protects service levels, availability, and customer confidence
Uses data-driven audits to improve performance, not just report problems
If you want to work for a business setting the standard for stock accuracy, we want to hear from you.
About the Position
Full-time, permanent role
Site-based at our customer's distribution centre
Full training provided
Salary: £ 23,907 per Annum
Access to Stream.co (formerly Wagestream), enabling draw down of your wage, when you need it
Flexible working shifts patterns - just ask!
Competitive salary with optional pension scheme
Regular overtime is available
Free onsite parking & subsidised canteen
Recognition Awards and Incentives
Genuine career progression
Refer a friend bonus
This role is being managed by RAS Supply Chain Integrity.
For a confidential chat about this vacancy or other opportunities, call 01689 879444 or 07769280962.
By applying, you consent to us holding and processing your data in line with UK GDPR.
To access, correct, erase, or restrict use of your data, contact jobsatsupplychainintegrity.careers@supplychainintegrity.eu. ....Read more...
Type: Permanent Location: Northampton, England
Salary / Rate: Up to £23907 per annum
Posted: 2026-03-30 15:23:23
-
Warehouse Stock Auditor (RAS-SCI)
Haydock- St Helens, Full Time Permanent Position- £23,907per annum
At RAS Supply Chain Integrity, we protect stock accuracy for major Retailers across their supply chains.
From inbound deliveries to outbound dispatch or store back-door, we make sure stock counts are correct, errors are caught early, and retailers can trust what reaches their shelves.
We are looking for a Warehouse Stock Auditors to join our site-based team and carry out daily physical stock checks.
The Role
This is a hands-on auditing position based at our customer's distribution centre.
Your job is to physically check stock for accuracy, identify discrepancies, and document results clearly.
You'll play a key role in ensuring that pallets, cages, and loads match paperwork and delivery requirements before leaving the depot.
If you're naturally precise, enjoy structured work, and take pride in getting it right first time, this role is for you.
What you'll be doing
Conducting physical audits of pallets, cages, and trailer loads
Checking outbound loads against driver paperwork and delivery requests
Verifying the accuracy of inbound deliveries and reporting discrepancies
Recording audit outcomes clearly and accurately
Escalating stock errors or mismatches quickly and professionally
Working to daily targets and quality standards
Supporting continuous improvement by spotting recurring issues
Following site safety procedures and working efficiently in a mixed environment
What We're Looking For
You don't need to be a manager.
You need to be accurate, consistent, and reliable.
You'll need
Experience in a warehouse environment (stock control, checking, audit, picking, dispatch, or similar)
Strong attention to detail and confidence with basic calculations
Ability to work to targets while maintaining high standards
Clear communication skills, both written and verbal
Basic Microsoft Excel and Word knowledge
Ability to follow instructions and stay focused in a fast-paced environment
Must be aged 18+
Hours and Shift Pattern
37.5 hours per week (plus daily 30-minute unpaid break)
5 days out of 7
8-hour shifts between:
04:00-12:00
05:00-13:00
Working environment: Mixed
Why Join RAS Supply Chain Integrity?
This isn't just warehouse work.
It's supply chain accuracy at scale.
RAS Supply Chain Integrity is the globe's only end-to-end stock audit provider, trusted by some of the world's largest retailers to protect stock accuracy from distribution centre to store.
When you join us, you're part of a leading organisation that:
Works directly with major retail supply chains
Protects service levels, availability, and customer confidence
Uses data-driven audits to improve performance, not just report problems
If you want to work for a business setting the standard for stock accuracy, we want to hear from you.
About the Position
Full-time, permanent role
Site-based at our customer's distribution centre
Full training provided
Salary: £ 23,907 per annum
Access to Stream.co (formerly Wagestream), enabling draw down of your wage, when you need it
Flexible working shifts patterns - just ask!
Competitive salary with optional pension scheme
Regular overtime is available
Free onsite parking & subsidised canteen
Recognition Awards and Incentives
Genuine career progression
Refer a friend bonus
This role is being managed by RAS Supply Chain Integrity.
For a confidential chat about this vacancy or other opportunities, call 01689 879444 or 07769280962.
By applying, you consent to us holding and processing your data in line with UK GDPR.
To access, correct, erase, or restrict use of your data, contact jobsatsupplychainintegrity.careers@supplychainintegrity.eu. ....Read more...
Type: Permanent Location: Haydock, England
Salary / Rate: Up to £23907 per annum
Posted: 2026-03-30 15:12:37
-
Warehouse Stock Auditor (RAS-SCI)
Aylesford Full Time Permanent Position- £24,453 per annum
At RAS Supply Chain Integrity, we protect stock accuracy for major Retailers across their supply chains.
From inbound deliveries to outbound dispatch or store back-door, we make sure stock counts are correct, errors are caught early, and retailers can trust what reaches their shelves.
We are looking for a Warehouse Stock Auditors to join our site-based team and carry out daily physical stock checks.
The Role
This is a hands-on auditing position based at our customer's distribution centre.
Your job is to physically check stock for accuracy, identify discrepancies, and document results clearly.
You'll play a key role in ensuring that pallets, cages, and loads match paperwork and delivery requirements before leaving the depot.
If you're naturally precise, enjoy structured work, and take pride in getting it right first time, this role is for you.
What you'll be doing
Conducting physical audits of pallets, cages, and trailer loads
Checking outbound loads against driver paperwork and delivery requests
Verifying the accuracy of inbound deliveries and reporting discrepancies
Recording audit outcomes clearly and accurately
Escalating stock errors or mismatches quickly and professionally
Working to daily targets and quality standards
Supporting continuous improvement by spotting recurring issues
Following site safety procedures and working efficiently in a mixed environment
What We're Looking For
You don't need to be a manager.
You need to be accurate, consistent, and reliable.
You'll need
Experience in a warehouse environment (stock control, checking, audit, picking, dispatch, or similar)
Strong attention to detail and confidence with basic calculations
Ability to work to targets while maintaining high standards
Clear communication skills, both written and verbal
Basic Microsoft Excel and Word knowledge
Ability to follow instructions and stay focused in a fast-paced environment
Must be aged 18+
Hours and Shift Pattern
37.5 hours per week (plus daily 30-minute unpaid break)
5 days out of 7
8-hour shifts between:
14:00-22:00
Working environment: Mixed
Why Join RAS Supply Chain Integrity?
This isn't just warehouse work.
It's supply chain accuracy at scale.
RAS Supply Chain Integrity is the globe's only end-to-end stock audit provider, trusted by some of the world's largest retailers to protect stock accuracy from distribution centre to store.
When you join us, you're part of a leading organisation that:
Works directly with major retail supply chains
Protects service levels, availability, and customer confidence
Uses data-driven audits to improve performance, not just report problems
If you want to work for a business setting the standard for stock accuracy, we want to hear from you.
About the Position
Full-time, permanent role
Site-based at our customer's distribution centre
Full training provided
Salary: £ 24,453 per annum
Access to Stream.co (formerly Wagestream), enabling draw down of your wage, when you need it
Flexible working shifts patterns - just ask!
Competitive salary with optional pension scheme
Regular overtime is available
Free onsite parking & subsidised canteen
Recognition Awards and Incentives
Genuine career progression
Refer a friend bonus
This role is being managed by RAS Supply Chain Integrity.
For a confidential chat about this vacancy or other opportunities, call 01689 879444 or 07769280962.
By applying, you consent to us holding and processing your data in line with UK GDPR.
To access, correct, erase, or restrict use of your data, contact jobsatsupplychainintegrity.careers@supplychainintegrity.eu. ....Read more...
Type: Permanent Location: Aylesford, England
Salary / Rate: Up to £24453 per annum
Posted: 2026-03-30 15:00:10
-
JOB DESCRIPTION
Tasks PROFILE:
Typical tasks for this position include (but are not limited to) the following:
Prepare batch cards and all production paperwork.
Release pick lists for pigment hoppers and chemical raw materials.
Sequence batches through production; optimize use of labor, equipment, set ups, and materials.
Compare scheduled production order totals to the master schedule.
Identify and resolve conflicts for capacity of production equipment and labor.
Communicate daily and weekly schedule, progress toward each, and all changes to plant and corporate personnel daily.
Prepare reports on capacity, utilization, load, and schedules.
Act on requested schedule changes including customer expedites.
Bring together on a regular basis Research & Development, Quality Control, Process Engineering, and Production departments to review first time production and critical changes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-time
Schedule: Monday - Friday 8:00AM-4:30PM
Salary: $70,000 - $90,000
Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-30 14:11:06
-
JOB DESCRIPTION
Tasks PROFILE:
Typical tasks for this position include (but are not limited to) the following:
Prepare batch cards and all production paperwork.
Release pick lists for pigment hoppers and chemical raw materials.
Sequence batches through production; optimize use of labor, equipment, set ups, and materials.
Compare scheduled production order totals to the master schedule.
Identify and resolve conflicts for capacity of production equipment and labor.
Communicate daily and weekly schedule, progress toward each, and all changes to plant and corporate personnel daily.
Prepare reports on capacity, utilization, load, and schedules.
Act on requested schedule changes including customer expedites.
Bring together on a regular basis Research & Development, Quality Control, Process Engineering, and Production departments to review first time production and critical changes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-time
Schedule: Monday - Friday 8:00AM-4:30PM
Salary: $70,000 - $90,000
Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-30 14:09:00
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using machinery.
Weigh or measure chemicals, coatings, or paints before adding them to machines.
Select appropriate coatings, paints, or sprays, or prepare them by mixing substances according to formulas, using automated paint-mixing equipment.
Set up and operate machines to paint or coat products with such materials as silver and copper solution, rubber, paint, glaze, oil, or rustproofing materials.
Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
Start and stop operation of machines, using levers or buttons.
Record operational data on specified forms.
Start pumps to mix solutions and fill tanks.
Operate auxiliary machines or equipment used in coating or painting processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.Skills
Operation and Control - Controlling operations of equipment or systems.
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
WORK ACTIVITIES
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-time
Shift: Monday - Thursday 4:00PM - 2:30AM: Friday: Potential mandatory overtime every other Friday.
Pay: $24/hour with a second shift premium of $0.75
Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-29 22:09:11
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using machinery.
Weigh or measure chemicals, coatings, or paints before adding them to machines.
Select appropriate coatings, paints, or sprays, or prepare them by mixing substances according to formulas, using automated paint-mixing equipment.
Set up and operate machines to paint or coat products with such materials as silver and copper solution, rubber, paint, glaze, oil, or rustproofing materials.
Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
Start and stop operation of machines, using levers or buttons.
Record operational data on specified forms.
Start pumps to mix solutions and fill tanks.
Operate auxiliary machines or equipment used in coating or painting processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.Skills
Operation and Control - Controlling operations of equipment or systems.
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
WORK ACTIVITIES
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-time
Shift: Monday - Thursday 4:00PM - 2:30AM: Friday: Potential mandatory overtime every other Friday.
Pay: $24/hour with a second shift premium of $0.75
Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-29 22:08:51
-
JOB DESCRIPTION
TASKS PROFILE:
Typical tasks for this position include (but are not limited to) the following:
Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
Troubleshoot problems with chemical manufacturing processes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
Conduct research to develop new and improved chemical manufacturing processes.
Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
Design and plan layout of equipment.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Effectively communicate with supervisors, peers, or subordinates, in written form or in person.
Perform tasks assigned using specific operating procedures, and following department specific quality control processed and procedures.
Work with production to start up, enhance and improve all processes related to production and assist with defining SOPs.
Responsibilities/Expectations:
Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
Qualifications:
Bachelor's Degree in Chemical Engineering plus 5 years of related experience (or Associate's Degree in Chemical Engineering plus 10 years of related experience).
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills:
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making.
Technology Design - Generating or adapting equipment and technology to serve production needs.
Writing - Communicating effectively in writing as appropriate for the needs of the audience.
Job Type: Full-time
Schedule: Monday - Friday, days
Salary: $80,000 - $125,000
BENEFITS:
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-29 14:09:32
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using machinery.
Weigh or measure chemicals, coatings, or paints before adding them to machines.
Select appropriate coatings, paints, or sprays, or prepare them by mixing substances according to formulas, using automated paint-mixing equipment.
Set up and operate machines to paint or coat products with such materials as silver and copper solution, rubber, paint, glaze, oil, or rustproofing materials.
Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
Start and stop operation of machines, using levers or buttons.
Record operational data on specified forms.
Start pumps to mix solutions and fill tanks.
Operate auxiliary machines or equipment used in coating or painting processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation and Control - Controlling operations of equipment or systems.
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
WORK ACTIVITIES
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Job Type: Full-time
Shift: Monday - Thursday 5:45AM - 4:15PM Friday: Potential mandatory overtime every other Friday.
Pay: $24/hour
Work Location: In person
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-29 14:09:32
-
JOB DESCRIPTION
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Short-term objectives:
Assume transactional responsibility for ERP purchasing transactions. Keep inventory at sufficient levels for items to fulfill requirements of production, and maintaining delivery of customer orders. Produce and review reports for purchasing, production planning, and inventory control. Work with and through others to obtain the best price, quality, delivery and service possible. Create an innovative approach for the reduction and consolidation of packaging materials.
Long term objectives:
Be responsible for the integrity of all transactions between our outside vendors and our company. Work with inventory planners to keep inventory levels at the optimum fill rate for our customers. Work with all departments to design/develop packaging which is optimized to benefit the WFG, and its customers. Improve transaction accuracy with our vendors to 100%.
Develop a packaging improvement plan covering largest opportunities, and benefits to the end use customers.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Minimum Requirements: High School Diploma or equivalent 1-2 years purchasing experience Experience and knowledge of purchasing system with an integrated ERP system, Microsoft D365 preferred Experience and knowledge of Microsoft products (Excel preferred) Strong organizational, communication and negotiation skills
Desired requirements: Four year business degree Experience operating in an ERP system operating environment Experience in a lean (flow) manufacturing environment Experience in marine coatings preferred Experience in commodity purchases preferred
Reasoning Ability
Responsibility for following standards set and regarded as acceptable in a normal purchasing department environment, including proper presentation of the department and company to vendors and internal sources.
CERTIFICATES, LICENSES, REGISTRATIONS
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
No extraordinary physical demands will be required.
The individual will be sitting at a desk for extended periods of time.
The individual may do some walking through facility and occasional light lifting (up to approximately 20 pounds).
WORK ENVIRONMENT: Normal office environment.
KEY PERFORMANCE INDICATORS (KPI)
Cost savings - measured, and tracked Prevention of "Out of Stocks" - measured, and tracked Inventory dollars on hand for purchased category - measured, and tracked Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-29 14:09:31
-
JOB DESCRIPTION
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Short-term objectives:
Assume transactional responsibility for ERP purchasing transactions. Keep inventory at sufficient levels for items to fulfill requirements of production, and maintaining delivery of customer orders. Produce and review reports for purchasing, production planning, and inventory control. Work with and through others to obtain the best price, quality, delivery and service possible. Create an innovative approach for the reduction and consolidation of packaging materials.
Long term objectives:
Be responsible for the integrity of all transactions between our outside vendors and our company. Work with inventory planners to keep inventory levels at the optimum fill rate for our customers. Work with all departments to design/develop packaging which is optimized to benefit the WFG, and its customers. Improve transaction accuracy with our vendors to 100%.
Develop a packaging improvement plan covering largest opportunities, and benefits to the end use customers.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Minimum Requirements: High School Diploma or equivalent 1-2 years purchasing experience Experience and knowledge of purchasing system with an integrated ERP system, Microsoft D365 preferred Experience and knowledge of Microsoft products (Excel preferred) Strong organizational, communication and negotiation skills
Desired requirements: Four year business degree Experience operating in an ERP system operating environment Experience in a lean (flow) manufacturing environment Experience in marine coatings preferred Experience in commodity purchases preferred
Reasoning Ability
Responsibility for following standards set and regarded as acceptable in a normal purchasing department environment, including proper presentation of the department and company to vendors and internal sources.
CERTIFICATES, LICENSES, REGISTRATIONS
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
No extraordinary physical demands will be required.
The individual will be sitting at a desk for extended periods of time.
The individual may do some walking through facility and occasional light lifting (up to approximately 20 pounds).
WORK ENVIRONMENT: Normal office environment.
KEY PERFORMANCE INDICATORS (KPI)
Cost savings - measured, and tracked Prevention of "Out of Stocks" - measured, and tracked Inventory dollars on hand for purchased category - measured, and tracked Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-29 14:09:26
-
JOB DESCRIPTION
TASKS PROFILE:
Typical tasks for this position include (but are not limited to) the following:
Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
Troubleshoot problems with chemical manufacturing processes.
Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
Conduct research to develop new and improved chemical manufacturing processes.
Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
Design and plan layout of equipment.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Effectively communicate with supervisors, peers, or subordinates, in written form or in person.
Perform tasks assigned using specific operating procedures, and following department specific quality control processed and procedures.
Work with production to start up, enhance and improve all processes related to production and assist with defining SOPs.
Responsibilities/Expectations:
Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
Qualifications:
Bachelor's Degree in Chemical Engineering plus 5 years of related experience (or Associate's Degree in Chemical Engineering plus 10 years of related experience).
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills:
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making.
Technology Design - Generating or adapting equipment and technology to serve production needs.
Writing - Communicating effectively in writing as appropriate for the needs of the audience.
Job Type: Full-time
Schedule: Monday - Friday, days
Salary: $80,000 - $125,000
BENEFITS:
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-29 14:09:05
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using machinery.
Weigh or measure chemicals, coatings, or paints before adding them to machines.
Select appropriate coatings, paints, or sprays, or prepare them by mixing substances according to formulas, using automated paint-mixing equipment.
Set up and operate machines to paint or coat products with such materials as silver and copper solution, rubber, paint, glaze, oil, or rustproofing materials.
Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
Start and stop operation of machines, using levers or buttons.
Record operational data on specified forms.
Start pumps to mix solutions and fill tanks.
Operate auxiliary machines or equipment used in coating or painting processes.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation and Control - Controlling operations of equipment or systems.
Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Troubleshooting - Determining causes of operating errors and deciding what to do about it.
Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
WORK ACTIVITIES
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Job Type: Full-time
Shift: Monday - Thursday 5:45AM - 4:15PM Friday: Potential mandatory overtime every other Friday.
Pay: $24/hour
Work Location: In person
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-29 14:09:04
-
Warehouse Manufacturing Materials Handler required to assist warehouse electronic resource materials and component movements.
What you will be doing
Responsible for material movements and accurate stock controls.
Warehouse house keeping
Develop and implement processes to ensure accurate stock recording.
Monitor demands from engineers.
Load and Unload Trucks
Develop extensive relationships between different stakeholders.
Interface with stakeholders throughout Europe.
Involvement in HSE protocols.
Administrative tasks for shipments and stock controls ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £24000 - £28000 Per Annum None
Posted: 2026-03-29 11:35:53
-
Machine Operative - up to £16ph - Shift work - Temp to Perm contract
Are you looking for your next role within a production environment, flexible to work day and night shifts, and available to work alternating shift patterns including weekends? This Machine Setter role will consist of the following:
As a Machine Operative your duties will include:
- Carry out tool and insert changes correctly, working to strict deadlines
- Esnure machinery is running smoothly and set to standard cycle speeds with minimal material wastage
- Taking apart machines and cleaning to ensure smooth production and efficiency
- Set and operate machines to correct specifications based on material production
- Comply with strict health and safety procedures
- Ensure each different materials are appropriately seperated avoiding cross contamination
For the Machine Operative role we are looking for someone who has:
- Previous Machine Setter experience
- Flexible to work alternating shift patterns including weekends and day/night shifts
- Previous stock control and quality inspection experience
- Experience working within a fast paced production environment with a proven track record of hitting strict work orders
- Great attention to detail and a great can do attitude
If you are succesful in return you will get:
- Full training provided in house
- Competitive salary
- On-site parking
If youre interested in this Machine Operative role in Poole apply today with your CV Ben will be in touch! ....Read more...
Type: Permanent Location: Poole,England
Start: 27/03/2026
Salary / Rate: £15 - £16 per hour
Posted: 2026-03-27 11:32:04
-
Join a nationally renowned manufacturer in the Bradford area as a Mechanical Fitter.
This Mechanical Fitter role offers the chance to work in a clean, structured environment with strong job security and opportunities to develop.
This Mechanical Fitter position is ideal for someone with a background in machine build or mechanical assembly looking for a long-term move.
Key Responsibilities:
Assemble and test products to engineering drawings and specifications
Maintain quality standards and follow all Health & Safety procedures
Support team members and assist with training where required
Identify and escalate faults or non-conformance issues
Complete documentation, production records, and stock control
Maintain 6S standards and contribute to continuous improvement
What's in it for you as a Mechanical Fitter:
Salary of £34,717 on a skilled grade
Early finish every Friday
Staggered day shift (start between 06:00 - 07:30, fixed once agreed)
8-hour days Monday to Thursday, 5.5 hours Friday
Clean, well-organised workshop with modern equipment
Stable, long-term opportunity with development potential
What We're Looking For:
Experience working as a Mechanical Fitter or similar role
NVQ Level 3 (or equivalent) in an engineering discipline
Background in machine build or OEM machinery assembly
Ability to read engineering drawings and work independently
Strong attention to detail and mechanical aptitude
The site is easily accessible from Leeds, Huddersfield, Wakefield, and Halifax.
If you would like to apply for the Mechanical Fitter position, click apply or contact Conor Wood on 01484 645269 for more information.
....Read more...
Type: Permanent Location: Shipley, England
Start: ASAP
Salary / Rate: Up to £34717.00 per annum + + Benefits Package
Posted: 2026-03-27 10:17:25
-
JOB DESCRIPTION
Job Responsibilities:
Combine raw materials to completion of batch specifications in preparation for approval as finished product provided to the packaging lines.
New compounders will also train in a role for tank cleaning.
Follow batch making best practices by adhering to the specific manufacturing procedure
Abide all plant and department specific safety procedures, Bonding-Grounding, LOTO, etc.
Transport raw materials from the warehouse to the assigned workstation and transport completed tanks / batches to designated staging areas.
Utilize hoist for heavy lifting of raw materials
Maintain a professional relationship with quality control personnel concerning batch adjustments and communication
Increase job knowledge on a daily basis consulting the department supervisor and co-workers with questions and concerns
Daily housekeeping
Job Requirements:
High School (or equivalent)
Effective communications skills - verbal and written.
Grace under pressure - remain positive and focused to the task at hand.
Effective problem-solving skills - quick on your feet and can think outside of the box.
Ability to multi-task and prioritize work all with a sense of urgency.
Benefits
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865Apply for this ad Online! ....Read more...
Type: Permanent Location: Tipp City, Ohio
Posted: 2026-03-26 22:09:42
-
JOB DESCRIPTION
Job Responsibilities:
Combine raw materials to completion of batch specifications in preparation for approval as finished product provided to the packaging lines.
New compounders will also train in a role for tank cleaning.
Follow batch making best practices by adhering to the specific manufacturing procedure
Abide all plant and department specific safety procedures, Bonding-Grounding, LOTO, etc.
Transport raw materials from the warehouse to the assigned workstation and transport completed tanks / batches to designated staging areas.
Utilize hoist for heavy lifting of raw materials
Maintain a professional relationship with quality control personnel concerning batch adjustments and communication
Increase job knowledge on a daily basis consulting the department supervisor and co-workers with questions and concerns
Daily housekeeping
Job Requirements:
High School (or equivalent)
Effective communications skills - verbal and written.
Grace under pressure - remain positive and focused to the task at hand.
Effective problem-solving skills - quick on your feet and can think outside of the box.
Ability to multi-task and prioritize work all with a sense of urgency.
Benefits
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865Apply for this ad Online! ....Read more...
Type: Permanent Location: Tipp City, Ohio
Posted: 2026-03-26 19:06:05
-
JOB DESCRIPTION
The Scheduler/ Planner analyzes and schedules production activities, material equipment, etc.
runs for the scheduling of production and packaging of DAP product to meet market demand for finished product which directly impacts cost, quality, and customer service levels.
Uses knowledge of production process and machine capabilities to analyze manufacturing orders and create production schedules.
Responsibilities:
Schedules manufacturing operations to effectively and efficiently meet the requirements and priorities specified during the scheduling process.
Creates schedule defining the production requirements necessary to meet inventory levels.
Interface with various teams to support material status.
Pulls production data for the next 24 hours for discussion at the daily production meeting.
Meets with Operations Team members to discuss delivery, performance, and quality issues and works with them to expedite production in order to meeting increasing or earlier than expected production demands.
Reviews production schedule, low inventory report, critical inventory report, desired production levels and staffing.
Resolves production planning issues.
Prepares various reports.
Revises schedules as needed to accommodate changes in execution.
Monitors production schedules and communicates shortages that can be covered by stock transfers from other plants.
Assist with additional schedules to cover shortages at other plants when necessary.
Plans annual physical inventory activities and other special projects as necessary.
Interface with the department manager and the Corporate SIOP team to control inventory variances.
May be assigned to other duties as required.
Requirements
Associates degree preferred.
1 - 3 years of experience in relevant field.
Analytical skills in forecasting and anticipation of production needs.
Strong interpersonal skills.
Familiar with SAP and the scheduling codes associated with the program (CM29).
Statistical control skills.
Experience working in an Inventory Control, Materials, Purchasing or Production Planning environment.
No disciplinary actions of Written Warning or higher within the last year.
Logical reasoning abilities; knowledge of processes, applications, terminology, forecasting and facility capabilities.
Basic PC/Windows skills.
Benefits
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Austin, Texas
Posted: 2026-03-25 14:10:23
-
JOB DESCRIPTION
The Scheduler/ Planner analyzes and schedules production activities, material equipment, etc.
runs for the scheduling of production and packaging of DAP product to meet market demand for finished product which directly impacts cost, quality, and customer service levels.
Uses knowledge of production process and machine capabilities to analyze manufacturing orders and create production schedules.
Responsibilities:
Schedules manufacturing operations to effectively and efficiently meet the requirements and priorities specified during the scheduling process.
Creates schedule defining the production requirements necessary to meet inventory levels.
Interface with various teams to support material status.
Pulls production data for the next 24 hours for discussion at the daily production meeting.
Meets with Operations Team members to discuss delivery, performance, and quality issues and works with them to expedite production in order to meeting increasing or earlier than expected production demands.
Reviews production schedule, low inventory report, critical inventory report, desired production levels and staffing.
Resolves production planning issues.
Prepares various reports.
Revises schedules as needed to accommodate changes in execution.
Monitors production schedules and communicates shortages that can be covered by stock transfers from other plants.
Assist with additional schedules to cover shortages at other plants when necessary.
Plans annual physical inventory activities and other special projects as necessary.
Interface with the department manager and the Corporate SIOP team to control inventory variances.
May be assigned to other duties as required.
Requirements
Associates degree preferred.
1 - 3 years of experience in relevant field.
Analytical skills in forecasting and anticipation of production needs.
Strong interpersonal skills.
Familiar with SAP and the scheduling codes associated with the program (CM29).
Statistical control skills.
Experience working in an Inventory Control, Materials, Purchasing or Production Planning environment.
No disciplinary actions of Written Warning or higher within the last year.
Logical reasoning abilities; knowledge of processes, applications, terminology, forecasting and facility capabilities.
Basic PC/Windows skills.
Benefits
Medical, Dental and Vision Insurance
Company Provided Life Insurance
Paid Time Off (PTO)
Company-paid short-term and long-term disability
401(k) plans
Employer-funded pension plan
Tuition Reimbursement
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Austin, Texas
Posted: 2026-03-25 14:10:20
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers, and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc., and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India, and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial, and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Coordinates all EPS/XPS foam cutting and provides parts to the production team to fulfill orders.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Safely and effectively operate foam cutting machines to produce maximum yield with minimum waste.
Cut EPS / XPS foam using a two-axis profile cutting machine.
Safety and efficiently operate down cutter/slabber equipment.
Process internal work orders by cutting required EPS / XPS foam parts.
Develop pre-production EPS foam prototypes for production planning.
Track EPS foam billets and work with procurement to maintain adequate stock.
Write G codes for the profile cutter.
Perform regular quality control inspections.
Measure parts with a tape measure to maintain the specified tolerance and adjust codes as necessary.
Work closely and collaboratively with the production team to plan the production process for each order.
Maintain and troubleshoot foam cutting equipment.
Help develop better systems and processes to produce and package finished goods.
Work closely with cross-functional teams to meet project deadlines and deliverables.
EDUCATION REQUIREMENT:
Associate degree or equivalent from a two-year college or technical school; or equivalent professional/trade certifications or equivalent experience.
EXPERIENCE REQUIREMENT:
Two to four years related experience and/or training as a machine operator or CNC programmer.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
CAD/CAM software proficiency; experience with software such as Mastercam, SolidWorks, or specialized foam-cutting CAM packages to design and generate G-code.
Ability to write, debug, and edit G-code to optimize tool paths, minimize, and manage tool changes.
Understanding of different foam densities and rigidities, and the ability to adjust cutting speeds (14,000-17,000 RPM) and feed rates (50-100 mm/s) to avoid burning or excessive melting.
Expertise in selecting appropriate cutting tools, such as single-flute end mills for high-speed, clean cuts, or hot-wire, along with proper tool length to minimize vibrations.
Skill in setting up CNC routers, hot-wire cutters, or vertical cutting machines, including vacuum table setups for holding lightweight foam.
Ability to interpret complex technical drawings and use precision measuring tools (calipers, micrometers) to ensure parts meet tight tolerances.
Capable of performing routine maintenance, such as changing or sharpening blades, and resolving issues like tool breakage, material deflection, or poor surface finish.
Ability to handle, lift, and maneuver large, lightweight, and bulky foam blocks (often up to 50+ lbs).
Strict adherence to safety protocols, including managing fire hazards (foam can be flammable), proper ventilation for dust extraction, and using appropriate PPE (safety glasses, masks).
Attention to detail; critical for ensuring accurate cuts, especially with complex shapes, to minimize waste.
Ability to solve problems, troubleshoot machine errors, and optimize processes to reduce cycle times.
Ability to effectively communicate and collaborate with design and production teams.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, use hands, reach, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $22.00 and $25.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2026-03-25 14:10:15
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers, and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc., and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India, and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial, and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Coordinates all EPS/XPS foam cutting and provides parts to the production team to fulfill orders.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Safely and effectively operate foam cutting machines to produce maximum yield with minimum waste.
Cut EPS / XPS foam using a two-axis profile cutting machine.
Safety and efficiently operate down cutter/slabber equipment.
Process internal work orders by cutting required EPS / XPS foam parts.
Develop pre-production EPS foam prototypes for production planning.
Track EPS foam billets and work with procurement to maintain adequate stock.
Write G codes for the profile cutter.
Perform regular quality control inspections.
Measure parts with a tape measure to maintain the specified tolerance and adjust codes as necessary.
Work closely and collaboratively with the production team to plan the production process for each order.
Maintain and troubleshoot foam cutting equipment.
Help develop better systems and processes to produce and package finished goods.
Work closely with cross-functional teams to meet project deadlines and deliverables.
EDUCATION REQUIREMENT:
Associate degree or equivalent from a two-year college or technical school; or equivalent professional/trade certifications or equivalent experience.
EXPERIENCE REQUIREMENT:
Two to four years related experience and/or training as a machine operator or CNC programmer.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
CAD/CAM software proficiency; experience with software such as Mastercam, SolidWorks, or specialized foam-cutting CAM packages to design and generate G-code.
Ability to write, debug, and edit G-code to optimize tool paths, minimize, and manage tool changes.
Understanding of different foam densities and rigidities, and the ability to adjust cutting speeds (14,000-17,000 RPM) and feed rates (50-100 mm/s) to avoid burning or excessive melting.
Expertise in selecting appropriate cutting tools, such as single-flute end mills for high-speed, clean cuts, or hot-wire, along with proper tool length to minimize vibrations.
Skill in setting up CNC routers, hot-wire cutters, or vertical cutting machines, including vacuum table setups for holding lightweight foam.
Ability to interpret complex technical drawings and use precision measuring tools (calipers, micrometers) to ensure parts meet tight tolerances.
Capable of performing routine maintenance, such as changing or sharpening blades, and resolving issues like tool breakage, material deflection, or poor surface finish.
Ability to handle, lift, and maneuver large, lightweight, and bulky foam blocks (often up to 50+ lbs).
Strict adherence to safety protocols, including managing fire hazards (foam can be flammable), proper ventilation for dust extraction, and using appropriate PPE (safety glasses, masks).
Attention to detail; critical for ensuring accurate cuts, especially with complex shapes, to minimize waste.
Ability to solve problems, troubleshoot machine errors, and optimize processes to reduce cycle times.
Ability to effectively communicate and collaborate with design and production teams.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, use hands, reach, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $22.00 and $25.00.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2026-03-25 14:09:55
-
Parts Controller / Bodyshop Parts Advisor vacancy:
- Salary: Up to £40,000 per annum
- Overtime paid at time and a half
- Mon - Fri 8am - 5pm (Flexible), 1 hour lunch
- Great Family Feel Environment
- Permanent vacancy
I have a fantastic opportunity for an experienced Parts Controller / Bodyshop Parts Advisor to join an expanding team at a Bodyshop in the Chingford area.
Skills and experience required as a Parts Controller / Bodyshop Parts Advisor:
- Works together with colleagues to support the achievement of increased profit and sales
- Committed to achieving excellent customer relations and ensuring that customers expectations are exceeded
- Can demonstrate experience in a parts department, Dealership or Bodyshop backgrounds considered.
- A good technical understanding of how motor vehicles work and a willingness to keep technical knowledge updated in order to provide the most efficient service possible
- Knowledge of Advance is desirable
Parts Controller / Bodyshop Parts Advisor roles and responsibilities:
- Supplying workshop technicians with parts
- Ordering, booking out parts, invoicing, and taking payment
- Checking in parts deliveries
- Assisting with parts stock check
If you want to hear more about the Parts Controller / Parts Consultant role, please send us your CV by clicking apply now or by contacting Piam on 01202552915 / piam@holtautomotive.co.uk to discuss further.
Parts Controller / Parts Consultant £40,000 Chingford Bodyshop
Parts Advisor / Parts Consultant / Bodyshop Parts Coordinator ....Read more...
Type: Permanent Location: Chingford,England
Start: 25/03/2026
Salary / Rate: £40000 per annum
Posted: 2026-03-25 12:35:06
-
Dispensing Optician Manager - Independent Opticians - Bishop's Stortford - £30,000-£38,000 Full-Time | Independent Optical Practice | Hertfordshire
Zest Optical are working with a patient-focused independent Opticians in Bishop's Stortford to recruit a Dispensing Optician Manager to lead their experienced and friendly team.
This is an excellent opportunity for a qualified Dispensing Optician to step into a leadership role within a modern, community-focused practice known for its relaxed, personal service and clinical excellence.
Dispensing Optician Manager - Key Responsibilities
Lead and manage a close-knit team of 4-5 people in a supportive, forward-thinking environment
Work alongside another experienced Dispensing Optician, who is in practice 4 days a week
Deliver an exceptional patient journey in a single testing room practice with genuine growth potential
Build strong patient relationships in a practice with a warm, homely feel
Dispense a wide selection of designer and luxury frames, including Chanel, Tom Ford, Lindberg, Oakley, Prada, Ray-Ban, and Tiffany & Co.
Provide specialist dispensing services including paediatric eyewear and myopia control
Support training and development of the wider team
Manage stock, orders, and supplier relationships
Contribute ideas to shape how the practice is run and developed
5 days per week, including some Saturdays (Not all required)
Working hours: 9am-5.30pm
About the Practice
Independent practice with an excellent local reputation
Focus on high-quality clinical care and long-term patient relationships
Zeiss and Essilor lens specialists
Fully paperless with modern digital systems
Calm, boutique-style setting with time to focus on each patient
Run by invested owners with a clear vision for the future
Salary & Benefits
Salary: £30,000-£38,000 (depending on experience)
GOC and professional fees paid
Pension scheme
Staff discounts on products
Regular training and development opportunities
Workplace wellness support
Friendly and supportive working environment with autonomy and input into the business
Candidate Requirements
GOC-registered Dispensing Optician
Previous management or team leadership experience is desirable
Friendly, confident, and passionate about patient care
Comfortable using modern systems and digital workflows
Interest in fashion and styling would be beneficial
Team-oriented with a proactive, hands-on approach
Eager to play a key role in developing an independent business
Apply Now
If you're ready to take the next step in your optical career and would thrive in a welcoming, progressive independent practice, we'd love to hear from you.
To apply, please send your CV to Rebecca Wood via the Apply link. Alternatively, feel free to get in touch directly for a confidential chat: ....Read more...
Type: Permanent Location: Bishop's Stortford, England
Salary / Rate: £30000 - £38000 per annum
Posted: 2026-03-25 12:08:30
-
Dispensing Optician - Independent Opticians - Bishop's Stortford - £30,000-£38,000 Full-Time | Independent Optical Practice | Hertfordshire
Zest Optical are working with a patient-focused independent Opticians in Bishop's Stortford to recruit a Dispensing Optician to join their experienced and friendly team.
This is an excellent opportunity for a qualified Dispensing Optician to step into a leadership role within a modern, community-focused practice known for its relaxed, personal service and clinical excellence.
Dispensing Optician - Key Responsibilities
Lead and manage a close-knit team of 4-5 people in a supportive, forward-thinking environment
Work alongside another experienced Dispensing Optician, who is in practice 4 days a week
Deliver an exceptional patient journey in a single testing room practice with genuine growth potential
Build strong patient relationships in a practice with a warm, homely feel
Dispense a wide selection of designer and luxury frames, including Chanel, Tom Ford, Lindberg, Oakley, Prada, Ray-Ban, and Tiffany & Co.
Provide specialist dispensing services including paediatric eyewear and myopia control
Support training and development of the wider team
Manage stock, orders, and supplier relationships
Contribute ideas to shape how the practice is run and developed
5 days per week, including some Saturdays (Not all required)
Working hours: 9am-5.30pm
About the Practice
Independent practice with an excellent local reputation
Focus on high-quality clinical care and long-term patient relationships
Zeiss and Essilor lens specialists
Fully paperless with modern digital systems
Calm, boutique-style setting with time to focus on each patient
Run by invested owners with a clear vision for the future
Salary & Benefits
Salary: £30,000-£38,000 (depending on experience)
GOC and professional fees paid
Pension scheme
Staff discounts on products
Regular training and development opportunities
Workplace wellness support
Friendly and supportive working environment with autonomy and input into the business
Candidate Requirements
GOC-registered Dispensing Optician
Friendly, confident, and passionate about patient care
Comfortable using modern systems and digital workflows
Interest in fashion and styling would be beneficial
Team-oriented with a proactive, hands-on approach
Eager to play a key role in developing an independent business
Apply Now
If you're ready to take the next step in your optical career and would thrive in a welcoming, progressive independent practice, we'd love to hear from you.
To apply, please send your CV to Rebecca Wood via the Apply link. Alternatively, feel free to get in touch directly for a confidential chat: ....Read more...
Type: Permanent Location: Bishop's Stortford, England
Salary / Rate: £30000 - £38000 per annum
Posted: 2026-03-25 12:04:37
