-
JOB DESCRIPTION
Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance.
This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards.
Essential Functions:
Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed;
Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports.
Ensure all are met with best practices and are compliant.
This pertains to Federal, State, and Local regulations i.e.
RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE;
Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices.
Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.;
Be aware concerning all city, state and federal compliance regulations;
Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel.
This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc.
All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees.
Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans;
Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department.
Assistance will be given from other staff to prepare and maintain this data;
Participate and help conduct Safety Committee meetings;
Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program.
Maintain the OSHA 300 log and tracking.
Manage medical monitoring program;
Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs;
Select and maintain safety equipment and safety supplies on site.
To include purchasing and keeping track of the supplies and managing the costs of these supplies;
Reduce waste generation and costs of disposal.
Upgrade monitoring, testing and instrumentation of waste and byproducts.
Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles;
Improve overall safety, housekeeping and reliability of plant work areas and compliance systems;
Member of the PSM team;
Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program.
Maintain, create and close work orders.
Keep Asset List up to date within Faciliworks database.
Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed;
Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived.
Become proficient in generating, reviewing and updating SDS's and Labels for our product line.
This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department;
Supervise, coach, motivate and develop staff.
Minimum Requirements:
Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described;
Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes.
Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset;
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position)
Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position)
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines;
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally;
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications.
Experience using SAGE Platinum for Windows preferred.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management;
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction;
Demonstrated leadership and vision managing staff groups and major projects or initiatives;
Outstanding interpersonal relationship building and employee coaching and development skills.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-09-04 15:11:49
-
Senior Mechanical Design Engineer |Bournemouth
Location: Bournemouth, Dorset
Salary: Competitive + Excellent Benefits
Are you an experienced Mechanical Design Engineer looking to work on innovative mechanical and electromechanical products used across industries including healthcare, mobility, transport, leisure and industrial automation? Are you looking to take the next step in your career?
An established UK engineering and manufacturing business is looking to recruit a talented Senior Mechanical Design Engineer to join its Product Development team.
This is an exciting opportunity to take ownership of new product development projects from concept through to production, while working with a collaborative team in a technically advanced manufacturing environment.
The Role as Mechanical Design Engineer based in Bournemouth
Reporting to the Head of Innovation, you will play a key role in designing and developing new products, improving existing designs, supporting new product introduction (NPI) and ensuring products meet customer requirements, engineering standards and manufacturing objectives.
You will also act as the technical lead for key customer projects, collaborating with cross-functional teams to deliver innovative engineering solutions.
Key Responsibilities for the Senior Mechanical Design job in Bournemouth
Lead the technical development of new customer and product roadmap projects.
Design and develop mechanical and electromechanical products from concept through to production.
Create 3D CAD models, engineering drawings and technical documentation using SolidWorks.
Produce supporting engineering documentation including product specifications, validation plans and compliance documentation.
Optimise existing products to improve performance, reliability, manufacturability and cost.
Conduct engineering calculations and simulations to validate designs.
Work closely with Manufacturing, Production Engineering, Quality, Purchasing, Testing and Project Management teams during product development.
Raise and manage Engineering Change Requests (ECRs).
Support prototype builds, testing and production handover.
Review concessions and first-off approvals.
Ensure designs comply with relevant engineering standards and regulatory requirements.
Mentor and support less experienced engineers where appropriate.
About You
Essential Skills & Experience
Degree qualified in Mechanical Engineering, Electromechanical Engineering or equivalent industry experience.
Proven experience in mechanical product design and development.
Strong SolidWorks CAD experience.
Experience of manufacturing processes including castings, machined components and moulded parts.
Knowledge of Design for Manufacture (DFM) and Design for Assembly (DFA).
Experience with APQP, PPAP and Design & Process FMEA.
Understanding of manufacturing ERP systems such as SAP, IFS, Priority or similar.
Excellent problem-solving and analytical skills.
Strong project management and organisational abilities.
Ability to manage multiple engineering projects simultaneously.
Excellent communication skills with the ability to work across multidisciplinary teams.
Desirable Skills
Knowledge of electric motors, gearboxes, drivetrains or rotating machinery.
PCB design experience.
Understanding of CE, UKCA, UL, EMC and IP approvals.
SolidWorks EPDM experience.
Knowledge of KissSoft Gear Design software.
Experience with MotorSolve software.
Lean Manufacturing and Continuous Improvement experience.
Why Apply?
This is an excellent opportunity to join an innovative engineering manufacturer that designs and develops high-quality products supplied to customers around the world.
You'll benefit from:
Working on technically challenging engineering projects
Ownership of projects from concept through to production
Modern engineering and manufacturing facilities
Career development and progression opportunities
Collaborative and supportive engineering culture
Competitive salary and comprehensive benefits package
Apply Today
If you are an experienced Mechanical design Engineer, looking for a step into a Senior position, in Bournemouth, we'd love to hear from you.
Please send you cv over to nking@redlinegroup.Com or call 01582878839 for more information. ....Read more...
Type: Permanent Location: Bournemouth, England
Start: ASAP
Salary / Rate: £40000 - £50000 per annum
Posted: 2026-09-04 12:02:44
-
Our client, who are a well-established UK electronics manufacturer with a rapidly growing innovation and product development division, are looking for an Electronics Engineer - Newbury to join their team on a permanent basis.
This role is based on-site in Newbury, within a fast-paced and highly capable engineering environment that combines design, PCB fabrication, and assembly under one roof.
You will work across a wide variety of industries including aerospace, automotive, industrial, and IoT, leading full lifecycle product development projects from concept through to production.
Key responsibilities of the Electronics Engineer job based in Newbury:
Lead end-to-end electronics product development projects, from initial concept and specification through to prototyping and production.
Design innovative electronic systems and supporting embedded firmware.
Create schematics and PCB layouts using Altium Designer.
Develop and execute test strategies for both hardware and embedded software.
Act as the technical lead/architect on projects, collaborating with cross-functional teams where required.
Support prototype build, board bring-up, and validation activities.
Participate in design reviews and contribute to continuous improvement within an agile development environment.
Maintain accurate project documentation and manage tasks within tools such as Jira.
Ensure designs meet industry standards, manufacturability requirements, and cost targets.
Experience required for the Electronics Engineer job based in Newbury:
Degree, HNC, or HND in Electronic Engineering (or equivalent industry experience).
Strong proficiency in PCB design, schematic capture, and BOM creation using Altium Designer.
Experience with embedded systems and communication protocols such as SPI, I2C, UART, Ethernet, CAN, or LIN.
Proven ability to troubleshoot and resolve hardware and embedded software issues.
Experience working across the full product lifecycle within an agile development environment.
Familiarity with version control tools (e.G.
Bitbucket) and task management systems (e.G.
Jira).
Knowledge of EMC testing, compliance standards, and design for manufacture is highly desirable.
Strong communication skills and ability to lead technical discussions with customers and internal teams.
If this Electronics Engineer job in Newbury could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816. ....Read more...
Type: Permanent Location: Newbury, England
Start: ASAP
Salary / Rate: £40000 - £55000 per annum
Posted: 2026-09-04 11:59:16
-
Security Systems Engineer
Covering London & Home Counties
- £40,000-£50,000 + £5,000 On-Call Allowance
KHR Recruitment are currently working with an established and growing security systems company who are looking for an experienced Installation Engineer to join their close-knit team.
This is a hands-on role focused on the installation, commissioning and maintenance of intruder alarm and CCTV systems, working across London and the Home Counties.
The role would ideally suit an engineer with 5+ years' experience within the electronic security industry, although candidates with less experience who demonstrate strong technical ability, a positive attitude and a willingness to learn will also be considered.
The Role
- Install, commission and service professional intruder alarm systems
- Install and configure CCTV systems
- Carry out system testing, commissioning and customer handovers
- Install and commission systems connected to monitoring stations
- Diagnose and resolve technical faults on site
- Manage installations independently from start to finish
- Work alongside other engineers on larger or more complex projects
- Maintain a professional approach when working on customer premises
- Ensure all work is completed safely and to a high standard
- Maintain and look after company vehicle and equipment
Technical Experience
Strong experience with professional intruder alarm systems is required.
Experience with the following would be advantageous:
- Orisec - particularly desirable
- Pyronix
- Scantronic
- Texecom
- Galaxy
Candidate Profile
- Ideally has 5+ years' experience in the electronic security industry
- Strong practical installation and commissioning experience
- Experience with intruder alarms and CCTV
- Confident working independently and managing jobs from start to finish
- Excellent fault-finding and problem-solving skills
- Takes pride in the quality of their work
- Professional and confident dealing with customers
- Works well as part of a small team
- Positive attitude and a willingness to continue developing their skills
- Holds a full UK driving licence
- Comfortable travelling throughout London and the Home Counties
Hours & Travel
Monday-Friday, 8:00am-5:00pm
Engineers are expected to be on site and ready to start work at 8:00am.
Due to the nature of the role, travel across London and the Home Counties is required.
Additional payments are made where extended working days are caused by travel.
On-Call
There is a one-week-in-eight on-call rota, which attracts an additional £5,000 per annum.
Package
- £40,000-£50,000 salary, depending on experience
- £5,000 on-call allowance
- 28 days' annual leave
- Company van and equipment provided
- Ongoing technical development opportunities
- Varied work across London and the Home Counties
- Friendly, experienced and supportive team environment
At KHR, we take care to ensure that you are represented as well as possible, so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regard to a specific role, then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics, etc, please could you also submit a "clean" copy in Word.
Thank you.
Knowledge House Resourcing Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of Knowledge House Resourcing Ltd.
Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: Sevenoaks, England
Start: 30/09/2026
Salary / Rate: £40000 - £50000 per annum + On-call & Overtime Bonuses, Van & Tools
Posted: 2026-09-04 11:00:44
-
Electronics Engineer - Security Clearence - Cambridge
An opportunity has opened for an Electronics Engineer to join a specialist technology group based on a modern science park just outside Cambridge.
The work centres on developing advanced electronic systems that contribute directly to the UK's safety and resilience.
Everything here is focused on defensive innovation, and the pace of growth means you'd be stepping into an environment with strong momentum and long‑term investment behind it.
In this role, you'll be involved in projects that move rapidly from early ideas to working prototypes.
You'll work alongside engineers, scientists and designers from a range of backgrounds, shaping concepts, testing approaches and turning complex requirements into practical solutions.
The work covers the full development cycle, from initial system understanding through to design, documentation, hands‑on testing and final delivery.
It's varied, technically stretching and ideal for someone who enjoys solving real‑world engineering challenges.
The team is made up of people who are naturally curious and enjoy pushing the boundaries of what's possible.
Whether you're leading a project or contributing as part of a wider group, you'll be in an environment that encourages collaboration, knowledge‑sharing and continuous development.
It's a place where you can build a long‑term career in high‑end R&D.
You'll bring a strong academic background and experience developing complex electronic systems.
You should be comfortable working across hardware design, schematic capture, PCB layout, board bring‑up and testing, with exposure to areas such as embedded development, FPGA work, DSP, signal processing, high‑speed or RF design, or communications protocols.
The exact mix is flexible — what matters most is sound engineering judgement and the ability to contribute effectively within multidisciplinary teams.
The organisation offers a supportive culture, a well‑equipped campus environment and a comprehensive benefits package.
Relocation support is available where needed, and there's an active social side to the business, from sports groups to creative activities.
Given the nature of the work, existing security clearance is ideal, though the ability to obtain clearance is essential.
Interest in this role is expected to be high, so early applications are encouraged.
To discuss the position in more detail, you can contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240.
You can also submit your CV and a member of the team will be in touch to talk through next steps. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Pension, bonus, medical etc.
Posted: 2026-09-04 09:01:28
-
C# WPF Software Engineer - Electronics
Are you a Software Engineer with provable commercial experience working on software connecting to devices?
If so, my client has an exciting opportunity for you!
You will play a key role in designing, developing and implementing software for cutting-edge optical machinery used within advanced manufacturing environments.
In this role as a C# WPF Software Engineer - Electronics based in Oxfordshire, you will be responsible for the following:
Developing and maintaining software applications using C# and WPF for specialist industrial machinery.
Designing, implementing and testing software that interfaces directly with hardware and machine control systems.
Working closely with multidisciplinary engineering teams including Electronics, Mechanical and R&D
Engineers to deliver innovative solutions.
Supporting the development of new products and continuous improvement of existing software platforms.
Contributing throughout the full software development lifecycle from design through to deployment.
The successful applicant for this C# WPF Software Engineer - Electronics role based in Oxfordshire will:
Have provable commercial experience developing software using C# and WPF.
Have experience developing software that interfaces directly with hardware or industrial machinery.
Hold a degree in Software Engineering, Computer Science, Electronics or a related engineering discipline.
Have a strong understanding of object-oriented programming principles.
Any experience with MVVM, machine vision, OpenCV, image processing or industrial automation would be advantageous.
This is an exciting opportunity to join a growing organisation that designs and manufactures highly specialised optical machinery, offering excellent long-term career development and the opportunity to work on genuinely innovative technology.
To apply for the role of Software Design Engineer based in Oxfordshire, please send your CV to NDrain@redlinegroup.Com, or for more information contact Nick Drain on 01582 878828. ....Read more...
Type: Permanent Location: Abingdon, England
Start: ASAP
Salary / Rate: £35000 - £47000 per annum
Posted: 2026-09-04 09:01:01
